Pey Jal Nigam Uttarakhand Tender

P/L cement concrete excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)

P/L reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete

Reinforcement for R.C.C. Work Using T.M.T. Bars

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position all complete.

G.I. chain link fabric fencing with G.I. wire of dia 4 mm

12mm thick C.P. in C.M. 1 : 6 ( 1 cement : 6 fine sand )

Applying priming coat on steel work.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade

Painting Steel work with Deluxe Multi Surface Paint to give an even shade.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

Upto 35 sq. mm

Above 185 sq. mm and upto 400 sq. mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

3½ x 400 Sq.mm. (70mm).

4X 25 Sq. mm. (28 mm) (For pumps etc)

4X 35 sqmm (32 mm) (For pumps etc)

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm G.I earhting strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

(DG SET) 1 Nos. 320 KVA

Providing, Installing, Testing and Commissioning of'Silent Type' Diesel Generating set having Prime Power Rating of 320 KVA, 415 volts, 50 Hz at 1500 RPM, 0.8 lagging power factor , three phase system & for 0.85 Load Factor with standard control panel andcopper control cable from DG to AMF Panel and consisting of the followings: a) Diesel Engine: Diesel engine 4 Stroke Water Cooled, electric start, of suitable BHP at 1500 RPM suitable for above output of alternator at 40 Degree C, 50%RH & at 1000 Meter MSL and conforming to BS 5514,BS 649, IS 10000, capable of taking 10% over loading for one hour after 12 hours of continuous operation. The engine will be fitted complete with all the required accessories.

b) Engine mounted Instrument Panel fitted with and having digital display for following: i) Start-stop switch with key ii) Water temperature indication iii) Lubrication oil pressure indication iv) Battery charging indication v) RPM indication vi) Over speed indication vii) Low lub. Oil trip indication viii) Engine Hours indication

c) Alternator: Synchronous alternator rated at 256 KVA, 415 volts at 1500 RPM, three phase 50 Hz, AC supply with 0.8 lagging power factor at 40 Degree C,50% RH & at 1000 Meter MSL. The alternator shall be having SPDP enclosure, brushless, continuous duty, self-excited and self-regulated through AVR conforming to IS: 4722/BS 2613 suitable for tropical conditions and with c1ass-F/H insulation.

d) Base Frame & Foundation: Both the engine and alternator shall be mounted on suitable base frame made of M.S Channel with necessary reinforcement which shall be installed on suitable cement concrete foundation and vibration isolation arrangement as per recommendations of manufacturer.

acoustic enclosure with self contained hoses and other allied accessories as per specifications or as per OEM/OEA along with one number extra having suitable capacity as required .Extra Minimum 2000 Liters suitable for 12 hours continuous operation fabricated out of 3 mm thick M.S. sheet complete with all standard accessories and fuel piping between fuel tank and diesel engine with MS . class 'C' pipes of suitable dia. Complete with valves, level indications & accessories recommendation,

f) Exhaust System: Residential exhaust silencer .

g) Starting System: 24V DC starting system comprising of starter motors: voltage regulator and arrangement for initial excitation complete with battery as required or as per OEM/OEA .

h) Acoustic and weather proof enclosure with arrangement for fresh air intake for cooling of the engine & alternator, extraction, discharging hot air in to the atmosphere as per CPWD specification and norms of CPCB-II sound proofing done with help of high quality rock wool is further covered with fiberglass sheet and perforated powder coated sheet or as per OEM Standard design

(DG SET) 1 Nos. 320 KVA

Supplying and fixing additional exhaust gas piping of 250 mm Welded black MS, C class pipe conforming to IS : 3589 cut to required lengths and installed with necessary bends and clamps, anti- vibration mountings, insulation of exhaust system with Rockwool, 50 mm thick wire mesh & aluminum cladding, below etc., as required as per specifications.(The item shall be measured on linear basis per each run of exhaust piping from outlet of silencer to end of exhaust piping)

Practice Pool Panel (Outdoor Type)

Incoming 1 :- 1 Nos 400 amp MCCB with all necessary protection

Bus Bars

500 Amps TPN Aluminium bus bars shall be colour coded and insulated by heat shrinkable sleaves & clip on shrouds for joints.

Outgoing 4 Nos. 160 amp 4P MCCB with Thermal Magnetic based release for O/C & S/C Release, Breaking Capacity 36KA, Ics=100%Icu. (3 Nos. 46.3KW Pumps + 1 Nos. Spare)

9 Set Breaker ON/OFF, indicating lamps for each Outgoing.

Supplying of one No. XLPE insulated, PVC Sheathed, armoured aluminium conductor power cable of 1.1KV grade of following size in the ground

3½ x 400 Sq.mm.(For DG Set, transformer and panels)

Supplying of one No. XLPE insulated, PVC sheathed, armoured copper conductor power cable of 1.1KV grade of 4 c x 25 sq.mm size in the ground (For pumps etc)

Supplying of one No. XLPE insulated, PVC sheathed, armoured copper conductor power cable of 1.1KV grade of 4 c x 35 sq.mm size in the ground (For pumps etc)

For Practice Pool - Water Volume 812.5 m3

Supply, Installation, Testing and Commissioning of Outdoor The inverter heat and chill pump can adapt to wide climate. Under lab test, it keeps stable operation in -15℃ to 55℃. When the machine is turned on, its soft start technology avoids a sudden fluctuation in the power supply, which protects the circuit , The DC inverter fan with special design blades not only saves energy but also helps to keep the operating noise 20% lower, The central electric control box with self-developed driver board inside adopts fluorine-cooling technology, helping heat dissipation of the drive board, to ensure an efficient operation.In terms of central control, the unit adopts a self-developed driver board that widely proved by the market. Equipped with a 64-bit chip, 0.1oC accurate temperature control, and PID automatic defrosting, the unit has a powerful control system with 5 inch colorfull touch screen display, Titanium Heat Excahngers, Flowswitch, Water Pump Control . (Booster mode) Output 175 kW, Input - 20.97 kW.with 2 Nos of Rotary DC TYPE inverter compressors, 2 nos Vertical exhaust fan direction . Input/ Output water connections of 110mm dia PVC Type with water flow of 50m3/hour/60m3/hour Maximum capacity of pool temprature shall be 32°C, Optimised as per standard. Refrigerant - R410A, SUPPLY - 380-440V/3N/50HZ

Providing and fixing of thermal pool cover blue deluxe, bubble type, 400-500 micron complete etc as required & as per direction of Engineer-in-charge

Providig and fixing of SS 316 roller shaft with wheel support capable to handle 25 mtr long rolls in aluminium telescopic 5 m long complete etc as required & as per direction of Engineer-in-charge

Plumbing for Complete System

Supply, Laying and Fixing of uPVC Pipes (Sch 80/40) with their respective fittings i.e. elbow , tee, sockets etc of various sizes. All includes. Suction Water Pressure Header - 1 Nos. Delivery Water Pressure Heder - 1 Nos. Bypass Pipelines from Main Delivery Line to Suction Pressure Header of suitable sizes Pipe from Suction Pressure Header to Each Heat pumps of suitable sizes -3 Nos Pipes from Heat pump to Delivery Pressure Header of suitable sizes - 3 Nos Bypass Pipelines from Delivery Pressure Header to Main Delivery Line to Pool. All Including high pressure Flow Control Valves , Flanges, Butteryfly Valves etc complete as required.

Operation & routine maintenance of 3 x 210 KW Heat pump including electrical panel and piping to interconnect the heat pumps to water filteration plant installed near swimming pool at Indira Gandhi International Sports Stadium, Golapar, Haldwani by deputing minimum staff as following complete etc. as required on all days i/c Sunday & holidays

Skilled Staff - 1 No.

Unskilled Staff - 1 No