Mussoorie Dehradun Development Authority Tender

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand)

Brick work in plain arches in superstructure above plinth level and upto floor five level including centering and shuttering complete for span up to 6 metres with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:3 (1 cement : 3 coarse sand).

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Centering and shuttering including strutting, propping etc. and removal of form work for :

Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.

Reinforced cement concrete work in arches, archribs, domes, vaults, shells, folded plate and roofs having slope more than 15° up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

Columns, Pillars, Piers, Abutments, Centering and shuttering including strutting, propping etc. and removal Posts and Struts

Providing and fixing double scaffolding system (cup lock type) on the exterior side ofbuilding/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metrecentre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approvalof Engineer-in-charge. Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only for execution of all items for such works.

Providing & fixing fly proof wire gauze to windows, clerestory windows &doors with M.S. Flat 15x3 mm and nuts & bolts complete.Stainless steel (grade 304) wire gauze of 0.5 mm dia wireand 1.4 mm aperture on both sides

Providing and fixing angle iron frames for doors, windows and ventilatorsof mild steel Angle sections of size 35x35x5 mm, joints mitred andwelded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existingT-iron frame or to the wall with dash fastener, including fixing of necessarybutt hinges and screws and applying a priming coat of approved steelprimer, all complete as per the direction of Engineer-In-charge

CEMENT PLASTER WITH A FLOATING COAT OF NEAT CEMENT 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix1:4 (1 cement: 4 fine sand)

18 mm thick plain cement mortar bands in cement mortar 1:4 Moulded Band

Finishing walls with water proofing cement paint of required shade :New work (Two or more coats applied @ 3.84 kg/10 sqm)

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied@ 2.20 kg/10 sqm)

Providing of ‘Unistone’ Glass Reinforced Concrete (G.R.C) Wall Cladding Tiles “Country Stone – 15mm thick” in approved design, size 230mm X 75mm, texture, thickness, pattern and color. The thickness of the tiles should range between 12 to 18 mm (depending on the texture of the tile), allowing variance of ±2 mm in accordance with IS: 1237‐1980. The composition of tiles should be ‘43’ Grade Portland cement, reinforced with Alkali Resistant Glass Fiber and homogeny pigmentation should be done with exterior grade synthetic inorganic iron oxide pigments manufactured by BAYFERROX / Lanxess (Germany)’ or equivalent. The pigmentation should be homogeneous and in accordance with British Standards BS EN 12878:1999. The other additives should be fine washed graded quartz, super plasticizers and integrated water proofing agents and others. The tiles should be produced with high vibration technology and concrete mix design compressive strength equivalent to M‐40 Grade@28 days. The top surface of the tiles should be sealed with acrylic lacquer resulting in surface water absorption of tiles, less than 1% and water absorption by 24 hrs. immersion method, less than 8%. The tiles should be applied on a rough plaster of 1:3 cement mortar 1:3 (1 cement: 3 coarse sand) and the fixing of tiles should be done by ‘Unistone’ tile adhesive or equivalent as per manufacturer’s laying instruction.

Providing of UniStone glass reinforced concrete (G.R.C) exterior paving tiles in 'Cobble stone' finish in approved shade in sizes of 152mm x152mm. The thickness of the tiles should range between 20 to 22 mm, allowing variance of ± 5mm in accordance with IS: 1237- 1980. The tiles should be made with M- 40 Grade concrete mix design having ’43’ grade Portland cement, reinforced with Alkali Resistant glass fiber and the pigmentation should be done withexterior grade synthetic inorganic iron oxide pigments manufactured by ‘BAYFERROX (Germany)’ or equivalent with high vibrationtechnology. The pigmentation should be homogeneous and in accordance with British standard BS EN 12878:1999. The otheradditives should be fine washed graded quartz, super plasticizers and integrated water proofers agents and others. The tiles should be produced with high vibratory technology and their concrete mix design compressive strength should be of M-40 grade@28days. The top surface of the tiles should be treated with acrylic lacquer resulting in top surface water absorption of less than 1% and water absorption of less than 8% by 24 hours immersion method. The beds where tiles are to be laid should be clean, debris free, wet and mopped. The tilesshould be laid to 1:4:8 PCC Concreting with cement mortar of 20mm thickness made with (1:3) Cement: Coarse Sand, adequate grooves should be maintained between 8-10mm using spacers and pointingwork to be done with 1:3 (Cement: Fine Sand) mix

Stone work, plain in copings, cornices, string courses and plinth courses, upto 75 mm thick in Cement mortar 1:6 (1 cement : 6 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade. Red sand stone

Supply of UniStone Fibre reinforced Polymer (FRP) Self-watering Planters in approved size, pattern, thickness and shade size 1200x1000mm

Supply of UniStone Fibre reinforced Polymer (FRP) Self-watering Planters in approved size, pattern, thickness and shade Size800x670 mm

Supply and installation of Shop front signage made with 4mm thick ACP boxing with MS frame structure in 25x25 mm MS tube finished in powder coating with approved color. Text in lit acrylic letter laser cut and fit on to ACP box with required LED module and driver of IP 67 or above rating. Additional MS tube frame in 50x50 mm finished with powder coating fixed around the signage board as a boarder Size : 1800 x 600 x 100 mm ACP CODE : MA-04-Beton Copper or CS-05-Rugged Orange or CS-06-Rugged Brown Make : ALUDECOR or EQUIVALENT mating the code Cost includes packaging,Transportation & Installation

Supply and installation of Shop front signage made with 4mm thick ACP boxing with MS frame structure in 25x25 mm MS tube finished in powder coating with approved color. Text in lit acrylic letter laser cut and fit on to ACP box with required LED module and driver of IP 67 or above rating. Additional Molding made with MS with paint finish made as per the artwork Size : 2400 x 600 x 100 mm ACP CODE : MA-04-Beton Copper or CS-05-Rugged Orange or CS-06-Rugged Brown Make : ALUDECOR or EQUIVALENT mating the codeCost includes packaging,Transportation & Installation

Supply and installation of Shop front signage made with 4mm thick ACP boxing with MS frame structure in 25x25 mm MS tube finished in powder coating with approved color. Text in lit acrylic letter laser cut and fit on to ACP box with required LED module and driver of IP 67 or above rating. Additional Molding made with MS with paint finish made as per the artwork Size : 2400 x 600 x 100 mm ACP CODE : MA-04-Beton Copper or CS-05-Rugged Orange or CS-06-Rugged Brown Make : ALUDECOR or EQUIVALENT mating the code Cost includes packaging,Transportation & Installation

Supply and installation of Orientation signage including necessary civilwork, footing & foundation. Super structure made with brick wall with exposed masonry work. Information panel is in 4 mm SS (403) sheet with content in UV printing with clear coating on top. Lighting arrangement on top with Linear LED profile with arequired power supply of IP67 and above rating and supplied with aall necesary fittings.Main power supply till point is not in the scope of vendor and is to be made available at the desired locations by the client. Logo to be made with laser cut MS sheet and fixed with required arrangement on the stone masonry Size : 1200 x 750 x 30 mm Cost includes packaging,Transportation & Installation

Supply and installation of Historic signage -2 Sided made with 4mm thick ACP boxing with MS frame structure in 20x20 mm MS tube finished in powder coating with approved color fixed with help of Solid MS bracket as per design and finsihed with paint of approved color. Not lit Text in 3 mm thick MS sheet with Laser cutting and paint finish fixed on to the ACP box on both sides. Size : 600 x 500 x 30 mm ACP CODE : MA-04-Beton Copper or CS-05-Rugged Orange or CS-06-Rugged Brown Make : ALUDECOR or EQUIVALENT mating the code Cost includes packaging,Transportation & Installation

Supply and installation of Facility signage -2 Sided made with 4mm thick ACP boxing with MS frame structure in 20x20 mm MS tube finished in powder coating with approved color fixed with help of Solid MS bracket as per design and finsihed with paint of approved color. Lit Text / symbols made with laser cut on ACP and lighting arrangement inside with required LED and power supply of IP67 or above rating. Size : 500 x 500 x 100 mm ACP CODE : MA-04-Beton Copper or CS-05-Rugged Orange or CS-06-Rugged Brown Make : ALUDECOR or EQUIVALENT mating the code Cost includes packaging,Transportation & Installation

Supply & install Vertical free-standing digital signag e made with stainless-steel sheets of minimum 1.5mm thickness and mounted on a mild steel frame made of 14 gauge pipes and installed on ground by means of MS base plate of minimum 15mm thickness, which will be fastened to a cement concrete foundation with anchor rods/bolts. The display screen to be of 55" Size and include a toughened glass for protection.The panel is designed to create a partial enclosure or a roof to keep the screen protected from external forces made in stainless-steel frame with acrylic or metal roofing and side covers.Signage tobe supplied with necessary electrical arrangement with IP 67 and above rating. Main power supply till point is not in the scope of vendor and is to be made available at the desired locations by the client. This provision includes the requirement of internet if required. The supply includes all manufacturing warranty (not Vendors) as extended by the OEMs. Fabrication warranty of 1 year fromthe date of commissioning is included int he cost. Size : W900 x H2200 mm Cost includes packaging,Transportation & Installation

Building Plinth area

Roofing

Minor Plaster /Patchwork : Minor Structural repair like plaster 1:6 (1 cement: 6 coarse sand) Smoothening of surface Surface after applying plaster & sanding machine ( if needed ) Minor plaster works / Patchworks at 1:6 (1 cement: 6 coarse sand) including ladders / scaffolding etc. complete as per directions of Engineer in charge.Upto a height of 3 metre

Base Preparation for artwork : Preparation & Finishing walls with Premium Acrylic Smooth exterior paint (Two or more coats ) with Silicone additives of required shade . Priming coat of premium exterior primer of reputed manufacturerof with high color fastness rating to withstand outdoor conditions is required to cover existing dark or bold color on the wall or to reseal an unpainted porous surface including ladders / scaffolding etc. complete as per directions of Engineer in charge.Upto a height of 3 metre

Artwork Generation & Art Painting : Recci, Designing , generating mockups and submission of Presentations in printed form with site specific details and challenges ( if any ) / via email for approval from design approval commitee to be in scope of the Agency . The Works should be designed considering the real time dimensions and scaling of the areas and locations identified. Painting of approved artwork by proffessional artists with Premium Acrylic Smooth exterior paint of required shades of reputed manufacturer with high color fastness rating to withstand outdoor conditions . Use of spray cans / Stainers of reputed manufacturer is allowed (with proper disposal mechanism of the same) including ladders / scaffolding etc. complete as per directions of Engineer in charge.Upto a height of 3 metre

Varnishing : Top Coat over artwork to preserve the life and also to provide the grace / required lusture with a protective layer for easy cleaning of the artworks . Prior test & observation on wall with thorough process to be done before application . Varnishing with varnish of approved brand and manufacture One or more coats as per recommendation of the paint manufacturer . Responsibility of chipping of artwork / flaking due to varnish will be of the agency including ladders / scaffolding etc. complete as per directions of Engineer in charge.Upto a height of 3 metre