Pey Jal Nigam Uttarakhand Tender
View complete overview of Uttarakhand Pey Jal Nigam Uttarakhand Tender
Pey Jal Nigam Uttarakhand Tender
Civil And Construction
Building Construction
Eprocure
Opening Date14 Feb 2025
Closing Soon6 Mar 2025
Tender Amount₹ 3,09,68,000
Technical
Technical
Class Of Bidder
... View More
For building works, the class eligibility requirement is "A" and for Electrical works, it is "D" and above.
Technical Capacity
... View More
The required prior work experience for the bidder includes having experience of similar work during the last 7 years. The bidder should have satisfactorily completed at least one similar work of value not less than 80% of the estimated cost put to tender. Alternatively, they should have completed at least two similar works of value not less than 60% of the estimated cost put to tender, or at least three similar works of value not less than 40% of the estimated cost put to tender. The actual value of such similar executed works shall be increased at a simple rate of 7% per annum to bring it to the current costing level. Additionally, the bidder should have executed at least 30% of the work cost put to tender during the immediate last three consecutive financial years. The experience of work should be under a Central/State Govt. Department and its Undertakings. The bidder is also required to provide details of similar works, including the project name, employer, description of work, contract number, value of contract, date of issue of work order, stipulated period of completion, actual date of completion, and cost of work after completion of contract. Certificates from the Engineer-in-charge (not below the rank of Executive Engineer) for the similar works completed should also be attached. For evaluation purposes, 60% marks are allocated for minimum eligibility criteria, and 100% marks for twice the minimum eligibility criteria or more, with pro-rata basis for in-between values. The parameter for experience in similar works is given 20 marks. Specific percentage values for similar works completed are mentioned as 80%, 60%, 40%, and 30% of the estimated cost put to tender, and the bidder should have completed the works satisfactorily.
Costs
EMD
₹ 6,19,000Document Cost
₹ 5,900Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MDPEY_80307_1Tender No
229/nivida udham singh nagar/29 dated 13-2-2025Tender Authority
Pey Jal Nigam Uttarakhand ViewPurchaser Address
-Website
http://uktenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Extra over single under ream for providing additional bulbs in under reamed piles,
under specified diamete 400 mm dia piles
82
-
-
... More
Carriage of material by Mechanical Transport including loading,unloading and
stacking of lead 15 Km.
24.06
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming
and watering, lead up to 50 m and lift upto 1.5 m.
78.91
-
-
... More
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos / Lindane E.C. 20% with 1% concentration
263.05
-
-
... More
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mmnominal size, well rammed and consolidated and grouted with fine sand, including
finishing the top smooth.
80.26
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand : 8
graded stone aggregate 40 mm nominal size)
24.56
-
-
... More
Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement
: 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size).
78.93
-
-
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately). All works upto plinth level
149.2
-
-
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately). All works above plinth level upto floor V level
210.25
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars
48768.4
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for
:Foundations, footings, bases of columns, etc. for mass concrete
178.5
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for :Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
35.26
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for :Columns,
Pillars, Piers, Abutments, Posts and Struts.
332.64
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for : Lintels,
beams, plinth beams, girders, bressumers and cantilevers.
808.47
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for
:Suspended floors, roofs, landings, balconies and access platform
801.49
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for :Shelves
15.55
-
-
... More
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes,
M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin- charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. sqm
622.91
-
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement
mortar 1:6 (1 cement : 6 coarse sand)
170.16
-
-
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation
7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand)
104.8
-
-
... More
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of
half brick masonry.
104.8
-
-
... More
Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
4228.25
-
-
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non- decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with
necessary screws
90.36
-
-
... More
Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured).
88.2
-
-
... More
Providing and fixing aluminium sliding door bolts, ISI marked anodised anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade,
with nuts and screws etc. complete :300x16 mm
84
-
-
... More
Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with
necessary screws etc. Complete.250x10 mm
110
-
-
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
399.15
-
-
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
757.62
-
-
... More
Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Galvanised M.S. Wire gauze with 0.63 mm dia
wire and 1.4 mm aperture on both sides
65.37
-
-
... More
Providing & fixing glass panes with putty and glazing clips in steel doors, windows,
clerestory windows, all complete with :5.5 mm thick glass panes
68.61
-
-
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement
: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
676.49
-
-
... More
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
91.06
-
-
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. completeGranite of any colour and shade:Area of slab
over 0.50 sqm
15.72
-
-
... More
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges
etc. complete.
