Mussoorie Dehradun Development Authority Tender

Supply, installation, testing and Commissioning of IP67 5Core T Type 5C DMX cable connectors. Approved Make :Philips Color kinetics / Wipro/Iguzzini/Ligman Lighting.Aprroved Makes Wipro , Philips , Ligman,Havells And Bajaj

Supply of Dynamic Colour Changing 4 Mtr long flexible RGB LED PU Coated Strip light with IP67 protection suitable for outdoor applications. Strip should have 14W per meter. The LED Strip should have integrated aluminium C channel for mounting. Fixture should be able to work ambient temp range of 0degC to +45degC and should be theft proof type. The LEDs used should be with RGB CCT, the Fixture should have Dotless Homogenous Light source with integrated diffuser as part of striplight for better rugedness and diffused illumination with low glare and DOT free illumination.Luminaire should be capable of operating at 24VDC , Driver, and controller should be with same make. The luminaire shall be compatible with DMX512 controller. Following certifications/reports to be submitted: product data sheets, LM79 report from NABL accredited lab, illuminance diagram, polar curve & LM80 report issued by LED manufacturer and type test reports with BIS certificate.Fixture, driver and other accesories should be of same make.The luminaire shall be supplied with necessary connectors for connecting lead/jump cables & necessary endplates/covers. Approved Make : Wipro , Philips , Ligman,Havells And Bajaj

Supply of 4 Channel DMX Controller with 24V DC Output. It can be programmed to give 15 kind of different Lighting conversion. DMX Controller shall be able to control the color designation, speed of conversion & brightness.IT should be ideal for connection of 5C/4C cable (V + RGB) ). System can be expanded indefinitely with 9841 cable & should Use the DIP switch to set the IP address for 512. The Controller shall provide max. output at 24 V DC. Approved Make : Wipro , Philips , Ligman,Havells And Bajaj

Supply, Installation, Testing and commissioning of DMX Master Controller, with completely made in India product. A stand alone interface for installation in electrical DIN Cabinets with Din rails, which can control from 512 to 1024 and can go up to 2048 channels on 1, 2 or 4 DMX universes. A robust Stand Alone mode and a wide range of trigger possibilities (RS232, Contacts, Clock, NODE x4 ports, Master/slave), USB-C Networks Ethernet, Internet, WIFI compatible when connected to a router Multiple Zone 10 Zone, play 10 scene/sequence per time in Stand Alone ,Memory of Micro SD Card ( max. 256 GB ) and 8Mb Internal memory . Art-Net and sACN from SD card, including triggers (2x512). A master / Save Synchro (32 max wired / 128 max Ethernet) that Commands from the Contacts (speed, scene, dimmer, zone). Default start scene, Scene priority, Cross Fade time between scenes , Automatic Scene Recovery if the power is cut off and 16-bit and fine channel management. Triggers options of RS232 In/Out (16 characters max for RS232 triggers, commands or orders) and UDP / Ethernet triggers and commands (from SDK). Software Requirements with System Compatibility of Windows, Mac, iOS. Flexible, adaptable mounting options ,Should be provided with light show authoring software, Direct line voltage power supports 100—240VAC,Minimum five configurable effects, Using light show authoring software to select from standard five effects, adjust effect settings such as color, speed, and brightness. Brand name shall be embossed on each and every lighting fixtures. Approved Make: Philips / Wipro/Ligman Lighting/ Havells/Bajaj

Supply of Amplifier/Splitter with 6-output DMX splitter with DMX signal boosting. This unit takes the incoming DMX signal and splits the signal into six separate output channels allowing for expanding the number of devices controlled from 32 to 6X32. Power consumption should not be more than 5W. The Compact signal amplifier shall support optically/magnetic isolation protection, protects the controllers and ensures that the DMX signal can be normally transmitted to various luminaires, improving the reliability and stability of the entire control system. The controller shall be compact in size & shall be minimum IP20 rated. Amplifier should be able to amplify the signal for up to 200m.The amplifier shall have male-female XLR connectors. On the input & output side the amplifier shall have cable with IP67 6-Pole XLR connector. Housing - MS/Aluminum The output terminals are optically isolated from the input and share a common ground reference. All six output ports have an independent output driver and ELV transformer to boost the DMX signal. 1: 6 Way DMX Splitter/Booster ,Optically isolated DMX Input/Outputs Individual coil transformer for each output , Surface/Rack/Floor/Celling mountable with provide mounting accessories Refined and filtered data Cable 3 core 0.75sq.mm cable. Approved Make : Wipro , Philips , Ligman,Havells And Bajaj

Supply of WL-Button 6 Flush-mounting wall panel 6 dry Button panel with a 16 port connection. Button system should have trigger to control light with responsive, reactive programming. Approved Make : Wipro , Philips , Ligman,Havells And Bajaj

Programming Charges , Installation and Testing Charges including accessories required for same Viz, Cabel, Junction Boxes