Pradhan Mantri Gram Sadak Yojana Tender

Cnstruction of R.R stone masonary in cement mortar 1:5 including supply of all material labour T&P royality etc required for proper completion of work as directed by engineer in charge and MORD specification for rural road 2014

construction of R.R stone masonary laid in dry including bond stone, supply of all material labour T&P royality etc required for proper completion of work as directed by engineer in charge and MORD specification for rural road 2014.

HP stone filling in back of structure including supply of all material labour T&P royality etc required for proper completion of work as directed by engineer in charge and MORD specification for rural road 2014.

Providing weephole in brick masonary/stone masonary, plain/reinforced concrete abutment, wing wall, return wall with 100mm dia AC pipe extending through the full width of the structure with slope of 1(v):20(H) towards drawing face complete as per drawing and techncial specification clauses 614,709,1204.3.7

Protection work for the wire creat

Excavation in foundation for structure in all type of soil & rock including all lead lift and disposal of surplus material as directed by engineer in charge and Mord specification for rural road 2014

Providing and laying of boulder apron laid in wire crates with 4 mm dia G.I. Wire conforming to IS: 280 & IS: 4826 in 100mm x 100mm mesh (woven diagonally) including 10% extra for laps and joints laid with stone boulders weighting not less than 25 Kg each as per drawing and technical specification clause 13010

Protecttion work for parapet

Construction of R.R stone masonary in cement mortar 1:5 including supply of all material labour T&P royality etc required for proper completion of work as directed by engineer in charge and Mord specification for rural road 2014

Providing concrete for plain/reinforced concrete in open foundation complete as per drawing and technical specification clause 802,803,1202&1203 Nominal mix(1:2:4)

Cnstruction of hill side drain in accordance with the requirement of specification true to lines and grades. Dimension and other particulars as per drawing and technical specification clause 1606.1 cement plaster 15mm thick 1:4 on stone masonary

White washing two coat on parapet walls and tree trunk including preparation of surface by cleaning scraping etc. as per technical specification clause 1916 of MORD specification for rural road 2014

Side Drain

Excavation in foundation for structure in all type of soil & rock including all lead lift and disposal of surplus material as directed by engineer in charge and Mord specification for rural road 2014

Pillars

Construction of Reference Pillars ( totally under ground ) of length 200 mm, width 200 mm and height 300 mm ) as per Fig. 1600.1 (b) and Technical Specification Clause 1602.1 of MORD specifications for rural roads.

Construction of Back Pillars , of length 300 mm, width 300 mm and height 400 mm of which 100 mm shall be below ground level as per Fig. 1600.1 (b) and Technical Specification Clause 1602.3 of MORD specifications for rural roads.

Construction of Job Pillers of length 400mm, width 400mm and km height 600mm of which 100 mm shall be below ground level as per Fig. 1600.1 (d) and Technical Specification Clause 1602.4 of MORD specifications for rural roads.

ROAD FURNITURE

Reinforced cement concrete M15 grade kilometre stone /local stone of standard design as per IRC 8 fixing in position including painting and printing etc as per drawing and technical specification clause 1703 ordinary kilometer stone (precast)

Reinforced cement concrete M15 grade kilometre stone /local stone of standard design as per IRC 8 fixing in position including painting and printing etc as per drawing and technical specification clause 1703 200m kilometer stone (precast)

Providing and fixing 'Logo' of PMGSY project each Providing and Fixing of typical PMGSY informatory sign board with logo as per MORD specifications and drawing. Three MS plate of 1.6mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of the lower most plate will be welded with MS angle iron frame 25mm x 25mm x 5mm. The angle iron frame of the lower plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level.the top most diamond plate will be welded to middle plate by 47 mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides.Latering and printing arrows, borde etc will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour.All sections of framed posts and steel tube will be painted with painted with primer and two coats of epoxy paint as per drawing Clause 1701 and annexure 1700.1

Providing & fixing of Semi reflective Traffic Sign Boards (cautionary, mandatory & informatory) as per standard drawing duly painted and written as directed by engineer in charge as per IRC/Mord specification for rural road 2014

Providing & fixing of PMGSY Logo Board at starting point, end point and at every 2 Km distance of road length as per attached standard drawing duly painted and written as per MORD specification and direction by Engineer in charge/ as per MORD specification for rural road 2014

Providing & fixing of Citizen Information Board with PMGSY Logo at starting or prominent location (where maximum no. of citizens can view the detail of the road) as per attached standard drawing dully painted and written as per the MORD specification and direction of Engineer-in-charge/ as per MORD specification for rural road 2014.

Providing & fixing of maineteance board with PMGSY Logo at starting or prominent location as per attached standard drawing dully painted and written as per MORD specification and direction of engineer-in-charge.

Providing and fixing of Semi-Reflective Traffic sign Direction and place indentification sign upto 0.9sqm size board.Providing and erecting direction and place identifications of semi reflective sign boards as per IRC:67 made of 2mm thick M.S. sheet duly stove enameled paint in white colour in front and grey colour on back with red reflective border of 70mm width and required message, letters, figures with reflective engineering grade tape as per MORD specifications of required shade and colour. supported and welded on 47mm x 47mm of 12SWG square tube of 3050mm height duly strengthened by 25mm x 5mm M.S. flat iron on edges on back firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450mm x 450mm x 600mm, 6000mm below ground level as per approved drawing and Techincal specification Clause 1701.

Cross Drainage Work

Excavation in foundation for structure in all type of soil & rock including all lead lift and disposal of surplus material as directed by engineer in charge and Mord specification for rural road 2014

Providing and laying of concrete for renforced concrete for structure including supply of all material labour T&P shuttering centering royality etc required for proper completion of work as directed by engineer in charge and mord specification for rural road 2014RCC grade M20

Supplying, fitting, and placing HYSD bar reinforcement in superstructure complete tonne as per drawing and technical specifications Clauses 1002, 1010 and 1202. (The reinforcement steel shall be as per clause no. 2011.3.1 of MORD specifications (First Revision'2014) and IS 1786:2008 clause no. 1.6).

Providing and laying of concrete for plain concrete in open foundation for structure including of all material labour T&P royality etc required for proper completion of work as directed by engineer in charge and Mord specification for rural road 2014 PCC grade M0

Construction of R.R stone masonary in cement mortar 1:5 including supply of all material labour T&P royality etc required for proper completion of work as directed by engineer in charge and Mord specification for rural road 2014

Random rubble stone masonary laid in 1:6 cement and sand mortar in breast wall, retaining wall, parapet,scupper etc including supply of all material labour, t&P and royalities etc. (As per PWD uttarakhand specification

construction of R.R stone masonary laid in dry including bond stone, supply of all material labour T&P royality etc required for proper completion of work as directed by engineer in charge and MORD specification for rural road 2014.

HP stone filling in back of structure including supply of all material labour T&P royality etc required for proper completion of work as directed by engineer in charge and MORD specification for rural road 2014.

Stone masonary in cement mortar for substructure complete as per drawing & technical specification clause 702,704,1202,1204 in 1:4 cement mortar

Stone masonary in cement mortar for substructure complete as per drawing & technical specification clause 702,704,1202,1204 in 1:5 cement mortar

Providing and laying reinforeced cement concrete in superstructure as per drawing and technical specification clause 800,1205.4 and 1205.5 RCC grade M25

Supplying, fitting, and placing HYSD bar reinforcement in superstructure complete tonne as per drawing and technical specifications Clauses 1002, 1010 and 1202. (The reinforcement steel shall be as per clause no. 2011.3.1 of MORD specifications (First Revision 2014) and IS 1786:2008 clause no.1.6.

Draingae spout complete as per drawing and technical specification clause 1209

Tubular steel railling on medium weight steel channel (ISMC series) 100mm*50mm providing , fixing and erecting 50mm dia steel pipe railling in 3 rows duly painted on medium weight steel channel (ISMC series ) 100mm*50mm, 1.2 m above ground, 2m centre to centre, complete as per approved drawing claus e1706

Environment Protection Work

Excavation in foundation for structure in all type of soil & rock including all lead lift and disposal of surplus material as directed by engineer in charge and Mord specification for rural road 2014

Providing and laying wire crates 3.00*1.50*1.50 in size with a 8 gauge BWG GI wire confirming to IS :280 & IS 4826 in 150mm*150mm mesh laid with stone boulders weighing not less than 25 kg each. (as per Pwd uttarakhand specification)

Other works

Surveying & preparation of detailed project report DPR

Maintenance Activities:

Emmergency Maintenance Activities

Major Slip Clearnace in all Type of soil, rock and boulders including cost of all material, material machine T&P etc required for proper completion of work as per MORD specification of work 1611

Ist year

IInd year

Deploying Hydraulic excavator of 0.90cum bucket for clearence of Major slip in all type of soil rock and boulders including its operator,pol and all other charges required for proper compeletion of work

Ist year

IInd year

Providing and laying of boulder apron laid in wire crates with 4 mm dia GI wire (@ 32 Kg/ 10 Sqm) conforming to IS:280 and IS:4826 in 100 mm x 100 mm mesh (woven diagonally) including 10 per cent extra for laps and joints laid with stone boulders weighing not less than 25kg each as per drawing and technical specification 1301

Ist year

IInd year

Coolie Walling including supply of all material, labour, T&P,royalty etc. Required for proper completion of the work,as directed by Engineer-in-charge and as per PWD 8.90 specifications (for opening communication only)

Ist year

IInd year

PBMC Activities

Maintenance under PBMC for 1] Trimming of grass and weeds from the shoulders/berms and disposing off the same to suitable locations as per technical specifications Clause 1914. 2] Maintenance of road side Drains including minor slip clearnace reshaping, deeping and regarding as well as catch water drains as per technical specification Clause 1907. 3] Maintenance of shoulders to the required level by filling/cutting the soil and its compacting including disposal of the surplus material in approved muck disposal points as per specifcation clause 1903. 4) Maintenance of scuppers & culverts by way of clearing, Cleaning, Erosion repair, repair to cracks,parapet walls and protection work \s as per drawing and techincal specification clause 1908. 5) Maintenance of clauseway by way of minor surface repairs, replacing guide posts, repair of flood guage, removal of debris, providing boulder and boulders and protection work and painting as per techincal specification Clauase1910 6) Maintenance of road signs by way of cleaning and repainting of mandatory / requlatory / cautionary / informatory and place identifications sign board as per drawings and technical specification Clause 1910. 7] Maintenance of 200 metre km stone by way of refiting of tilted stones repairing with cement mortar, cleaning, repairing and lettering on 200 metre km stone and 5th km stone as per drawing and technical specification Clause 1912. 8] Two coat White washing on parapet walls of CD work, edge stons , tree trincks and prominent rock patches on hill sides including preparation of surface by cleaning scraping etc. as per technical specifications Clause 191.

Ist year

IInd year