11
-
-
... More
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work
133.38
-
-
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
269.98
-
-
... More
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm
nominal size). each
357
-
-
... More
Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge. : Powder coated minimum thickness 50 micron aluminium tubular handle bar
194
-
-
... More
6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand)
650.33
-
-
... More
12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)
1601.87
-
-
... More
15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6
fine sand)
956.75
-
-
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and
smooth complete.
2252.2
-
-
... More
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer
2252.2
-
-
... More
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to
prepare the surface even and smooth complete.
956.75
-
-
... More
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre
2252.2
-
-
... More
Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @
2.20kg/ 10 sqm
956.75
-
-
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
207.48
-
-
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :
(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @
0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for
48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
135.4
-
-
... More
Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 20mm nominal size)
15.41
-
-
... More
Providing and laying APP(Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane :3 mm thick
308.24
-
-
... More
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75mm deep chase
71.19
-
-
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement rounding the edge sand making and finishing the outlet complete.
7
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in
Charge.15 mm dia nominal bore
725
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in
Charge.20 mm dia nominal bore
605
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in
Charge.25 mm dia nominal bore
500
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in
Charge.32 mm dia nominal bore
225
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in
Charge.40 mm dia nominal bore
165
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in
Charge.50 mm dia nominal bore
120
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 65 mm nominal inner dia Pipes
15
-
-
... More
Providing and fixing CPVC UNION-SOC, FITTINGS HSN CODE: 39174000 - 15 mm dia nominal bore
145
-
-
... More
Providing and fixing CPVC UNION-SOC, FITTINGS HSN CODE: 39174000 - 20 mm dia nominal bore
121
-
-
... More
Providing and fixing CPVC UNION-SOC, FITTINGS HSN CODE: 39174000 - 25 mm dia nominal bore
100
-
-
... More
Providing and fixing CPVC UNION-SOC, FITTINGS HSN CODE: 39174000 - 32 mm dia nominal bore
45
-
-
... More
Providing and fixing CPVC UNION-SOC, FITTINGS HSN CODE: 39174000 - 40 mm dia
nominal bore
33
-
-
... More
Providing and fixing CPVC UNION-SOC, FITTINGS HSN CODE: 39174000 - 50 mm dia
nominal bore
24
-
-
... More
Providing and fixing CPVC UNION-SOC, FITTINGS HSN CODE: 39174000 - 65 mm dia
nominal bore
3
-
-
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic
floats complete :25mm nominal bore
11
-
-
... More
Providing and fixing gun metal non- return valve of approved quality (screwed end) :50 mm
nominal bore : Horizontal
6
-
-
... More
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore
19
-
-
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved
make conforming to IS:8931.15 mm nominal bore
6
-
-
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved
quality conforming to IS:8931 15mm nominal bore
29
-
-
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Circular
tank
6000
-
-
... More
Supply and fixing of kIRLOSKER Centrifugal Self Priming Mono block Pump (KIRLOSKAR & SP2HM) Pump Type Self Priming Mono block Pump, Size (Dia) of solids in liquid to be handled 15.5 millimeter, Suction Pipe size (Nominal) 50 millimeter, Delivery pipe size (Nominal) 50 millimeter, Speed in RPM 2900 Impeller Material Cast Iron, Motor Type AC Motor ISI Marked 3 Phase , 415 V ± 10%, 50Hz±3%Hz complete in all aspects as per direction of Engineer In-charge
1
-
-
... More
Supply and fixing of 15 mm Wall Mounting Combination Tap Assembly conforming to IS:8931: Latest, Type of Tap Wall Mounting Combination Tap Assembly conforming to IS:8931: Latest, Material of Taps/ Stop Valves Copper Alloy (Brass) as per table 1 of IS:8931;Latest, Nominal Size of Taps/ Stop valves (mm) 15, Finish Of Taps Nickle- Chromium Plated for service grade No. 2 for Brass Taps and as per IS requirements., Wheather ISI Marked, complete in all aspects as per direction of Engineer In-charge
7
-
-
... More
Supply and fixing Water Heater-geyser 25 LTR/125420, Capacity litres (Litres) 25 liter BEE Star Rating (Central Ministries/ Departments while procuring shall ensure that the items carry 5 star or higher Star Rating of BEE) 5, Material of Inner Container Copper, Warranty (Year) 2 , Wall Mounting Vertical, Pressure Rating 60 N/Sq.cmcomplete in all aspects as per direction of Engineer In-charge
3
-
-
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid
10
-
-
... More
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. Of quality and make as approved by Engineer - in -
charge.
10
-
-
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar tap
10
-
-
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :510x1040 mm bowl depth 225 mm
2
-
-
... More
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :150 mm diameter
7
-
-
... More
Providing and fixing mirror of superior glass (of approved quality) and of required shape and
size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 1500x450 mm
10
-
-
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm,
weighing not less than 190 gms.
10
-
-
... More
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.
10
-
-
... More
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
10
-
-
... More
Providing and fixing soil, waste and vent pipes :100 mm dia Sand cast iron S&S pipe as per
IS: 1729
105
-
-
... More
Providing and fixing soil, waste and vent pipes :75 mm dia Sand cast iron S&S pipe as per
IS: 1730
85
-
-
... More
Providing and fixing M.S holder-bat clamps of approved design to PVC/Sand Cast iron/ cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc.For 100 mm dia pipe
26.25
-
-
... More
Providing and fixing M.S holder-bat clamps of approved design to PVC/Sand Cast iron/ cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc.For 75 mm dia pipe
21.25
-
-
... More
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. Hubless centrifugally cast (spun) iron epoxy coated
inside & outside as per IS:15905 ;100 mm diameter pipe
20
-
-
... More
Providing and fixing bend of required degree with access door, insertion rubber washer 3
mm thick, bolts and nuts complete. Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 : 75 mm diameter pipe
14
-
-
... More
Providing and fixing 100 mm sand cast iron S&S plain bend of required degree. Hubless
centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 :100 mm diameter pipe
32
-
-
... More
Providing and fixing 100 mm sand cast iron S&S plain bend of required degree. Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15906 :75 mm diameter
pipe
48
-
-
... More
Providing and fixing heel rest sanitary bend. 100 mm diameter pipe
24
-
-
... More
Providing and fixing heel rest sanitary bend. 175 mm diameter pipe
18
-
-
... More
Providing and fixing double equal plain junction of required degree. 100x100x100mm
20
-
-
... More
Providing and fixing double equal plain junction of required degree. 75x75x75x75 mm
14
-
-
... More
Providing and fixing single unequal plain junction of required degree : Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 100x100x75 mm
14
-
-
... More
Providing and fixing single equal plain invert branch of required degree : Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 : 100x100x100 mm
24
-
-
... More
Providing and fixing single unequal plain invert branch of required degree : Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 : 100x100x75mm
18
-
-
... More
Providing and fixing Hubless centrifugally cast iron offsets epoxy coated inside & outside as per IS:15905, 65 mm offsets With 75 mm dia pipe
7
-
-
... More
Providing and fixing Hubless centrifugally cast iron offsets epoxy coated inside & outside as per IS:15905, 130 mm offsets With 100 mm dia
10
-
-
... More
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet Sand cast iron S&S as per IS: 3989
29
-
-
... More
Providing and fixing C.P. brass 32mm size bottle trap of approved quality & make and as per the direction of engineer-ing-charge.
11
-
-
... More
Providing and fixing terminal guard 100 mm Sand cast iron S&S as per IS - 1729
11
-
-
... More
Providing and fixing collar : Sand cast iron S&S as per IS - 1729 100mm
52.5
-
-
... More
Providing and fixing collar : Sand cast iron S&S as per IS - 1729 75mm
42.5
-
-
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :110 mm diameter
63
-
-
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Coupler(110 mm)
21
-
-
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Bend 87.5 degree 110 mm bend
21
-
-
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs,screwed with M.S. screws of required length including. 110 mm
35
-
-
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
20
-
-
... More
Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete 450 mm dia RCC pipes.
20
-
-
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded 300 mm diameter S. W. pipe
20
-
-
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
-
-
... More
Extra depth for manholes Size 120x90 cm With F.P.S brick class designation 75
1.8
-
-
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate
3.6
-
-
... More
12 mm cement plaster finished with a floating coat of neat cement of mix : 1:3 (1 cement: 3 fine sand)
3.6
-
-
... More
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality L D- 2.5 Rectangular shape 600x450 mm internal dimensions
1
-
-
... More
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design :With 20x20 mm square bar
15
-
-
... More
Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R- 2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer- in-charge. The product performance shall carry guarantee for 10 years against any leakage. For vertical surface two coats @ 0.70 kg per sqm
16.34
-
-
... More
Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R- 2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer- in-charge. The product performance shall carry guarantee for 10 years against any leakage. For horizontal surface one coat @1.10 kg per sqm.
3.6
-
-
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
-
-
... More
Excavation in foundation for retaining & breast walls in all types of soils and rocks including lead, lift and disposal of surplus material as per direction of engineer - in - charge
33.25
-
-
... More
Concrete with cement, coarse sand and 40 mm gauge stone ballast in proportion 1:4:8 in foundations and floors including supply of all material, labour and T&P etc. required for proper completion of the work.(Based on PWD specifications) Random rubble masonry wall
8.32
-
-
... More
Random Rubble Stone Masonry laid in 1:6 cement and sand mortar, in breast walls, retaining walls, parapets, scuppers, etc. including supply of all material, labour, T&P and royaltiies etc. Random rubble masonry wall
74.71
-
-
... More
Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7
49.3
-
-
... More
Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift.
284.3
-
-
... More
Zero B Potable Water Purification System with inbuilt water cooler. RO (Zero b RO 60-80-50 CC). Standard Parameter :- Certification for the product : CE/Certification No and Date : CE/AF/2020- 21/0434675543/Manufacturers Quality System Certifications : ISO 9001:2015/Manufacturers Environment Management System Certifications : ISO 14001:2004/Manufacturers Health and Safety Management System Certifications : ISO 18001:2007/Conformity to Standard for Ultraviolet system : IS 14724 (latest) for water purification system with Ultraviolet disinfection/Output Water Conforming standard : IS 10500 (latest)
Performance Parameter :- Type of water purification technology : RO/Power consumptions of system (with ± 5% tolerance) (in watt) : 575/Maximum Input Wate+B25r TDS allow to the system ; 1000/Input water hardness : 500 ppm or less//Input water pH : 6.5 to 8.5/Input water chlorine : 0.2 ppm/Input water iron : 0.2 ppm/Input water turbidity : Less than 5 NTU/Operation mode : Fully automatic with auto cut off/Availability of sediment and activated carbon filter : Yes/Storage tank : In- Built. Material of water Storage Tank : Stainless Steel SS 304/Storage tank capacity up to float valve level (in liter) : 80/Stages of purification : 7/No of RO Membranes provided : 2/RO Membrane rating : 100 GPD/RO Membrane flushing : Auto flush at every start,every stop and every one hour for 1 minutes/No of Particulate filter
1
-
-
... More
FURNITURE
DOUBLE BED WITHOUT TROLLEY
Model No.- DBS 5009
Size:- 2000W x 1800L x 930HMM
SPECIFICATION :- Good Quality Wooden Bed Made Of 18mm Thick PLPB Board With 2mm Thick Pvc Edgebanded Finish With As Per Approved Laminate Shade . 50MM High Skirting 9mm Thick Bed Size 2060L x 1880W x 930H . Bed Understruture frame Made Of Prime Quality CRCA sheet in 1mm Thick Powder Coated . One Box Provided In Bed For Storage Systems . Box Moving On Rail Channel Support . Box Provided Pull Drawer Handles Flushed With Box Front Facia . 450mm Ground To Bed Height . Wooden Panels Flat Edge Duly Sealed With Pvc Beading . All Wooden Panels , Gables & Modesty Fix Joints With Minifix Dowels & Other Fitting Equipment . Wooden Panels Cleaning Corner Knitted Finish . All Wooden Panels Prime Quality Board With ISI Marked . Understructure Metal Pieces Shall Be Welded Properly Strongly and conformity with regulations . CO2 Welding Shall Be Used .Metal Pipe & sheet 10 tank treatment with minimum 60-70 micron powder coating.
2
-
-
... More
CHAIR
MODEL :-DCS-5026 SPECIFICATION :-
Providing and Placing in position Library Chair. The seat and back shall be made up of injection moulded high impact strength polypropylene polymer with indoor gate UV resistance. The dimensions of Back shall be 4.20 cm. (W) X 4.15cm. (H) and of seat shall be 4.35cm. (W) X 5.15cm. (D). The powder-coated (DFT 40-60 microns ) frame structure shall be made of 3.5+0.03cm x1.50.03cm x0.16 0.0128cm thk M.S. E.R.W. tube and welded connecting tube
made of dia 2.22+0.03cm x 0.16+0.0128cm thk M.S. E.R.W SOUARE tube to form the Mainframe assembly. The shoes are made of high impact strength polypropylene polymer compound with indoor grade UV resistance and pressed fitted with tubular frame.
36
-
-
... More
TABLE
MODEL:-DCT-3004 SPECIFICATION:-
The centre table top is 18mm PLPB duly edge banded.Centre table pole made in SS 202 size is 75mm dia 1.5mm thick . Base plate made thickness is 6 mm in MS Duly powder coated. Top has given SS 202 G plate in the thickness of 3mm.
3
-
-
... More
WARDROBE
SIZE:-900(W)*6000(L)*1800(H)MM
SPCIFICATION :- WARDROBE COMPLETE MADE IN 18MM THICK PLPB LAMINATE DULY 2MM THICK PVC EDGEBANDING IT IS HAVING 2 SHELVES & ONE SS HANGING ROAD IN WARDROBE .ALL HARDWARE USE IN WARDROBE EBCO COMPANY. COMPLETE WARDROBE FITTING MULTIBORING FIX (MINI FIX).
33
-
-
... More
SINGLE BED WITHOUT TROLLEY
Model No.- DBS 5008
Size:- 1130(W)*2060(L)*930(H)M
SPECIFICATION :- Good Quality Wooden Bed Made Of 18mm Thick PLPB Board With 2mm Thick Pvc Edgebanded Finish With As Per Approved Laminate Shade . 50MM High Skirting 9mm Thick MDF Board Outer Border Design . Bed Size1130(W)*2060(L)*930(H)M . Bed Understruture Made Of Prime Quality CRCA Metal Square Pipe 25 x25 With 1mm Thick PXowder Coated . One Box Provided In Bed For Storage Systems . Box Moving On Rail Channel Support . Box Provided Pull Drawer Handles Flushed With Box Front Facia . 450mm Ground To Bed Height . Wooden Panels Flat Edge Duly Sealed With Pvc Beading . All Wooden Panels , Gables & Modesty Fix Joints With Minifix Dowels & Other Fitting Equipment . Wooden Panels Cleaning Corner Knitted Finish . All Wooden Panels Prime Quality Board With ISI Marked . Understructure Metal Pieces Shall Be Welded Properly Strongly and conformity with regulations . CO2 Welding Shall Be Used .Metal Pipe & sheet 10 tank treatment with minimum 60-70 micron powder coating .
1
-
-
... More
WARDEN TABLE MODEL :- CF 110
SIZE :- 1200(W)*600(L)*750(H)MM
SPECIFICATION:- Study Table :- Table top 18mm thick PLPB Board(BSL/OSL) with 2/.8mm thick PVC edge banding tape with as per approved laminate shade INTERIOR GRADE. Computer table size 1200mm w x 600mm d x 750mm ht all made of 18mm thk PLPB board. Wooden Key Board Tray key board slides with telescopic channel, Right hand side provided fixed pedestal unit Size -400mm w x 600mm d x 725mm ht 2 drawer + 1 filling with central lock & handle Left hand side open storage space for UPS & CPU. All exposed edges covered with 2 mm pvc edge banding tape and non exposed edges covered with .8mm thk pvc edge banding tape. Front side modesty panel 18 mm thick, Wooden Key Board Tray sliding with hanging keyboard telescopic channel, All wooden panels Price Quality Board with ISI marked.
1
-
-
... More
VISITOR CHAIR WARDEN MODEL :- DDS 1214
SPECIFICATION:- Providing & Fixing High Back Chair . Overall Size 715W x 715D x 1140H . Seat Plywood Made Of 12mm Hot Pressed . Upholstery PVC Structure Moulded With Prime Quality High Stretch Knitted Polyester Fabric . PHA ( Gas-Lift ) 85mm (TDC 152mm & BDC 67) . Seat & Back Are Firmly Connected To The Base Frame Machanism Moves In The Ratio 1:2 . Machanism Provided Upright Position Locking . Tilt Adjustment Can Be Operated In Seating Position . Chair Max Height 1140 . 470W x 480D Base Seat 60mm Thick Moulded With PU Foam & 510W x 690H Back Seat 60mm Thick Moulded With HD Foam . 500 Handle In / 640 Handle out Arm Rest Fitted To The Seat With Armrest Connecting Brackets . Armrest Should Be Injection Moulded From Black Nylon PP + PC . Height From Seat To Ground 450mm . Height From Seat To Handle 220mm . Seating Height Can Be Adjusted With a Pneumatic Gas Lift . Understructure Used Steel Inserted PP + PC Base With 3 Pieces Bellow . Pedestal Pitch Centre Dia 665mm Without Casters . Casters Made Of Moulded Black Nylon Metal Bolt Inserted & Fitted With 5 Nos . Twin Wheel Casters 50mm Dia . Pedestral Pitch Centre Dia 665mm
4
-
-
... More
MID BACK CHAIR WARDEN MODEL :- DDS 1213
SPECIFICATION:- Supply of chairs with out arms of the following specification
Pedestal Base - Glass Fibre Nylon with ABS/ NylonTwin Caster Wheels Minimum 5 Nos, of 50 mm Size, seat material -PU Foam covered with Fabric, Density of PU foam used in seat KG per Cu Meter (+/- 3) -45, Density of PU foam used in backrest in KG per Cu Meter (+/- 3) -45, Material of Fabric Back Cover / Material for Backrest -100% polyester fabric, Material of Fabric of Seat Cover -100% polyester fabric, GSM/Thickness of fabric ±5%(Gram/Square meter) -250 gram, Chair Type -push back Tilt Tension Adjustment -Yes,Height Adjustment ± 5(mm) up to 100 mm, Arm -With, Type of backrest support -backrest symmetrical lumber support Colour of Fabric for Seat and Backrest -black Back type -push back Backrest is made of two pcs injection moulded frame -Backrest is made of one piece injection moulded frame backrest has separate adjustable headrest -No, Seat type -fixed
Type of locking -upright locking DIMENSION
Overall Chair Height ±15mm -860, Backrest Height ±15mm -460 millimeter, Backrest Width
±10mm -410 millimeter, Seat Height ±15 mm -420, Seat Width ±10 mm -440, Seat Depth
±10 mm -400 millimeter, Thickness of MS Plate Joining the under structure with Seat -1.2 millimeter, Thickness of Plywood used in Seat ±1(mm) -12 mm, Thickness of Plywood used
1
-
-
... More
DINING TABLE
Model No.- DCT 3017
Size:- 1500(L)*900(W)*750(H)mm SPECIFICATION :-
Dining Table, S.S. Pipe Frame, Particle Board Post Forming Top, 25mm Thick, Size in mm -
1500 X 900 X 750. TABLE FRAME MADE IN 30X30 MM TABLE TOP MADE IN 1.2MM SS SHEET THICK.
6
-
-
... More
SINGLE BED WITHOUT TROLLEY
Model No.- DBS 5006
Size:- 965W x 2080L x 450/850HMM
SPECIFICATION :- Metal Bed . Bed Made Of Prime Quality CRCA Rectangular & Square Metal Pipe Powder Coated Finish With Approved Shade . Bed Main Leg Made Headset/Footrest Of Sqaure 40x40x1.2mm Thick Metal Pipe Duly Powder Coated . Bed Two Side Supported 50x25 Metal Rectangular Pipe 1.2mm Thick Powder Coated . Bed horizontal Two Side 50x25x1.2mm connected with 5 nos. of pipe in the thickness of 25x25x1.2mm . Bed Structure headset and footrest support Pipe 25x25x1.2mm Welded To main leg 40x40x1.2mm Metal Pipe . Headset and footrest has given 18mm PLPB Duly edge banded between of the two vertical pipe 25x25 in 1.2mm thick. 12mm PLY given for the mattress.No Sharp Edges Of Pipe Ends . Legs Of The Bed Hard Rubber Shoes .
Metallic Panels Screw With Nut & Bolt .All Metal Pieces Shall Be Welded Properly Strongly and conformity with regulations . CO2 Welding Shall Be Used .
Provided high quality cold rolled close annealed(CRCA) pipe anticorrosion treated components, duly power coated with ten tank phosphating procedure with 60 to 70 microns.
30
-
-
... More
STUDY CHAIR
Model No.- DCS-5036
SPCIFICATION :- Student Chair Perforated Seat and Back without Cushions Complete Powdercoated .
30
-
-
... More
STUDY TABLE
Model No.- DT 201
Size:- Size 750Hx1200Wx600D
SPCIFICATION :- Supplying & STUDY TABLE Desks Top 18mm Thick PLPB Board ( OSL
) With 2mm Pvc Edgebanded Finish With As Per Approved Laminate Shade . Ovall Size 1200W x 600D x 750H . Understructure Made Of Prime Quality CRCA 25x25mm Square Metal Pipe Duly Powder Coated . Table Understructure 1150W X 550D In 25 X 25 Square Pipe With 1.2mm Thick Duly Powder Coated. Height Of The Understructure 700mm .
Table Top Wooden Panels Flat Edge Duly Sealed With 2mm Thick Pvc Beading . Understructure CRCA Square Metal Pipe 25X25mm With 1.2mm Thick Four Side Welded With Vertically Metal Pipe . Metal Storage (3D ) Made Of Prime Quality 0.8mm Thick CRCA Metal Sheet Tank Treatment With Minimum 60 - 70 Micron Powder Coating . All Frames Rectangular Pipe & Square Metal Pipe Closed With Pvc Caps . Legs Of The Table Hard Rubber Shoes . All Metal Pieces Shall Be Welded Properly Strongly and conformity with regulations. CO2 Welding Shall Be Used .With at least 10 tank treatment cleaned from oil grease, dust and other dust . Automatic Spray Coating Shall Be Applied To Be Followed By a Drying Process In a Thermal Furnace With Suitable Temperature And Time For The Process .
30
-
-
... More
ELECTRICAL WORKS
WGSTLPT Point wiring in PVC conduit, with modular type switch. Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. Group C
139
-
-
... More
WGSTLMIDTC Twin Control point wiring in PVC conduit, with modular type switch: Wiring for twin control light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.
13
-
-
... More
WGSTLPP2 Power plug wiring in PVC conduit (2x4 sq. mm) Wiring for light/power plug with 2x4 sq.mm FR PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core
cable for loop earthing as required.
490
-
-
... More
WGSTLSB Circuit/ submain wiring in PVC conduit: Wiring fir curcuit/ submain wiring alongwith earth wire the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm
earth wire
900
-
-
... More
WGSTLSB Circuit/ submain wiring in PVC conduit: Wiring fir curcuit/ submain wiring alongwith earth wire the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.. 2 x 2.5 sq.mm. + 1 x 2.5 sq.mm. earth
wire.
540
-
-
... More
WGSTLSB Circuit/ submain wiring in PVC conduit: Wiring fir curcuit/ submain wiring alongwith earth wire the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.4 x 6 sq.mm. + 2 x 6 sq.mm. earth wire.
450
-
-
... More
WGSTLSB Circuit/ submain wiring in PVC conduit: Wiring fir curcuit/ submain wiring alongwith earth wire the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 4 X 10 sq. mm + 2 X 6 sq. mm earth
wire
350
-
-
... More
PVCCON S/F PVC conduit: Supplying and fixing of following sizes of PVC conduit along with accessories in surface / recess including painting in case of surface conduit, or cuttting the wall and making good the same in case of recessed conduit as required. 25mm
1050
-
-
... More
PVCCON S/F PVC conduit: Supplying and fixing of following sizes of PVC conduit along with accessories in surface / recess including painting in case of surface conduit, or cuttting the wall and making good the same in case of recessed conduit as required. 25mm
750
-
-
... More
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with
suitable size of phenolic laminated sheet cover in front including painting etc as required.75 mm X 75 mm X 60 mm deep
124
-
-
... More
PTSWEB S/F modular type switch/ socket: Supplying and fixing following modular
switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 amps switch
80
-
-
... More
PTSWEB S/F modular type switch/ socket: Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 amp socket outlet
80
-
-
... More
PTSWEB S/F modular type switch/ socket: Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Telephone socket outlet
1
-
-
... More
MODFREB S/F modular type electronic fan regulator: Supplying and fixing two module
stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
30
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or
in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
75
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16
A modular switch, connections etc. as required.
49
-
-
... More
CREB S/F ceilling rose: Supplying and fixing 3 pin, 5 amp. ceilling rose on the existing
junction box/ wooden block including connection etc. as required
36
-
-
... More
Installation, testing and commissioning of pre-wired, fluorescent fitting/ compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling / wall, including connection with 1.5 sq.mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required.
103
-
-
... More
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq, mm FR PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc.
as required.
30
-
-
... More
Installation of exhaust fan upto 450 mm sweep in the existingopening, including making the hole to suit the size of the above fan, making good the damage, connection, testing, commissioning etc. as required.
6
-
-
... More
LOUSHEF Fixing louvers/shutters for exhaust fan: Extra for fixing louvers/shutters complete with frame for a exhaust fan of all sizes.
6
-
-
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). 8 way (4 + 24), Double door
5
-
-
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). 6 way (4 + 18), Double door
3
-
-
... More
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissoning etc. as required. 63 amps
110
-
-
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as Required.Single pole
117
-
-
... More
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
2
-
-
... More
Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 600 mm width X 50 mm depth X 2.0 mm thickness
273
-
-
... More
EARGIPL G.I earth plate elctrode: Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt
as required.
4
-
-
... More
EARG125X6 S/L 25 mm x 5 mm G.I. earth strip in ground: Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
80
-
-
... More
Supply and fixing of 1200MM SWEEP Ceiling Fan with Regulator Model : Double Ball Bearing, Sweep : 1200mm, Body : Cast Aluminium (Both top and bottom) Colour : White, Accessories : Complete Body with Blades, Downrod, Canopies (2 numbers), Fixing Clamps & Rubber Bush. Regulator : Resistance / Switch type Electronic Input supply : Single phase 230VAC +/-10% ; 50Hz +/-5%, Make : Usha / Orient / Khaitan / Crompton Greaves/Havells / Bajaj / Almonard / Calcutta Fans complete in all aspects as per direction of Engineer In- charge 1200 mm sweep
30
-
-
... More
Supply and fixing of 200MM SWEEP exhaust fans Sweep size 200 mm, No. of blades 6, Switch No, Guard No, Motor speeds (No.) 1, Motor type Normal Speed, Remote control option No, Oscillation No, Body colour White, Finish Glossy, Blade finish Opaque, Blade design Aerodynamically designed & Balanced Blade, Air delivery 520 m³/h, Rated Speed 1350 revolution per minute, Noise level 42 dB, Power consumption 32 W, Rated voltage 230 V, Rated frequency 50 Hz, Packaging dimensions WxHxD 33 cm x 15.5 cm x 33.3 cm, Weight 1.5 kg, Motor protection through thermal overload protection device N0, Guarantee 2 Year. complete in all aspects as per direction of Engineer In-charge. 200 mm sweep
6
-
-
... More
Supply and fixing of Philips Rectangle Shape Led Bulb 8 Watt (T-Bulb B22), Body Material : Polycarbonate, Wattage : 8 Watt, Power Factor : 0.9, Length : 8 inch, Width : 1.2 inch, Height : 4 inch, Warranty : 2 year , Luminous Efficacy (Lm/W) 70 - 140, Power Factor 0.9, Frequency 50 Hertz, Length 8 inch, Width 1.2 inch, Height 4 inch complete in all aspects as
per direction of Engineer In-charge .
10
-
-
... More
Supply and fixing of 18 Watt/1800 lumen 6500 K LED Tubelight, Type of Tube Light Cap G- 13 Bi-pin, Ingress Protection in IP IP 20, Lamp Shell material Polycarbonate, Length of tube light 1220mm, LED lamp efficacy (Lm/W) 100, Colour Rendering Inde (CRI) / = 80, Total Harmonics (%) / = 15%, Beam Angle (Degree) / = 120 degree, Operating Voltage range (Volt) 100-300, Driver Efficiency (%) more than 85%, Surge Voltage withstand (KV) 2.5 KV, LED Chip Efficacy (Lm/W) 130, Rated Voltage for Performance and life (Volt) 220-240, Lumen Maintenance at 25 deg;C after 6000 hrs (%) 80%, LED Chip Wattage (Individual) (Watt) 0,25, Power Factor / = 0.9, complete in all aspects as per direction of Engineer In-charge
68
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Upto 35 sq. mm
24
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Above 185 sq. mm and upto 400 sq. mm
16
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Above 120 sq. mm and upto 400 sq. mm
20
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. 3½ X 300 sq. mm (70mm)
3
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. 3½ X 185 sq. mm (57mm)
3
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1
kV grade as required. 4X 25 sq. mm (28mm)
2
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. 4X 10 sq. mm (25mm)
2
-
-
... More
Supply,of following sizes of PVC sheathed LT XLPE armoured, aluminium 1.1KV grade, as required of the following sizes. 3.5c x 300 sq.mm cable
10
-
-
... More
Supply,of following sizes of PVC sheathed LT XLPE armoured, aluminium 1.1KV grade, as required of the following sizes. 3.5c x 185 sq.mm cable
10
-
-
... More
Supply,of following sizes of PVC sheathed LT XLPE armoured, aluminium 1.1KV grade, as required of the following sizes. 4c x 25 sq.mm cable
5
-
-
... More
Supply,of following sizes of PVC sheathed LT XLPE armoured, aluminium 1.1KV grade, as required of the following sizes. 4c x 10 sq.mm cable
5
-
-
... More
1 nos. 500A 415V, Ics=25KA, 4P MCCB with microprocessor release having O/L, S/C E/F,O/V & U/V protection. 1 nos. Digital type multi function meters to show (V,A,KWh,KVAH,KW,KVA,PF,Hz) with cast resin CTs & communication port . 1 Set of phase indicating lamp with MCB. 1 nosTPN surge protection device of class 1& 2, 3 Nos. CT's 500/5A accuracy Class-I, 15VA Burden, BUSBAR :1set of TPN Al. Bus bar of minimum of 250A capacity with heat shrinkable coloured sleeves & i/c DMC/SMC Busbars supports at required Intervals complete for cross section, size supports & their spacing etc. for with standing fault level of 25KA for 1 sec. OUTGOING : 4 nos. 40A 415V, TP+N MCCB of 25KA with microprocessor based release having O/L, S/C protection & digital multi function (V+A+Hz ) with a set of cast resin CTs. 4 nos. 63A 415V, TP+N MCCB of 25KA with microprocessor based release having O/L, S/C protection & digital multi function (V+A+Hz ) with a set of cast resin CTs. 10 nos. 63 A 415V, TP+N MCB of 25KA Thermal Protection . 10 nos. 40 A 415V, TP+N MCB of
25KA Thermal Protection .
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%