Power Transmission Corporation Of Uttarakhand Limited Tender
View complete overview of Uttarakhand PTCUL Tender
Power Transmission Corporation Of Uttarakhand Limited - PTCUL Tender
Civil Works Others
Eprocure
Opening Date4 Mar 2019
Closing Date2 Apr 2019
Tender Amount₹ 24,77,927
Costs
EMD
₹ 75,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_PTCUX_16773_1Bid Award Id
ViewTender No
556Tender Authority
Power Transmission Corporation Of Uttarakhand Limited ViewPurchaser Address
-Website
http://https://www.ptcul.org
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (All kinds of soil) DSR 2016-2.8.1
60
-
166.4
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, a and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50m: pipes, cables etc, not exceeding 80mm dia.DSR 2016-2.10.1.1
22
-
138.05
... More
Providing & laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level: 1:4:8 (1 Cement: 4 Coarse sand: 8 graded stone aggregate 40 mm nominal size) DSR 2016– 4.1.8
3
-
4478.15
... More
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement-all work up to plinth level: 1:1:5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal side) DSR 2016-ITEM NO. – 5.1.2
2
-
6215.35
... More
Reinforced cement concrete work in walls ( any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement : 1:1:5:3 ( 1 cement : 1.5 coarse sand, 3 grades tone aggregate 20 mm nominal size) DSR 2016-ITEM NO. – 5.2.2
2
-
7145.8
... More
Reinforced cement concrete work in beams suspended doors, roofs having slope up to 15 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1:5:3 ( 1 cement : 1.5 coarse sand : 4 graded stone aggregate 20 mm nominal size) DSR 2016-ITEM NO. – 5.3
2
-
7390.8
... More
Centering and shuttering including strutting propping etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform: DSR 2016-ITEM NO. – 5.9.3
18
-
422.3
... More
Centering and shuttering including strutting propping etc. and removal of form for: Shelves. DSR 2016-ITEM NO. – 5.9.4
16
-
422.3
... More
Centering and shuttering including strutting propping etc. and removal of form for: Lintels, beams, plinth beams girders, bressumers and cantilevers, DSR 2016-ITEM NO. – 5.9.5
4
-
342.9
... More
Centering and shuttering including strutting propping etc. and removal of form for. Weather shade, chajjas, corbels etc. including edges DSR 2016– 5.9.19
31
-
521.75
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. (Mild steel and Medium Tensile steel bars). DSR 2014– 5.22.1
25
-
64.95
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 sqm DSR 2014-8.2.2.2
5
-
3907.4
... More
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work DSR-8.3.2
40
-
245.7
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. (Mild steel and Medium Tensile steel bars). DSR 2014 – 5.22A.1
105
-
64.95
... More
Providing beldar service for 8 hours service in a day or part as per requirement to carry out the works as directed by the Engineer-In-Charge. (DSR 2016 Labour rate Item 0114+ 15%C.P)
20
-
368
... More
Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration. DSR 2016-2.35.3.1
70
-
131.9
... More
Providing & fixing ISI quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in- charge, in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry@ 3.3kg per sqm pigment of matching shaded complete. DSR 2014-11.36
10
-
836.65
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc.,complete.Size of Tile 600x600 mm DSR 2014- 11.41.2
6
-
1405.95
... More
Providing & laying ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS: 15622 of approved make in colours such as white, ivory, grey, fume red brown, laid on 20mm thick cement mortar 1:4 (1cement: 4 coarse sand), including pointing the joints with white cement and matching pigment etc. complete. DSR 2014-11.37
10
-
785.4
... More
Stone tile work for wall lining upto 10m height with special adhesive over 12mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sant) including pointing in white cement with an admixture of pigment to match the stone shade (1) 12mm thick stone textured exterior cladding tiles. (As per market rates)
12
-
1695
... More
Chequerred precast cement concrete tiles 22 mm thick in roof, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Light shade pigment using white cement DSR 2016: 11.20.1
18
-
953.2
... More
Providing gola 75x75mm in cement concrete 1:2:4. ( 1 cement : 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1cement: 3 fine sand) as per standard design. (in 75x75mm deep chase) DSR 2016-12.21.1
65
-
153
... More
15mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1cement: 6 coarse sand) DSR 2016 – 13.5.2
35
-
194.6
... More
6mm cement plaster 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement and thick coat of lime wash on top of walls when dry for bearing of R.C.C. slabs and beams DSR 2016 – 13.17
50
-
192.85
... More
Neal cement punning DSR 2016 – 13.18
65
-
42.6
... More
Brick work with common burnt clay F.P.S. (Non modular) bricks of class designation 7.5 in foundation and plinth in: cement mortar 1:6 (1 cement: 6 coarse sand DSR 2016 – 6.1.2
3
-
4677.25
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sized in: cement mortar 1:6 (1 cement: 6 coarse sand) DSR 2014– 6.4.2
3
-
5426.15
... More
Half brick masonry with common brunt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement : 4 coarse sand) DSR 2016– 6.13.2
18
-
684.2
... More
Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead with cement mortar 1:4 (1cement : 4 coarse sand) DSR 2016– 14.1.2
45
-
274.8
... More
Providing & fixing 18mm thick gang saw cut mirror polished remolded and prepolished) machine cut for kitchen platforms, vanity counters, window sills, fables and similar locations of required size of approved shade, colour and texture laid over 20mm base cement mortar 1:4 (1cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels. Raj nagar plain white marble/Udaipur green marble/zebra black marble. Area of slab upto 0.50 sqm. DSR 2014– 8.2.1.1
5
-
2341.55
... More
Providing edge moulding to 18 mm thick marble stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by engineer-in-charge (marble work) DSR 2016– 8.3.1
10
-
144.7
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand: 4 grad stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate. DSR 2016-11.3.1
85
-
362.6
... More
Providing and fixing glass strips in joints of terrazzo/cement concrete floors. (40 mm wide and 4mm thick) DSR 2016– 11.13.1
50
-
52.5
... More
Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering including disposal of rubbish to the dumping ground within 50 meter lead.DSR 2016-14.17
90
-
29.65
... More
Flush pointing with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for flat tile bricks on top of mud phaska. With F.P.S. brick tiles. DSR 2016-14.18.1
50
-
62.95
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. : For fixed portion: Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) DSR- 21.1.1.1
30
-
355.2
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. : For shutters of doors, windows & ventilators includingv providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) DSR-21.1.2.1
17
-
415.05
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness DSR- 21.3.2
8
-
1003.95
... More
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, hold/fasts etc. complete and stacking within 50 meters lead : of area 3 sq. meters and below (Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead Of area 3 sq. metres and below DSR 2016– 15.12.1
64
-
157.85
... More
Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868)transparent or dyed to required colour and shade with necessary screws etc. complete. Double rubber stopper DSR 2016-9.101.2
90
-
38
... More
2nd class teak wood lipping / moulded beading or Taj beading of size 18 X 5 mm DSR 2016 code-8719
320
-
35
... More
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10 mm DSR 2016-9.74.1
45
-
280.7
... More
Providing and fixing bright finished brass door latch with necessary screws etc. complete : 300x16x5 mm DSR-9.75.1
20
-
200.6
... More
Providing and fixing bright finished brass parliamentary hinges with necessary screws etc. complete :150x125x27x5 mm DSR 2016-9.73.1
40
-
326.25
... More
Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose.(2) The payment will be made once only for execution of all items for such works.DSR 2016-24.2
65
-
160.1
... More
Providing wood work in frames of doors, windows, clerestory, windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) (sal wood) DSR 2016– 9.1.2
0.45
-
85386.95
... More
Providing & fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws second class teak wood (35 ,, thick) DSR 2014– 9.9.1.1
9
-
3262.9
... More
Refixing old glass panes with putty and nails DSR 2016-14.10
94
-
330.75
... More
Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : 20 mm dia (heavy type) DSR 2016-9.47.1
150
-
119.25
... More
Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.80 mm thick with zinc coating not less than 275 gm/m² DSR 2014-12.1.2
39
-
875.45
... More
Providing Carpenter Service for 8 hours service in a day or part as per requirement by experienced Carpenter with necessary T& P for attending minor type of repairing work as directed by the Engineer-In- Charge.(DSR 2016 Labour rate Item 0111+ 15%C.P)
30
-
487
... More
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge With stainless steel cover plate minimum 1.25 mm thickness. DSR 2016-21.4.1
9
-
2054.4
... More
Providing & fixing 25mm thick shutters for cup board etc. paneled or paneled & glazed shutters second class teak wood including ISI marked anodized aluminum butt hinges with necessary screws. DSR 2014– 9.16.1.1
11
-
2760.25
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws DSR-9.20.1
12
-
2488.95
... More
Providing and fixing ISI marked flush door shutters conforming to IS:2202(part I) non-decorative type, core of block bard construction with frame of 1st class hard wood and well matched commercial 3ply veneering with vertical grains or cross bands and face veneers on both faces of shutters; (35 mm thick including ISI marked stainless steel butt hinges with necessary screws.) DSR 2014– 9.21.1
14
-
1909.55
... More
Providing and fixing ISI marked flush door shutters conforming to IS:2202 (part I) non-decorative type, core of block bard construction with frame of 1st class hard wood and well matched commercial 3ply veneering with vertical grains or cross bands and face veneers on both faces of shutters; (25 mm thick including ISI marked stainless steel butt hinges with necessary screws.) DSR 2016– 9.21.3
10
-
1559.75
... More
Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15x10x10 cm with cement concrete 1:3:6 ( 1 cement : 3 coarse sand: 6 graded stone aggregate 20mm nominal size). Painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground with 50 meters lead: Door chowkhats DSR 2016– 14.2.1
15
-
852.7
... More
Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts. Embedding hold fasts in cement concrete blocks of size 15x10x10 cm with cement concrete 1:3:6 ( 1cement : 3 coarse sand: 6 graded stone aggregate 20 mm nominal sizes), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete including disposal of rubbish to the dumping ground within 50meters lead: Window chowkhats DSR 2016– 14.2.2
24
-
529.5
... More
Providing & fixing 35mm thick wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4mm in both directions with wire of dia. 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws: with ISI marked M.S. pressed butt hinges bright finished of required size (second class teak wood). DSR 2014– 9.27.1.1.1
9
-
3063.05
... More
Providing and fixing expandable fasteners of specified size with necessary plastic sleeves and galvanized M.S. screws including drilling holes in masonry work /CC/R.C.C. and making good etc. complete. (40mm long) DSR 2016– 9.33.3
18
-
21.5
... More
Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood (50x12mm) DSR 2016– 9.40.1.1
19
-
119.65
... More
Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete. 2nd glass teak wood (50x20mm) DSR 2016– 9.40.1.2
20
-
154.75
... More
Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets: 20 mm dia (Heavy type) DSR 2014 – 9.47.1
10
-
126.6
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flames square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings/Wooden frames with rawl plugs crews etc. DSR 2014– 9.48.2
10
-
116.9
... More
Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using galvanized M.S. wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm all complete with. DSR 2nd class teak wood beading 62x19mm No: DSR 2014– 9.51.1
10
-
861.65
... More
Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using galvanized M.S. wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm all complete with 12 mm mild steel U beading. DSR 2016– 9.51.2
22
-
597
... More
Providing 40x5 mm flat iron hold fast 40cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15 cm 1:3:6 mix x( 1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). DSR 2016– 9.53
40
-
118.6
... More
Providing and fixing ISI marked oxidized M.S. pressed butt hinges with necessary screws etc. complete : (100x58x1.90mm) DSR 2016– 9.57.2
42
-
28
... More
Providing and fixing ISI marked oxidized M.S. sliding door bolts with nuts and screws etc. complete: (300x16mm) DSR 2014– 9.62.1
25
-
173.2
... More
Providing & fixing ISI marked oxidized M.S. sliding doors bolts with nuts and screws etc. complete: (250x16mm) DSR 2014– 9.62.2
30
-
166.2
... More
Providing & fixing ISI marked oxidized M.S. tower bolts black finish, (Barrel type) with necessary screws etc. complete (250x10mm) DSR 2014– 9.63.1
45
-
66.95
... More
Providing and fixing ISI marked oxidised M.S. door latches conforming to IS: 5930 with screws etc. complete: 250x20x6mm DSR 2014– 9.65.2
60
-
60.3
... More
Providing & fixing ISI marked oxidised M.S. handles conforming to IS: 4992 with necessary screws etc. complete : 125mm DSR 2014– 9.66.1
70
-
28.9
... More
Providing & fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete. 250mm weighing not less than 150 gms. DSR 2014– 9.68.2
45
-
32.7
... More
Providing & fixing aluminum hanging floor door stopper ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required color and shade with necessary screws etc. Complete. Single rubber stopper DSR 2014– 9.101.1
175
-
37.5
... More
Structural steel work riveted bolted or welded in built up sections, trusses and framed work, including cutting, hosting, fixing in position and applying a priming coat of approved steel primer all complete; DSR 2014– 10.2
40
-
73.95
... More
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer, using flats 30x6mm for diagonal braces and central cross piece DSR 2014– 10.5.2
3
-
2906.65
... More
24mm thick factory made PVC door shutters made of styles and rails of a UPVC hollow section of size 59x24mm and wall thickness 2mm (+-0.2mm) with inbuilt edging on both sides) the styles and rails mitered and joint at the corners by means of M.S. galvanized/plastic brackets of size 75x220mm having wall thickness 1.0mm and stainless steel screws the styles of the shutter reinforced by inserting galvanized M.S. tube of size 20x20 mm and 1mm ( +-0.1mm) wall thickness. The lock rail made up of ‘H’ section a uPVC hollow section of size 100x24 mm and 2mm (+-0.2mm) wall thickness, fixed to the shutter styles by means of plastic/galvanized M.S. ‘U’ cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20mm and 1mm (+-0.1mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6mm galvanized M.S. rod and fastened with nuts and washers, complete as per manufacture’s specification and direction of engineer in charge. (for W.C. and bathroom door shutter). DSR 2014– 9.118.1
8
-
2718.6
... More
Hermetically sealed double glazed unit made with 6 mm thick clear float glass both side having 12 mm air gap DSR 2016-8648
11
-
2108
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. DSR 2016-17.31
12
-
817.95
... More
Float glass sheet of nominal thickness 5.5 mm (weight not less than 13.50 kg/sqm) DSR 2016 -2407
35
-
490
... More
Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire 9.38 kg per 100 m (minimum) between the two posts fitted and fixed and fixed with G.I. staples, turn buckles etc. complete. (cost of posts, struts, earth work and concrete work to be paid for separately): payment to be made per meter cost of total length of barbed wire used with G.I. barbed fencing DSR 2016-16.18.1
190
-
12.65
... More
Easing door and windows including supply of all labour T&P etc. required for proper completion of the work (PTCUL Schedule Rate 2016 Item no. 135)
65
-
68
... More
Supply and laying chicken mesh of (20mm) hexagonal heavy quality over roofs of joints as per direction of E/l including supply all material, labour and T&P etc. required for proper completion of the work (PTCUL Schedule Rate 2016 Item no. 136)
45
-
87
... More
Supply and fixing of 22 gauge aluminum sheet of approved quality cutting wastage and fixing the same over wooden door shutters by nails including cost of all material, labour, and T&P etc. required for proper completion of work. (PTCUL Schedule Rate 2016 Item no. 137)
20
-
876
... More
Providing and applying plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. DSR 2016-13.26
105
-
118.7
... More
Distempering with 1st quality acrylic washable distemper (ready mixed) of approved manufacturer of required shade and colour complete, as per manufacturer’s specification. Two or more coats on new work DSR 2016-13.42.1
310
-
53.15
... More
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. Water thinnable cement primer DSR 2016-13.43.1
310
-
36.95
... More
Finishing walls with water proofing cement paint of required shade new work (two or more coats applied @3.84kg/10sqm) DSR 2016-13.44.1
250
-
58.8
... More
Applying priming coat with ready mixed pink of grey primer of approved brand and manufacture wood work (hard and soft) DSR 2016-: 13.50.1
105
-
34.95
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture DSR 2016-13.61.1
125
-
78.4
... More
Renewing glass panes, with putty and nails wherever necessary including racking out the old putty; float glass panes of thickness 4mm DSR 2014– 14.5.1
20
-
690.7
... More
Renewal of old putty of glass panes (length) DSR 2016– 14.9
155
-
25.45
... More
Lettering with black Japan paint of approved brand and manufacture DSR 2016- 13.71
2450
-
2.7
... More
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete DSR 2016-14.46
520
-
10.8
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. One or more coats on old work. DSR 2016-14.54.1
90
-
51.3
... More
Finishing walls with water proofing cement paint of required shade. Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat. DSR 2016- 14.64.1
80
-
55.7
... More
Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm DSR 2016-13.45.1
195
-
150.65
... More
Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm) DSR 2016-13.44.1
90
-
58.8
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. Pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe, with manually controlled device (handle lever), conforming to IS: 7231 with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid DSR 2016– 17. 2.1
11
-
3418.7
... More
Providing & fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required. One urinal basin with 5 litre white P.V.C. automatic flushing cistern. DSR 2016– 17.4.1)
2
-
3494.15
... More
Providing and fixing wash basin with C.I. brackets 15mm C.P. bras pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets cutting and making good the walls wherever require: white vitreous china flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap DSR 2016– 17.7.4
14
-
1817.35
... More
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer DSR 2016- 17.7A
3
-
2984.2
... More
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.DSR 2016-17.8
3
-
975.25
... More
Providing and fixing stainless steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls, wherever required: kitchen sink without drain board 610x550 mm bowl depth 200mm. DSR 2014-17.10.2.1
1
-
4343.45
... More
Providing and fixing white vitreous china water close squatting pan (Indian type) Orissa pattern W.C. pan of size 580x440mm DSR 2016– 17.13.2
10
-
1456.6
... More
Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm DSR 2016-14.80.2
14
-
2127.85
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. Pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe, with manually controlled device (handle lever), conforming to IS: 7231 with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. Pan with ISI marked black solid plastic seat and lid DSR-ITEM NO. – 17. 2.2
4
-
3395.45
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal outer dia Pipes DSR 2016-18.8.1
60
-
270
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes DSR 2016-18.8.2
65
-
296.4
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal outer dia Pipes DSR 2016-18.8.3
55
-
351.3
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 15 mm dia nominal bore DSR 2016-18.10.1
60
-
215.1
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 20 mm dia nominal bore DSR 2016-18.10.2
65
-
249.3
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 25 mm dia nominal bore DSR 2016-18.10.3
55
-
304.15
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore DSR 2016-18.17.1
10
-
428.85
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :15 mm nominal bore each DSR 2016-18.18.1
20
-
287.25
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :20 mm nominal bore DSR 2016-18.18.2
20
-
327.05
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :25 mm nominal bore DSR 2016-18.18.3
15
-
449.95
... More
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter DSR 2016-18.22.1
20
-
71.65
... More
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter DSR 2016-18.22.2
10
-
85.9
... More
H.P. or L.P. ball valve with polythene floats: 15 mm dia DSR code-1922
6
-
190
... More
Providing & fixing CP brass pillar cock of approved quality 15mm nominal bore (weight not less then 400 gm) (PTCUL Schedule Rate 2016 Item no. 173)
10
-
688
... More
Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) DSR 2016-14.75A
28000
-
0.2
... More
Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge.DSR 2016-14.76
35
-
47.55
... More
Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm dia for all depth.DSR 2016-14.77
90
-
217.8
... More
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.DSR code-18.65
11
-
164.95
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls , wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm DSR 2016-17.10.1.1
4
-
4120.8
... More
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade DSR 2016-8.10.2
11
-
2942.05
... More
Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete DSR 2016-17.33
30
-
573.3
... More
PTMT - Towel Rail (600 mm) DSR 2016 code-7506
11
-
226
... More
600x120 mm glass shelf with anodised aluminium angle frame, C.P. brass brackets and guard rail of standard size DSR 2016: 3228
12
-
250
... More
Providing fitter for Plumber service for 8 hours service in a day or part as per requirement by experienced Plumber with necessary Kit for attending minor type of all water supply defects as directed by the Engineer-in- Charge. (DSR 2016 Labour rate Item 0116 + 15%C.P)
20
-
487
... More
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231 with all fittings and fixtures complete. 10 liter capacity-White DSR 2014– 17.18.1
10
-
865.05
... More
Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : Flat back wash basin of size 630x450 mm DSR 2014– 17.25.1
12
-
969.3
... More
Providing & fixing white vitreous china wash basin including making all connections but excluding the cost of fittings: Flat back wash basin of size 550x400 mm DSR 2014–17.25.2
10
-
769.7
... More
Providing and fixing PTMT Waste Coupling for wash basin and sink,of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms DSR 2016-17.69.1
30
-
82.55
... More
Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour.Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms DSR 2016-17.69.2
45
-
98.8
... More
Providing & fixing P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete flexible pipe 32mm dia. DSR 2014– 17.28.2.1
50
-
74.45
... More
Providing & fixing 600x450mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete DSR 2016– 17.31
38
-
817.95
... More
Providing and fixing chlorinated polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge, 15 mm nominal outer dia pipes DSR 2014-18.7.1
5
-
163.5
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter DSR 2016- 12.41.1
162
-
148.75
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter DSR 2016- 12.41.2
65
-
236.35
... More
Providing & fixing G.I. pipes complete with G.I. fittings and clamps including cutting and making good the walls etc. internal work-exposed on wall. 25mm dia. Nominal bore) DSR 2014– 18.10.3
60
-
304.15
... More
Providing & fixing G.I. pipes complete with G.I. fittings and clamps including cutting and making good the walls etc. internal work-exposed on wall. 32mm dia. Nominal bore) DSR 2014– 18.10.4
65
-
343.2
... More
Providing & fixing G.I. pipes complete with G.I. fittings and clamps including cutting and making good the walls etc. internal work-exposed on wall. 40 mm dia. Nominal bore) DSR 2014– 18.10.5
45
-
425.65
... More
Providing & fixing G.I. pipes complete with G.I. fittings and clamps including cutting and making good the walls etc. internal work-exposed on wall. 50mm dia. Nominal bore) DSR 2014– 18.10.6
34
-
527.2
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.External work 80 mm dia nominal bore DSR 2014– 18.12.8
42
-
637.05
... More
Providing & fixing G.I. pipes complete with G.I. fittings including trenching & refilling etc. external work 15mm dia. Nominal bore) DSR 2014– 18.12.1
22
-
186.25
... More
Providing & fixing G.I. pipes complete with G.I. fittings including trenching & refilling etc. external work 20mm dia. Nominal bore) DSR 2014– 18.12.2
25
-
209.95
... More
Providing & fixing G.I. pipes complete with G.I. fittings including trenching & refilling etc. external work 25mm dia. Nominal bore) DSR 2014– 18.12.3
8
-
257.3
... More
Providing & fixing G.I. pipes complete with G.I. fittings including trenching & refilling etc. external work 32mm dia. Nominal bore) DSR 2014– 18.12.4
10
-
281.05
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee including cutting and threading the pipe etc. complete: 25 to 40 mm nominal bore. DSR 2016– 18.13.1
8
-
394.15
... More
Providing and fixing unplasticised PVC connection pipe with brass unions 45cm length: 15mm nominal bore DSR 2014– 18.21.2.1
20
-
68.6
... More
Providing & fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) 100mm diameter. Class I DSR 2016-18.31.1.1
2
-
3317.55
... More
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 15 mm nominal bore DSR 2016-18.46.1
22
-
147.75
... More
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 20 mm nominal bore DSR 2016-18.46.2
20
-
170.95
... More
Providing and fixing G.I. Union in G.I. Pipe including cutting and threading the pipe and making long screws etc. : 25mm nominal bore. DSR 2016– 18.46.3
18
-
205.8
... More
Providing and fixing G.I. Union in G.I. Pipe including cutting and threading the pipe and making long screws etc. : 32mm nominal bore. DSR 2016 – 18.46.4
20
-
240.65
... More
Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 15 mm nominal bore DSR 2016-18.47.1
33
-
366.2
... More
Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 20 mm nominal bore DSR 2016-18.47.2
28
-
389.45
... More
Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 25 mm nominal bore DSR 2016-18.47.3
25
-
424.3
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank , ISI 12701 marked with cover and suitable locking. Arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.Circular tank/Rectangular tank DSR 2016 – 18.48 A/B
980
-
7.25
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15 mm nominal bore DSR 2016-18.49.1
40
-
371.7
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore each DSR 2016- 18.53.1
32
-
475.7
... More
Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms DSR 2016-17.70.1
28
-
293.95
... More
Providing and fixing brass bib cock of approved quality :15 mm nominal bore DSR 2016-18.15.1
25
-
260.1
... More
Providing and fixing brass stop cock of approved quality :15 mm nominal bore DSR 2016-18.16.1
33
-
260.1
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 a) 15mm nominal bore DSR 2014– 18.53.1
15
-
507.7
... More
Constructing brick masonry chamber for underground C.I. inspection.Chamber and bends with bricks in cement mortar 1:4 ( cement sand) C.I. cover with frame (light duty) 456x610mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg. and weight of frame 15kg), R.C.C. top slab with 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement: 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design inside dimensions 455x610 mm and 45 cm deep for single pipe line: with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 DSR 2016-19.30.1.1
2
-
4777.35
... More
Making soak pit 2.50m diameter 3.0 meter deep with 45x45 cm dry honey cob shaft with bricks and S.W. drain pipe 100 mm diameter and 1.80m long complete as per standard design with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 DSR 2016-19.32.1
1
-
20681.55
... More
Providing and laying four course water proofing treatment with bitumen felt over roofs consisting of first and third curses of blown bitumen 85/25 or 90/15 conforming to IS: 702 applied hot@ 1.45kg per square meter of area for each course second course of roofing felt type 3 grade-I (Hessian based self finished bitumen felt) and fourth and final course of stone grit 6mm. and down size or pea-sized gravel sprayed at 6 cubic diameter per square meter including preparation of surface but excluding grading complete with: Bitumen felt (Hessian base) type 3 grade conforming to IS: 1322 DSR 2014-22.8.1
25
-
356.05
... More
Grading roof for water proofing treatment with: cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) DSR 2016-22.14.1
5
-
5583.8
... More
Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. DSR 2016-14.23
20
-
104.3
... More
cleaning of inspection chamber including disposal of waste outside the corporation area as per direction of E/I including cartage,labour and T&P.( chamber below 1.00 cum) (PTCUL Schedule Rate 2016 Item no. 174)
125
-
153
... More
Cleaning of septic tank by removal of sludge through sludge pump attached with tractor including disposal of waist outside the corporation area as per direction of E/I including cartage,labour and T&P. (capacity 1 cum to 4 cum )(PTCUL Schedule Rate 2016 Item no. 139)
10
-
5060
... More
supply of drinking water (500 Liter Water Tank) at Substation From source of Municipal Water supply including all T&P,Labour as required for proper completion of work.(PTCUL Schedule Rate 2016 Item no. 142)
12
-
1150
... More
cleaning of drains upto 0.30m wide and disposal of debris/garbage uptonearest dustbin including sprinkling of lime powder near drain as per schedule approved by E/I including all labour,material and T&P etc. required for proper completion of work (approximate length of drains 1200 RM) (PTCUL Schedule Rate 2016 Item no. 107)
13000
-
1.6
... More
Cleaning of nala more that 0.30m wide and disposal of debris/garbage uptonearest dustbin including sprinkling of lime powder near nala as per schedule approved by E/I including all labour, material and T&P etc.required for proper completion of work .(approximate length of nala 315 RM ) (PTCUL Schedule Rate 2016 Item no. 112)
1450
-
8
... More
Cleaning of overhead tank capacity upto 1000 Liter. With brush, scraping of wall and bottom, and disposal of rubbish outside the tank including all labour and T&P etc. required for proper completion of work. (PTCUL Schedule Rate 2016 Item no. 116)
50
-
164
... More
Cleaning of overhead tank capacity ranging from 100000Ltrs. With brush, scraping of wall and bottom, and disposal of rubbish outside the tank including all labour and T&P etc. required for proper completion of work.(PTCUL Schedule Rate 2016 Item no. 113)
3
-
1345
... More
Point wiring in PVC conduit with piano type switch, wiring for light point, fan point/ exhaust fan point/ call bell point with 1.5 sq mm. FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq mm. FR PVC insulated copper conductor single core cable etc. as required Group B. DSR.E&M 2016-1.8.2
25
-
571
... More
Rewiring for light point/fan point/exhaust fan pint/call bell point with 1.5sq mm. FR PVC insulated copper conductor single core cable and 1.5 sqmm FR PVC insulated copper conductor single core cable as earth wire in existing surface/recessed steel/PVC conduit including dismantling as required Group B (DSR.2016 ELEC-1.15.2)
75
-
303
... More
Power plug wiring in PVC conduit (2x4 sq.mm) wiring for light/power plug with 2x4 sq mm. FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, along with 1no. 4 sq mm. FR PVC insulated copper conductor single core cable for loop earthing as required DSR E&M 2016-1.12
25
-
168
... More
Wiring for circuit/sub main wiring along with earth wire with the following sizes of PVC insulated copper conductor single core cable in surface/recessed P?VC conduit as required 2x1.5 sq. mm +1x1.5sqmm earth wire DSR.E&M 2016-1.14.1
75
-
112
... More
Wiring for circuit/sub main wiring along with earth wire with the following sizes of PVC insulated copper conductor single core cable in surface/recessed P?VC conduit as required 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire DSR.E&M 2016-1.14.2
70
-
137
... More
Supplying and Fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in existing MCB DB complete connections, testing and commissioning etc. as required. Single pole.DSR.ELEC 2016 - 2.10.1
40
-
173
... More
Supplying and Fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in existing MCB DB complete connections, testing and commissioning etc. as required.Single pole and neutral DSR.ELEC 2016 - 2.10.2
45
-
445
... More
Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required DSR.ELEC - 1.25
19
-
288
... More
Supplying and fixing metal box of 150 mm X 75 mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required. DSR E&M-1.29
35
-
205
... More
Supplying and fixing metal box of 180 mm X 100 mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 A & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required. DSR E&M 2016-1.30
30
-
287
... More
Supplying and drawing following sizes of FR PVC insulated copper conductor single core cable in the existing surface/recessed steel/PVC conduit as required 1 x 1.5 sq. mm DSR E&M 2016-1.17.1
544
-
23
... More
Supplying and drawing following sizes of FR PVC insulated copper conductor single core cable in the existing surface /recessed steel/PVC conduit as required 2 x 1.5 sq. mm DSR E&M 2016-1.17.2
600
-
37
... More
Supplying and drawing following sizes of FR PVC insulated copper conductor single core cable in the existing surface/recessed steel/PVC conduit as required 2 x 2.5 sq. mm DSR E&M 2016-1.17.11
480
-
53
... More
Supplying and drawing following sizes of FR PVC insulated copper conductor single core cable in the existing surface/recessed steel/PVC conduit as required 2 x 4 sq. mm DSR E&M 2016-1.17.20
285
-
79
... More
Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 5/6 A switch DSR E&M 2016-1.23.1
175
-
34
... More
Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 2 way 5/6 A switch DSR E&M 2016-1.23.2
75
-
39
... More
Rewinding of burnt celling fan with approved copper wire including cost of all material, labour, T&P,etc. complete (Burnt wire shall not be taken back from the contractor) (PTCUL Schedule Rate 2016 Item no. 127)
28
-
621
... More
Supply and replacing of Damage bearing of ceiling fan. Including cost all T&P and labour etc. for completion of work. (PTCUL Schedule Rate 2016 Item no. 128)
9
-
305
... More
Taking off the defective ceiling fan from position and rehanging after receiving the repaired fan and proper connection etc (PTCUL Schedule Rate 2016 Item no. 129)
58
-
116
... More
Supply and replacing of 16 A 240 V. cutout of approved make on board including all material and labour etc. required for proper completion of work(PTCUL Schedule Rate 2016 Item no. 130)
30
-
161
... More
Supply and replacing of 32 A 240 V. cutout of approved make on board including all material and labour etc. required for proper completion of work (PTCUL Schedule Rate 2016 Item no. 131)
30
-
213
... More
supply and replacing of wooden board of 8"x10" size approved make on board including supply all material, labour, T&P and polishing etc required for proper completion of work (PTCUL Schedule Rate 2016 Item no. 132)
60
-
121
... More
supply and replacing of wooden board of 4"x7" size approved make on board including supply all material, labour, T&P and polishing etc required for proper completion of work (PTCUL Schedule Rate 2016 Item no. 133)
120
-
103
... More
Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 15/16 A switch DSR E&M 2016-1.23.3
90
-
75
... More
Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 3 pin 5/6 A socket outlet DSR E&M 2016-1.23.4
125
-
42
... More
Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 6 pin 15/16 A socket outlet DSR E&M 2016-1.23.5
90
-
86
... More
Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. Telephone socket outlet DSR E&M 2016-1.23.6
50
-
55
... More
Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. TV antenna socket outlet DSR E&M 2016-1.23.7
50
-
48
... More
Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. Bell push DSR E&M 2016-1.23.8
70
-
47
... More
Supply, installation, testing & commissioning of 1X40 watt fluorescent tube light fitting of super strip "Havells" make with requisite accessories like copper ballast starter, tube etc. including supply of all materials labour T&P etc. required for proper completion of work. (PTCUL Schedule Rate 2016 Item no. 1)
15
-
551
... More
Supply, installation, testing & commissioning of Ceiling fan "Havells" make ES-50 5 tar rating model fan sweep 1200 mm. including wiring the down roads of standerd length (up to 30 cm with 1.5 sqmm FR PVC insulated copper conductor single core cable, including providing & fixing phonolic laminated sheet cover on the fan box etc. as required. (PTCUL Schedule Rate 2016 Item no. 2)
15
-
1529
... More
Dismantling of ceiling fan and painting the same with with one or more coats of spray painting with synthetic enamel paint of approved brand and manufacture to give an even shade, including cleaning of surface with detergent and replacing the damaged rubber reel, nuts and bolts with washers and safety pins, reinstalling the same as required. DSR E&M 2016-1.59
65
-
133
... More
Providing Wireman service for 8 hour‟s service in a day or part as per requirement by experienced electrician with necessary Kit (holding license and T& PaisaP) for attending all type of electrical defects as directed by the Engineer-in-Charge.(DSR Elec.Labour rate Item Elec.1001+15%C.P)
20
-
447
... More
Hiring charges of welding machine for 8 hours per day including all T&P, labour as required for proper complection of work (PTCUL Schedule Rate 2016 Item no. 141)
10
-
1133
... More
Supplying and fixing piano type socket on the existing switch box/cover including connections etc. as required 3 pin 5/6 amp socket outlet DSR.E&M 2016-1.23.4
70
-
42
... More
Supplying and fixing 3 pin 5 amps celling rows on the existing junction box/wooden block including connection etc. as required. DSR E&M-1.33
30
-
46
... More
Supplying and fixing brass batten/ angle holder including connection etc. as reqruied DSR E&M 2016-1.34
50
-
75
... More
Installation testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable etc. as required DSR.E&M 2016-1.44
50
-
105
... More
Installation testing and commissioning of resistance type ceiling fan regulator, in existing switch box including connection with 1.5sq. mm FR PVC insulated, copper conductor, earthing the regulator etc. as required DSR E&M 2014-1.46
20
-
52
... More
Supplying and fixing 2+4way/6way, double door single pole and neutral sheet steel, MCB distribution board, 240 volts, on surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required . (But without MCB/RCCB/Isolator) DSR E&M 2014-2.3.5
10
-
923
... More
Supplying and fixing modular type switch on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (15/16 amp switch) (DSR. ELEC-1.24.3)
10
-
111
... More
Supplying and fixing modular type socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required (6pin 15/16 amp socket outlet) (DSR. ELEC-1.24.5)
10
-
150
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.
-
-
-
... More
1 or 2 Module (75 mmX75 mm) DSR Ele-1.27.1
3
-
175
... More
3 Module (100 mmX75 mm) DSR Ele-1.27.2
5
-
185
... More
4 Module (125 mmX75 mm) DSR Ele-1.27.3
2
-
205
... More
6 Module (200 mmX75 mm) DSR Ele-1.27.4
3
-
258
... More
8 Module (125 mmX125 mm) DSR Ele-1.27.5
3
-
297
... More
12 Module (200 mmX150 mm) DSR Ele-1.27.6
1
-
344
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
... More
5/6 A switch DSR Ele-1.24.1
12
-
84
... More
2 way 5/6 A switch DSR Ele-1.24.2
2
-
99
... More
15/16 A switch DSR Ele-1.24.3
3
-
114
... More
3 pin 5/6 A socket outlet DSR Ele-1.24.4
3
-
81
... More
Bell push DSR Ele-1.24.8
3
-
114
... More
Supplying and fixing following rating, double pole, 240 volts, isolator in existing MCB DB complete with connection, testing and commissioning etc as required 40 amps DSR E&M 2016-2.12.1
10
-
222
... More
Supplying and fixing following rating, double pole, 240 volts, isolator in existing MCB DB complete with connection, testing and commissioning etc as required 63 amps DSR E&M 2016-2.12.2
5
-
254
... More
Supplying, installing, testing and commissioning of following capacity TPN tap off box made of 1.6 mm thick sheet steel enclosure duly painted with powder coating on existing rising mains complete with TPN disconnector FSU and HRC fuses, connection, earthing etc as required. 100 amps. TPN DSR E&M 2016-3.2.4
1
-
8067
... More
Supply and replacing of 15mm dia tee/ socket/ elbow/ bend/ nipple etc for repair for pipe line complete. Including supply of all material, labour and T&P etc. required for proper completion of the work (PTCUL Schedule Rate 2016 Item no. 134)
11
-
43
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.. DSR 2016-12.41.2
30
-
236.35
... More
Hiring charges of JSB/Crane for 1 hours. Per day including all T&P, labour as required for proper complection of work. (PTCUL Schedule Rate 2016 Item no. 143)
6
-
1336
... More
Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil DSR 2016-2.28.1
850
-
13.95
... More
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.DSR 2016- 2.31
750
-
7.2
... More
Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. DSR 2016-2.32
300
-
3.65
... More
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge: All kinds of soil sqm DSR 2016-2.1.1
108
-
53
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements