Pradhan Mantri Gram Sadak Yojana Tender

Excavation in foundation for structures in all types of soils and rocks including all lead, lift and disposal of surplus material as directed by Engineer-in-charge and MORD Specification for Rural Roads 2014.

Construction of R.R. stone masonary in cement mortar 1:5 including supply of all materials,labour, T&P,Royalty etc required for proper completion of work as directed by Engineer-in-charge and MORD Specification for Rural Roads 2014.

Construction of R.R. stone masonary laid dry , supply of all materials, labour,T&P & Royalty etc.required for proper completion of work as directed by Engineer-in-charge MORD Specification for Rural Roads 2014.

HP stone filling in back of structures including supply of all material, labour, T&P, royalty etc. required for proper completion as directed by Engineer-in-charge and MORD Specification for Rural Roads 2014.

Providing and laying of boulder apron laid in wire crates with 4 mm dia GI wire conforming to IS:280 and IS:4826 in 100 mm x 100 mm mesh (woven diagonally) including 10 per cent extra for laps and joints laid with stone boulders weighing not less than 25 kg each as per drawing and technical specifications Clause 1301

Providing weep holes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia PVC pipe extending through the full width of the structures with slope of 1(V):20(H) towards face complete as directed by Engineer-in-charge and MORD Specification for Rural Roads 2014.

Cement plum masonry with 40% plum & 60% 1:3:7 cement concrete including supply of all material, labour, T&P, Roylty etc. required for proper completion of the work as per direction of Engineer in Charge. (As per PWD Uttarakhand specifications)

White washing two coats on parapet walls and tree trunks including preparation of surface by cleaning scraping etc. as per technical specifications Clause 1916 of MORD Specification for Rural Roads 2014

Providing edge stones on valley side of formation as per drawing and Technical Specification Clause 1608.2.6

Coolie walling including supply of all material, labour, T&P , royalty etc. required for proper completion of the work , as directed by Engineer-in-charge and as per PWD specifications 8.90

Construction of Hill side Kutcha Trapezoidal drain as per drawing (Top 0.60m, Bottom 0.30m & Height 0.40 to 0.60 m) in accordance with the requirement as directed by Engineer-in-charge and MORD Specification for Rural Roads 2014

Construction of hill side Pucca drains as per drawing including supply of all material, labour, T&P etc. required for proper completion of the work as directed by Engineer-in-charge and MORD Specification for Rural Roads 2014.

Excavation

R.R 1:5 in Cement mortar

Plaster work in 1:4 Cement mortar

Construction of 1.00M span R.C.C slab scupper including catchpit with R.R. stone mesonry laid in 1:5 cement-sand, mortar & RCC M25 grade slab, including supply of all materials, labour , T&P etc. required for proper completion of work as per drawing & directed by Engineer-in-charge.

Earth work in excavation.

R.R 1:5 in Cement mortar

P.C.C M10 Nominal mix 1:3:6 (Hand mixing)

R.C.C grade M25

Supply,fitting and placing HYSD reinforcement bar.

HP stone filling .

40mm thick PCC M20 in bed of scupper as wearing coat.

Construction of causeway as per drawing approved by C.E.Level -1 P.W.D. Uttrakhand with R.R. dry kharnja, plain cement concerte 1:3:6, C.C. 1:1.5:3 including supply and fixing of HYSD steel reinforcement and requried excavation etc. completed all respect as per P.W.D. specification

R.R 1:5 in Cement mortar

P.C.C M10 Nominal mix 1:3:6 (Hand mixing)

R.C.C grade M25

Supply,fitting and placing HYSD reinforcement bar.

Gravel/Soil-Aggregate Base (Table 400.2) Grading A . Construction of gravel/soil-aggregate base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with three wheel 80-100 kN static roller to achieve the desired density, complete as per Technical Specifications Clause 402]

Gravel/Soil- Aggregate Base (Table 400.2) Grading B Construction of granular sub-base by providing well graded material, spreadingin uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with three wheel 80-100 kN static roller capacity to achieve the desired density, complete as per Technical Specification Clause 402

Providing,laying , sperading and compactiong stone aggregates of specific sizes to water bound macadam Grading - III specification ( 53mm to 22.4mm @ 0.91cum per 10 sqm for compacted thickness of 75mm ) including spreading in uniform thickness, hand packing, rolling with a three wheel 80-100 KN static roller in stages to proper grade and camber, applying and brooming, stone screening materials ( 11.2 mm stone grit for Grading - III @ 0.18 cum per 10 sqm ) to fill-up the interstices of coarse aggregate, watering and compacting to the required density as per MORD Specification

Providing and applying primer coat with bitumen emulsion ( SS-I) on prepared surface of water bond macadam base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 Kg/Sqm using machanical means as per MORD Specification.

Providing and applying Tack coat with bitumenous emulsion ( RS-I) using emulsion distributor @ 0.25 to 0.30 Kg per Sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per MORD Specification.

Providing, Laying and rolling of open - graded premix carpet of 20mm thickness composed of 13.2 mm to 5.6 mm aggregates using using Bitumen Emulsion (MS) to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 KN static roller capecity, finished to riquired level and grades to be followed by seal coat of either Type A or Type B or Type C as per per MORD Specification.

Provinding and laying seal coat for sealing the voids in a bituminous surface laid to the specification levels, grade and cross fall using Type "A" ( with Crushed stone chipping, 6.7 mm size 100% passing 11.2 mm sieves and retained on 2.36 mm sieve applied @ 0.09 cum per 10 Sqm ) as per MORD Specification.

Providing and fixing of Hectometer stone as per standard drawing made of precast RCC M15 grade fixed with PCC M10 grade, including excavation of pit, painting and printing letters on hectometer stone with two coat of synthetic enamel paint of approved quality as directed by Engineer-in-charge.

Providing & fixing of PMGSY Logo Board at starting point of road as per standard drawing duly painted and written and as directed by Engineer in charge/ as per MORD Specification for Rural Roads 2014.

Providing & fixing of PMGSY Logo Board at end point and at every 2 Km distance of road length as per standard drawing duly painted and written and as directed by Engineer in charge/ as per MORD Specification for Rural Roads 2014.

Providing fixing of Title Information Board with PMGSY Logo at suitable place in the starting of the road as per standard drawing duly painted and written as directed by Engineer in charge/ as per MORD Specification for Rural Roads 2014.

Providing & fixing of Citizen Information Board with PMGSY Logo at starting or prominent location (where maximum no. of citizens can view the detail of the road) as per standard drawing dully painted and written as directed by Engineer in charge/ as per MORD Specification for Rural Roads 2014.

Providing & fixing of Maintenance Information Board with PMGSY Logo at starting or prominent location (where maximum no. of citizens can view the detail of the road) as per standard drawing dully painted and written as directed by Engineer in charge/ as per IRC/ MORD Specification for Rural Roads 2014.

Providing & fixing of Semi reflective Trafic Sign Boards as per standard drawing duly painted and written as per direction of engineer-in-charge in the starting and end of the road.

Direction and place indentification sign board up to 0.9 sqm size board. Providing and erecting direction and place identifications of semi reflective sign boards as per IRC:67 made of 2 mm thick M.S. Sheet duly stove enameled paint in white colour in front and grey colour on back with red reflective border of 70 mm width and required message, letters, figures with reflective engineering grade tape as per MORD specifications of required shade and colour. Supported and welded on 47 mm x 47mm of 12 SWG Square tube of 3050 mm height duly strengthened by 25 mm x 5 mm M/s flat iron on edges on back firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and as directed by Engineer in charge/ as per Clause 1701of MORD Specification for Rural Roads 2014. .

Bio Engineering:-Turfing with Sods Furnishing and laying of the live sods of perennial turf forming grass on embankment slope / Hill side cutting slope /dumping Yard as directed by Engineer-in-charge and as per clause 309 and 1610.2 of MORD Specification for Rural Roads 2014.

survey work for preparation of stge-II DPR, pavement design etc complete in all respect.

Emergency Maintenance

Major Slip Clearance in all Type of Soil ,rock and boulders including cost of all material , machine,T&p etc required for proper compeletion of work as per mord specification of work 1611 Ist Year

Iind Year

IIIrd Year

Ivth Year

Vth Year

Deploying Hydraulic excavator of 0.90cum bucket for clearence of Major slip in all type of soil rock and boulders including its operator ,pol, and all other charges required for proper compeletion of work Ist Year

Iind Year

IIIrd Year

Ivth Year

Vth Year

Providing and laying of boulder apron laid in wire crate with 4 mm dia GI wire conforming to IS:280 and IS:4826 in 100 mm x 100 mm mesh (woven diagonally) including 10 per cent extra for laps and joints laid with stone boulders weighing not less than 25 kg each as per drawing and techniacal specification 1301 Ist Year

Iind Year

IIIrd Year

Ivth Year

Vth Year

Coolie Walling including supply of all material, labour, T&P,royalty etc. required for proper completion of the work,as directed by Engineer-in-charge and as per PWD specifications 8.90 (For opening communication only) Ist Year

Iind Year

IIIrd Year

Ivth Year

Vth Year

Maintainance Activities:

Maintenance under PBMC for 1] Trimming of grass and weeds from the shoulders/berms and disposing off the same to suitable locations as per technical specifications Clause 1914. 2] Maintenance of road side Drains including minor slip clearence , reshaping ,deepening and ,regrading ,as well as catch water drains as per technical specification Clause 1907. 3]Maintenance of shoulders to the required level by filling/cutting the soil and its compacting including disposal of the surplus material in approved muck disposal points as per specification clause 1903 . 4] Maintenance of scuppers & Culverts by way of clearing, Cleaning, Erosion repair, repairs to cracks, parapet walls and Protection works as per drawing and technical specification Clasue 1908. 5] Maintenance of Causeway by way of minor Surface repairs, replacing Guide Posts, repair of flood gauges, removal of debris, providing boulders and protection work and painting as per technical specification Clause 1909. 6] Maintenance of road signs by way of cleaning and repainting of mandatory / requlatory / cautionary / informatory and place identifications sign board as per drawings and technical specification Clause 1910. 7] Maintenance of 200 metre km stone by way of refiting of tilted stones repairing with cement mortar, cleaning, repairing and lettering on 200 metre km stone and 5th km stone as per drawing and technical specification Clause 1912. 8} Repairing of pot holes by removal of loose material, trimming of sids, cleaning of surface and providing tack coat bitumen imulsion and patch repair with 20 mm thick premix carpeting and Type B seal coat using bitumen or catonic bitumen imulsion (in 3rd and 5th year). 9] Two coat white washing on parapet walls of CD work ,edge stones, tree truncks, and prominent rock patches on hill sides including preparation of surface by cleaning scraping etc. as per technical specifications Clause 191.

Ist Year

Iind Year

IIIrd Year

Ivth Year

Vth Year