Pradhan Mantri Gram Sadak Yojana Tender

Coolie Walling for Edge /filling protection including supply of all material labour T&P. etc.as per drawing required for proper comletion of word as white washing complete as per the derection of Engineer - in - charge.

Excavation for Structures:- Earth work in Excavation foundation for cross drainage structures, retaining walls, breast walls & other similar structures in all types of soils and rocks as met at site with all leads, lifts and disposal of surplus earth as directed by engineer in charge including supply of all material labour, T&P etc. required for proper completion of work in accordance with the MoRD as per Technical Specification Clause 305.1&300

Random rubble stone masonry for structures laid in 1:5 cement & sand mortar by locally available approved stone and sand from approved quarry including supply of all materials, labour, T&P etc required for proper completion of work as per Drawing and MORD specification for cross drainage structures, retaining walls, brest walls & other smimilar structures etc as per direction of Engineer-in-charge..

Random rubble stone masonry for structures laid dry by locally available approved stone ncluding supply of all materials, labour, T&P etc required for proper completion of work as per Drawing and MORD specification for , retaining walls, brest walls & other smimilar structures etc as per direction of Engineer-in-charge..

HP stone filling in back of structures including supply of all material, labour, T&P, royalty etc. required for proper completion as directed by Engineer-in-charge and MORD Specification for Rural Roads 2014. (For R/Wall, B Wall )

Providing and laying of boulder apron laid in wire crates with 4 mm dia GI wire conforming to IS:280 and IS:4826 in 100 mm x 100 mm mesh (woven diagonally)including 10 per cent extra for laps and joints laid with stone boulders weighing not less than 25 kg each (crate size 3.00m * 1.50m* 1.25m) as directed by Engineer-in-charge and MORD Specification for Rural Roads 2014.

Construction of Road Side Parapat Including supply of all material labour, T & P etc. required for proper completion of the work as directed by Engineer in charge and MORD specification for Rural Road 2014

R.R. stone masonary in cement mortar 1:5

C.C in M 20 At Top Surface

Plaster in 1:4 Back side and Both Sides

Flushing pointing in 1:3 in front Side

White washing Two Coats

Construction of Hill side Kutcha Trapezoidal drain as per drawing (Top 0.60m, Bottom 0.30m & Height 0.40 to 0.60m as per site) in accordance with the requirement as directed by Engineer-in-charge and MORD Specification for Rural Roads 2014

Excavation in foundation for structures in all types of soils and rocks including all lead, lift and disposal of surplus material as directed by Engineer-in-charge and MORD Specification for Rural Roads 2014. (X-Drainage/ Drainage Structure, )

Construction of R.R. stone masonary in cement mortar 1:5 including supply of all materials,labour, T&P,Royalty etc required for proper completion of work as directed by Engineer-in-charge and MORD Specification for Rural Roads 2014. ( X-Drainage/ Drainage Structure)

Construction of R.R. stone masonary laid dry including bond stones, supply of all materials, labour,T&P & Royalty etc.required for proper completion of work as directed by Engineer-in-charge MORD Specification for Rural Roads 2014. ( X-Drainage/Drainage structure)

HP stone filling in back of structures including supply of all material, labour, T&P, royalty etc. required for proper completion as directed by Engineer-in-charge and MORD Specification for Rural Roads 2014. X-Drainage/Drainage structure) Scupper

Providing weep holes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia PVC pipe extending through the full width of the structures with slope of 1(V):20(H) towards face complete as directed by Engineer-in-charge and MORD Specification for Rural Roads 2014.

Providing and laying of concrete for plain concrete in open foundations for structures including supply of all materials, labour, T&P, royalty etc. required for proper completion of work as directed by Engineer-in-charge and MORD Specification for Rural Roads 2014. P.C.C grade M 10. ( For X-Drainage/Drainage straucture)

Plain cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 PCC grade M 25 (Sub Sturcture)

Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 RCC grade M 25 (Sub Sturcture)

Supplying, cutting , and placing of HYSD bar reinforcement in substructure/superstructure complete (IS1786:2008 clause no. 1.6) Steel shall not be from rerolling plants and shall conform to relevent IS Code including supply of all materials, labour,T&P, royalty etc. required for proper completion of work as directed by Engineer-in-charge as per MORD Specification for Rural Roads 2014 (Sub Structure)

Reinforced cement concrete M15 grade 5th kilometer stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing , directed by Engineer-in-charge and MORD Specification for Rural Roads 2014. (precast).( km stone)

Reinforced cement concrete M15 grade kilometer stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing , directed by Engineer-in-charge and MORD Specification for Rural Roads 2014. (precast).( km stone)

Providing and fixing of Hectometer stone as per standard drawing made of precast R.C.C. M15 grade fixed with P.C.C. M10 grade, including excavation of pit, painting and printing letters on kilometer stone with two coat of synthetic enamel paint of approved quality as directed by Engineer in charge.

Providing & fixing of PMGSY Logo Board at starting point, end point and at every 1 Km distance of road length as per standard drawing duly painted and written and as directed by Engineer in charge/ as per MORD Specification for Rural Roads 2014.

Providing fixing of Title Information Board with PMGSY Logo at suitable place in the starting of the road as per standard drawing duly painted and written as directed by Engineer in charge/ as per MORD Specification for Rural Roads 2014.

Providing & fixing of Citizen Information Board with PMGSY Logo at starting or prominent location (where maximum no. of citizens can view the detail of the road) as per standard drawing dully painted and written as directed by Engineer in charge/ as per MORD Specification for Rural Roads 2014.

Providing & fixing of Maintenance Information Board with PMGSY Logo at starting or prominent location (where maximum no. of citizens can view the detail of the road) as per standard drawing dully painted and written as directed by Engineer in charge/ as per MORD Specification for Rural Roads 2014.

Semi reflective Traffic Sign Boards Direction and place identification sing more than 0.90 Sqm sing board providing and erecting direction and place dentification of semi reflective sing boards as per IRC-67 made of 2 mm thick M.S sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70 mm width and required message, letters, figures with reflective tape of engineering grade as per MORD specifications of required shade and colour Supportes and welded on two nos 47 mm x 47 mm of 12 SWG square tube of 3050 mm height duly strengthened by 25 mmx 5 mm MS flat iron on edges on back firmiy fixed to the ground by means of properiy designed foundation with M-15 grade cement concrete 450 mm x 450 mm x 600 mm 600 mm below ground level as per approved drawing and technical specification Clause 1701.

Direction and place indentification sign board up to 0.9 sqm size board Rrtro-reflectorised Traffic Sign Providing and erecting direction and place identifications retroreflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium 2 mm thick with area not exceeding 0.9 Sqm supported on a mild steel single angle iron post 75x75x6 mm fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and as directed by Engineer in charge/ as per Clause 1701 . .

Surveying & Preparation of Detailed Project Report (DPR) including trace cut.

Construction of reference/level pillers size 20x20x30 cm with R.R.stone masonry laid in mud mortar and plastering with cement sand morter (1:6) complete in all respect as per standard drawing and MORD specifications , for rural roads 2014.

Construction of Back cutting piller size 30x30x40 cm with R.R.stone masonry laid in mud mortar and plastering with cement sand morter (1:6) complete in all respect as per standard drawing and MORD specifications , for rural roads 2014.

Construction of Job pillers 40x40x60 cm with R.R.stone masonry laid in mud mortar and plastering with cement sand morter (1:6) complete in all respect as per standard drawing and MORD specifications , for rural roads 2014

Maintainance Activities:

Slip clearance of earth and boulders and other small loose materials after hill side cutting in rainy season including disposal of material as directed by Engineer-in-charge and as per Clause 1611 MORD specifications for Rural Roads 2014 .

1St year

2nd year

Maintenance of Drains The maintenance of drains include erosion, repair, clearing, cleaning, reshaping includingi clearing miner slips (0.30m3/ rm) regrading specification Clause 1908 of MORD Specification for Rural Roads 2014 . ( twice in a year)

1St year

2nd year

Maintenance of Slab type Culverts/ Scupper/ Hume Pipe by way of learing, Cleaning, Erosionrepair, repairs to cracks, parapet walls and Protection works as per drawing and technical specification Clasue 1909 of MORD Specification for Rural Roads 2014 ( twice in a year)

1St year

2nd year

Maintenance of Carriage way including shoulders by filling ruts, dressing of surface, repair of edges, raincuts etc. as per MORD Specification for Rural Roads 2014

1St year

2nd year

Maintenance and Cutting of branches of trees shrubs and trimming of grass and bushs weeds as per Clause 1914 & 1915 of MORD Specification for Rural Roads 2014 ( twice in a year)

1St year

2nd year

White washing of parapet walls of CD work and tree truncks including preparation of surface by cleaning scrapping etc. as per MORD Specification for Rural Roads 2014 twice year

White washing parapets.

1St year

2nd year

Routine Maintenance- Under PBMC

Maintenance under PBMC for 1] Trimming of grass and weeds from the shoulders/berms and disposing off the same to suitable locations as per technical specifications Clause 1914. 2] Maintenance of road side Drains including minor slip clearence , reshaping ,deepening and ,regrading ,as well as catch water drains as per technical specification Clause 1907. 3]Maintenance of shoulders to the required level by filling/cutting the soil and its compacting including disposal of the surplus material in approved muck disposal points as per specification clause 1903 . 4] Maintenance of scuppers & Culverts by way of clearing, Cleaning, Erosion repair, repairs to cracks, parapet walls and Protection works as per drawing and technical specification Clasue 1908. 5] Maintenance of Causeway by way of minor Surface repairs, replacing Guide Posts, repair of flood gauges, removal of debris, providing boulders and protection work and painting as per technical specification Clause 1909. 6] Maintenance of road signs by way of cleaning and repainting of mandatory / requlatory / cautionary / informatory and place identifications sign board as per drawings and technical specification Clause 1910. 7] Maintenance of 200 metre km stone by way of refiting of tilted stones repairing with cement mortar, cleaning, repairing and lettering on 200 metre km stone and 5th km stone as per drawing and technical specification Clause 1912. 8] Two coat white washing on parapet walls of CD work ,edge stones, tree truncks, and prominent rock patches on hill sides including preparation of surface by cleaning scraping etc. as per technical specifications Clause 191.

Ist Year

Iind Year