Police Department Tender

Diamond Chain Saw Specifications: - 1. Diamond chain saw suitable for cutting reinforced concrete at least 300 mm thickness and with built in reinforcement up to 12 mm dia. Masonry bricks, natural stone or other similar Material. 2. Engine 2 stroke petrol driven air cooled power shall be not less than 5 H.P. 3.The starter shall be shielded from the dust & water. It shall have electronic ignition protected from water and single spring clutch proofed from water and concrete. 4. Fuel capacity: Min 0.7 litre. 5. It shall be fitted with diamond chain, which run over the 16” guide bar. 6. The water supply required by the chain while cutting shall not exceed 10lts/Min for cool & lubricate the chain and prevent concrete cutting dust. 7. The chain saw shall also be provided with measures/Attachment for reducing the force required during cutting operation in order to reduce fatigue on operator. 8. It shall also be provided with foam/cushion covered full wrap handles, momentary contract on off switch, water pressure gauge, 360 degree swivel hose connector, sprocket side cover and guard flap for operator safety. 9. Weight: Not more than 12 kgs. 10. Cutting rate: 10 to 25” per min or more. 11. Noise level : Less than 110 dB @ 1 meter ACCESSORIES:- 1. A spare diamond chain. 2. A min. 10 litre pressurized water container can capable to supply water to the equipment. 3. Heavy duty packaging box.