Pradhan Mantri Gram Sadak Yojana Tender

Random Rubble Masonry laid dry in breast wall, retaining wall, parapets, scupper etc. Including supply of all materials, labour, t & p and royaltiies etc. complete as per drawing and technical specifications Clauses 702,704,1202 & 1203 of MORD Specifiction

For R/W and B/W

Stone masonry in cement mortar for substructure complete as per drawing & technical specification Clauses 702, 704, 1202 and 1204 {Random rubble masonry In cement mortar (1:5)}

For R/W and B/W

For Parapet

Hand Packed stone filling in back of walls including cost of all materials, royality, T&P etc. complete as per direction of Engineer-in- charge. (As per PWD Uttarakhand specifications) for R/W

Providing and laying of boulder apron laid in wire crates with 4mm dia GIwire (@32Kg/10Sqm) conforming to IS:280 and IS:4826 in 100 mmx100mm mesh (wovendiagonally) including 10 percent extra for lap sand joints laid with stone boulders weighing not less than 25 kg each as per drawing and technical specifications Clause 1301

Providing and fixing of C.C. edge stone 12cm X 12cmX 60cm Size in M-15 Cement Concrete With 4 nos. 8mm dia HYSD vertcal bars and 3 nos. 6mm dia MS bar Strrups as per approved Drawing including 2 coat White washing on valley side of formation as directed by Engineer in Charge.

Providing and laying of concrete for plain concrete in open foundations for structures including supply of all materials, labour, T&P, royalty etc. required for proper completion of work as directed by Engineer-in-charge and MORD Specification for Rural Roads 2014. P.C.C grade M 10. in Parapet

Plastering with cement mortar (1:4), 15 mm thick on Stone masonry in substructure as per technical specification Clauses 613.4 & 1204 in Parapet

Pointing with cement mortar (1:3) on brickwork in parapet as per technical specifications Clauses 613.3 and 1208.4 in Parapet

Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 Nominal mix (1:2:4) in Parapet

White washing of parapet walls of CD work and tree truncks White washing two coats on parapet walls and tree trunks including preparation of surface by cleaning scraping etc. as per technical specifications Clause 1915 in Parapet

Cleaning of Drains Maintenance of Drains The maintenance of drains include erosion,repair, clearing, cleaning, reshaping,regrading, deepening of side drains as well as catch water drains as per technical specification Clause 1907.

Construction of Hill side K C Pucca drain in accordance with the requirement of specification true to line and grades. Dimensions and other particulars as per drawing including all material labour T&P. etc. required for proper completion of the work as directed by Engineer in charge.

Earthwork in excavation for structures Earthwork in excavation for structures as per drawing and technical specifications Clause305.1 including settingout, construction of shoring and bracing, removal of stumps andother deleterious material and disposal up to a lead of 50m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.

Stone masonry in cement mortar for substructure complete as per drawing & technical specification Clauses 702, 704, 1202 and 1204 {Random rubble masonry In cement mortar (1:5)}

Plastering with cement mortar (1:4), 15 mm thick on Stone masonry in substructure as per technical specification Clauses 613.4 & 1204

Repairs of damages caused by rain/spillage of water Preparation and surface treatment of formation by removing mud and slurry, watering to the extent needed to maintain the desired moisture content, trimming to the required line, grade, profile and rolling with three wheel 80-100 kN static roller, complete as per Technical Specification Clause 301.5.5.1 (For Subgrade Prepration)

Excavation in Cutting in Soil by manual means with lead upto 50 m. Excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per Technical Specification Clause 302.3(for making superelevation)

Construction of Embankment with material obtained from Roadway Cutting/with approved materials deposited at site from roadway as directed by Engineer-in-charge and MORD specifications for Rural Roads 2014 (Filling/Patri Filling)

Construction of coolie walling including supply of all material, labour, T&P etc. required for proper completion of the work as per direction of Engineer-in- charge. (As per PWD Uttarakhand specifications)

Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408. (Using naturally occuring gravel)

WBM Grading 2 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405. By Mechanical Means

WBM Grading 3 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. By Mechanical Means

Prime Coat Low porosity :- Providing and applying primer coat with Bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per Technical Specification Clause 502. (Emulsion used for cold mix)

Tack Coat Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer &cleaned with Hydraulic broom as per Technical Specification Clause 503. (Emulsion used for cold mix)

Providing laying and rolling of cold mixed open -graded primix carpet of 20 mm thickness composed of 13.2 mm to 5.6mm agregates using penetration grade Catonic Bitumen Emulsion (Tailor mace binder ) to required line , grade and level to serve as wearing course on previously prepared base ,including mixing in a suitable plant, lying and rolling with a three wheel 80-100 KN static roller capacity , finished to required level and grades to be followed by seal coat of either Type B as per MORD specification Clause 506.2 (Emulsion used for cold mix)

Providing and Laying seal coat by Bituninous Emulsion (tailor made binder) as binder for sealing the voids in a bituminous surface laid to the specified levels grade and cross fall using Type B as per Technical Specification Clause 508(Emulsion used for cold mix)

Providing and fixing of PMGSY Logo board at end point and every 2 Km, as per attached standard drawing duly painted and writen as per MORD specification and direction by Engineer in charge

Providing fixing of Title Information Board with PMGSY Logo at suitable place in the starting of the road as per standard drawing duly painted and written as directed by Engineer in charge/ as per MORD Specification for Rural Roads 2014.

Providing & fixing of Citizen Information Board with PMGSY Logo at starting or prominent location (where maximum no. of citizens can view the detail of the road) as per standard drawing dully painted and written as directed by Engineer in charge/ as per MORD Specification for Rural Roads 2014.

Providing fixing of Maintenance Information Board with PMGSY Logo at starting or prominent location (Where maximum no.of citizens can view the detail of the road) as per standard drawing duly painted and written as directed by Engineer in charge/as per IRC/MORD Specification for Rural Road 2014.

Semi-Reflective Traffic signs Direction and place identification signs up to 0.9 sqm size board Providing and erecting direction and place identifications of semi reflective sign boards as per IRC:67 made of 2 mm thick M.S. Sheet duly stove enameled paint in white colour in front and grey colour on back with red reflective border of 70 mm width and required message, letters, figures with reflective engineering grade tape as per MORD specifications of required shade and colour. Supported and welded on 47 mm x 47mm of 12 SWG Square tube of 3050 mm height duly strengthened by 25 mm x 5 mm M/s flat iron on edges on back firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and Technical Specification Clause 1701

Maintainance Activities:

Emergency Maintenance

Major Slip Clearance in all Type of Soil ,rock and boulders including cost of all material , machine,T&p etc required for proper compeletion of work as per mord specification of work 1611

Ist Year

Iind Year

IIIrd Year

Ivth Year

Vth Year

Deploying Hydraulic excavator of 0.90cum bucket for clearence of Major slip in all type of soil rock and boulders including its operator ,pol, and all other charges required for proper compeletion of work

Ist Year

Iind Year

IIIrd Year

Ivth Year

Vth Year

Providing and laying of boulder apron laid in wire crate with 4 mm dia GI wire conforming to IS:280 and IS:4826 in 100 mm x 100 mm mesh (woven diagonally) including 10 per cent extra for laps and joints laid with stone boulders weighing not less than 25 kg each as per drawing and techniacal specification 1301

Ist Year

Iind Year

IIIrd Year

Ivth Year

Vth Year

Coolie Walling including supply of all material, labour, T&P,royalty etc. required for proper completion of the work,as directed by Engineer-in-charge and as per PWD specifications 8.90 (For opening communication only)

Ist Year

Iind Year

IIIrd Year

Ivth Year

Vth Year

PBMC Maintenance

Maintenance under PBMC for 1] Trimming of grass and weeds from the shoulders/berms and disposing off the same to suitable locations as per technical specifications Clause 1914. 2] Maintenance of road side Drains including minor slip clearence , reshaping ,deepening and ,regrading ,as well as catch water drains as per technical specification Clause 1907. 3]Maintenance of shoulders to the required level by filling/cutting the soil and its compacting including disposal of the surplus material in approved muck disposal points as per specification clause 1903 . 4] Maintenance of scuppers & Culverts by way of clearing, Cleaning, Erosion repair, repairs to cracks, parapet walls and Protection works as per drawing and technical specification Clasue 1908. 5] Maintenance of Causeway by way of minor Surface repairs, replacing Guide Posts, repair of flood gauges, removal of debris, providing boulders and protection work and painting as per technical specification Clause 1909. 6] Maintenance of road signs by way of cleaning and repainting of mandatory / requlatory / cautionary / informatory and place identifications sign board as per drawings and technical specification Clause 1910. 7] Maintenance of 200 metre km stone by way of refiting of tilted stones repairing with cement mortar, cleaning, repairing and lettering on 200 metre km stone and 5th km stone as per drawing and technical specification Clause 1912. 8} Repairing of pot holes by removal of loose material, trimming of sids, cleaning of surface and providing tack coat bitumen imulsion and patch repair with 20 mm thick premix carpeting and Type B seal coat using bitumen or catonic bitumen imulsion (in 3rd and 5th year). 9] Two coat white washing on parapet walls of CD work ,edge stones, tree truncks, and prominent rock patches on hill sides including preparation of surface by cleaning scraping etc. as per technical specifications Clause 191.

Ist Year

Iind Year

IIIrd Year

Ivth Year

Vth Year