Public Works Department Tender
View complete overview of Uttarakhand PWD Tender
Public Works Department - PWD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date15 Feb 2024
Closing DateCancelled
Tender Amount₹ 7,10,62,501
Costs
EMD
₹ 14,94,000Document Cost
₹ 5,900Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_pwd_69616_1Bid Award Id
ViewTender No
719/544yatayat-7/2024 Dated. 08-02-2024Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://pwd.uk.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. Ordinary Rock
55.53
-
-
... More
Extra for every additional Lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. All kinds of soil
41.41
-
-
... More
EExtra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. Ordinary rock
10.37
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
212.64
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)
27.11
-
-
... More
RENFORCED CEMENT CONCRETE WORK
-
-
-
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.
(Note :- Cement content considered in this item is @ 330 Kg/CuM. Excess/ less cement used as per design mix is payable/recoverable separately).
-
-
-
... More
All works upto plinth level
44.02
-
-
... More
All works above plinth level upto floor V level
51.22
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
... More
Thermo-Mechanically Treated bars of grade Fe-500D or more
2308.83
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
-
-
-
... More
Thermo-Mechanically Treated bars of grade Fe-500D or more.
9328.5
-
-
... More
CENTRING AND SHUTTRING
-
-
-
... More
Centring and Shuttering for Foundations, footings, bases of columns, etc. for mass concrete
83.88
-
-
... More
Centring and shuttering for Lintels, beams, plinth beams, girders, bressumers and cantilevers
180.28
-
-
... More
Centring and shuttering for Columns, Pillars, Piers, Abutments, Posts and Struts
176.66
-
-
... More
MASONRY & PLASTER WORK
-
-
-
... More
Random Rubble Masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand)
39.56
-
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
-
-
-
... More
Cement mortar 1:4 (1 cement : 4 coarse sand)
12.24
-
-
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.
-
-
-
... More
Cement mortar 1:4 (1 cement :4 coarse sand)
16.24
-
-
... More
Extra for forming cavity 5 cm to 11.5 cm wide in cavity walls with necessary weep and vent holes including use of cores and cost of providing and fixing bitumastic coated M .S. ties 300 mm long of 25x3 mm section at not less than 3 ties per sqm as per approved design.
8.13
-
-
... More
Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) :
Red Sand Stone - Exposed face fine dressed with rough backing.
* Locally Available Regional HImalyan Stone is proposed instead of Red Sand Stone
-
-
-
... More
WALL ( 450 mm x 200 mm x 50 mm )
117.28
-
-
... More
FLOOR ( 450 mm x 350 mm x 70 mm )
14.99
-
-
... More
Providing and fixing cramps of required size & shape in RCC/ CC / Brick masonry backing with cement mortar 1:2 ( 1 cement :2 coarse sand), including drilling necessary hole in stones and embedding the cramp in the hole (fastener to be paid separately).
-
-
-
... More
Stainless steel cramps
130.32
-
-
... More
Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface
backing including drilling necessary holes and the cost of bolt etc complete.
-
-
-
... More
Wedge expansion
-
-
-
... More
Fastener with threaded dia 10 mm
1304
-
-
... More
12 mm Cement Plaster of mix : 1: 6 (1 cement: 6 fine sand)
80.85
-
-
... More
FLOORING
-
-
-
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick
26.4
-
-
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab upto 0.50 sqm
14.29
-
-
... More
M.S. & STEEL WORK
-
-
-
... More
Providing and fixing M.S. grills / Railings of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding
1865.32
-
-
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
-
-
-
... More
Hot finished welded type tubes
27033
-
-
... More
WOOD WORK
-
-
-
... More
Deodar wood hand rail having size of 90 mm x 75 mm size with approved decorative shape etc..
91.38
-
-
... More
P/F Deodar Wood Jhalar (Manually Hand Carved) in 25 mm thick 300 mm wide deodar wood plank.
55.81
-
-
... More
Providing and fixing Deodar Wood ceiling in 25 mm thick 150 mm wide deodar wood plank.
199.62
-
-
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Saal Wood
0.07
-
-
... More
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
8
-
-
... More
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.
(Note:- Butt hinges and necessary screws shall be paid separately)
-
-
-
... More
Second class teak wood
-
-
-
... More
35 mm thick shutters
2.27
-
-
... More
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.
1 mm thick
4.2
-
-
... More
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum
depth on all edges of flush door shutters (over all area of door shutter to be
measured).
2.1
-
-
... More
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Float glass panes 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm).
0.22
-
-
... More
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete Model no- VX Size (200x12) mm (vintage brass)
1
-
-
... More
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete Model no- VX Size (150x12)mm, (Vintage Brass)
1
-
-
... More
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : Size (125x75x4) mm, (vintage brass)
6
-
-
... More
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. Model No- DS 02 Size: 140 mm (Vintage Brass)
1
-
-
... More
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body,door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. Aluminium extruded section body tubular type universal hydraulic door closer DC 80 PDC
1
-
-
... More
Providing and fixing 2nd class deodar wood plain lining tongued and grooved, including wooden plugs complete with necessary screws and priming coat on unexposed surface. Details of cost for 10 sqm
52.22
-
-
... More
Providing, laying and fixing of Deodar Wood as in built runner having size of 100mmX60 mm through out over masonary course during construction of wall as per detail drawing. It allows to apply adhesive on top and bottom of wood surface with additional fixing accessories of GI nut & bolt/ anchor fastners, nails, screws etc.. to masonary work or provided RCC runner to protect against demormation with all due respect to complete the job. It allows providing and applying minimum two coats of approved water base PU polishing complete with required primer / sealer coat, rubbing, sand papering, powdering, etc. to exposed surface complete as per manufacturer specification.
53.23
-
-
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S.
laths, interlocked together through their entire length and jointed together at the
end by end locks, mounted on specially designed pipe shaft with brackets, side
guides and arrangements for inside and outside locking with push and pull operation
complete, including the cost of providing and fixing necessary 27.5 cm long wire
springs manufactured from high tensile steel wire of adequate strength conforming
to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.
80x1.25 mm M.S. laths with 1.25 mm thick top cover
2.88
-
-
... More
Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in
position with necessary stainless steel screws etc.
Sal wood
4.38
-
-
... More
FINISHING & PAINTING WORK
-
-
-
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete
80.85
-
-
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
-
-
-
... More
Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
100.02
-
-
... More
French spirit polishing :
-
-
-
... More
Two or more coats on new works including a coat of wood filler
-
-
-
... More
Hydro Oil For Exterior Coating
412.08
-
-
... More
Finishing with Deluxe Multi surface paint system for interiors and exteriors using
Primer as per manufacturers specifications :
-
-
-
... More
Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one
coat of Special primer applied @ 0.75 ltr /10 sqm
80.85
-
-
... More
Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :
-
-
-
... More
Two or more coats on new work
0.83
-
-
... More
ROOF
-
-
-
... More
Supply, transportation, installation, fitting & fixing and supervision of Laminated Asphalt Shingles having multilayer Panel produce three dimensional profile and shadow lines with fiber glass mat, Waterproof, durable coating, temper proof, 110mph wind resistance, UL Class-A, fire resistance rating, exposure 5.5/ 8 inch, weight up to 450 Pound/ 100 Sqft. Or more, high end products last 30 years & more as per instructions laid on ASTM D3462, ASTM D3018, ASTM D7158-Class-H. The Laminated Asphalt Shingles as per specifications must be laid in proper way over 20mm Cement Fiber Board Make - Everest or Eq. and moisture barrier membrane and Algae resistant Ridge with all required fixtures & fastenings as a complete job as per instructions and satisfaction of Engineer-in-charge with contractors’ own material, labour, tools, lead, lift, T&P, etc. The design and methodology to be approved by Eingeer-in-charge prior commencement of the work. The rate included cost of materials, transportation to site, installation, fixing, pegging, pre-installation preparation works, supervision, petty works involved, taxes, GST, etc. as a compete job. Note:
(i) Overlapping has to be provided between two laminated Asphalt Shingles sheets as per the norms. The overlap quantity will not be considered for the measurement/ payment
273.96
-
-
... More
CIVIL WORK (Site Development)
-
-
-
... More
FOUNDATION
-
-
-
... More
Earthwork
-
-
-
... More
Excavation in foundation for retaining, breast walls etc, in all types of soils and rocks including all lead, lift and disposal of surplus material as per direction of engineer - in - charge, as per drawing and technical specifications Clause 305.1 of MORD Specifiction
-
-
-
... More
Ordinary soil / rock ( i+ii+iii+iv )
1227.31
-
-
... More
Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5
171.91
-
-
... More
Cement plum Masonry with 40% plum & 60% 1:3:6 cement concrete including supply of all material, labour, T&P etc. required for proper completion of the work. As per drawings and technical specifications Clause 802, 803, 1202 & 1203 of MORD Specifiction
226
-
-
... More
Providing concrete for plain/ reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203
-
-
-
... More
P.C.C grade M 20
56.42
-
-
... More
SUBSTRUCTURE
-
-
-
... More
Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 (For height upto 5 m)
-
-
-
... More
R.C.C. grade M 25
829.4
-
-
... More
Supplying, fitting and placing TMT bar reinforcement (Fe 415) in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202
-
-
-
... More
(The reinforcement steel shall be procured from original (primary) steel producers as per clause no. 2011.3.1 of MORD specifications (First revision'2014) and IS 1786:2008 clause no. 1.6)
152.71
-
-
... More
RIVER TRAINING AND PROTECTION WORKS
-
-
-
... More
DRAINAGE ARRANGEMENT BEHIND RETENTION WALLS
-
-
-
... More
Laying of a Geotextile Filter between pitching and embankment slopes on which pitching is laid to prevent escape of the embankment material through the voids of the stone pitching/cement concrete blocks as well as to allow free movement of water without creating any uplift head on the pitching as per any relevant section 700 and 2504 of specifications.
783
-
-
... More
Hand Packed stone filling in back of wallls including cost of all materials, royality, T&P etc. complete as per direction of Engineer-in- charge. (As per PWD Uttarakhand specifications)
231
-
-
... More
Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with U-PVC- 110 mm dia extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7
360
-
-
... More
Dewatering from foundation of abutments and wing walls (with pump capacity 4000 lit per Hr.) including wages of operator and fuel including supply of all material,
labour and T&P etc. required for proper completion of the work.
720
-
-
... More
MASONRY & PLASTER WORK
-
-
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand)
3.13
-
-
... More
Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) :
Red Sand Stone - Exposed face fine dressed with rough backing.
* Locally Available Regional HImalyan Stone is proposed instead of Red Sand Stone
-
-
-
... More
WALL ( 400 mm x 200 mm x 50 mm )
245.28
-
-
... More
FLOOR ( 450 mm x 300 mm x 70 mm )
369.24
-
-
... More
Providing and fixing cramps of required size & shape in RCC/ CC / Brick masonry backing with cement mortar 1:2 ( 1 cement :2 coarse sand), including drilling necessary hole in stones and embedding the cramp in the hole (fastener to be paid separately).
-
-
-
... More
Stainless steel cramps
272.54
-
-
... More
Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface
backing including drilling necessary holes and the cost of bolt etc complete.
-
-
-
... More
Wedge expansion
-
-
-
... More
Fastener with threaded dia 10 mm
2726
-
-
... More
FLOORING
-
-
-
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab upto 0.50 sqm
Granite of any colour and shade
Area of slab over 0.50 sqm
41.99
-
-
... More
SUB-BASES, BASES ( NON- BITUMINOUS) AND SHOULDERS
-
-
-
... More
Granular Sub-base with Well Graded Material (Table 400.1)
-
-
-
... More
By Mix in Place Method
Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.
-
-
-
... More
For Grading I Material
44.85
-
-
... More
Dry Lean Cement Concrete Sub- base (Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing.)
19.09
-
-
... More
BASES AND SURFACE COURSES
-
-
-
... More
Providing & Laying 100 mm thick cobble stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand), side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar.(Drived item from DSR 11.30.1)
250.91
-
-
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
1.92
-
-
... More
Horticulture Work
-
-
-
... More
Spreading of Sludge Farm Yard Manure or/and good Earth
(Spreading of sludge farm yard manure or/ and good earth in required thickness (cost of sludge, farmyard manure or/and good earth to be paid for separately))
26.95
-
-
... More
Grassing with ' Doobs' Grass
(Grassing with 'Doobs' grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for moving including supplying good earth if needed)
134.73
-
-
... More
Making Lawns including Ploughing and Dragging with 'Swagha' Breaking of Clod
(Making lawns including ploughing and breaking of clod, removal of rubbish, dressing and supplying
doobs grass roots and planting at 15 cm apart, including supplying and spreading of farm yard manure
at rate of 0.18 cum per 100 sqm)
134.73
-
-
... More
Track Route Works
-
-
-
... More
EARTH WORK
-
-
-
... More
Excavation in Cutting in Soil by manual means with lead upto 50 m Excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per Technical Specification Clause 302.3
178.2
-
-
... More
CONCRETE AND CONCRETE PAVEMENT
-
-
-
... More
Providing and laying of stone set pavement over 2.5 cm thick bedding layer of PCC 1:2:4 which shall further be placed over 10 cm thick dry stone kharanja or crushed stones base over a prepared subgrade as per drawings and technical specifications. The size of stones shall not be less than 20 cm x 20 cm and thickness of stones shall vary from 10 cm to 15 cm. The work includes filling of joints with PCC 1:2:4 as per the standard drawings and instructions of the Engineer-in-Charge.
237.6
-
-
... More
Providing concrete for plain/ reinforced concrete in open foundations complete as per drawings
and technical specifications Clause 802, 803, 1202 & 1203
-
-
-
... More
PCC Grade M20
Nominal mix (1:2:4)
35.64
-
-
... More
Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204
-
-
-
... More
R.C.C. grade M 25
75.24
-
-
... More
Supplying, fitting and placing TMT bar reinforcement (Fe 415) in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202
-
-
-
... More
(The reinforcement steel shall be procured from original (primary) steel producers as per clause no. 2011.3.1 of MORD specifications (First revision'2014) and IS 1786:2008 clause no. 1.6)
7.52
-
-
... More
TRAFFIC SIGNS, MARKINGS & OTHER ROAD APPURTENANCES
-
-
-
... More
Tubular Steel Railing on Medium Weight steel channel ( ISMC series) 100 mm x 50 mm (Providing, fixing and erecting 50 mm dia steel pipe railing in 3 rows duly painted on medium weight steel channels (ISMC series) 100 mm x 50 mm, 1.2 metres high above ground, 2 m centre to centre, complete as per approved drawings)
396
-
-
... More
Plumbing Work
-
-
-
... More
Providing and fixing in position 15 mm C.P. brass bib cocks of best quality necessary fittings with wall Flange etc. complete in all respects including cutting and making good the walls etc.
BIB COCK : Jaquar Fusion , Model No. FUS-29037
4
-
-
... More
Providing and fixing of 125 mm Outer dia HDPE PE 100, PN-6 SEWER pipes confirming to IS:14333-2000, fusion welded Joint, including all fittings,special, testing of joints, including trenching, refilling & testing of joints etc. complete as per direction of Engineer-in-Charge.
10
-
-
... More
Providing and fixing of 20 mm Outer dia 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge.
36
-
-
... More
Providing and fixing of 25 mm Outer dia 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge.
40
-
-
... More
Providing and fixing of 32 mm Outer dia 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge.
5
-
-
... More
Providing and fixing of 40 mm Outer dia 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge.
5
-
-
... More
Providing and fixing of 50 mm Outer dia 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge.
486
-
-
... More
Providing and fixing of 63 mm Outer dia 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge.
5
-
-
... More
Supplying, fixing, testing and commissioning of 50mm diameter butterfly valve (manual) with C I body SS Disc, Nitrile Rubber Seal & Oring PN 16 pressure rating as specified.
1
-
-
... More
Providing and fixing of 25mm diameter gun metal non- return valve (vertical) of approved quality
1
-
-
... More
Providing and fixing 40mm gun metal score valve of approved quality.
1
-
-
... More
Supply, Installation, Testing and Commissioning of 25 mm dia. air release valve.
10
-
-
... More
Supply, intallation, Testing and Commisioning of 20mm diameter Garden Hydrant with gun metal Ball Valve, Flexinble hose Connection Provision and all required accessories etc.
4
-
-
... More
Supplying, fitting & fixing of 50mm dia Pressure Reducing Valve set of approved make & best quality having by-pass valve arrangement including of 3 nos isolation valve.
1
-
-
... More
Making connection to Water Supply line / existing tank including breaking them in a systematic way with suitable excavation, dewatering, dismantling of the RCC or masonry wall or pipe line, passing the plumbing water line in the existing structure either through masonry or CC and providing suitable "Y" tee to the connect to existing pipe line, Reconstructions of dismantled existing structure according to the original one to bring to the working conditions tasting etc complete.
1
-
-
... More
6 Kg ABC (Powder Type) Fire Extinguisher. In HP Mild Steel Cylinders ISI marked fitted with pressure indicating gauge, internal tube, squeeze lever type valve fully charged with ABC powder (Mono Ammonium Phosphate) pressured by Nitrogen complete in all respects including wall suspension bracket and conforming to IS:15683
Providing & Fixing of fire extinguishers with necessary accessories, stand, trolley, etc.
2
-
-
... More
ISI Marked portable fire extinguisher, 4.5 kg CO2 type fire extinguishers complete in all respect including initial fill and wall suspension brackets & shall conform to IS 2878
Providing & Fixing of fire extinguishers with necessary accessories, stand, trolley, etc.
2
-
-
... More
PHE Work
-
-
-
... More
WATER SUPPLY& SEWAGE WORKS
-
-
-
... More
LAYING PIPES
-
-
-
... More
Excavation for cable trenches in soft soil, depth upto 1.2 m including dressing of sides lift upto 1.5 m, including getting out the excavated soil, refilling with sand and or good soil after laying of cable/ pipe etc in layers of 20 cm, ramming, watering and disposal of surplus excavated soil as directed, within a lead of 50 metres
320
-
-
... More
Excavation of the cable trenches in hard rock not exceeding 1.5 metres in width, and lift upto 1.5 metres, including getting out the excavated soil and disposal of excavated soil as directed within a lead of 50 metres.
18
-
-
... More
PCC(1:3:6) at bottom of pipe (refer typical section drawing)
-
-
-
... More
1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size)
49.73
-
-
... More
THRUST BLOCK (Refer Typical section drawing)
-
-
-
... More
1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size)
0.71
-
-
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
-
-
-
... More
1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)
5.01
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
-
-
-
... More
Thermo-Mechanically Treated bars of grade Fe-500D or more.
300.6
-
-
... More
RCC MANHOLE :
-
-
-
... More
With FRP surface heavy duty chamber cover
( 600 MM X 600 MM ) with Frame & RCC top slab FOR SEWER (refer Typical Section Drawing)
-
-
-
... More
RCC VALVE CHAMBER WITH FRP surface heavy duty chamber cover(750MM X 750MM) with Frame & RCC top slab FOR WATER CONTROL VALVE (refer typical section drawing)
-
-
-
... More
750 x 750 mm size 0 to 1.5mtr depth
8
-
-
... More
RCC Storm water box drain with precast perforated RCC heavy duty covers, with PCC
-
-
-
... More
600 mm width; depth from 600 to 900 mm
55
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soils / ordinary rock
431.01
-
-
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.
(Note :- Cement content considered in this item is @ 330 Kgs/CuM. Excess/ less cement used as per design mix is payable/recoverable separately).
51.75
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone
aggregate 20 mm nominal size)
17.93
-
-
... More
Form Work : Centring and Shuttering for Foundations, footings, bases of columns, etc. for mass concrete
82
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.
2070
-
-
... More
GULLY TRAPS
-
-
-
... More
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design :
24
-
-
... More
MASONRY WORKS
-
-
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
-
-
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand)
32.59
-
-
... More
12 mm Cement Plaster of mix : 1: 6 (1 cement: 6 fine sand)
141.23
-
-
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
-
-
... More
Civil Work for Electrical
-
-
-
... More
RCC MANHOLE :
-
-
-
... More
With FRP surface heavy duty chamber cover
( 600 MM X 600 MM ) with Frame & RCC top slab FOR SEWER (refer Typical Section Drawing)
-
-
-
... More
ELECTRICAL MANHOLES
31
-
-
... More
EM-I-600x600x1000mm ELECTRICAL MANHOLE
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soils / ordinary rock
339
-
-
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.
(Note :- Cement content considered in this item is @ 330 Kgs/CuM. Excess/ less cement used as per design mix is payable/recoverable separately). All works upto plinth Level
65.8
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone
aggregate 20 mm nominal size)
16.4
-
-
... More
Form Work : Centring and Shuttering for Foundations, footings, bases of columns, etc. for mass concrete
66
-
-
... More
Centring and Shuttering for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
211
-
-
... More
Centring and Shuttering for Suspended floors, roofs, landings, balconies and access platform
26
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.
2632
-
-
... More
Electrical Work (KESHAV PRAYAG AT MANA MASTERPLAN)
-
-
-
... More
LT PANEL
-
-
-
... More
Aprooved Makes-L&T/ABB/schnider/Legrand/SIEMENS
-
-
-
... More
Supply, Installation, testing and commissioning of IP 54 rated EXT. LTG. PANEL-1 Having,
Incomer: 40A, FP MCB (01 No).
1 NO SPD
1 NO LOAD MANAGER WITH RS485 PORT
1 NO. DIGITAL VOLTMETER WITH VOLTAGE SELECTOR SWITCH
1 NO. DIGITAL AMP METER WITH AMETER SELECTOR SWITCH
INDICATION LAMP- 6 NOS (R,Y,B,ON,OFF,TRIP)
CT, 40/5A, CL-1,5VA AUTO MANUAL SWITCH WITH SINGLE CHANNEL DIGITAL TIMER WITH 48HR BATTERY BACK-UP AUTO-MANUAL BY-PASS SWITCH
Out Going: F1 - 25 Amp FP 10KA MCB WITH 25A, TP HEAVY DUTY CONTACTOR
F1-01 TO 05 - 16 Amp FP 10KA MCB (05NOS) F2 - 32 Amp FP 10KA MCB F3 - 25 Amp DP 10KA MCB F4 - 32 Amp FP 10KA MCB F5 - 25 Amp DP 10KA MCB
F6 - 25 Amp FP 10KA MCB
ALSO REFER SLD & DETAIL TECHNICAL SPECIFICATION ALONG WITH THIS. ALL SHOULD BE AS PER SLD & REQUIREMENT.
1
-
-
... More
Supply, Installation, testing and commissioning of IP 54 rated EXT. LTG. PANEL-2 Having,
Incomer: 32A, FP MCB (01 No).
1 NO SPD
1 NO LOAD MANAGER WITH RS485 PORT
1 NO. DIGITAL VOLTMETER WITH VOLTAGE SELECTOR SWITCH
1 NO. DIGITAL AMP METER WITH AMETER SELECTOR SWITCH
INDICATION LAMP- 6 NOS (R,Y,B,ON,OFF,TRIP)
CT, 32/5A, CL-1,5VA AUTO MANUAL SWITCH WITH SINGLE CHANNEL DIGITAL TIMER WITH 48HR BATTERY BACK-UP AUTO-MANUAL BY-PASS SWITCH
Out Going: F1 - 25 Amp FP 10KA MCB WITH 25A, TP HEAVY DUTY CONTACTOR
F1-01 TO 06 - 16 Amp FP 10KA MCB (06NOS) F1-07 TO 10 - 16 Amp SP 10KA MCB (04NOS) F2 - 25 Amp DP 10KA MCB F3 - 16 Amp DP 10KA MCB F4 - 25 Amp DP 10KA MCB F5 - 25 Amp DP 10KA MCB
F6 - 25 Amp FP 10KA MCB
ALSO REFER SLD & DETAIL TECHNICAL SPECIFICATION ALONG WITH THIS. ALL SHOULD BE AS PER SLD & REQUIREMENT
1
-
-
... More
DISTRIBUTION BOARDS
Supply, installation, testing and commissioning following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) - 6way, Double door (IP43, IK09)
1
-
-
... More
Supply, installation, testing and commissioning following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) - 8way, Double door (IP43, IK09)
3
-
-
... More
Supply, installation, testing and commissioning 'B' series, SP MCB Supply, installation, testing and commissioning 5 amps to 32 amps rating, 240 volts, 'B' series, miniature circuit breaker suitable for lighting and other loads of folloeing poles int the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole
12
-
-
... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve,
miniature circuit breaker suitable for inductive load of following poles in the existingMCB DB complete with connections, testing and commissioning etc. as required. Double pole
2
-
-
... More
Supplying and fixing of weatherproof enclosure for double pole, 240 volts, MCB (6A-32A) complete with connections, testing and commissioning etc. as required. Approved Makes-LEGRAND / SCHNIEDER / SIEMENS / L&T / ABB / HENSEL
2
-
-
... More
Supply, installation, testing and commissioning following rating, double pole, (single phase and neutral), 240 V, residual current breaker with overload (RCBO) (RCBO), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required 25A. Approved Makes-LEGRAND / SCHNIEDER / SIEMENS / L&T / ABB
3
-
-
... More
MV CABLES
Laying of PVC insulated and PVC sheathed / XLPE
power cable of 1.1 KV grade of following size in the existing
RCC/ HUME/ METAL/DWC pipe as required.
-
-
-
... More
Upto 35 sq. mm
865
-
-
... More
Laying and fixing of PVC insulated and PVC sheathed / XLPE power
cable of 1.1 KV grade of following size on cable tray as required.
-
-
-
... More
Upto 35 sq. mm (clamped with 1mm thick saddle)
30
-
-
... More
Supply, connection, testing and commissioning of heavy duty, medium voltage,
XLPE (IS 7098 - PART-II) insulated, Stranded AL / Cu conductor
Armoured / Flexible cables as per specification & IS. The cable shall have outer sheeth of XLPE and inner sheath of PVC with stranded AL conductor wherever specified.
The cable shall be laid underground in excavated trench / prepared trench / hume pipes when laid outside the building. Cable shall be laid throught preapred trench / cable tray / duct / hume pipe / channel / floor trunks etc when laid inside the building as instructed by PMC/Site Incharge.
The scope shall include:
1) Supply of Cables.(With Non Returnable Drums)
2) Delivery of the cables at site.
3) Unloading at site store.
4) Shifting of cable from site store to place of installation.
5) Connection of cable with proper tagging as specified ni specifications.
6) Supply & fixing of cable clamps, brackets, supports, route markers etc. where ever required to fix the cables safely.
7) Earthing the glands and armouring with earthing clamp and jumper and also connecting to common earth bar.
8) Testing of insulation and continuity of cable and submission of reports to the client's representative.
9) To prepare submission drawing and to take approval of consultant at each stage.
10) To prepare & submit as-built drawing and handing over document to end user.
11) Rate shall be inclusive of route markers at 15mtr intervals
12) Each run of cable to be tested with 1KV meggar
13) Proper cables tags of Aluminium shall be made and feeder shall be written.
Approved Makes- FINOLEX / RAVIN / POLYCAB / RR KABEL / GEMSCAB /KEI / HAVELLS
-
-
-
... More
4C x 16 Sq.mm. CU XLPE armored cable
530
-
-
... More
4C x 6 Sq.mm. CU XLPE armored cable
120
-
-
... More
4C x 4 Sq.mm. CU XLPE armored cable
55
-
-
... More
3C x 4 Sq.mm. CU XLPE armored cable
110
-
-
... More
3C x 2.5 Sq.mm. CU XLPE armored cable
80
-
-
... More
CABLE TERMINATION
-
-
-
... More
Supply and Providing heavy duty double compression brass gland and lugs end terminations,IP 66 complete,SIBG type, for the cable specified under above item with Bi-metallic lugs using crimping tool, Insulation tape, Identification tags etc., including end termination and Earthing of Gland.
Approved Makes- DOWELL’S / 3D / HEX JAINSON / COMET / HMI/CCI
-
-
-
... More
4C x 16 Sq.mm. CU XLPE armored cable
4
-
-
... More
4C x 6 Sq.mm. CU XLPE armored cable
2
-
-
... More
4C x 4 Sq.mm. CU XLPE armored cable
4
-
-
... More
3C x 4 Sq.mm. CU XLPE armored cable
8
-
-
... More
3C x 2.5 Sq.mm. CU XLPE armored cable
2
-
-
... More
INTERNAL WORKS
-
-
-
... More
POINT WIRING
-
-
-
... More
Point wiring in PVC conduit, with modular type switch: Wiring for light point/ fan ponit/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, with modular switch, modular plate, suitable Gl box and earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc.as required- Group C
40
-
-
... More
light plug point modular type accessories: Supplying and flxing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and flxing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection, painting etc. as required. (For light plugs to be used in non residential buildings).
4
-
-
... More
power plug point modular type accessories: Supplying and flxing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and flxing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection, painting etc. as required.
4
-
-
... More
Circuit/sub-man wiring in PVC conduit: Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. 2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire
60
-
-
... More
Circuit/sub-man wiring in PVC conduit: Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. 2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire
80
-
-
... More
Circuit/sub-man wiring in PVC conduit: Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire
20
-
-
... More
Supplying and fixing following modular switch/ socket on the
existing modular plate & switch box including connections but
excluding modular plate etc. as required.
5/6 A switch
2
-
-
... More
Supplying and fixing following modular switch/ socket on the
existing modular plate & switch box including connections but
excluding modular plate etc. as required.
3 pin 5/6 A socket outlet
2
-
-
... More
CONDUIT & OTHER
-
-
-
... More
Supply, installation, testing and commissioning of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same
in case of recessed conduit as required.
-
-
-
... More
25 mm
135
-
-
... More
32 mm
50
-
-
... More
SITC of 16A / 20A Single Phase IP66 industrial Plug Point with metal clad plug Socket / plug top with 20A DP MCB including weather proof box cover plate etc, complete in all respect, include switch, box, plate, etc. equivalent to Legrand Make Cat No. 056661
1
-
-
... More
SITC of 25A Three Phase IP66 industrial weather proof Plug Point with metal clad plug Socket / plug top with 32A FP MCB including weather proof box cover plate etc, complete in all respect, include switch, box, plate, etc. equivalent to Legrand Make Cat No. 056674
1
-
-
... More
EARTHING
-
-
-
... More
S/L SWG GI wire in ground:
Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including soldering etc. as required
50
-
-
... More
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I.
pipe from earth electrode including connection with G.I. nut,
bolt, spring, washer excavation and re-filling etc. as required.
225
-
-
... More
Supply, Installation, Testing and Commissioning of UL Listed maintenance free ,Low carbon copper coated earth rod of 3 metre electrode having diameter of 25.0 mm with copper coating thickness of 250micron tested as per IEC 62561-2 + Universal clamp (SS), 25mm + Earth conductivity enhancing mineral compound shall be of 25 kg/pit tested as per IEC 62561-7,TCLP tested OEC 2 25 + The above arrangements shall be provided with Heavy duty earth champer of 5000kg load bearing capacity to ensure the safety of earthing system Under floor earth inspection pit. Cost include to have earth pit cover, testing of all things, etc. in all complete manner. Approved Makes-OBO/ JEFF/ JMV
12
-
-
... More
LIGHT FIXTURES
-
-
-
... More
22W, 2000 Lumen, IP20 4FT Wall/Ceiling mounted LED light fixtures:
Supply, Installation, assembling, connection, testing & commissioning of 22W, 2000 Lumen, IP20 4FT Wall/Ceiling mounted LED light fixtures equivalent to Philips make BN021C LED22S complete with suitable rating lamps and all other necessary accessories to complete the installations as per specifications. Sample should be submitted for approval from concerned engineer-in charge/Architect before finalise the order. CCT 4000K (As per Architect)
Approved Makes-Philips/Wipro/K-Lite
7
-
-
... More
Weather Proof Downlighter : Supply of CEILING LED Fixture -LED 12W,LED Electronic Driver which offers Protection against Short Circuit, Over- Voltage & Over- Current, IP 66 protection,CRI 70,voltage input AC100-240V.Body-Die-casting and Extruded aluminium Body with Surface Anti-ageing electrostatic spray processing & screen. Body colour-RAL 9005 Matt ,Dimension-126mm(Dia.)x138mm(H),Weight-0.75kgs. Estimated Lifetime-L70 @ 50,000hours minimum. Sample should be submitted for approval from concerned engineer-in charge/Architect before finalise the order. Approved Make - NERI/Philips/Lighting Technologies
31
-
-
... More
FIXTURE - 40-45W Power Module LED: Supply, Installation, assembling, connection, testing & commissioning of post top light fixture equivalent to LED FIXTURE - 40-45W Power Module LED, -MOUNTED AT 3.3 METER HEIGHT POST TOP POLE :it's - Upper frame made in die-cast and sheet aluminium (thickness: 2.5mm), with threaded coupling G3/4" for fixing,Bottom frame with ring made in die-cast aluminium and two arms made in hotgalvanized steel, with flange for fixing equipped of a hole (diam. 28 mm) .Gasket between the upper and bottom frames.Painted with polyester powder coating in Metallaic Grey (As per Architectural requirement). IP Rating - IP 66.Height –690mm, Dia - 550mm, Weight - 11.5Kg, Area Exposed to Wind(S) - 0.105 m2. Power LED's Module (with CREE/NICHIA/OSRAM/SEOUL SMD type LED’s with ESD=8kV & Ceramic package are accepted. LED manufacturers tech sheet with buying documents should be submitted for verification. Individual LED's Minimum Luminous Flux (lm) is 139lm @ 350 mA (@ 85 °C) same should be supported by LED manufacturer's tech sheet) in compliance with IEC 62031(supporting type test report should be submitted), on Printed Circuit Board with metal core plate. Colour Rendering Index: Ra 70. Electronic Power Supply for LED Module, which offers Protection against Short Circuit, Over- Voltage & Over- Current, with in-built surge protection upto 1.5kv(an additional surge protection device of 10kV also provided in-built the fixture). Optics with refractive lens (Polycarbonate), UV Resistant & Shock Resistance IK10.LM80 Reported LED Lifetime is L90@ 50,000hours minimum.(same should be supported by LM 80 report from NVLAP accredited lab) & Estimated LED Lifetime is L80 @ 100,000 hours(Ta-25°C) minimum..LM 80 report & TM 21 calculation should be submitted to support the same.The Light fixture shall be in compliance with IEC 60598-2-3; IEC 60598-1.(Supporting Test Report from NABL accredited Laboratory should be submitted) .LM79 report should be submitted from NABL accredited Laboratory. Sample should be submitted for approval from concerned engineer-in charge/Architect before finalise the order. Approved Make - Philips /Neri
2
-
-
... More
Supply, Installation, assembling, connection, testing & commissioning of ARCHITECTURAL POLE (FOR POST TOP LIGHT) 3.3M height Pole (Total height of the pole is 4m including post top) Made in combination of hot dip galvanised mild steel pipe sections 114mm dia. & 140mm dia. Arch. cast iron Base design starts with min 322mm Dia. ring, radially tapers to 140 mm for a height of min 235 mm matching to the drawing. Total weight of the base is min 15 Kgs. Decorative Ring-1 (140/114mm dia. – min 3kgs.) & Top Ring (weight- 3kgs.) are made of cast iron. Entire pole shall be made to provide pleasing aesthetics as approved by Concerned Engineer in-charge. After Fabrication, Entire Pole is hot dip galvanized(60 microns Minimum ) for the effective corrosion resistance . The hot dip Galvanised pole should be provided with an inbuilt junction box (Concealed) to fix 32A connectors and 6A MCB (to terminate incoming and outgoing armoured cables with glands and lulgs), at the bottom -the inbuilt box should have a flush door of suitable size. The decorative pedastal to be mounted on a suitable size steel plate. This mounting steel plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed RCC foundation. wind pressure calculation as per IS 875(part-3) & structural calculation report as per EN40 should be submitted to verify the pole design. Pole & it's parts are painted in 3 layer coating(coating thickness-100 microns minimum) in which 1st layer with etch primer, 2nd layer with epoxy primer & 3rd final layer with PU paint- customised colour Metallaic Grey (As per Architectural requirement). Adequate size cutout with opeanable hinged door should be provided on pole with necessary gasket to ensure water tight arrangement for pulling cables and installation of mcb, connectors etc, complete in all respect as per requirement and instruction of engineer in charge. Scope also includes necessary foundation, cable termination, earthing as per requirement, cable entry pipes, 3 core round flexible wire from junction box to light fixture etc. all require to complete job. Approved Make - Philips / Neri
2
-
-
... More
Wall Recessed LED Step Light : (FOOT LIGHT)
Supply,Installation, Testing and Commmisioning of IP68, IK10 protected Step Light Fixture. Fixture made of powder coated die cast alluminium with Toughened Glass cover and appropriate beam angle lens to be used as per requirement. The System level Luminous efficacy must be 90 Lumen/W. High Power LEDs at 1W/2W per LED. The driving current should be Minimum 350 mA per LED. CRI70, CCT: 3000/6500 K. The integral electronic driver must be constant current and surge protection of min. 4KV(L-N) and efficiency 85%, PF0.95 and input Voltage range of 90-270V AC at 50Hz. System life of 50000 Burning hours with 70% of Initial Lumens maintained. Light should include quick connecting cable coupled with various mounting accessories. Light output in Cool white or Warm White Colour as per engineers/Architect choice. Fixture must be in compliance with BIS. Sample should be submitted for approval from concerned engineer-in charge/Architect before finalise the order.
Approved Make - NERI/Philips/Lighting Technologies
12
-
-
... More
Floor Recessed : (STEP LIGHT)
Supply, Installation, assembling, connection, testing & commissioning of LED FIXTURE - equivalent to NGB-M1A,1W,LED,3000k, IP 67
Light NGB-M1A: The housing in light weight, made of high strength die cast aluminium and coated by static powder making it weather resistant.Top AL diecast cap for two way light output . Premium thermal management by high heat conductivity aluminum alloy and thermal fins. Precise structure and multi-protection silicon rubber seal guarantees the fixture IP67 rated. Height – 87mm, Dia.-110mm, Weight - 0.25Kgs. Power LED Module with high efficacy LED's, on Printed Circuit Board with metal core plate. CRI 80,P.F0.9,voltage input AC100-277V,50/60Hz. In- Built Electronic Power Supply for LED Module,which offers Protection against Short Circuit, Over- Voltage & Over- Current, with in-built surge protection. Estimated LED Lifetime is 70,000 hours minimum. Sample should be submitted for approval from concerned engineer-in charge/Architect before finalise the order. Approved Make - NERI/Philips/Lighting Technologies
16
-
-
... More
Supply, laying, connection and testing of LED bulk head lighting with all necessary details.
2
-
-
... More
Landscape Bollard
Supply, laying, connection and testing of Landscape Bollards 15Watts Bollard LED, IP66, 800/100mm. Sample should be submitted for approval from concerned engineer-in charge/Architect before finalise the order.
Approved Make - NERI/Philips/Lighting Technologies
15
-
-
... More
Supply, Installation, assembling, connection, testing & commissioning of Wall Mount/ Wall washer Lights. LED FIXTURE - equivalent to NERI/NWL- 17S/13
Sample should be submitted for approval from concerned engineer-in charge/Architect before finalise the order.
Approved Make - NERI/Philips/Lighting Technologies
4
-
-
... More
JUNCTION BOXES
-
-
-
... More
Supply, Transportation, Installation, testing and commissioning of IP 67 weather proof Outdoor type junction boxes with terminal block/connector. Equivalent to Hensel catalogue no KF 1006 G/OBO/CAPE
1
-
-
... More
Supply, Transportation, Installation, testing and commissioning of IP 67 weather proof Outdoor type junction boxes with terminal block/connector. Equivalent to Hensel catalogue no KF 1610 G/OBO/CAPE
1
-
-
... More
Supply, Transportation, Installation, testing and commissioning of IP 67 weather proof Outdoor type junction boxes with terminal block/connector. Equivalent to Hensel catalogue no KF 1616 G/OBO/CAPE
2
-
-
... More
DWC PIPES
-
-
-
... More
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. , complete as required.
-
-
-
... More
63 mm dia (OD-63 mm & ID-51 mm nominal)
48
-
-
... More
Providing & Laying of HDPE Pipe 32mm PE-80,PN6 direct in ground; to be laid 75-100cm below the ground level for drawing of cables including excavation and refilling the trench etc.as required, but excluding sand cushioning and protective covering,or G.I. conduit 32 mm dia( Heavy Duty) with concrete block 15cm X 15cm 1:2:4 with complete curing with splicing complete in all respect complete in all respect. Make: Jain/Dutron/Supreme/reliance
225
-
-
... More
CABLE TRAY
-
-
-
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron
cable tray cable tray with perforation not more than 17.5%, in convenient sections,
joined with connectors, suspended from the ceiling with G.I. suspenders including
G.I. bolts & nuts, etc as required.
-
-
-
... More
150 mm width X 50 mm depth X 1.6 mm thickness
20
-
-
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron
cable tray “bends “ ( galvanisation not less than 50 microns) with perforation not
more than 17.5%, in convenient sections, joined with connectors, suspended from
the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.
-
-
-
... More
150 mm width X 50 mm depth X 1.6 mm thickness
6
-
-
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron
cable tray “Tee” ( galvanisation not less than 50 microns) with perforation not more
than 17.5%, in convenient sections, joined with connectors, suspended from the
ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.
-
-
-
... More
150 mm width X 50 mm depth X 1.6 mm thickness
2
-
-
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron
cable tray “Cross member” ( galvanisation not less than 50 microns) with perforationnot more than 17.5%, in convenient sections, joined with connectors, suspendedfrom the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.
-
-
-
... More
150 mm width X 50 mm depth X 1.6 mm thickness
2
-
-
... More
FIRE STOPPER & SAFETY ITEMS
-
-
-
... More
Supply and installtion of expanding firestop foam equivalent to Hilti CP 620 on both sides of wall, with minimum 2 hours fire rating when tested in accordance with UL 1479/ASTM-E 814, for horizontal openings in floors or slabs made of concrete/ masonry or Gypsum after passing service lines like cable trays or cables/cable bundles. The expanding foam expands seven times its volume to fill the cavity at the time of dispensing the material and shall fully cure within two minutes after dispensing. The product shall be age tested as per Dafstb and DIBT standards. The product shall provide water tightness when tested for W rating as per UL standards and shall carry test certificate for sound insualtion of 50 db when tested in accordance with ASTM E 90. The product shall carry test certificate for mold resistance rating of 0 as determined by ASTM G21-96 and shall have a VOC content of approx. 1.3 g/l as per LEED 2009. The product shall be tested in accordance with IEC 60068-2-57:1999-11 (Environmental Testing) as per Part 2-57: Test for Vibration-Time-history method and VERTEQII for seismic zone 4. The system shall be UL listed & classified. The system shall be UL & FM approved.
2
-
-
... More
Supply and installatio of Acrylic Firestop Sealant equivalent to Hilti CP 606 in gaps between wall and slab made of concrete/masonary/gypsum on both sides of wall to provide minimum 2 hours fire rating when subject to the test conditions of UL 2079 standards. The product shall be age tested as per DafStb guidelines. The product shall be age tested as per Dafstb and DIBT standards.Sealant should provide sufficient MAF, water and gas tight seal. Sealant shall also provide airborne sound transmission reduction (STC of 50) and shall be tested as per DIN 52210 for sound insulation. Sealant shall carry test certificate for mold resistance rating of 0 as determined by ASTM G21-96 and should have a VOC content of approx. 75 g/l as per LEED 2009. The sealant shall carry test certificate in accordance with IEC 60068-2-57:1999-11 (Environmental Testing) as per Part 2-57: Test for Vibration-Time-history method and VERTEQII for seismic zone 4.
2
-
-
... More
UPS
-
-
-
... More
Supply installation Testing and commissioning of 1 KVA (SINGLE PHASE) on line UPS system confirms to IS 16242(Part-I):2014 and IEC 60240-1 : 2008 with IGBT technology pure sine wave out put, double conversion with auto and manual static by pass switch single phase input / Single phase output with minimum 15 minutes battery back up of each UPS.
Approved Makes-Eaton, Neumeric, APC
1
-
-
... More
PUBLIC ADDRESS
-
-
-
... More
Design, Supply, Install, Testing of all Public Address Components and Commissioning of a Complete Public Address/Evacuation System complete with all items mentioned but not limited to below: -
-
-
-
... More
In general the complete system design and installations shall confirm to latest IEC Standards and the specifications, drawings submitted here with.
-
-
-
... More
Supply, Installation, Testing and Laying of 2 Core X 1.5 Sq.mm FRLS PVC insulated Shielded Copper armoured cable with all required accessories. Approved Makes- KRYSTAL/Polycab/RRcable/KEC
10
-
-
... More
Supply, Installation, Testing and Laying of 2 Core X 1.5 Sq.mm FRLS PVC insulated Shielded Copper unarmoured cable with all required accessories. Approved Makes- KRYSTAL/Polycab/RRcable/KEC
90
-
-
... More
Supply, Installation, Testing and Laying of Speaker Cable 4sqmm armoured 2 core with all necessary accessories to comply the installation.
Approved Makes- KRYSTAL/Polycab/RRcable/KEC
450
-
-
... More
Supply, installation, testing and commissioning of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
25 mm
90
-
-
... More
Ceiling mounted Weatherproof Speaker: Supply, Installation, Testing and Commissioning of 7.5W tapping Ceiling Speaker Approved Makes- BOSE / JBL / Honeywell / Bosch
4
-
-
... More
Supply, Installation, Testing and Commissioning of CD Player with in built FM,USB,SD Card Supported.
Approved Makes- Honeywell / BOSE / Bosch
1
-
-
... More
Supply,installation, testing & Comissioning of Class D configurable amplifier with total 600W output power or better configurable across 2 outputs, 4/8ohms, 70/100 Volt or mixed use operation; Frequency Response : 20Hz - 20kHz for LZ mode ; S/N Ratio 99db and THD 0.04% at rated output complete with standard accessories as required. Support four audio input channels from a Dante network and mix onboard analog inputs with digital Dante inputs. Built in DSP for Matrix routing, Speaker EQs, delays etc. Phoenix Input and output terminals, shall support remote Volume controllers (wired) for individual channels.
Approved Makes- BOSCH / BOSE / ATIES / HONEYWELL / JBL
1
-
-
... More
Supply, Installation, Testing and Commissioning of Wall mounted 9U Rack along with power sockets strips and all other require components & acceessories to mount all the equipments for satisfactory job.
Approved Makes- Rittal/Panduit/Valrack
1
-
-
... More
Any other Item Not included above but required to complete the Job:-
1
-
-
... More
[ Bidder shall list each item here under and a detailed Rate Analysis to be submitted along with commercial bid.]
-
-
-
... More
CCTV SYSTEM
-
-
-
... More
Design, Supply, Install, Testing,Commissionnig of CCTV System complete with all items mentioned but not limited to below: -
-
-
-
... More
In general the complete system design and installations shall confirm to latest IEC guidelines and the specifications, drawings submitted here with.
-
-
-
... More
Supply, installation, testing and commissioning of Cat6 cable. Make:- SYSTEMAX / CALIPLAST / DURANET / PANDUIT
110
-
-
... More
Supply, Installation,testing and commissioning of 8Port POE Network Switch to provide Power and Data Communication for mentioned Camera. With 1 G SFP Module.
Approved Makes- CISCO / HP / SIEMENS / R&M / NetGear
1
-
-
... More
Supply, installation, testing and commissioning of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
25 mm
110
-
-
... More
Supply, Installation, Testing & Commissiong of IP MFZ BULLET CAMERA
Supply, Installation, Testing & Commissioning of IP Network TDN Low-Light IR Bullet Camera, 1/2.8" CMOS, 2 MP @ 25fps, Min. Illumination required 0.01 lux @ F1.4 (color), 120dB True WDR, Min. Pixels 1920 X 1080, triple stream, 2.7 -12 mm motorized focus and zoom lens, BLC, HLC, 3DNR, Privacy Mask, IR LEDs Smart IR with upto 50m IR distance, Dual channel Audio G.711a/G.711u/AAC, 128GB SD card support, Alarm: 2 In/ 1out, PoE, H.264 High Profile and MJPEG, Inbuilt analytics Trigger line/Intrusion/Loitering, PoE Class 3 and 12V DC, IP 67, IK 10 vandal proof, Having Operating temp range : –40°C to 60° C. Certifications: ONVIF Profile S & Profile G compliant, UL, CSA 60950-22, CE (EN 50130-4 & EN 55022) , FCC Part 15 & RoHS compliant. Cyber Security PCI-DSS or equivalent Certified.
Approved Makes- Honeywell/BOSCH/Hikvision/Pelco/Axis
2
-
-
... More
Supply, Installation, assembling, connection, testing & commissioning of 5.0 MP 33X IP PTZ Dome camera ,1/.8" Super Starlight CMOS,2880×1620@30fps, 200m IR ,30x optical zoom, Autotracking & Early warning Speed 0.1°~180°/s, Low Iux 0.0002Lux, TVS 6000V protection; Audio I/O 1/1, Alarm I/O 8/2, RS-485, BNC, Wiper, White light, Green Laser, Built-in speaker ,Face capture mode, Human/vehicle classification MicroSD card(512GB), Onvif Profile S/T/G/M, IP66,,PoE++ Equivalent to Honeywell/BOSCH/Hikvision/Pelco/Axis
3
-
-
... More
Supply, Installation, Testing & Commissioning of 8-channel network video recorder (NVR), Real-time recording: Up to 16 channels 1080P @ 4Mbps, Operating System LINUX, H.265, H.264 high quality decoding, RAID-0/1/5/6/10 support, motion detection, 3 USB 2.0 ports, USB storage device, 2 RJ-45 port, 1 RS-232, Hot swap, 2 bay HDDs, Support ONVIF Profile S, HTTP/HTTPS, TCP/IP, RTSP, UDP, NTP, HTTPS, DHCP, IP Search protocols can support Approved Makes- Bosch/Honeywell/Axis/Pelco
1
-
-
... More
Supply, Installation, Testing and Commissioning of Wall mounted 9U Rack along with power sockets strips and all other require components & acceessories to mount all the equipments for satisfactory job.
Approved Makes- Rittal/Panduit/Valrack
1
-
-
... More
Supply, Installation, Testing and Commissioning of Junction Box(570X280X215) and all other require components & acceessories to mount all the equipments for satisfactory job.
Approved Makes- 3C3/Hensel
1
-
-
... More
Supply, Installation, Testing and Commissioning of 6 single mode fiber optic cables (9/125 µm) with all necessary accessories to comply the installation.
Approved Makes- SYSTEMAX / CALIPLAST / DURANET / PANDUIT /R&M
570
-
-
... More
Supply, Installation, Testing and Commissioning of 06 LC Port Loaded LIU SM DinRail Type with all necessary accessories to comply the installation.
Approved Makes- Honeywell / Panduit / R & M
1
-
-
... More
Supply, Installation, Testing and Commissioning of LC-LC SM Patch Cord 3 Mtr with all necessary accessories to comply the installation.
Approved Makes- Honeywell / Panduit / R & M
1
-
-
... More
Supply, Installation, Testing and Commissioning of SC-LC SM Patch Cord 3 Mtr with all necessary accessories to comply the installation.
Approved Makes- Honeywell / Panduit / R & M
1
-
-
... More
Supply, Installation, Testing and Commissioning of I/O User end and all necessary accessories to comply the installation.
5
-
-
... More
Supply, Installation, Testing and Commissioning of Wheather Proof Back Box for CCTV(120X120X75) with all necessary accessories to comply the installation.
1
-
-
... More
Hard Drive Disk: SITC of Enterprise surveilliance HDD 8 TB for 60 days storage at D1 resolultion. Approved Makes- Bosch/Honeywell/Axis/Pelco
2
-
-
... More
Supply, Installation, Testing and Commissioning of industrial type 32" LED Display for 24x7 runningg (ON), 1920 X 1080 Resolution, 450 CD/M2 Brightness, Wall Mounting Bracket. Approved Makes- SAMSUNG / SONY / LG
1
-
-
... More
Supply, Installation, Testing and Commissioning of 1 mtr. Cat 6 Patch cord. Approved Makes- Honeywell / Simplex / Siemens / Panduit
10
-
-
... More
Supply, Installation, Testing and Commissioning of 8 Port fully loaded patch panel
Approved Makes- Honeywell / Simplex / Siemens / Panduit
1
-
-
... More
Provision for connector ,cords,cable tie etc.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements