Pradhan Mantri Gram Sadak Yojana Tender
View complete overview of Uttarakhand PMGSY Tender
Pradhan Mantri Gram Sadak Yojana - PMGSY Tender
Civil And Construction
Eprocure
Opening Date9 Jan 2020
Closing Date22 Jan 2020
Tender Amount₹ 4,86,63,533
Costs
EMD
₹ 9,92,000Document Cost
₹ 5,000Tender Fee
Refer Documents
Summary
Ut-02-12, Ut-12-13, Ut-02-14, 30 Mtr Span Steel Truss At Km-1, 36 Mtr Span Steel Truss At Km-6 (xs 5/3-5/5) And 24 Mtr Span Steel Truss At Km-6 (xs-5/7-5/3) Of Supi To Jhuni. (wapcos)
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2020_CCUK_87027_1Bid Award Id
ViewTender No
UT0212Tender Authority
Pradhan Mantri Gram Sadak Yojana ViewPurchaser Address
-Website
http://http://omms.nic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Odinary Soil( Manual Means) Up to 3.0 M
436.19
-
-
... More
Odinary Rock ( Manual Means) Up to 3.0 M
280.83
-
-
... More
Providing and laying M15 Grade PCC using 43/53 grade Ordinary Portland Cement, 20mm & down stone aggregate and approved quality sand below open foundations as per the Drawings, Specifications enclosed with the tender document and MoRT&H Specifications for Road and Bridge Works.
43.62
-
-
... More
Providing and placing M25 grade cement concrete (RCC) in open foundations using 43/53 grade Ordinary Portland Cement, 20mm & down stone aggregate and approved quality sand including the cost of centring Using Concrete Mixerand shuttering (excluding the cost of reinforcement only which shall be paid separately) with all leads, lifts/depths and all complete as per the Drawings, Specifications enclosed with the tender document and MoRT&H Specifications for Road and Bridge Works.
Using Concrete Mixer
134.57
-
-
... More
Providing and placing in FOUNDATION position HYSD (Fe 500 Grade) reinforcement bars in various structural elements of the bridge including cutting, straightening, bending, fabricating, storing, binding with mild steel annealed binding wire of 18 SWG, fixing in position complete as per the Drawings, Specifications enclosed with the tender document and MoRT&H Specifications for Road and Bridge Works. (Including 20mm dia dowel bars in rock as well as in foundation)
10.56
-
-
... More
ABUTMENTS AND FILLING BEHIND:
-
-
-
... More
Providing and placing M25 grade cement concrete (RCC) in SUB-STRUCTURE using 43/53 grade Ordinary Portland Cement, 20mm & down stone aggregate and approved quality sand including the cost of centring Using Concrete Mixerand shuttering (excluding the cost of reinforcement only which shall be paid separately) with all leads, lifts/depths and all complete as per the Drawings, Specifications enclosed with the tender document and MoRT&H Specifications for Road and Bridge Works.
Using Concrete Mixer
131.48
-
-
... More
Providing weep holes in abutment walls, return walls etc. with 100mm dia AC pipe, extending through the full width of the structure with slope of 1V:20H towards draining face as per the Drawings, Specifications enclosed with the tender document and MoRT&H Specifications for Road and Bridge Works. Item to include all labour, materials, tools, equipment, safety measures and incidentals necessary to complete the work to Specifications.
160
-
-
... More
Providing and laying of Filter Media with granular materials/stone, crushed aggregates satisfying the requirements laid down in Clause 2504.2.2 of MoRT&H Specifications for Road and Bridge Works to a thickness of not less than 600mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutments, return walls etc. to the full height compacted to a firm condition complete as per the Drawings and Specifications.
80.04
-
-
... More
Providing and laying well compacted selected granular backfilling material (as per appendix 6 of IRC: 78- 2014) behind abutments, return walls etc. complete as per the Drawings, Specifications enclosed with the tender document and MoRT&H Specifications for Road and Bridge Works.
175
-
-
... More
Providing and placing in SUB-STRUCTURE position HYSD (Fe 500 Grade) reinforcement bars in various structural elements of the bridge including cutting, straightening, bending, fabricating, storing, binding with mild steel annealed binding wire of 18 SWG, fixing in position complete as per the Drawings, Specifications enclosed with the tender document and MoRT&H Specifications for Road and Bridge Works.
Using Concrete Mixer
15
-
-
... More
SUPER STRUCTURE
-
-
-
... More
Supply and fabrication of steel truss ( Structure ) bridge as per detailed drawing. Supply of all structural steel confirming to I.S. 226 - 1969 required for proper completion of bridge including ground erection of the bridge and including one coat of approved quality anty corrosive red oxide paint confirming I.S. 5660 as per specification and drawong including all T&Petc. nuts & bolts, washers, railing of MS flat and also including supply and fixing of shop rivets refered as per drawing. The rates shall include ground errection in thr workshop and its dismantle after inspection, approval and removing of deffects, match marking of all parts numberings and proper stacking in the premises of workshop before cartage to site of work. The work shall be execuited in accordance with I.S. 1915 - 1961 and its latest revision shall be applicable. The rate shall including cost of all materials, its wastage and cutting, bending if required, welding, making holes, shop rivetting, labour, T&Petc. and also including proper stacking after dismantling of ground erection. All required equipments should be arranged by the contractor as his own cost, which shall be taken back by the contractor after satisfactory execution of the job. Also including supply materials. T&P etc. required for proper copletion of the work as per direction of Engineer - In - Charge.
41
-
-
... More
Erection of Steel Truss Structere Bridge as per drawing with required camber including cartage of fabricated parts from the place of stack near site including submission of launching plan by the contractor, (duly weighted by a recognised reputable institution/consultant ) and approved by the engineer-in-charge. Service bolts to used shall be of GKW make or any other as approved by engineer-in-charge, including cost of all labor, T&P, equipments and consumables required for proper completion of the work as per MoRT&H Specifications for Road and Bridge Works no. 1905 and as per directions of the engineer-in-charge.
41
-
-
... More
Supplying, fitting and fixing in position true to line and level cast steel rocker and rollar & rocker bearing conforming to IRC: 83(Pt.-1) section IX and clause 2003 of MoRTH specifications complete including all accessories as per drawing and Technical Specifications.The bearing design and drawings shall be got approved from the Engineer-in-charge well before start of the fabrication of bearings. The bearings shall be tested as per the provisions of IRC: 83 in the presence of authorized representative of the Department. The installation of bearings shall be done in the presence of authorized representative of the bearing manufacturer who shall certify the quality of work.
2
-
-
... More
Supplyong and fixing of 16 - 22 mm dia field rivets as per drawing confirming to designation IS 42 RIS - 1148 - 1973 including rivetting with rivet gun, its wastage, labour T&P etc required for proper completion of the work as per Direction of Engineer In Charge.
5130
-
-
... More
Providing and applying two coats of ready mix paint of approved brand on steel surface after through cleaning of surface to give an even shade.
1001
-
-
... More
Providing and placing M25 grade cement concrete (RCC) in SUPER-STRUCTURE using 43/53 grade Ordinary Portland Cement, 20mm & down stone aggregate and approved quality sand including the cost of centring Using Concrete Mixerand shuttering (excluding the cost of reinforcement only which shall be paid separately) with all leads, lifts/depths and all complete as per the Drawings, Specifications enclosed with the tender document and MoRT&H Specifications for Road and Bridge Works.
Using Concrete Mixer
28.02
-
-
... More
Providing and placing in SUPER-STRUCTURE position HYSD (Fe 500 Grade) reinforcement bars in various structural elements of the bridge including cutting, straightening, bending, fabricating, storing, binding with mild steel annealed binding wire of 18 SWG, fixing in position complete as per the Drawings, Specifications enclosed with the tender document and MoRT&H Specifications for Road and Bridge Works.
5
-
-
... More
Supply & fixing of Drainage spout as per drawing & technical specification clause 1209 including supply of all materials, labour, T&P etc required for proper completion of the work.
16
-
-
... More
Providing and laying of strip seal expansion joint catering to maximum horizontal movement upto 70mm( complete as per approved drawings and standard specifications )to be installed by the manufacturer/supplier or their authorised representative ensuring compliance to the manufacturer's instructions forinstallation.
9.5
-
-
... More
PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification
5.51
-
-
... More
Providing and laying Cement concrete in approach slab M-25 grade including reinforcement complete as per drawing and Technical Specifications
13.47
-
-
... More
Providing and laying cement concrete wearing coat M - 30 grade including reinforcement complete as per drawing and technical specification Clauses. 800 and 1206.3 of MORD Sr. no. 13.5
8.18
-
-
... More
PROTECTION WORK
-
-
-
... More
Excavation in foundation in all type of soil and rock met at site as per drawing and technical specifications clause 305.1 including setting out construction of shoring and bracing, removal of stumps and other deteterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material,as directed by Engineer- in-Charge. Also including dewatering from foundation trenches during excavation of foundation, laying of concrete etc including supplyof all materials, labour, T&P etc. also including higher charges / cost of dewatering pumps and fuel etc required for proper completion of the work.cost of all material,labour, T&P and machinery etc. required for proper completion of the work.
245
-
-
... More
Providing concrete for plain/ reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 P.C.C grade M 10 Nominal mix 1:3:6
24.34
-
-
... More
Construction of R.R. stone masonary in cement mortar 1:5 including supply of all materials,labour, T&P,Royalty etc required for proper completion of work as directed by Engineer-in-charge and MORD Specification for Rural Roads 2014.
303.6
-
-
... More
Cement plum masonry with 40% plum & 60% 1:3:6 cement concrete including supply of all material, labour, T&P, Roylty etc. required for proper completion of the work as per direction of Engineer in Charge.
101.25
-
-
... More
Hand Packed stone filling in back of wallls including cost of all materials,royality, T&P etc. complete as per direction of Engineer-in- charge. (As per PWD Uttarakhand specifications)
144
-
-
... More
Providing and laying of boulder apron laid in wire crates for weir etc with 4 mm dia GI wire conforming to IS:280 and IS:4826 in 100 mm x 100 mm mesh (woven diagonally) including 10% extra for laps and joints laid with stone boulders weighting not less than 25 Kg each as per drawing and technical specification Clause 1301. Sr.no:- 14.2
67.5
-
-
... More
PARAPET & Other Work
-
-
-
... More
Providing and fixing of C.C edge stones 12cm *12cm*60cm size precast in M15 cement concrete with 4 nos. 8 mm dia HYSD vertical bars and 3 nos 6mm dia MS bar stirrups as per approved drawing including two coat white washing on valley side of formation as directed by Engineer-in-charge and MORD Specification for Rural Roads 2014.
50
-
-
... More
Excavation in foundation for structures in all types of soils and rocks including all lead, lift and disposal of surplus material as directed by Engineer-in-charge and MORD Specification for Rural Roads 2014.
11.4
-
-
... More
Providing and laying of concrete for plain concrete in open foundations for structures including supply of all materials, labour, T&P, royalty etc. required for proper completion of work as directed by Engineer-in-charge and MORD Specification for Rural Roads 2014. P.C.C grade M 15
11.4
-
-
... More
Construction of R.R. stone masonary in cement mortar 1:5 including supply of all materials,labour, T&P,Royalty etc required for proper completion of work as directed by Engineer-in-charge and MORD Specification for Rural Roads 2014. (Bond Stone will be paid separately)
31
-
-
... More
Pointing with cement mortar 1:3 including supply of all materials, labour,t&p&royalty etc,required for proper completion of work as directed by Engineer-in-charge and MORD specifications Clauses No.613.3
72
-
-
... More
15 mm thick Plastering with cement mortar 1:4 including supply of all materials, labour,t&p&royalty etc,required for proper completion of work as directed by Engineer-in-charge and MORD specifications Clauses No.613.4
104
-
-
... More
Providing and laying of concrete for plain concrete for substructure including supply of all materials, labour,T&P,royalty etc. required for proper completion of work as directed by Engineer-in-charge and MORD Specification for Rural Roads 2014. P.C.C grade M 20.
1.2
-
-
... More
White washing two coats on parapet walls and tree trunks including preparation of surface by cleaning scraping etc. as per technical specifications Clause 1916 of MORD Specification for Rural Roads 2014
230
-
-
... More
Side Drain
-
-
-
... More
Construction of hill side drain in accordance with the requirement of specifications true to lines and grades. Dimesions and other particulars as per drawing and Technical Specification Clause 1606.1 (Type-A)
-
-
-
... More
Earthwork in excavation for structures as per drawing and technical specification
13.5
-
-
... More
Plain cement concrete M10 grade
4.5
-
-
... More
Plain cement concrete M15 grade
13.5
-
-
... More
OTHER WORK
-
-
-
... More
Providing and Fixing Title Information Board with PMGSY Logo of PMGSY Project Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1
1
-
-
... More
Providing and Fixing Citizen informatry of PMGSY Project Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1
1
-
-
... More
Providing and Fixing Maintance Board of PMGSY Project Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1
1
-
-
... More
FIVE YEAR MAINTENANCE WORK
-
-
-
... More
Cement plum masonry with 40% plum & 60% 1:3:6 cement concrete including supply of all material, labour, T&P, Roylty etc. required for proper completion of the work as per direction of Engineer in Charge.(As per PWD Uttarakhand specifications)
-
-
-
... More
3rd year
30
-
-
... More
5th year
35
-
-
... More
Greasing of bearing
-
-
-
... More
IInd year =2X5.50
1
-
-
... More
IV th year =2X5.50
1
-
-
... More
Painting on Steel Surfaces Providing and applying two coats of ready mix paint including primer coat of approved brand on steel surface after through cleaning of surface to give an even shade as per drawing and Technical Specification Clause 1701.
-
-
-
... More
3rd year
1001
-
-
... More
White washing of parapet walls of CD work and tree truncks including preparation of surface by cleaning scrapping etc. as per MORD Specification for Rural Roads 2014
-
-
-
... More
Ist year
176
-
-
... More
IInd year
176
-
-
... More
III rd year
176
-
-
... More
IV th year
176
-
-
... More
V th year
176
-
-
... More
Construction of 36 m span steel truss moter bridge in Km 6 (XS 5/3-5/5 of Supi to Jhuni M/R
-
-
-
... More
FOUNDATIONS:
-
-
-
... More
Earth work in excavation of foundation of structures as per the Drawings, Specifications enclosed with the tender dacument Ministry of Shipping, Road Transport & Highways (MoRT&H) Specifications for Road and Bridge Works.
-
-
-
... More
For Abutment
-
-
-
... More
Odinary Soil( Manual Means) Up to 3.0 M
369.37
-
-
... More
Odinary Rock ( Manual Means) Up to 3.0 M
330.53
-
-
... More
Providing and laying M15 Grade PCC using 43/53 grade Ordinary Portland Cement, 20mm & down stone aggregate and approved quality sand below open foundations as per the Drawings, Specifications enclosed with the tender document and MoRT&H Specifications for Road and Bridge Works.
36.94
-
-
... More
Providing and placing M25 grade cement concrete (RCC) in open foundations using 43/53 grade Ordinary Portland Cement, 20mm & down stone aggregate and approved quality sand including the cost of centring Using Concrete Mixerand shuttering (excluding the cost of reinforcement only which shall be paid separately) with all leads, lifts/depths and all complete as per the Drawings, Specifications enclosed with the tender document and MoRT&H Specifications for Road and Bridge Works.
Using Concrete Mixer
84.73
-
-
... More
Providing and placing in FOUNDATION position HYSD (Fe 500 Grade) reinforcement bars in various structural elements of the bridge including cutting, straightening, bending, fabricating, storing, binding with mild steel annealed binding wire of 18 SWG, fixing in position complete as per the Drawings, Specifications enclosed with the tender document and MoRT&H Specifications for Road and Bridge Works. (Including 20mm dia dowel bars in rock as well as in foundation)
6.65
-
-
... More
ABUTMENTS AND FILLING BEHIND:
-
-
-
... More
Providing and placing M25 grade cement concrete (RCC) in SUB-STRUCTURE using 43/53 grade Ordinary Portland Cement, 20mm & down stone aggregate and approved quality sand including the cost of centring Using Concrete Mixerand shuttering (excluding the cost of reinforcement only which shall be paid separately) with all leads, lifts/depths and all complete as per the Drawings, Specifications enclosed with the tender document and MoRT&H Specifications for Road and Bridge Works.
Using Concrete Mixer
89.9
-
-
... More
Providing weep holes in abutment walls, return walls etc. with 100mm dia AC pipe, extending through the full width of the structure with slope of 1V:20H towards draining face as per the Drawings, Specifications enclosed with the tender document and MoRT&H Specifications for Road and Bridge Works. Item to include all labour, materials, tools, equipment, safety measures and incidentals necessary to complete the work to Specifications.
114
-
-
... More
Providing and laying of Filter Media with granular materials/stone, crushed aggregates satisfying the requirements laid down in Clause 2504.2.2 of MoRT&H Specifications for Road and Bridge Works to a thickness of not less than 600mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutments, return walls etc. to the full height compacted to a firm condition complete as per the Drawings and Specifications.
54.61
-
-
... More
Providing and laying well compacted selected granular backfilling material (as per appendix 6 of IRC: 78- 2014) behind abutments, return walls etc. complete as per the Drawings, Specifications enclosed with the tender document and MoRT&H Specifications for Road and Bridge Works.
109
-
-
... More
Providing and placing in SUB-STRUCTURE position HYSD (Fe 500 Grade) reinforcement bars in various structural elements of the bridge including cutting, straightening, bending, fabricating, storing, binding with mild steel annealed binding wire of 18 SWG, fixing in position complete as per the Drawings, Specifications enclosed with the tender document and MoRT&H Specifications for Road and Bridge Works.
Using Concrete Mixer
11
-
-
... More
SUPER STRUCTURE
-
-
-
... More
Supply and fabrication of steel truss ( Structure ) bridge as per detailed drawing. Supply of all structural steel confirming to I.S. 226 - 1969 required for proper completion of bridge including ground erection of the bridge and including one coat of approved quality anty corrosive red oxide paint confirming I.S. 5660 as per specification and drawong including all T&Petc. nuts & bolts, washers, railing of MS flat and also including supply and fixing of shop rivets refered as per drawing. The rates shall include ground errection in thr workshop and its dismantle after inspection, approval and removing of deffects, match marking of all parts numberings and proper stacking in the premises of workshop before cartage to site of work. The work shall be execuited in accordance with I.S. 1915 - 1961 and its latest revision shall be applicable. The rate shall including cost of all materials, its wastage and cutting, bending if required, welding, making holes, shop rivetting, labour, T&Petc. and also including proper stacking after dismantling of ground erection. All required equipments should be arranged by the contractor as his own cost, which shall be taken back by the contractor after satisfactory execution of the job. Also including supply materials. T&P etc. required for proper copletion of the work as per direction of Engineer - In - Charge.
47
-
-
... More
Erection of Steel Truss Structere Bridge as per drawing with required camber including cartage of fabricated parts from the place of stack near site including submission of launching plan by the contractor, (duly weighted by a recognised reputable institution/consultant ) and approved by the engineer-in-charge. Service bolts to used shall be of GKW make or any other as approved by engineer-in-charge, including cost of all labor, T&P, equipments and consumables required for proper completion of the work as per MoRT&H Specifications for Road and Bridge Works no. 1905 and as per directions of the engineer-in-charge.
47
-
-
... More
Fitting and fixing in position true to line and level sliding plate bearing with PTFE surface sliding on stainless steel (including Cost of Bearing) complete including all accessories as per drawing and Technical Specifications and BS: 5400, section 9.1 & 9.2 (for PTFE) and clause 2004 of MoRTH Specifications.The bearing design and drawings shall be got approved from the Engineer-in-charge well before start of the fabrication of bearings. The bearings shall be tested as per the provisions of IRC: 83 in the presence of authorized representative of the Department. The installation of bearings shall be done in the presence of authorized representative of the bearing manufacturer who shall certify the quality of work.
2
-
-
... More
Supplyong and fixing of 16 - 22 mm dia field rivets as per drawing confirming to designation IS 42 RIS - 1148 - 1973 including rivetting with rivet gun, its wastage, labour T&P etc required for proper completion of the work as per Direction of Engineer In Charge.
4844
-
-
... More
Providing and applying two coats of ready mix paint of approved brand on steel surface after through cleaning of surface to give an even shade.
1227
-
-
... More
Providing and placing M25 grade cement concrete (RCC) in SUPER-STRUCTURE using 43/53 grade Ordinary Portland Cement, 20mm & down stone aggregate and approved quality sand including the cost of centring Using Concrete Mixerand shuttering (excluding the cost of reinforcement only which shall be paid separately) with all leads, lifts/depths and all complete as per the Drawings, Specifications enclosed with the tender document and MoRT&H Specifications for Road and Bridge Works.
Using Concrete Mixer
31.74
-
-
... More
Providing and placing in SUPER-STRUCTURE position HYSD (Fe 500 Grade) reinforcement bars in various structural elements of the bridge including cutting, straightening, bending, fabricating, storing, binding with mild steel annealed binding wire of 18 SWG, fixing in position complete as per the Drawings, Specifications enclosed with the tender document and MoRT&H Specifications for Road and Bridge Works.
5
-
-
... More
Supply & fixing of Drainage spout as per drawing & technical specification clause 1209 including supply of all materials, labour, T&P etc required for proper completion of the work.
16
-
-
... More
Providing and laying of strip seal expansion joint catering to maximum horizontal movement upto 70mm( complete as per approved drawings and standard specifications )to be installed by the manufacturer/supplier or their authorised representative ensuring compliance to the manufacturer's instructions forinstallation.
9.5
-
-
... More
PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification
5.76
-
-
... More
Providing and laying Cement concrete in approach slab M-25 grade including reinforcement complete as per drawing and Technical Specifications
14.08
-
-
... More
Providing and laying cement concrete wearing coat M - 30 grade including reinforcement complete as per drawing and technical specification Clauses. 800 and 1206.3 of MORD Sr. no. 13.5
9.78
-
-
... More
PROTECTION WORK
-
-
-
... More
Excavation in foundation in all type of soil and rock met at site as per drawing and technical specifications clause 305.1 including setting out construction of shoring and bracing, removal of stumps and other deteterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material,as directed by Engineer- in-Charge. Also including dewatering from foundation trenches during excavation of foundation, laying of concrete etc including supplyof all materials, labour, T&P etc. also including higher charges / cost of dewatering pumps and fuel etc required for proper completion of the work.cost of all material,labour, T&P and machinery etc. required for proper completion of the work.
576
-
-
... More
Providing concrete for plain/ reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 P.C.C grade M 10 Nominal mix 1:3:6
47.45
-
-
... More
Construction of R.R. stone masonary in cement mortar 1:5 including supply of all materials,labour, T&P,Royalty etc required for proper completion of work as directed by Engineer-in-charge and MORD Specification for Rural Roads 2014.
780
-
-
... More
Cement plum masonry with 40% plum & 60% 1:3:6 cement concrete including supply of all material, labour, T&P, Roylty etc. required for proper completion of the work as per direction of Engineer in Charge.
202.5
-
-
... More
Hand Packed stone filling in back of wallls including cost of all materials,royality, T&P etc. complete as per direction of Engineer-in- charge. (As per PWD Uttarakhand specifications)
302.4
-
-
... More
Providing and laying of boulder apron laid in wire crates for weir etc with 4 mm dia GI wire conforming to IS:280 and IS:4826 in 100 mm x 100 mm mesh (woven diagonally) including 10% extra for laps and joints laid with stone boulders weighting not less than 25 Kg each as per drawing and technical specification Clause 1301. Sr.no:- 14.2
112.5
-
-
... More
PARAPET & Other Work
-
-
-
... More
Providing and fixing of C.C edge stones 12cm *12cm*60cm size precast in M15 cement concrete with 4 nos. 8 mm dia HYSD vertical bars and 3 nos 6mm dia MS bar stirrups as per approved drawing including two coat white washing on valley side of formation as directed by Engineer-in-charge and MORD Specification for Rural Roads 2014.
50
-
-
... More
Construction of Parapets in R.R. stone masonry laid 1:5 cement sand mortar without PCC in foundation including top cement concrete 2.5 cm. thick in M20 and 15 mm. thick cement flush pointing in 1:3 cement sand mortar in front side and plaster 1:4 cement sand mortar in back & both sides.
-
-
-
... More
Excavation in foundation for structures in all types of soils and rocks including all lead, lift and disposal of surplus material as directed by Engineer-in-charge and MORD Specification for Rural Roads 2014.
11.4
-
-
... More
Providing and laying of concrete for plain concrete in open foundations for structures including supply of all materials, labour, T&P, royalty etc. required for proper completion of work as directed by Engineer-in-charge and MORD Specification for Rural Roads 2014. P.C.C grade M 15
11.4
-
-
... More
Construction of R.R. stone masonary in cement mortar 1:5 including supply of all materials,labour, T&P,Royalty etc required for proper completion of work as directed by Engineer-in-charge and MORD Specification for Rural Roads 2014. (Bond Stone will be paid separately)
31
-
-
... More
Pointing with cement mortar 1:3 including supply of all materials, labour,t&p&royalty etc,required for proper completion of work as directed by Engineer-in-charge and MORD specifications Clauses No.613.3
72
-
-
... More
15 mm thick Plastering with cement mortar 1:4 including supply of all materials, labour,t&p&royalty etc,required for proper completion of work as directed by Engineer-in-charge and MORD specifications Clauses No.613.4
104
-
-
... More
Providing and laying of concrete for plain concrete for substructure including supply of all materials, labour,T&P,royalty etc. required for proper completion of work as directed by Engineer-in-charge and MORD Specification for Rural Roads 2014. P.C.C grade M 20.
1.2
-
-
... More
White washing two coats on parapet walls and tree trunks including preparation of surface by cleaning scraping etc. as per technical specifications Clause 1916 of MORD Specification for Rural Roads 2014
230
-
-
... More
Side Drain
-
-
-
... More
Construction of hill side drain in accordance with the requirement of specifications true to lines and grades. Dimesions and other particulars as per drawing and Technical Specification Clause 1606.1 (Type-A)
-
-
-
... More
Earthwork in excavation for structures as per drawing and technical specification
13.5
-
-
... More
Plain cement concrete M10 grade
4.5
-
-
... More
Plain cement concrete M15 grade
13.5
-
-
... More
OTHER WORK
-
-
-
... More
Providing and Fixing Title Information Board with PMGSY Logo of PMGSY Project Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1
1
-
-
... More
Providing and Fixing Citizen informatry of PMGSY Project Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1
1
-
-
... More
Providing and Fixing Maintance Board of PMGSY Project Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1
1
-
-
... More
FIVE YEAR MAINTENANCE WORK
-
-
-
... More
Cement plum masonry with 40% plum & 60% 1:3:6 cement concrete including supply of all material, labour, T&P, Roylty etc. required for proper completion of the work as per direction of Engineer in Charge.(As per PWD Uttarakhand specifications)
-
-
-
... More
3rd year
30
-
-
... More
5th year
35
-
-
... More
Greasing of bearing
-
-
-
... More
IInd year =2X5.50
1
-
-
... More
IV th year =2X5.50
1
-
-
... More
Painting on Steel Surfaces Providing and applying two coats of ready mix paint including primer coat of approved brand on steel surface after through cleaning of surface to give an even shade as per drawing and Technical Specification Clause 1701.
-
-
-
... More
3rd year
1227
-
-
... More
White washing of parapet walls of CD work and tree truncks including preparation of surface by cleaning scrapping etc. as per MORD Specification for Rural Roads 2014
-
-
-
... More
Ist year
176
-
-
... More
IInd year
176
-
-
... More
III rd year
176
-
-
... More
IV th year
176
-
-
... More
V th year
176
-
-
... More
Construction of 24 m span steel truss moter bridge in Km 6 (XS5/7-5/8) of Supi to Jhuni M/R
-
-
-
... More
FOUNDATIONS:
-
-
-
... More
Earth work in excavation of foundation of structures as per the Drawings, Specifications enclosed with the tender dacument Ministry of Shipping, Road Transport & Highways (MoRT&H) Specifications for Road and Bridge Works.
-
-
-
... More
For Abutment
-
-
-
... More
Odinary Soil( Manual Means) Up to 3.0 M
490.86
-
-
... More
Odinary Rock ( Manual Means) Up to 3.0 M
163.62
-
-
... More
Providing and laying M15 Grade PCC using 43/53 grade Ordinary Portland Cement, 20mm & down stone aggregate and approved quality sand below open foundations as per the Drawings, Specifications enclosed with the tender document and MoRT&H Specifications for Road and Bridge Works.
49.08
-
-
... More
Providing and placing M25 grade cement concrete (RCC) in open foundations using 43/53 grade Ordinary Portland Cement, 20mm & down stone aggregate and approved quality sand including the cost of centring Using Concrete Mixerand shuttering (excluding the cost of reinforcement only which shall be paid separately) with all leads, lifts/depths and all complete as per the Drawings, Specifications enclosed with the tender document and MoRT&H Specifications for Road and Bridge Works.
Using Concrete Mixer
154.5
-
-
... More
Providing and placing in FOUNDATION position HYSD (Fe 500 Grade) reinforcement bars in various structural elements of the bridge including cutting, straightening, bending, fabricating, storing, binding with mild steel annealed binding wire of 18 SWG, fixing in position complete as per the Drawings, Specifications enclosed with the tender document and MoRT&H Specifications for Road and Bridge Works. (Including 20mm dia dowel bars in rock as well as in foundation)
12.13
-
-
... More
ABUTMENTS AND FILLING BEHIND:
-
-
-
... More
Providing and placing M25 grade cement concrete (RCC) in SUB-STRUCTURE using 43/53 grade Ordinary Portland Cement, 20mm & down stone aggregate and approved quality sand including the cost of centring Using Concrete Mixerand shuttering (excluding the cost of reinforcement only which shall be paid separately) with all leads, lifts/depths and all complete as per the Drawings, Specifications enclosed with the tender document and MoRT&H Specifications for Road and Bridge Works.
Using Concrete Mixer
164.92
-
-
... More
Providing weep holes in abutment walls, return walls etc. with 100mm dia AC pipe, extending through the full width of the structure with slope of 1V:20H towards draining face as per the Drawings, Specifications enclosed with the tender document and MoRT&H Specifications for Road and Bridge Works. Item to include all labour, materials, tools, equipment, safety measures and incidentals necessary to complete the work to Specifications.
206
-
-
... More
Back filling Behind Abutment (Granular material)
104.64
-
-
... More
Providing and laying well compacted selected granular backfilling material (as per appendix 6 of IRC: 78- 2014) behind abutments, return walls etc. complete as per the Drawings, Specifications enclosed with the tender document and MoRT&H Specifications for Road and Bridge Works.
245
-
-
... More
Providing and placing in SUB-STRUCTURE position HYSD (Fe 500 Grade) reinforcement bars in various structural elements of the bridge including cutting, straightening, bending, fabricating, storing, binding with mild steel annealed binding wire of 18 SWG, fixing in position complete as per the Drawings, Specifications enclosed with the tender document and MoRT&H Specifications for Road and Bridge Works.
Using Concrete Mixer
19
-
-
... More
SUPER STRUCTURE
-
-
-
... More
Supply and fabrication of steel truss ( Structure ) bridge as per detailed drawing. Supply of all structural steel confirming to I.S. 226 - 1969 required for proper completion of bridge including ground erection of the bridge and including one coat of approved quality anty corrosive red oxide paint confirming I.S. 5660 as per specification and drawong including all T&Petc. nuts & bolts, washers, railing of MS flat and also including supply and fixing of shop rivets refered as per drawing. The rates shall include ground errection in thr workshop and its dismantle after inspection, approval and removing of deffects, match marking of all parts numberings and proper stacking in the premises of workshop before cartage to site of work. The work shall be execuited in accordance with I.S. 1915 - 1961 and its latest revision shall be applicable. The rate shall including cost of all materials, its wastage and cutting, bending if required, welding, making holes, shop rivetting, labour, T&Petc. and also including proper stacking after dismantling of ground erection. All required equipments should be arranged by the contractor as his own cost, which shall be taken back by the contractor after satisfactory execution of the job. Also including supply materials. T&P etc. required for proper copletion of the work as per direction of Engineer - In - Charge.
27
-
-
... More
Erection of Steel Truss Structere Bridge as per drawing with required camber including cartage of fabricated parts from the place of stack near site including submission of launching plan by the contractor, (duly weighted by a recognised reputable institution/consultant ) and approved by the engineer-in-charge. Service bolts to used shall be of GKW make or any other as approved by engineer-in-charge, including cost of all labor, T&P, equipments and consumables required for proper completion of the work as per MoRT&H Specifications for Road and Bridge Works no. 1905 and as per directions of the engineer-in-charge.
27
-
-
... More
Supplying, fitting and fixing in position true to line and level cast steel POT PTFE bearing conforming to IRC: 83(Pt.-1) section IX and clause 2003 of MoRTH specifications complete including all accessories as per drawing and Technical Specifications.The bearing design and drawings shall be got approved from the Engineer-in-charge well before start of the fabrication of bearings. The bearings shall be tested as per the provisions of IRC: 83 in the presence of authorized representative of the Department. The installation of bearings shall be done in the presence of authorized representative of the bearing manufacturer who shall certify the quality of work.
2
-
-
... More
Supplyong and fixing of 16 - 22 mm dia field rivets as per drawing confirming to designation IS 42 RIS - 1148 - 1973 including rivetting with rivet gun, its wastage, labour T&P etc required for proper completion of the work as per Direction of Engineer In Charge.
3402
-
-
... More
Providing and applying two coats of ready mix paint of approved brand on steel surface after through cleaning of surface to give an even shade.
669
-
-
... More
Providing and placing M25 grade cement concrete (RCC) in SUPER-STRUCTURE using 43/53 grade Ordinary Portland Cement, 20mm & down stone aggregate and approved quality sand including the cost of centring Using Concrete Mixerand shuttering (excluding the cost of reinforcement only which shall be paid separately) with all leads, lifts/depths and all complete as per the Drawings, Specifications enclosed with the tender document and MoRT&H Specifications for Road and Bridge Works.
Using Concrete Mixer
21.39
-
-
... More
Providing and placing in SUPER-STRUCTURE position HYSD (Fe 500 Grade) reinforcement bars in various structural elements of the bridge including cutting, straightening, bending, fabricating, storing, binding with mild steel annealed binding wire of 18 SWG, fixing in position complete as per the Drawings, Specifications enclosed with the tender document and MoRT&H Specifications for Road and Bridge Works.
4
-
-
... More
Supply & fixing of Drainage spout as per drawing & technical specification clause 1209 including supply of all materials, labour, T&P etc required for proper completion of the work.
16
-
-
... More
Providing and laying of strip seal expansion joint catering to maximum horizontal movement upto 70mm( complete as per approved drawings and standard specifications )to be installed by the manufacturer/supplier or their authorised representative ensuring compliance to the manufacturer's instructions forinstallation.
9.5
-
-
... More
PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification
5.56
-
-
... More
Providing and laying Cement concrete in approach slab M-25 grade including reinforcement complete as per drawing and Technical Specifications
13.6
-
-
... More
Providing and laying cement concrete wearing coat M - 30 grade including reinforcement complete as per drawing and technical specification Clauses. 800 and 1206.3 of MORD Sr. no. 13.5
6.59
-
-
... More
PROTECTION WORK
-
-
-
... More
Excavation in foundation in all type of soil and rock met at site as per drawing and technical specifications clause 305.1 including setting out construction of shoring and bracing, removal of stumps and other deteterious material and disposal upto a lead of 50 m, dressing of sides and bottom and back filling in trenches with excavated suitable material,as directed by Engineer- in-Charge. Also including dewatering from foundation trenches during excavation of foundation, laying of concrete etc including supplyof all materials, labour, T&P etc. also including higher charges / cost of dewatering pumps and fuel etc required for proper completion of the work.cost of all material,labour, T&P and machinery etc. required for proper completion of the work.
329
-
-
... More
Providing concrete for plain/ reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 P.C.C grade M 10 Nominal mix 1:3:6
41.64
-
-
... More
Construction of R.R. stone masonary in cement mortar 1:5 including supply of all materials,labour, T&P,Royalty etc required for proper completion of work as directed by Engineer-in-charge and MORD Specification for Rural Roads 2014.
641.4
-
-
... More
Cement plum masonry with 40% plum & 60% 1:3:6 cement concrete including supply of all material, labour, T&P, Roylty etc. required for proper completion of the work as per direction of Engineer in Charge.
101.25
-
-
... More
Hand Packed stone filling in back of wallls including cost of all materials,royality, T&P etc. complete as per direction of Engineer-in- charge. (As per PWD Uttarakhand specifications)
288
-
-
... More
Providing and laying of boulder apron laid in wire crates for weir etc with 4 mm dia GI wire conforming to IS:280 and IS:4826 in 100 mm x 100 mm mesh (woven diagonally) including 10% extra for laps and joints laid with stone boulders weighting not less than 25 Kg each as per drawing and technical specification Clause 1301. Sr.no:- 14.2
67.5
-
-
... More
OTHER WORK
-
-
-
... More
Providing and Fixing Title Information Board with PMGSY Logo of PMGSY Project Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1
1
-
-
... More
Providing and Fixing Citizen informatry of PMGSY Project Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1
1
-
-
... More
Providing and Fixing Maintance Board of PMGSY Project Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1
1
-
-
... More
FIVE YEAR MAINTENANCE WORK
-
-
-
... More
Cement plum masonry with 40% plum & 60% 1:3:6 cement concrete including supply of all material, labour, T&P, Roylty etc. required for proper completion of the work as per direction of Engineer in Charge.(As per PWD Uttarakhand specifications)
-
-
-
... More
3rd year
30
-
-
... More
5th year
35
-
-
... More
Greasing of bearing
-
-
-
... More
IInd year =2X5.50
1
-
-
... More
IV th year =2X5.50
1
-
-
... More
Painting on Steel Surfaces Providing and applying two coats of ready mix paint including primer coat of approved brand on steel surface after through cleaning of surface to give an even shade as per drawing and Technical Specification Clause 1701.
-
-
-
... More
3rd year
669
-
-
... More
White washing of parapet walls of CD work and tree truncks including preparation of surface by cleaning scrapping etc. as per MORD Specification for Rural Roads 2014
-
-
-
... More
Ist year
176
-
-
... More
IInd year
176
-
-
... More
III rd year
176
-
-
... More
IV th year
176
-
-
... More
V th year
176
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements