Mussoorie Dehradun Development Authority Tender

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied@ 2.20 kg/10 sqm)

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Minor Plaster /Patchwork : Minor Structural repair like plaster 1:6 (1 cement: 6 coarse sand) Smoothening of surface Surface after applying plaster & sanding machine ( if needed ) Minor plaster works / Patchworks at 1:6 (1 cement: 6 coarse sand) including ladders / scaffolding etc. complete as per directions of Engineer in charge.Upto a height of 3 metre

Base Preparation for artwork : Preparation & Finishing walls with Premium Acrylic Smooth exterior paint (Two or more coats ) with Silicone additives of required shade . Priming coat of premium exterior primer of reputed manufacturerof with high color fastness rating to withstand outdoor conditions is required to cover existing dark or bold color on the wall or to reseal an unpainted porous surface including ladders / scaffolding etc. complete as per directions of Engineer in charge.Upto a height of 3 metre

Artwork Generation & Art Painting : Recci, Designing , generating mockups and submission of Presentations in printed form with site specific details and challenges ( if any ) / via email for approval from design approval commitee to be in scope of the Agency . The Works should be designed considering the real time dimensions and scaling of the areas and locations identified. Painting of approved artwork by proffessional artists with Premium Acrylic Smooth exterior paint of required shades of reputed manufacturer with high color fastness rating to withstand outdoor conditions . Use of spray cans / Stainers of reputed manufacturer is allowed (with proper disposal mechanism of the same) including ladders / scaffolding etc. complete as per directions of Engineer in charge.Upto a height of 3 metre

Varnishing : Top Coat over artwork to preserve the life and also to provide the grace / required lusture with a protective layer for easy cleaning of the artworks . Prior test & observation on wall with thorough process to be done before application . Varnishing with varnish of approved brand and manufacture One or more coats as per recommendation of the paint manufacturer . Responsibility of chipping of artwork / flaking due to varnish will be of the agency including ladders / scaffolding etc. complete as per directions of Engineer in charge.Upto a height of 3 metre

Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) :Raised and cut pointing

Extra for pointing on walls on the outside at height more than 10 m from ground level for every additional height of 3 m or part there of.

Flex boards (size 4.5m X 3.0m) Flex used will be 260 GSM Jindal or Equivalent. Frame For the Boards Made of 0.03175 mtr. Square pipe 2 Nos. M.S ( 0.0762 mtr. Squre Pipe ) Poles, :Length 16 Ft with reection at site

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately). All works upto plinth level

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars

Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)

Brick work with common burnt clay selected F.P.S. (non modular) bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete incement mortar 1:6 (1 cement : 6 coarse sand) Above plinth level upto floor V level

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shade Area of slab over 0.50 sqm

15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retainingwalls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. For vertical surface two coats @ 0.70 kg per sqm