Mussoorie Dehradun Development Authority Tender
View complete overview of Uttarakhand MDDA Tender
Mussoorie Dehradun Development Authority - MDDA Tender
Civil And Construction
Civil Works Others
Eprocure
Opening Date30 Aug 2024
Closing DateCancelled
Tender Amount₹ 1,14,85,59,938
Costs
EMD
₹ 1,40,00,000Document Cost
₹ 5,900Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MDDA_75104_1Bid Award Id
ViewTender No
372/DEVELOPMENT WORK/T.N./2024-25 DT. 6.08.2024Tender Authority
Mussoorie Dehradun Development Authority ViewPurchaser Address
-Website
http://uktenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
All kinds of soil
41161
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
-
-
-
All kinds of soil.
447
-
-
Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, depth upto 1.5 m, including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layers by ramming, watering etc., stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50 m :
-
-
-
All kinds of soil : Pipes, cables etc. not exceeding 80 mm dia
500
-
-
All kinds of soil : Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia
300
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
1375
-
-
Excavating, supplying and filling of local earth ( including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundations and over areas etc. complete.
1000
-
-
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.
-
-
-
All kinds of soil
48388
-
-
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
1424
-
-
Supplying chemical emulsion in sealed containers including delivery as specified.
-
-
-
Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
85
-
-
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti- termite treatment (excluding the cost of chemical emulsion) :
-
-
-
Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete:
-
-
-
With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration
379
-
-
Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.:
-
-
-
With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration
379
-
-
PLAIN CEMENT CONCRETE WORK
-
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
515
-
-
Providing and laying in position ready mixed or site batched design mix cement concrete for plain cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/Ordinary Portland /Portland Slag cement, admixtures in
recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge; for the following grades of concrete.
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the minimum specified cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
-
-
-
All works upto plinth level :
-
-
-
Concrete of M10 grade with minimum cement content of 220 kg /cum
255
-
-
Concrete of M15 grade with minimum cement content of 240 kg /cum
100
-
-
All works above plinth and upto floor V level :
-
-
-
Concrete of M-10 grade with minimum cement content of 220 kg /cum
100
-
-
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
130
-
-
REINFORCED CEMENT CONCRETE WORK
-
-
-
Notes and Conditions for the boq items under subhead Reinforced cement concrete work:
-
-
-
(The rates for all items under this section to include)
-
-
-
Work at all heights, levels, depths and locations, unless otherwise mentioned and Work in narrow widths, Piece meal/ small work, screeding under floor etc
-
-
-
Approved makes of REINFORCEMENT STEEL-TMT BARS-FE-500D GRADE are TATA STEEL, JSW, SAIL, RINL, JSPL and for Rebar Coupler HALFEN-MOMENT, SPPLICETEK, USHA MARTIN, G-TECH and for cement ULTRATECH, ACC, LAFARGE, SHREE CEMENT, AMBUJA, J.K.
-
-
-
Generally all concrete work shall be as per IS-456 (latest edition) and CPWD specifications characteristic strength (28 days) shall be 20 N/sq. mm, 25 N/Sq mm, 30 N/Sq mm and 35N/sqmm as may be specified on drawings. The rate of all items to include for mix designs for various strengths and workability and routine cube testing at various stages for strength as required. Cost of concrete admixtures is included in the quoted rates, the use of which shall be approved by the Project Manager. The rates shall include for providing all materials, mixing, placing, compacting, cutting, finishing, placing inserts, holding down bolts and flanges, sleeves, puddle flanges, embedding all services pipes, boxes, hooks etc. as shown in drawings at correct location level with required changes in form work, reinforcement etc., complete. All RCC works and all concrete shall be machine vibrated. Formwork and reinforcement are measured separately. All concrete shall be with 20mm and down graded nominal size stone aggregates except specified otherwise. Curing of the concrete shall be as per IS-456 (Latest Edition).
-
-
-
All staging upto any height and scaffolding work shall comprise of MS Pipes/ Structural steel sections with necessary coupling arrangement. (NO WOODEN BALLIES / PROPS WILL BE PERMITTED). Adequate size foundation blocks / base plates shall be provide below staging members to disperse the loads as per the founding strata
-
-
-
Contractor shall set up on site concrete pump, hoists, tower cranes, passenger elevator, automatic microchips controlled Batching plant of capacity 30 cum per hour or more (min. 2 nos.) complete with silos/ stock piles for cement and aggregates, and also a D.G. set to be provided for uninterrupted supply of concrete. Use of batching plant/RMC for all concrete work is mandatory
-
-
-
The rate of reinforcement work shall include for handling/ storing clearing of rust, straightening, bending and placing, binding, fixing in proper position at any height/level with 18 gauge annealed binding wires, necessary chairs, spacer bars, wastage and cement mortar cover blocks at proper positions to maintain proper cover as per IS-456 (Latest Edition). Reinforcement shall be bent in accordance with IS-2502
-
-
-
Holes and openings in RCC slab/walls, parapet, masonry works, pockets in machine foundation, beam, parapets, for rainwater pipe or spouts and plumbing pipes shall be left at the time of concrete casting or raising masonry and making good after fixing fixtures
-
-
-
Providing grooves, drip moulds, moulds, chamfers, curved surfaces, and ornamental works in RCC members as per drawing and finishing to specified shape and Leaving dowels for anchorage of brickwork and other RCC members
-
-
-
Use of plasticiser / super plasticiser (approved by Project Manager) and / or additional cement for pumpable concrete
-
-
-
Mix designing and testing of all the ingredients of concrete from Indian Institute of Technology for each grade, pumpable & non-pumpable concrete
-
-
-
Centering and shuttering including strutting, propping etc. and removal of form for
-
-
-
Foundations, footings, bases of columns, etc. for mass concrete
923
-
-
Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
18114
-
-
Suspended floors, roofs, landings, balconies and access platform
78
-
-
Shelves (Cast in situ)
100
-
-
Lintels, beams, plinth beams, girders, bressumers and cantilevers
642
-
-
Columns, Pillars, Piers, Abutments, Posts and Struts
11366
-
-
Extra for shuttering in circular work (20% of respective centering and shuttering items) for walls
11898
-
-
Stairs, (excluding landings) except spiral-staircases
2006.2
-
-
Edges of slabs and breaks in floors and walls
-
-
-
Under 20 cm wide
17578
-
-
Above 20 cm wide
63
-
-
Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured).
-
-
-
Suspended floors, roofs, landing, beams and balconies (Plan area to be measured)
23571
-
-
Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick
29720
-
-
Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick
18639
-
-
Extra for exposed concrete surface of ramp slab soffit and side beam over basic item rate i/c cost of making grooves as per plan / elevation ( plan area shall be measured).
3450
-
-
Extra for exposed concrete surface of ramp shear wall over basic item rate for walls i/c cost of making grooves as per plan / elevation ( elevation area shall be measured) for radius 5.3 m.
2504
-
-
Extra for exposed concrete surface of ramp shear wall over basic item rate for walls i/c cost of making grooves as per plan / elevation ( elevation area shall be measured) for radius 9.8 m.
412
-
-
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
42
-
-
Providing and fixing up to floor five level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc., including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required Centering complete.
-
-
-
1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources)
10
-
-
Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
10
-
-
Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in small lintels not exceeding 1.5m clear span up to floor five level, including the cost of required centering, shuttering but , excluding the cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
10
-
-
Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in lintels, beams and bressumers, including setting in cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering and shuttering but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
10
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
Thermo-Mechanically Treated bars of grade Fe-500D or more.
729751
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
-
-
-
Thermo-Mechanically Treated bars of grade Fe-500D or more.
1834996
-
-
Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of approved make from factory/workshop to construction site including placing in position and binding all complete above plinth level.
-
-
-
Thermo-Mechanically Treated bars of grade Fe-500D or more.
8257
-
-
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
-
-
-
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
-
-
-
All works upto plinth level
-
-
-
Concrete of M25 grade content of 330 kg /cum with minimum 25% of flyash of total cement component as per GRIHA requirement. Fly ash confirming to grade I of IS:3812 (Part 1)
718
-
-
Concrete of M30 grade content of 350 kg /cum with minimum 25% of flyash of total cement component as per GRIHA requirement. Fly ash confirming to grade I of IS:3812 (Part 1)
4641
-
-
Concrete of M40 grade content of 390 kg /cum with minimum 25% of flyash of total cement component as per GRIHA requirement. Fly ash confirming to grade I of IS:3812 (Part 1)
237
-
-
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
-
-
-
All works above plinth level upto floor V level
-
-
-
Concrete of M25 grade content of 330 kg /cum with minimum 25% of flyash of total cement component as per GRIHA requirement. Fly ash confirming to grade I of IS:3812 (Part 1)
8721
-
-
Concrete of M30 grade content of 330 kg /cum with minimum 25% of flyash of total cement component as per GRIHA requirement. Fly ash confirming to grade I of IS:3812 (Part 1)
125
-
-
Extra for R.C.C./ B.M.C/ R.M.C. work above floor V level for each four floors or part thereof.
3216
-
-
Providing and fixing parallel threaded couplers conforming to IS code on “Reinforcement Couplers for Mechanical Splices of Bars for Concrete Reinforcement - Specification”, to reinforcement bars including threading, enlargement at connection by forging, protecting the prepared reinforcement bars and related operations as required to complete the works per direction of Engineer- in-Charge.
-
-
-
Coupler for 20 mm diameter reinforcement bar
2700
-
-
Coupler for 25 mm diameter reinforcement bar
40
-
-
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
108
-
-
Extra for addition of synthetic Polyester triangular fibre of length 12mm,effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement concrete/RCC/Flooring/water retaining structures by using of 125gms of synthetic Polyester triangular fibre for 50 Kg cement used cement as per directions of Engineer-in-Charge.
100
-
-
Providing & fixing Rebar in concrete by drilling of holes of requisite size and depth, brushing , blowing out dust and fixing of rebar by applying injectable mortar at any height all complete as per instructions of engineer In-charge -10 mm Dia rebar with hole dia 14 mm & 100 mm depth
100
-
-
BRICK & BLOCK WORK
-
-
-
Notes and Conditions for the boq items under subhead Brick and Blockwork:
-
-
-
(The rates for all items under this section to include)
-
-
-
Work at all heights, levels, depths and locations, unless otherwise mentioned and Keeping the work well wetted for ten days
-
-
-
Approved Make for AAC Blocks are ULTRATECH XTRALITE, SHREE CEMENT, JK, ASCOLITE, BILTECH, MAGICRETE, INDO BHUTAN, BIRLA AEROCON, J.K. LAKSHMI, TISCO BUILD
-
-
-
All scaffolding, platforms, ladders, staging and plant required in the execution of work to any height or depth and lift.
-
-
-
Hacking and roughening of concrete or other surfaces in contact with masonry for bondage and Leaving out dowels from concrete members for anchorage
-
-
-
Forming chases for edges of concrete floors or other units, for sealing in or other waterproofing layers etc
-
-
-
Holes (cut and formed or left), for fixing pipes, bolts and other inserts and making good including grouting if necessary
-
-
-
Any efflorescence observed in Brick Work should be watched on with clean water and treated with such chemicals as are deemed necessary by Project Manager. The Brick Work shall be dismantled if deemed necessary by Project Manager and rebuilt with new bricks including making good all disturbed and damaged work
-
-
-
Providing & laying of Hoop Iron as per specifications (Material paid separately)
-
-
-
Rate to include for any shapes, fins, projections, shafts, Work in narrow widths, Piece meal/ small work etc. Peace meal work necessitated by coordination & requiring of work of other agencies
-
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)
94
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure in: Cement mortar 1:6 (1 cement : 6 coarse sand) above plinth level upto level V
13
-
-
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in cement mortar 1:4
23
-
-
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.ird course of half brick masonry.
23
-
-
Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in :
-
-
-
Cement mortar 1:6 (1 cement : 6 Coarse sand)
20
-
-
Half brick masonry with non modular fly ash bricks of class designation 10, conforming IS :12894, in super structure above plinth and upto floor V level.
-
-
-
Cement mortar 1 : 4 (1 cement : 4 coarse sand)
374
-
-
Providing and laying Autoclaved Aerated concrete (AAC) blocks masonry 150mm/200mm/300 mm thick with Grade- I AAC blocks below plinth level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for separately).
277
-
-
Providing and laying Autoclaved Aerated concrete (AAC) blocks masonry 150mm/230mm/300 mm thick with Grade- I AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for separately).
1716
-
-
Providing and laying Autoclaved Aerated concrete (AAC) blocks masonry 100 mm/ 125 mm thick with Grade- I AAC blocks of density 551 to 650 Kg/ cum conforming to IS: 2185 (Parts-3) below plinth level in cement mortar 1:4 (1 cement : 4 coarse sand). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work.
10
-
-
Providing and laying Autoclaved Aerated concrete (AAC) blocks masonry 100 mm/ 125 mm thick with Grade- I AAC blocks of density 551 to 650 Kg/ cum conforming to IS: 2185 (Parts-3) in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work.
56
-
-
Extra for Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in staircase steps in: Cement mortar 1:4 (1 cement : 4 coarse sand) in place of CM 1:4 for all levels and heights as per the direction of Engineer-in-Charge
100
-
-
Providing and fixing of chicken/ fiber mess in AAC block and RCC joint as per instruction of engineer in charge
10000
-
-
CLADDING WORK
-
-
-
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
-
-
-
Granite stone slab all colour and texture except black, Cherry/Ruby red -Area of slab over 0.50 sqm
180
-
-
Extra for fixing marble/granite stone, over and above corresponding basic item, in facia and drops of width upto 400 mm fixed to 12mm thick BWP Grade Plywood backing of approved make with epoxy resin based adhesive all as per drawings, including cleaning etc. complete for all levels and all heights.
43
-
-
Providing edge molding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. -Granite work
3519
-
-
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
34
-
-
Porcellian Tiles
-
-
-
Providing and fixing Ist quality porcelain wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. - wall tiles size 300x 300mm
100
-
-
Granite wall lining/dado
-
-
-
Providing and fixing machine cut, pre-polished, Granite stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete for all levels and all heights as per Architectural drawings, and as directed by the Engineer-in-Charge.
-
-
-
18mm thick Polished Granite stone slab Jet Black, Galaxy black, Alaska White, Titanium White, Imperial white, River white, Colonial Whie, Kashmir Gold, Crystal Yellow, Cherry Red, Elite Brown, Cat Eye, Bash Paradiso, Adhunik Brown, Chiku Pearl or equivalent
-
-
-
Skirting, Riser of Steps upto 150mm height
401
-
-
Wall Dado
832
-
-
Providing and fixing Leather finish Granite stone as per approval, 18mm thick in dado on walls, in required design and pattern wherever required, fixed with stone fixing adhesive i/c jointing with polymer based pigment of matching shade, edge polishing etc. all complete for all levels and all heights as per Architectural drawings, and as directed by the Engineer-in-Charge.
-
-
-
18mm thick Leather finished Granite stone slab Jet Black, Galaxy black, Alaska White, Titanium White, Imperial white, River white, Colonial Whie, Kashmir Gold, Crystal Yellow, Cherry Red, Elite Brown, Cat Eye, Bash Paradiso, Adhunik Brown, Chiku Pearl or equivalent
2277
-
-
Providing and laying Leather finish Italian stone 18mm thick in dado on walls fixed with stone fixing adhesive i/c jointing with polymer based pigment, edge polishing
10
-
-
Extra for making groove in granite / Engineered marble stone edge i/c polishing, size 5mm wide and 5mm deep in dado.
1585
-
-
Extra for champhering of granite / Engineered marble stone edge i/c polishing of skirting
500
-
-
Providing and fixing polished brass inlay strip in Granite/Marble wall cladding of size 8mm x 18mm fixed with adhesives complete as per drawings for all levels and all heights as per the direction of Engineer-in-Charge
500
-
-
Italian Marble Cladding
-
-
-
Providing and fixing machine cut, mirror/ eggshell polished, Marble stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge.
-
-
-
18 mm thick Italian/Imported Marble stone slab, Perlato (Royal / Sicilia / Italian), Italian Dyna, Botticino, Crema Marfil, Bianco/Natural/Atlantic Beige, Rosso Verona, Light and Dark Emperadore, Armani Brown, Travertine etc.
21
-
-
6mm th HPL Compact
-
-
-
Providing and fixing solid FR grade 6 mm thick Compact High-Pressure Laminate of GREENLAM / FUNDERMAX / MERINO make manufactured under high pressure and temperature with bunch of Kraft papers and decorative papers made of Alpha Cellulose Fibre impregnated with thermosetting synthetic resins, fixed using an aluminum support profiles and a top covering profiles made of powder coated or anodized aluminum as per the detailed drawings. Compact laminates should have the characteristic of flame retardant fulfilled the criteria of under BS-476/97 and EN438-6 with classification of BS1D0 standard property, Anti-bacterial and anti-termite property under JIS Z2801:2000, Chemical resistance, Moisture and Steam resistant, Heat and cigarette burn resistant, Scratch resistant, fire resistance, color change resistant, weather & climatic shock resistance.
81
-
-
The contractor should provide 10 years warranty certification from the original manufacturer on any manufacturing and moisture related defects. The compact laminates should be resistance to water immersion through permissible increase on thickness and mass 0.60% and board should have density 1.35kg/cm3 and fulfilled the criteria of FSC and Green Guard Gold certification for low VOC emission and manufactured under EN438-2&3:2005 standard. Finish and colour of compact laminates should be finalized under direction of Engineer–in-charge. Compact laminates should be installed on smooth finished plastered and black painted surface in plumb using 25x50x1.6 mm aluminum tube size fixed at 600mm c/c with the help of aluminium angle cleats/brackets under desirable height and fixed through same compact colour 5mm dia rivets or compact adhesive as per recommended by compact supplied agency. Finish and colour of Interior clade should be approved under engineer-in-charge direction. Installation should be generally be carried out as per the original manufacturer's recommendation if any in writing. No horizontal groove/joints to be provided unless otherwise mentioned in drawings. Minimum 2/3mm spacer groove to be provided in vertical joints between two sheets or as per drawings and filled with silicon sealant with backer road of approved brand or provided with T-shaped metallic strip (SS 304 brush finished or Aluminum powder coated in desired shade and finish) fixed with suitable adhesive to cover the joint as per the recommendation and approval of Architects and Engineer-in-charge. Rates: All-inclusive as per above to execute the item for all heights and all levels.
-
-
-
Engineered Marble Vanity Counter
-
-
-
Providing and fixing 18mm thick solid Engineered Marble Counter for kitchen / vanity / Toilet etc., Marble sheet (approved size, shade, colour & texture) to be paste with cement based high polymer modified quick-set tile adhesive (Water based) laid over 19 mm ply base platforms, including rubbing, moulding, polishing to edges to give high gloss finish, shape for wash basin / sink in platform & holes for pillar taps etc. to be complete as per direction of Engineer in charge.
(Area to be measured top, facia and drops of Counter Etc.)
4
-
-
WOOD WORK
-
-
-
(The rates for all items under this section to include)
-
-
-
a) The item door / window frames shall include sealing the joints all round the brick work / concrete / block masonry and doors or windows with approved mastic filler or by any other approved means, by the Contractor at his own cost all as directed by the Engineer-in-Charge to make the joints water tight.
-
-
-
b) The work contemplated under the item for supplying and fixing the windows / door frames shall be got done by the Contractor through specialised agencies in the field, approved by the Engineer-In-Charge.
-
-
-
c) One sample, each of the door frame, shutter and window with all fittings and fixtures along with locking arrangement including glass panes etc. complete as per schedule of quantities, drawings and specifications shall be submitted by the Contractor for preliminary inspection of Engineer in charge before procurement on large scale. After the preliminary inspection, the sample shall be fixed at site to ascertain its performance. Large scale manufacturing shall be taken up only after rectification of defects etc. to the full satisfaction of the Engineer-in-charge and after obtaining formal approval from the Engineerin-charge.
-
-
-
d) Door frames, shutters and the windows to be supplied and fixed in position should cater the dimensional tolerance of the openings to an extent of + or -2%. The rates quoted by the tenderers shall hold good for such variations.
-
-
-
e) Test shall be conducted for the flush doors as per IS-2202-latest revision Part-I from each consignment and the cost incurred on this account shall be borne by the Contractor.
-
-
-
f) For bonding the flush doors, block boards, ply wood and all types of wood works, phenol formaldehyde synthetic resin type adhesives conforming to IS 848-1957 shall be used.
-
-
-
g) Mode of measurement shall be as per the specification.
-
-
-
Wood Work in Frames
-
-
-
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed single or double rebated and fixed in position with hold fast lugs or with dash fasteners of required dia & length as shown in drawing, with mitered joints including making necessary grooves, chamfering etc. complete as per drawing. (hold fast lugs or dash fastener shall be paid for separately).
-
-
-
Second class teak wood
1
-
-
Kiln seasoned and chemically treated hollock wood.
1
-
-
High Pressure Laminate
-
-
-
Providing & Fixing 1mm thick decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality on flush doors.
100
-
-
Flush Door
-
-
-
Providing and fixing ISI marked factory made, Factory Pressed 35mm thick Laminated BWP Grade Flush Door as per IS 2202 (Part1):1999, Green guard, GRIHA certified, E1 grade, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. providing structural strength and dimensional stability, immune to termites and borers, swell proof, slam proof, Bonded with Phenol Formaldehyde resin, Including 1mm Both Side High Pressure Laminate IS 2046 -95, 2nd class teakwood internal lipping battens fixed in jointed 2nd class teakwood internal lipping (battens) fixed in factory by using pneumatic gun, of depth not less than 25 mm on all edges of shutters. Joints in lipping shall not be allowed. Spacing of finger joints in wood as above shall not be less than 50cm. Both surfaces of shutters to be provided with 1.00 mm thick decorative high pressure laminated sheet in plain/ wood grain in gloss/matt/suede finish and shade as per approved with high density protective surface. Adhesive on reverse side of lamination sheet shall be as per IS: 2046 type S of approved (opening) within frame of door/cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS: 2202.
126
-
-
Width and height of the shutters shall be as shown in the drawings or as indicated by the Engineer in- Charge. All four edges of the shutters shall be square. The shutter shall be free from twist or warp in its plane. The moisture content in timbers used in the manufacture of flush door shutters shall be not more than 12 per cent when tested according to IS 1708.
-
-
-
Opening for Glazing (Vision Panel): When required by the purchaser opening for glazing shall be provided and unless otherwise specified the opening for glazing shall be 750 to 1350 mm in height and 150 mm to 200 mm in width unless directed otherwise. The bottom of the opening shall be at a height minimum 450mm or more from the bottom of the shutter or as per the drawings. Opening for glazing shall be lipped internally with Hard wood batten of width not less than 25 mm. Opening for glazing shall be provided where specified or shown in the drawing. Nothing extra shall be paid for this work.
-
-
-
Each leaf shall be hung on minimum of four hinges as shown in the drawings. Hinges shall be ISI marked 5 Knuckle, 2 Ball bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in SSS finish. Suitable for door weights, Template Drilled with necessary screws as per specification and direction of Engineer-in-Charge.
-
-
-
The contractor will submit a test report from the original manufacturer certifying all the above mentioned parameters including the guarantee of min 10 years from the original manufacturer. (Approved Make of flush shutter - MERINO / CENTURY / GREENPLY / KITPLY)
-
-
-
The rate shall be inclusive of cost of material and labour involved in all the operations described above complete for all heights and all levels as per the direction of Engineer-in-Charge. Glazing when provided shall be measured & paid for separately. Cost of all other hardware fittings other than the hinges to be paid for separately.
-
-
-
Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured): Rectangular or square
12
-
-
Extra if louvers (not exceeding 0.2 sqm) are provided in flush door shutters (overall area of door shutters to be measured).
-
-
-
Decorative type door
12
-
-
Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured).
20
-
-
Vision Panel in Flush Door
-
-
-
Providing & Fixing Vision panel with 6mm thick clear float glass of approved make and size 200(W) x 1200(H) mm as shown in the drawings in flush doors i/c cutting of glass, providing and fixing the glass with SS 304 hollow rectangular tube (15 mm x 10mm) beading in matt/brush finish as approved by the Architect with counter sunk ss screws, required gaskets complete for all levels and all heights as per the direction of Engineer-in-Charge.
5
-
-
Wooden Handrail
-
-
-
Providing and fixing 50mm dia second class polished teak wood railing fixed to existing SS / MS flat complete with mitered / butt / dove-tailed joints including making necessary grooves, chamfering, curving etc. complete as per drawing for all heights and levels as per the direction of Engineer-In-Charge.
1806
-
-
STEEL WORK
-
-
-
Notes and Conditions for the boq items under subhead Steel work:
-
-
-
(The rates for all items under this section to include)
-
-
-
Quoted Rates are for all heights, depths, levels, leads and lifts
-
-
-
MS Works
-
-
-
MS: The work shall be carried out using YST 310 grade Mild Steel conforming to IS:4923 and IS:1161 in general unless otherwise specified for all sections (square and rectangular hollow sections, hollow tubes, plates, cleats), nuts, bolts, fasteners, etc.
-
-
-
The contractor shall submit fabrication drawings for work involved based on construction drawings (that may be issued during construction period) for approval by the Engineer-in-Charge. The fabrication work shall start only after approval of the fabrication drawings. Any change required in the fabrication drawings shall be carried out at no extra cost.
Fabrication shall be in a perfect Architectural workmanship manner and as provided in Section V & VI of IS 800 & IS 7215. Welding shall be carried out by qualified welders. Electrodes for welding, the procedure, selection, test and inspection shall confirm to provisions in IS 816, IS 818, IS 822, & IS 833. Erection/ hoisting shall commence only after passing of fabricated parts by the Engineer-in-Charge.
-
-
-
SS / MS Railings - The Contractor to submit the shop drawing of the same including the fabrication details, calculations and stability report. The work to start only on written approval of the same by the Architects. Prototype samples / full size mockup at 1:1 scale to be prepared and installed at site by the contractor as per the drawings and specifications and to be approved by Engineer-in-charge / Architect before mass fabrication at no extra cost. The Contractor shall be responsible for taking exact measurements at site prior to fabrication and installation. He shall verify all measurements in consultation with the Consultant.
-
-
-
Stainless Steel: The work shall be carried out using AISI SS304 grade stainless steel for all sections (tubes, plates, cleats), nuts, bolts, fasteners, etc. The manufacturing of framework shall be carried out in workshop approved by Engineer-in-Charge. All material before being assembled shall be straightened, if necessary, unless required to be curvilinear form and shall be free from twist and shall be assembled in such manner that they are neither twisted nor damaged.
-
-
-
TIG welding to be adopted for SS works (No spot welding). The welded areas to be passivated after welding are completed. When welding dissimilar ferrous metals the respective IS code to be followed. Welding Process shall be in accordance to ISO 4063. Weld joints to be cleaned and polished. General Welded tolerances shall be in accordance to ISO 13920- B.
-
-
-
Protection: Contractor to provide protective covering on handrails and guardrails until handover.
-
-
-
Structural steel work in single section, fixed with connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
1000
-
-
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
0.1
-
-
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.
10
-
-
MS Rolling Shutters
-
-
-
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.
-
-
-
80x1.25 mm M.S. laths with 1.25 mm thick top cover
14
-
-
Providing and fixing ball bearing for rolling shutters.
4
-
-
Extra for providing mechanical device chain and crank operation for operating rolling shutters. Exceeding 10.00 sqm and upto 16.80 sqm in the area
14
-
-
Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by Engineer-in- charge, (area of grill to be measured).
5
-
-
Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
500
-
-
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete i/c
-
-
-
i) Smooth grinding / machining of edges / faces / all welding joints.
ii) Preparing the surface to ensure complete removal of mill scale by grit & sand blasting to achieve finish to grade SA 2.5.
iii) Necessary welding (electric arc welding) for required weld lengths and sizes
-
-
-
Hot finished welded type tubes.
625660
-
-
Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.
100
-
-
Providing and fixing mild steel bolts including nuts and washers complete.
100
-
-
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
-
-
-
In stringers, treads, landings etc. of stair cases, including use of Chequerred plate wherever required, all complete
800
-
-
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
50002
-
-
Providing and fixing M.S. tube hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.
24780
-
-
Dash Fasteners
-
-
-
Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge.
-
-
-
10 x 60 mm
100
-
-
10 x 80 mm
100
-
-
10 x 120 mm
818
-
-
10 x 140 mm
1786
-
-
SS Railing
-
-
-
Providing and fixing stainless steel ( Grade 304) gates, railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing, bending to required profile and shape, finish to be Satin/Matt/brushed as per the approval and drawings and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash/anchor fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with 150mm x 100mm, 8 mm SS base plate anchored with 4 Nos. of M12 x 100 SS Anchor fasteners and finally covered with brush finished stainless steel coupling as per the detail drawings., (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). The fixing of anchor fasteners shall carried in close co-ordination with Civil Contractor and should be completed before finishing the Stone/tile flooring as instructed by the Architects.
4598
-
-
Providing & fixing 5.5 mm thick glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :
10
-
-
Anchor Fasteners
-
-
-
Providing and fixing the Chemical Anchor Fasteners as specified below of Hilti Make or equivalent confirming to IS 1367 (Part 3) at required locations and level including drilling the hole, cleaning with blow pump and anchoring the bolt with chemical as per manufacturers specifications etc. complete as directed by Engineer In Charge. M10 x 90 foil capsule (HVU) & M10 x 130 Rod
6389
-
-
Providing and fixing the Chemical Anchor Fasteners as specified below of Hilti Make or equivalent confirming to IS 1367 (Part 3) at required locations and level including drilling the hole, cleaning with blow pump and anchoring the bolt with chemical as per manufacturers specifications etc. complete as directed by Engineer In Charge. M12 x 110 foil capsule (HVU) & M12 x 160 Rod
550
-
-
Providing and fixing mild steel tie rods 25mm dia to support the canopy structure including cost of clamps, rope kit complete
50
-
-
MS Steps
-
-
-
Providing and fixing in position the PVC coated MS steps of size 300 X 150 mm for UG Tank, Sump, STP and OH Tank including placing 150 mm inside concrete ( while doing the form work ), aligning during concreting, grouting the junction if required for all heights and all levels as per the direction of Engineer-in-Charge
178
-
-
FLOORING WORK
-
-
-
(The rates for all items under this section to include)
-
-
-
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate
36
-
-
52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.
329
-
-
18 mm thick Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement.
100
-
-
Providing and fixing glass strips in joints of terrazzo/ cement concrete floors. - 40 mm wide and 4 mm thick
100
-
-
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).
-
-
-
Dark shade pigment using ordinary cement
100
-
-
Extra for pre finished nosing to tread of steps of granite / marble stone
1484
-
-
Extra for granite stone flooring in treads of steps and risers using single length up to 2.1 meters
445
-
-
25mm thick Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand). Finished size size 550mm x 550mm
385
-
-
Extra for pre finished nosing in treads of steps of Kota stone / sand stone slab.
100
-
-
Extra for Kota stone/ sand stone in treads of steps and risers using single length up to 2.00 metre.
100
-
-
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
80
-
-
Vitrified Tiles
-
-
-
Providing and laying Glazed Vitrified tiles Matt/Antiskid finish KAJARIA / SOMANY / RAK / NITCO make of size of Tile 600 x 600 mm in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting of joints of 3mm width with epoxy grout. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.
265
-
-
Providing and laying Vitrified tiles KAJARIA / SOMANY / RAK / NITCO make in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints of 3mm width with epoxy grout (Payment for grouting of joints to be made separately).
-
-
-
Size of Tile 600x600 mm
55
-
-
Providing and laying Vitrified tiles KAJARIA / SOMANY / RAK / NITCO make in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in dado, skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints of 3mm width with epoxy grout (Payment for grouting of joints to be made separately).
-
-
-
Vitrified Matt Tile -Size of Tile 600x600 mm
100
-
-
Vitrified Matt Tile -Size of Tile 600x1200 mm or 800mm x 800m
903
-
-
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18-20 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. -Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent
100
-
-
Granite Flooring
-
-
-
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 -20 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. - Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red like Steel Grey, Tan Brown, S White, P White, Pearl White, Desert brown or equivalent
1664
-
-
Epoxy Grout
-
-
-
Grouting the joints of flooring/dado tiles having joints of 3 mm width, using epoxy grout of make LATICRETE, PIDILITE, FOSROC, SIKA, BAL ADHESIVES, MYK ARMENT of mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.
-
-
-
Size of Tile 600x600 mm
273
-
-
Size of Tile 800x800 mm or 600x1200mm
903
-
-
Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles.
0.1
-
-
Raised access flooring
-
-
-
Providing and fixing removable raised/false access flooring with system and its components of approved make for different plenum height with possible height adjustment upto 50 mm, comprising of modular load bearing floor panels supported on G.I. rectangular stinger frame work and G.I. Pedestal etc. all complete, as per the architectural drawings, as specified and as directed by Engineer-in-charge consisting of:
-
-
-
(a) Providing at required spacing to form modular framework, pedestals made out of GI tube of thickness minimum 2 mm and 25 mm outer diameter, fully welded on to the G.I. Base plate of size 100mm x 100mm x 3mm at the bottom of the pedestal tube, G.I. pedestal head of size 75mmx75mmx3.5 mm welded with GI fully threaded stud 16mm outer diameter with two GI Check nuts screwed on the stud for level adjustment upto 50mm, locking and stabilizing the pedestal head in position at the required level. The pedestals shall be fixed to the subfloor (base) through base plate using epoxy based adhesive of approved make or the machine screw with rawl plug.
-
-
-
(b) Stringers system in all steel construction hot dipped galvanized of rectangular size 570x20x30x0.80mm thick having holes at both ends for securing the stringers on to the pedestal head using fully threaded screws ensuring maximum lateral stability in all directions, the grid formed by the pedestal and stringer assembly shall receive the floor panel, this system shall provide adequate solid, rigid support for access floor panel, the system shall provide a minimum clear uninterrupted clearance between the bottom of the floor for electrical conduits and wiring etc. all complete as per the architectural drawings, as specified and as directed by the Engineer-in-charge.
-
-
-
(c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade Filled Steel anti static high pressure Lamination of 800H grade (FS800H). Access Floor panel shall be steel welded construction with an enclosed bottom pan with uniform pattern of 64 hemispherical cones. The top and bottom plates of Steel Gauges: top 0.6 mm and bottom 0.7mm fused spot welded together (minimum 64 welds in each dome and 20 welds along each flange). The panel should be Corroresist epoxy coated for lifetime rust protection and cavity formed by the top and bottom plate is filled with Pyrogrip noncombustible Portland cementitious core mixed with lightweight foaming compound. The access floor shall be factory finished with Anti-static High Pressure laminate with Non Warp technology upto 1mm thickness for superior adhesion and Surface flatness within 0.75mm.The panel is to withstand a Concentrated Load of 363 kgs. applied on area 25mm x 25mm without collapse in the centre of the panel which is placed on four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50kg all complete as per the approved manufacturers specification and as per the direction of Engineer-in-charge. All specification must be printed on the side of the panel to ensure the quality of the product.
-
-
-
300 mm Finished Floor Height (FFH)
36
-
-
Italian Marble
-
-
-
Providing and laying machine cut, mirror polished Marble stone flooring, in required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm, including pointing with white cement slurry admixed with pigment to match the marble shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. GRAAVA, STONEX, RK MARBLE, OSWAL GRANITE, MADHAV MARBLE
-
-
-
18 mm thick Italian/Imported Marble stone slab from reputed brand/make GRAAVA, STONEX, RK MARBLE, OSWAL GRANITE, OR MADHAV MARBLE - Perlato (Royal / Sicilia / Italian), Italian Dyna, Botticino, Crema Marfil, Bianco/Natural/Atlantic Beige, Rosso Verona, Light and Dark Emperadore, Armani Brown, Travertine etc.
512
-
-
Vaccum Dewatered Flooring
-
-
-
Providing and laying C.C. pavement/floor of mix design M-25 grade of required thickness as per the drawings with ready mixed concrete from Site batching plant or Ready Mixed. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process, providing slopes and finally finished by floating, brooming with wire brush etc. (Wherever required and specified) etc. complete as per specifications and directions of Engineer-in-charge. (The panel shuttering work shall be paid for separately). (Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately).
2196
-
-
Extra for grooves cutting in concrete floor of 5mm width 10mm deep using groove cutting machine and filling the joints with 100 % polysulphide of Sikka or equivalent complete as per drawings and specifications for all levels and all heights as per the directions of Engineer-in-charge.
7700
-
-
Extra for supply and spreading floor hardener of Sikka are equivalent company @ 4kg / sqm, on wet concrete floor Complete as per specification and direction of engineer- in -charge
1500
-
-
Engineered Marble/Stone
-
-
-
Providing and laying 18mm thick pre-processed, pre machine cut, pre mirror polished Engineered Marble/stone stone flooring, in various shades and pattern, required design (Simple geometrical, abstract etc.) and seamless joints, in linear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm, including pointing with white cement slurry admixed with pigment to match the marble shade, including 12mm thick polished brass plat spacer, rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
100
-
-
Granite Strip Coping/moulding
-
-
-
Providing and laying 18 mm thick Polished Granite stone strip coping/moulding with rounded edge upto 50mm width in walls above dado top with cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade complete as per drawings for all levels and heights as per the direction of Engineer-in-Charge - Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red like Steel Grey, Tan Brown, S White, P White, Pearl White, Desert brown or equivalent
793
-
-
Anti-Skid reflective tape
-
-
-
Providing and fixing 25 mm wide high intensity Anti-Skid reflective tape of approved make on edges of treads of staircase including cutting, pasting etc. complete in all respect and as per direction of Engineer-in-charge
1484
-
-
Providing and fixing 50 mm wide Yellow colour, self adhesive 'EDGE STRIPS' of approved make on risers of staircase to help persons with visual disabilities and elderly including cutting and pasting complete in all respect as per direction of Engineer-in-charge.
1484
-
-
Providing & applying self levelling on uneven subfloor using self leveling compound of approved quality , laid at a thickness of not less than 3mm with a coverage of . over a coat of primer using steel trowel with notches to give a joint less, monolithic, smooth, thoroughly cleaned of oil or grease by suitable solvents, at all levels as per manufacturers specification. The floor finish should terminate at the room perimeter passing over a concealed cove former and continuing up the wall for 100mm. Rate shall include all materials, protection with plastic sheet, and removing the same before handing over, work at all levels etc., complete and as directed.
0.1
-
-
Epoxy Coating
-
-
-
Providing & applying self levelling colored/pigmented, highly durable, hard wearing epoxy paint floor topping, laid at a thickness of not less than 3mm with a coverage of 3.5 kg / sq.m. over a coat of epoxy primer of coverage 250 gram / sq.m. using steel trowel with notches to give a self smoothing, seamless, monolithic, glossy appearance, chemical and mechanical resistant over concrete screed surface thoroughly cleaned of oil or grease by suitable solvents, at all levels as per manufacturers specification. The floor finish should terminate at the room perimeter passing over a concealed cove former and continuing up the wall for 100mm. Rate shall include all materials, preparation of screed concrete, protection with plastic sheet, and removing the same before handing over, work at all levels etc., complete and as directed.
0.1
-
-
Providing and laying 2mm thick antifungal self levelling Epoxy flooring on concrete substrate including coving at floor wall junction & including necessary surface preparation using cleaning, dedusting, applying suitable primer including Aisle or zone marking in different colours etc. complete as per manufacturers specifications and as directed by Engineer In Charge.
9534
-
-
Providing & applying Food grade epoxy coating in water tanks
437
-
-
Providing and fixing TACTILE WARNING AND DIRECTIONAL SS STUDS IN FRONT OF THE ELEVATORS AS PER THE REQUIREMENT OF NBC 2016 & HGUSA 2021
79
-
-
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
518
-
-
Providing and fixing polished brass inlay strip in marble flooring of size 12mm x 18mm fixed with adhesives complete as per drawings for all levels and all heights as per the direction of Engineer-in-Charge
614
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
344
-
-
ROOFING & FALSE CEILING WORK
-
-
-
Notes and Conditions for the boq items under subhead false ceiling and roofing work:
-
-
-
(The rates for all items under this section to include)
-
-
-
Quoted Rates are for all heights, depths, levels, leads and lifts
-
-
-
Contractor shall submit Manufacturer’s published literature, including specifications and product Certification: Manufacturer’s certifications that products comply with specified requirements and governing codes including product data, laboratory test reports and research reports showing compliance with specified standards. Samples of all materials shall be got approved by Architect / Engineer-In-Charge before placing order and the approved sample shall be deposited with the Architects, which will be displayed at site as a control sample.
-
-
-
Contractor shall install mock-up sample as per approved drawings at 1:1 scale and in true and proper finish at no extra cost. Mock-ups if approved may be part of completed work if it is undisturbed till the completion of work.
-
-
-
Where specified, directed or required by the PMC/client/Architect, the Contractor shall carry out the necessary tests. The costs and expenses incurred will be borne by the contractor and shall be carried out by a testing laboratory approved by the PMC/client. Copies of test reports shall be submitted to the PMC and Architect. Sub-standard materials and / or work shall be removed and replaced to comply with the correct standards at the contractor’s expense. The Contractor without any extra cost shall provide all equipment and facilities for carrying out field tests on materials if asked by the Architects.
-
-
-
Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) 78, solar reflection 0.70 and initial emittance 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner.
569
-
-
Khurras and gola
-
-
-
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
12
-
-
Providing pcc gola on roof size upto 35mm x 35mm in CC 1:2:4 mixed with waterproofing compound
300
-
-
Providing pcc fillet / gola on roof size upto 65mm x 65mm in CC 1:2:4 admixed with waterproofing compound
354
-
-
Gypsum Board False Ceiling
-
-
-
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with: Make - SAINT GOBAIN GYPROC, INDIA GYPSUM, LAFARGE, USG KNAUF
-
-
-
12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)
543
-
-
12.5 mm thick tapered edge gypsum moisture resistant board
100
-
-
Fully Perforated Gypsum Plaster Board of size 1200 x 2400 x 12.5 mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer-in-charge and as per manufacturer's specification, with all 4 sides tapered and backed by acoustical tissue with NRC value not less than 0.60.
543
-
-
GI Lay-in Plain Metal Tile False Ceiling
-
-
-
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. MAKE - ARMSTRONG INDIA, HUNTER DOUGLAS, DURLUM, SAINT GOBAIN GYPROC, USG KNAUF, DEXUNE, INDIA GYPSUM
-
-
-
GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.
132
-
-
Calcium Silicate Board False Ceiling
-
-
-
Providing & fixing false ceiling at all height including providing & fixing of framework made of special section, power pressed from M.S. sheets and galvanised with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleat of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm, at 1200mm c/c, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25 x10 x0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I channels 45 x15 x 0.90mm running at the spacing of 1200 mm c/c, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having lips of 10.5mm, at 450mm c/c, shall be fixed in a direction perpendicular to G.I intermediate channel with connecting clip made out of 2.64mm dia x 230mm long G.I wire at every junction, including fixing perimeter channels 0.50mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/ partitions with the help of Rawl plugs at 450mm centre, with 25mm long dry wall screws @ 230mm interval, including fixing of Calcium Silicate Board to ceiling section and perimeter channels with the help of dry wall screws of size 3.5 x25mm at 230mm c/c, including jointing & finishing to a flush finish of tapered and square edges of the board with recommended jointing compounds, jointing tapes, finishing with jointing compounds in three layers covering up to 150mm on both sides of joints and two coats of primer suitable for boards, all as per manufacture's specification and also including the cost of making opening for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in charge but excluding the cost of painting with: MAKE - RAMCO HILUX, AEROLITE, SAINT GOBAIN GYPROC
-
-
-
8 mm thick Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process.
133
-
-
POP
-
-
-
Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 7.5 m above floor level, over GI sections frame work of runner and perimetre and GI wire mesh hanged from ceiling with GI hangers fixed with dash fasteners complete for flat surfaces.
240
-
-
Cove
-
-
-
Providing Cove light in ceiling with 10 mm thick plaster of Paris (gypsum anhydrous) size 20mm wide 300m high over GI sections frame work of runner and perimetre and GI wire mesh hanged from ceiling with GI hangers fixed with dash fasteners complete.
636
-
-
FINISHING WORK
-
-
-
Notes and Conditions for all the boq items under subhead finishing works:
-
-
-
(The rates for all items under this section to include)
-
-
-
Rate quoted shall include cost of double scaffolding, cleaning of surfaces, curing, hacking the surface for applying plaster etc at all heights, depths levels, leads and lifts.
-
-
-
Rate quoted shall include cost of providing PVC wire mesh strips 300 mm width at junctions of concrete and masonry or any dissimilar materials and all chasing for electrical & plumbing conduits, pipes etc. for internal and external plaster works
-
-
-
Before commencement of plastering, the area shall be cleaned, wetted and shall be marked with 'Thiyyas' or 'Tapanis' and shall be got approved by the Engineer-in-charge.
-
-
-
Whenever the electrical Contractor/ agency has to fix up switch boxes in walls, necessary Thiyyas or 'Dhadas' shall be arranged prior to plastering so that the electrical boxes are fixed the finished plastered surfaces. Properly in line with
-
-
-
Finishing around the junction boxes shall be done at all floor, level and position to the line, level and right angles as required while carrying out plastering work.
-
-
-
No extra claim/cement consumption shall be entertained by the Department for the plastering done more than the specified thickness shown in the schedule of quantities, to bring the plastered surface to perfect line, level and plumb with adjoining columns and beams.
-
-
-
Internal Plaster (Stores, MEP Service areas, Staircases, Lift shafts, Kitchen and Toilets (wherever no tile dado) and other areas where gypsum plaster is not mentioned
-
-
-
12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand)
15397
-
-
15 mm cement plaster on rough side of single or half brick wall of mix: -1:6 (1 cement: 6 coarse sand)
300
-
-
External Plaster
-
-
-
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand).
1854
-
-
Extra for providing and mixing water proofing material in external cement plaster work in proportion recommended by the manufacturers.
1854
-
-
Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof.
1000
-
-
Ceiling Plaster
-
-
-
6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) on ceiling
1206
-
-
Extra for plastering on circular work not exceeding 6 m in radius: in one coat
100
-
-
Extra for plastering: Spherical ceiling
100
-
-
Extra for plastering: flewing soffits
276
-
-
Forming groove of uniform size in the top layer of wall / ceiling plaster as per approved pattern , finishing the groove complete as per specifications and direction of the Engineer-in-charge : upto size 12mm x 10mm
1904
-
-
Gypsum Plaster for Internal walls
-
-
-
Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster of make SAINT GOBAIN GYPROC ELITE 90, ULTRATECH, FERRO – 700 GYPSUM PLASTER – FERROUS CRETE, J.K. LAKSHMI, BIRLA WHITE having additives and light weight aggregates as vermiculite/ perlite respectively conforming to IS: 2547 (Part - 1 & II) 1976, applied on hacked / uneven background such as bare brick/ block/ RCC work on walls & ceiling at all floors and locations, finished in smooth line and level etc. complete.
547
-
-
Waterproof plaster in drains and sumps
-
-
-
25mm thick single coat cement plaster 1:4 (1 cement : 4 coarse sand) including providing & mixing water proofing compound SBR polymer (of approved make) minimum 2% by wt. of cement used as per manufacturers specification and with a floating coat of neat cement, as directed by Engineer-in-charge including rounding off junction of vertical and horizontal surface.
200
-
-
White Wash
-
-
-
White washing with lime to give an even shade : New work (three or more coats)
11229
-
-
Acrylic Distemper
-
-
-
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of brand ASIAN, DULUX, BERGER, NEROLAC,ULTRATECH, of required shade and colour all complete : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre
28114
-
-
Acrylic Emulsion (Exterior)
-
-
-
Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
1253
-
-
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.
-
-
-
New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.
500
-
-
Synthetic enamel paint
-
-
-
Painting with synthetic enamel paint of brand ASIAN, BERGER, DULUX or ULTRATECH to give an even shade -Two or more coats on new works - White colored enamel in Satin (Soft Sheen) finish as per the approval of Architect
10980
-
-
Painting with synthetic enamel paint of brand ASIAN, BERGER, DULUX or ULTRATECH to give an even shade -Two or more coats on new works -Colored enamel in Satin (Soft Sheen) finish as per the approval of Architect
8316
-
-
Painting with synthetic enamel paint of ASIAN, BERGER, DULUX or ULTRATECH of required colour in satin finish to give an even shade -Two or more coat over an under coat of suitable shade with ordinary paint of approved brand and manufacture as per the approval of Architect
6403
-
-
Putty
-
-
-
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
4777
-
-
Acrylic Emulsion (Interior)
-
-
-
Wall & Ceiling painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of make ASIAN, BERGER, OIKOS, SIRCA, DULUX or ULTRATECH, including applying additional coats wherever required to achieve even shade and colour. -Two coats
16073
-
-
PU Paint
-
-
-
Providing and spray applying Polyurethane 100% Aliphatic grade of make MRF PAINT, BERGER, ASIAN in metallic finish and UV, Scratch and humudity resistant over a coat of PU primer on steel work all to give an even shade and of approved finish complete for all height and levels as directed by Engineer-in-charge.
644
-
-
Primer
-
-
-
Applying priming coat :
-
-
-
With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works
0.1
-
-
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.
-
-
-
With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre.
0.1
-
-
With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre.
30000
-
-
Melamine clear polish
-
-
-
Polishing in high gloss/matt finish melamine clear polish of make ASIAN, DULUX, ICI, BERGER, PIDILITE on wood work in required color/wooden shade texture as per the approval of Architect with following process in the sequence as detailed below:
-
-
-
1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos.
-
-
-
2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs.
-
-
-
3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.
-
-
-
4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.)
340
-
-
ALUMINIUM WORK
-
-
-
Notes and Conditions for all the boq items under subhead Aluminium work:
-
-
-
Contractor/Fabricator/Sub-Contractor shall be responsible to read the bill of quantity in conjecture with the Technical Specifications, Tender drawings, Architectural drawings or other related contract documents. Any discrepancy found in any of the document shall bring to notice of Engineer-in-charge and proceed upon the approval of Engineer-in-charge
-
-
-
Rates inclusives of Contractor submitting the shop drawings of all the doors and windows full assembly types with all the details as required for fixing and joinery, hardware and accessories, method of installation and structural stability calculations based on the architectural design intent drawigs and get them approved by the Architect and Engineer-in-Charge before any execution at site.
-
-
-
All internal doors, windows, ventilators sections shall be polyester powder coated 50 micron in desired colour in matt finish as per the approval of Architect and all External doors, windows, ventilators sections shall be coated with super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge in place of Polyester Powder coating of 50 microns. All Extruded and other sections are to be of JINDAL / INDU ALUSYS / HINDALCO / BHORUKA / MAAN ALUMINIUM make of aluminum alloy grade He9, 6063 and shall conform to latest IS733, IS1285, IS5082, IS 7092-2, being of commercial quality and free from any defects impairing strength, durability and appearance along with certificate of primary biller original manufacturer as directed by Engineer-in-Charge.
-
-
-
All dimensions mentioned in the drawing are approximate. Necessary allowance for fixing over stone/wood/tile or any other material as per the jamb details and also necessary allowances for fixing tolerances to be considered while manufacturing and fabrication. While manufacturing, actual site measurement shall be taken by the contractor. Necessary planning for fixing the unit has to be carried out by the Contractor without any extra cost.
-
-
-
Payment shall be made per Kg basis. Aluminium sections such as shutter frames, track window / door frame/beading channel for glass adjustable louvers etc., shall only be measured linearly as per actual / finished cutting size nearest to centimetre and multiplied with approved sectional weight of the individual section and the total quantity of aluminium section will be arrived at for payment without any allowance for wastage.
-
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately)
-
-
-
For fixed portion -Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)
5911
-
-
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately).
-
-
-
Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)
2371
-
-
Extra for coating the aluminium sections with super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge in place of Polyester Powder coating of 50 microns
2371
-
-
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width
1835
-
-
Providing and fixing anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868. Minimum anodic coating of grade AC 15) sub frame work for windows and ventilators with extruded built up standard tubular sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia and size (Dash fastener to be paid for separately).
750
-
-
Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete, complying to ASTM C920, DIN 18540-F & ISO 11600 -Upto 5 mm depth and 5 mm width
200
-
-
Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer-in- charge complete. Size 255 X 19 mm
20
-
-
Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge. size 10 x 80 mm
50
-
-
Providing and fixing 12 mm thick frameless toughened glass glazing fixed with powder coated aluminium U channel in floor and ceiling i/c filling with silicon sealant after placing backer rod.
20
-
-
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc. To be paid separately).
13
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
-
-
-
With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm)
100
-
-
With toughened clear float glass panes of 12 mm thickness (weight not less than 30 kg/sqm)
60
-
-
With vision glass panels (IGUs) comprising of hermetically-sealed 6-12-6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified. Cost of fixing only is included in the item. (Cost of glass panels (IGUs) paid separately under relevant item in Sub Head Aluminium and Façade Works)
563
-
-
Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in-charge.
-
-
-
Powder coated minimum thickness 50 microns aluminium
30
-
-
WATERPROOFING WORKS
-
-
-
Notes and Conditions for all the boq items under subhead waterproofing:
-
-
-
(Quoted Rates are for all heights, depths, levels, leads and lifts) The operations describe below are only indicative & the item is to be executed as per technical/ manufacturer's specification.
-
-
-
All water proofing work shall be carried out by specialists agency/company having waterproofing experience of 10 years (guarantee period duration) and should have experience in installing similar waterproofing system equal or greater than the value as mentioned in the tender and as approved by the Architect and the Engineer-in-Charge.
-
-
-
MTC, Product data sheets & Method statement for waterproofing work should be supplied from original manufacturer/supplier and must get it approved from Engineer-in-Charge and Architect before the execution of work.
-
-
-
At least Ten years performance guarantee from the date of final practical completion on requisite Non-Judicial Stamp Paper of Rs 100 has to be furnished by the main contractor for all the mentioned.
-
-
-
Water proofing work shall be commenced only after the surface is prepared, smooth rendered, cleaned free of dirt, dust and foreign matters, inspected and approved. Compressed air shall be used for effective cleaning of all surfaces. The vents and other projections through the roof shall be made absolutely secure before flashing.
-
-
-
Testing of waterproofing by ponding water (minimum 150mm depth) as directed by the Engineer-in-Charge for 7 to 10 days. In case of failure, or leakages, the contractor to carry out remedial measures as suggested by the Engineer in Charge. In extreme cases, the contractor to re-do the entire waterproofing after breaking the faulty one. No extra payments to be done.
-
-
-
Water Stop
-
-
-
Providing and applying of swellable type water stop tape, 19mm x 25mm thick or as specified and approved in linear meter (expansive nature) for construction joints treatment of RCC structure such as raft slab, retaining walls, water storage tank and at the junctions of raft slab with the retaining walls etc.. After cleaning the surface, one coat of required primer for swellable water stop tape shall be applied throughout the length of the joint @3.78 litre per 240 running meter. Over the primed surface swellable type water stop tape shall be placed. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage.
-
-
-
Swellable water stop tape 19mm x 25mm thick
3246
-
-
Grading of Roof
-
-
-
Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)
139
-
-
Sunken/Wet Area Proofing (Toilets, Kitchen, Pantry and Balconies)
-
-
-
Providing and laying waterproofing treatment of Make - FORSOC, SIKA, MYK ARMENT, STP LTD. to sunken portions of Toilet, kitchen, Balconies and like areas consisting of:
(1) Making the Surface free of all the depression / undulations, dust dirt, laitance and all the adhesion inhibiting material and making surface even by removing undulations on the entire surface by treating / filling with high strength polymer for repairing and getting surface leveled. (2 ) Treating Wall and Slab joints and around pipe junctions of wall / floor with high strength joint sealing tape 200mm wide and 25m in length fixed in place with high strength and high adhesion 2 component acrylic system by Applying 1st coat of waterproofing slurry on the Wall – Slab joint and immediately placing the tape over it and press it into the still wet slurry with steel trowel to ensure adhesion and release any trapped air. Remaining area / water outlets to be treated in the same manner. After the entire Wall and Slab Joint treatment has been completed, pre wetting of the entire concrete surface and providing and application of the 1st coat of high strength and high adhesion 2 component acrylic slurry with a masons brush. The joint sealing tape should have tensile elongation of 300% and Water impermeability of 5 bars from the positive side according to EN 12390 - 8.
-
-
-
( 3 ) After the 1st coat has sufficiently dried the 2nd coat of high strength and high adhesion 2 component acrylic system can be applied. The total consumption of the product should not be less than 1.8 to 2.0kg / m2 for 2 coats to a minimum DFT of 1.5 mm. Consumption might vary due to various factors of concrete surface like undulation, porosity and finish etc. The two-component acrylic polymer modified elastomeric cementitious liquid applied waterproofing coating should have tensile strength of 2.0 N/Sqmm as per ASTM D 412, elongation of 150% or more as per ASTM D 412 , crack bridging of minimum 2mm as per ASTM D836, Shore A hardness of 60 as per ASTM D2240 & resisting 5 bars hydrostatic pressure as per DIN 1048 applied @ 2kg/sq.mtr all over the entire horizontal and extended up to 300mm above the FFL on the vertical surface as per manufacturer's recommendation. The interval between each coat of coating application is 6-8 hrs. (4) After completion of the above said applications, the waterproofed coating should be left to air cure for minimum of 48 hours. Care should be taken that during this curing period walking or any other activities should be avoided on it. After the curing period is over, finally sprinkling sand over the third coat for better adhesion with plaster/concrete screed.
The treated horizontal surface shall be provided with minimum 40mm thick M20 grade concrete screed admixed with Integral Waterproofing Compound of approved makes as per manufacturer's specifications. and paid under relevant item in concrete sub-head. The vertical surface shall be provided with protection cement plaster (1:4) of minimum 12mm thickness mixed with integral waterproofing compound of approved make and as per manufacturer's specifications so that the waterproof coating does not get damaged. All systems shall be installed by authorised applicators as per manufacturers recommendations and includes all lead and lift for all materials and labor. (Cost of 12mm thick protection cement plaster is included in the cost) (The concrete screed (M20 Grade) shall be paid under relevant item in concrete subhead.)
-
-
-
Sealing of Pipe cut outs/Bore Packing - Supplying & sealing the Sanitary pipe inserts, provided in the floor & walls with double sided bituminous tape and supplying & grouting the gaps around the pipe inserts with non-shrink free flow grout.
The waterproofing system should be applied directly by the manufacturer with 10 years of complete system guarantee against leakage.
-
-
-
Heat laminated polyethylene sheet with outer layer of non-woven geotextile tape 200 mm wide
200
-
-
Horizontal surface area treated with high strength and high adhesion 2 component acrylic system complete applying @ 3kg/ sqm in 2 coats.
490
-
-
Integral Crystalline Waterproofing treatment (RCC Raft and Foundations, RCC Basement Retaining Walls, OHT, STP, UGT, RCC Tunnels, Sumps
-
-
-
Providing and mixing integral crystalline admixture of PENETRON/ KRYTON/ XYPEX / SIKA / PIDILITE / FORSOC make for waterproofing treatment to RCC structures like basement raft, retaining walls, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc.. at the time of transporting of concrete into the drum of the ready-mix truck , using integral crystalline admixture @0.80% (minimum) to the weight of cement content per cubic meter of concrete) or higher as recommended by the manufacturer’s specification in reinforced cement concrete at site of work. The material shall meet the requirements as specified in ACI-212-3R- 2010 i.e. by reducing permeability of concrete by more than 90%, compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure. The crystalline admixture shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage.
12690
-
-
Providing and applying two component instant setting 100% solids spray applied hybrid polyurea waterproofing coating having excellent tensile strength of 15MPa and elongation of 400% (as per ASTM D 412), adhesion to concrete of 2MPa (as per ASTM D 4541), puncture resistance of 1000N (as per ASTM 154) and static crack bridging of up to 2mm (as per ASTM C 836) applied @1.5 kg/Sqm., cracks shall be repaired by cutting V groove in 25x25 mm size and filling the same with polymer modified mortar( 1:3 Cement Mortar having polymer @10% by weight of cement) at the corners above the mother slab for a length of 150mm horizontally and 150mm vertically.
2450
-
-
Providing and filling with light weight cinder filling I/c filling voids with cement concrete M10 and compaction at all levels.
30
-
-
Roof Terrace Waterproofing and Insulation (Commercial Side)
-
-
-
Providing and applying an average 65 mm thick spray applied CFC free polyurethane foam of approved make on Terrace conforming to ASTM D 7425 with a core density of 45-50 kg /m3 (as per ASTM 1622), thermal conductivity of 0.023 W/m.k at 25°C mean temperature (as per ASTM C518/91), U-value of 0.33 W/m2 °k meeting the requirement of ECBC & GRIHA, tensile strength of 400 kPa (as per ASTM D 1623/78), compressive strength 300 kPa (as per ASTM D 1623-03), closed cell content having apparent VOI of 96-98% (as per ASTM D 2856) and fire resistance property confirming to Class B2 as per DIN 4102. Before applying polyurethane foam, cracks shall be repaired by cutting V groove in 25x25 mm size and filling the same with polymer modified mortar( 1:3 Cement Mortar having polymer @10% by weight of cement). Base coat of highly elastomeric two component instant setting 100% solids spray applied hybrid polyurea waterproofing coating having excellent tensile strength of 15 MPa and elongation of 400% (as per ASTM D 412), adhesion to concrete of 2 MPa (as per ASTM D 4541), puncture resistance of 1000N (as per ASTM 154) and static crack bridging of up to 2mm (as per ASTM C 836 applied at 1.5 kg/Sqm at the corners above the mother slab for a length of 150mm horizontally and 150mm vertically.
Over the entire polyurethane foam, supplying and applying two component instant setting 100% solids spray applied hybrid polyurea waterproofing coating having excellent tensile strength of 15MPa and elongation of 400% (as per ASTM D 412), adhesion to concrete of 2MPa (as per ASTM D 4541), puncture resistance of 1000N (as per ASTM 154) and static crack bridging of up to 2mm (as per ASTM C 836) applied @1.5 kg/Sqm. 150 gsm Geotextile (non-woven polyester) over the entire membrane maintaining proper overlaps shall be applied. Make - MYK ARMENT, ARDEX ENDURA, SIKA, ALCHIMICA, PIDILITE
677
-
-
A filler board of 10mm thickness for construction joints shall be placed vertically to form a rectangular bay not exceed 12sqm. The treatment should be followed by protective layer of 75 mm thick fibrated concrete screed including control joints of 3M X 4M size and making angle fillet of 50mmX50mm using M20 grade concrete at the corners.
-
-
-
Termination: Supplying and applying aluminum strip flashing with fasteners at the top and sealing the joints with PS sealant. The waterproofing system should be applied directly by the manufacturer with 10 years of system guarantee against leakages.
-
-
-
(The concrete screed (1:2:4) shall be paid under relevant item in concrete subhead. Exposed filler boards shall be cut by mechanical means and groove shall be filled with Polysulphide Sealant. The width of sealant fill shall not exceed 10mm. All systems shall be installed by authorised applicators as per manufacturer's recommendations and includes all lead and lift for all materials and labor. The waterproofing system should be applied directly by the manufacturer with 10 years of complete system guarantee against leakage.
-
-
-
Podium Landscape Deck, Extended Basement Top Deck Slab + Roof Slab (Parking area)
-
-
-
Providing and applying water based, anti root, low VOC, single component, Pure PU Polyurethane elastomer water proofing membrane with 1.5 mm DFT, having solid % val 90, tensite strength 2 mpa, Elongation 550%, shore A hardness 60 ± 5 with a 150 gsm polyester geotextile membrane and a 50mm thick protection screed of M20 grade concrete as per manufacturer specification and as per direction Engineer-In-Charge. (The concrete screed shall be paid under relevant concrete item in Concrete Sub Head) Make - MYK ARMENT, ARDEX ENDURA, SIKA, ALCHIMICA, SUNANDA SPECIALITY COATINGS, BASF
3829
-
-
Brick Bat Coba (Mumty roof, OHT roof, Substations roof, Lift Machine room roofs etc.)
-
-
-
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc. consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.
313
-
-
(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. With average thickness of 120 mm and minimum thickness at khurra as 65 mm. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. “All above operations to be done in order and as directed and specified by the Engineer-in-Charge :
-
-
-
RCC Basement retaining wall (Outer face - Positive Side for Medium and Low Water Table Zones only)
-
-
-
Providing, mixing and applying SBR polymer of SIKA, FORSOC, DR FIXIT OF PIDILITE, WEBER OF SAINT GOBAIN make modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge.
-
-
-
Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2).
-
-
-
25 mm average thickness in 2 layers.
1588
-
-
GLAZING & FAÇADE WORKS
-
-
-
Notes and Conditions for all the boq items under subhead Aluminium Glazing and Façade Works:
-
-
-
Contractor/Fabricator/Sub-Contractor shall be responsible to read the bill of quantity in conjecture with the Technical Specifications, Tender drawings, Architectural drawings or other related contract documents. Any discrepancy found in any of the document shall bring to notice of Engineer-in-charge and proceed upon the approval of Engineer-in-charge
-
-
-
Rates inclusives of Contractor submitting the shop drawings of all the doors and windows full assembly types with all the details as required for fixing and joinery, hardware and accessories, method of installation and structural stability calculations based on the architectural design intent drawigs and get them approved by the Architect and Engineer-in-Charge before any execution at site.
-
-
-
All doors, windows, ventilators sections shall be super durable powder coated 60-80 micron in desired colour in matt finish as per the approval of Architect. All Extruded and other sections are to be of JINDAL / INDU ALUSYS / HINDALCO / BHORUKA / MAAN ALUMINIUM make of aluminum alloy grade 6063 T5 or T6 as per BS 1474, being of commercial quality and free from any defects impairing strength, durability and appearance along with certificate of primary biller original manufacturer as directed by Engineer-in-Charge.
-
-
-
Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings, the aluminium quality as per grade 6063 T5 or T6 as per BS 1474, including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). The weight of aluminium extruded section shall be taken for purpose of payment.
0.1
-
-
Rates inclusives of Contractor submitting the shop drawings of all the doors and windows full assembly types with all the details as required for fixing and joinery, hardware and accessories, method of installation and structural stability calculations based on the architectural design intent drawings and get them approved by the Architect and Engineer-in-Charge before any execution at site.
-
-
-
Aluminium Louvers
-
-
-
Providing, Supplying and fixing of aluminium extruded Tubular, Elliptical, Z- and other aluminium sections as per the architectural drawings and approved Engineer-in-charge drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474. The aluminum extrusions shall be coated with with super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. (The item includes cost of material such as cleats, sleeves, M.S. H.D.G. bracket, S.S. 316 grade nut bolt, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). The weight of aluminium extruded section shall be taken for purpose of payment.
3800
-
-
Elliptical/Box/Z- Louver System
-
-
-
SS Flymesh Screen
-
-
-
Providing, fabricating, supplying and fixing in position of S.S. 316 grade fly mesh screen of required size and shape as shown in the architectural drawing, in linear as well as curvilinear portions of the building fix on aluminium framing with flat bar, screws, packing shim etc. complete as per architectural drawing. Aluminium framing fixed to R.C.C. structure with HRD anchors,packing shim, alum. cleat screws etc. provide weather silicone periphery of the structure opening. aluminium framing shall be coated (exterior side) with super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. Contractor/Fabricator/Sub-Contractor shall be responsible to read the bill of quantity in conjecture with the Technical Specification, architectural drawings, Architectural drawings or other related contract documents.Any discrepancy found in any of the document shall bring to notice of Engineer-in-charge and proceed upon the approval of Engineer-in-charge
180
-
-
External Glazing (IGU - 24 mm th) for External Glazing (Windows and Doors)
-
-
-
Providing, assembling and supplying vision glass panels (IGUs) Saint Gobain Make or equivalent comprising of hermetically-sealed 6-12-6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthened clear float glass 6mm thick, spacer tube 12mm wide, desiccants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm.
-
-
-
6 mm thick (SKN-144 II, SKN 454 II of Saint Gobain Make or equivalent) Heat strengthened glass with reflective soft coating on face # 2 (shade as approve by architect/Facade consultant) + 12 mm Air gap + 6mm Fully toughened clear Glass of approved make having properties as visible Light transmittance (VLT) of 40 to 55 %, Light reflection internal 15 to 22%, light reflection external 14 to 20 %, solar factor (0.2-0.24) and U value of 1.5 to 1.6W/m2 degree K etc.
563
-
-
Openable Side / top hung
-
-
-
Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc., all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in- Charge.
197.05
-
-
Spider Glass Canopy - Main Entrance Canopy Commercial and MLCP
-
-
-
Design, supply & installation of Suspended Spider glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The spider canopy system held with Spider Fittings with articulated routel of SS-316 Grade Steel of approved manufacturer with glass panel having 13.52mm non hygroscopic laminated glass held together with SS- 316 Grade Stainless steel Spider, articulated routel & bolt assembly. S.S. studd welded on M.S. structure (Done by other), spider fitting fixed on studd with bolt, Provide non staining weather sealants in all grooves of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings. The joints between glass panels (6 to 8 mm) and gaps at the perimeter be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof. The cost will be inclusive of frosted hanging system. (Glass cost paid separately) Make of Spider Fittings - DORMA, LISUS, SADEV, OZONE
266
-
-
The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding , other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured. "
-
-
-
(j) Contractor/Fabricator/Sub-Contractor shall be responsible to read the bill of quantity in conjecture with the Technical Specification, architectural drawings, Architectural drawings or other related contract documents. Any discrepancy found in any of the document shall bring to notice of Engineer-in-charge and proceed upon the approval of Engineer-in-charge
-
-
-
Spider Canopy Glass (13.52 th Ceramic Fritted Laminated)
-
-
-
Providing, assembling and supplying glass comprising of 6-1.52-6mm non- hygroscopic laminated glass (single glazed) of size and shape as required and specified, comprising of fully toughened ceramic fritted glass 6mm thick, 1.52mm non- hygroscopic layer and 6mm thick Fully Toughened clear float glass) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The glass shall be assembled in the factory/ workshop of the glass processor. For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm.
0.1
-
-
(i) 6mm Ceramic Frit patternerd toughened glass +1.52mm non- hygroscopic layer + 6mmclear toughened glass having properties as visible Light transmittance (VLT) of 55 to 70%, Light, reflection internal less than 10%, light, reflection external less than 12%, solar heat gain coefficient (less than 0.6) and U value less than 4.9W/m2 degree K etc. (Frit pattern to be approved by Architect and Engineer-In-Charge before execution at site)
266
-
-
ACP Cladding System
-
-
-
Designing, fabricating, testing, installing and fixing in position Aluminium Composite Panel of ALUCOBOND / ALUDECOR / ALPOLIC / ALSTRONG make and FR-A2 grade (tested and certified as per NFPA 285, EN13501-2018, EN11925.2:2020) with Min 2 Hr fire rating Cladding, with Open grooves system for linear as well as curvilinear portions of the building , for all heights and all levels etc. Including:
300
-
-
(a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.
-
-
-
(b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metallic/natural stone/wooden colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR- A2 grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. The composite panel should be scratch resistant, anti-graffiti, chemical resistant, water and mud repellent, high abrasion resistant and with antimicrobial properties.
-
-
-
(c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working aluminium structure with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item's The Contractor shall provide aluminium chromotized with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external However, for the purpose of payment, only the actual area on the external width of groove) shall be measured in sqm. up to two decimal places.
-
-
-
Ventilated Clay Tile Façade Panelling
-
-
-
Designing, fabricating, testing, providing and fixing Ventilated Clay/Terracotta Tiles Façade system of 'UNISTONE', 'CLAYTON' or Equivalent Make in approved shade, pattern, design, texture, finish, and size of 295-400 mm X 95-100 mm in thickness of 15-20mm. The clay panels/tiles shall have Flexural Strength /Modulus of rupture average ≥ 30 N /mm2 in accordance to IS 15622:2017 E ≤ 0,08 PERCENT (GROUP B IA) (CLAUSE 6) with breaking strength ≥ 1000 N in accordance to IS 5622:2017 Part 6. The panels should have water absorption percentage by mass should be ≤ 1 % in accordance to S 15622:2017 E ≤ 0,08 PERCENT (GROUP B IA) Part 2. (CLAUSE 6) The surface scratch hardness value i.e., Moh’s scale should be Minimum 6 in accordance to IS 13630 Part 13. The clay panels should have inherent properties of being resistant to stains and chemicals. The material should be Class I material in terms of reaction to fire in accordance to EN 13501‐1 / ASTM E136. The tiles and system shall be designed to resist wind load as per IS 875 (Part 3) according to different zones and duly approved and vetted by the structural consultant. The cladding panels shall be fixed on to existing cured plastered surface substrate wall treated with one or two coats of primer with appropriate Mild Steel (M.S.) rectangular/square hollow section vertical member’s framework of 50mm X 50mm or 30mm x 60mm (4.0mm thick) Mild Steel (M.S.) Substructure which shall be spaced out in accordance to the dimensions of the panel with minimum spacing of 600mm. The vertical MS framework shall be fixed to the wall using HDG (hot-dip-galvanized) steel L-brackets (galvanizing thickness of minimum 80 microns) of required size with stainless steel grade 304, M10 full threaded anchor fasteners with nylon sleeve 100mm long (for brick work) and M8 expansion anchor fasteners 75mm long for concrete surface, spacing of brackets to be based on a structural/ static calculation.
3916
-
-
The manufactured panels shall have an evenly controlled factory – made groove for resting on to a continuous aluminium rail profiles (horizontal runner) throughout their length. The profiles are designed and manufactured for starter piece, intermediate and an inverted starter profile for the top piece. Aluminium rail profile (horizontal runner) shall ensure uniform and precision joints and shall be factory finished with Super Durable powered coated colour in approved RAL shade as per the approval of Architect. All aluminium profiles, excluding substructure framework are duly treated with SDP (Super Durable Polyurethane Powder coating) of minimum 50 microns under controlled factory premises conditions, where it is heat cured for 10 minutes @ 200°C object temperature on 4 stage PT chromated substrate for superior adhesion as per ASTM D 3359 with a warranty of 10 years against any fading under exterior conditions due to exposure of UV Sunlight, Harsh weather, and exterior conditions as per AAMA 620 specifications All fixtures, and screws shall be corrosion free i.e., all rail profiles, cleats to be used should be made of 6063 T6 alloy grade and all screws used should be of M/s Hilti, Worth, Klimas, Fischer & Patta or equivalent. The groove of the width can be chosen i.e., 1.7mm, 3mm, 6.5mm, 12.6mm or 20mm as per the approval of Architect. The corners junctions can be treated as regular corner fixing or Mitred corner fixing. The vertical joint open groove between two adjacent tiles shall be 3-5mm as per the approval of Architect. The tiles shall be installed using the ventilated rain screen principle with provision for natural ventilation of the space between the façade tiles and the structural wall. All fixing details and shop drawings along with structural calculations to be provided by vendor/contractor and to be duly approved by Engineer in charge and Architect before any execution at site. The work shall be carried out as per specification, drawings and complete for all heights and levels as per direction of the Engineer-in-Charge. Note: Scaffolding wherever required to be paid separately.
-
-
-
The above work as described shall be carried out only by the specialists agency/company having similar experience of 10 years (guarantee period duration) and should have experience in installing ventilated dry cladding system equal or greater than the value as mentioned in the tender and as approved by the Architect and the Engineer-in-Charge.
-
-
-
MTC, Product data sheets & Method statement for the above mentioned work should be supplied from original manufacturer/supplier/ execution agency and must get it approved from Engineer-in-Charge and Architect before the execution of work.
-
-
-
At least Ten years performance guarantee against any breakage of tiles and system performance from the date of final practical completion on requisite Non-Judicial Stamp Paper of Rs 100 has to be furnished by the main contractor for all the mentioned.
-
-
-
Solid Aluminium Sheet Vertical Fin With MS Framework Inside
-
-
-
Designing, fabricating, providing, erecting and fixing ‘UNISTONE’ or equivalent non-combustible, SOLID SHEET ALUMINIUM FIN WITH MS FRAME WORK INSIDE i.e. using 6063 / T6 allow grade of M/s Jindal, Global, Nalco, Hindalco or equivalent in 1.8-2 mm (±0.3) thickness in approved size and shape and in RAL Shade in Matt Finish as approval. The RAL Shade in Matt finish on aluminium profile shall be achieved using Super Durable Polyurethane coating of specific gravity 1.6 (+/- 0.4) manufactured by M/s Jotun, AkzoNobel, Asian or equivalent under controlled conditions of heat cured for 10mins at 200 degrees’ Celsius object temperature on 4 stage PT chromated substrate to result in adhesion as per ASTM D 3359 up to average 65 micron of base coat for exterior conditions to meet or exceed qualicoat/AAMA 620 specification and warranted for UV resistance for a period of 25 years. The entire fixing system shall be designed & structurally vetted in accordance to the wind load for the location of the project and the complete system including all fixtures, screws, fasteners and all other aligned accessories, as required shall be corrosion free. The, SOLID SHEET ALUMINIUM Fin shall be fixed on the Square MS Hollow sections of 60x60x5mm / 65x65x5mm / 70x70x5mm sub frame (Red oxide Primer & Painted) along with MS Base Plate & MS Angle. MS Galvanized fasteners of M/s Trutrek, Hilti or equivalent to be used to fixed the MS Frame. The work shall be carried out as per specification, drawings and complete for all heights and levels as per direction of the Engineer-in-Charge. Note: Scaffolding wherever required to be paid separately.
2278
-
-
M.S. C-Feature
-
-
-
Providing, fabricating, supplying, erecting and fixing in position M.S. C- Section (Built up from M.S. 10mm thick M.S. Plate of approved make) of required size-285-300(H)x65-75(W)x10mm thick as shown in the tender drawing, in linear as well as curvilinear portions of the building fix on R.C.C./M.S. beam Structure with M.S. hot dip galvanised base plate, S.S. 316 grade anchor fastener, nut, bolt and packing shim etc. complete as per tender drawing. All M.S.work shall be sand blasted and finish with with 2 coat anti-rust zinc rich primer, 3 coat of spray applied P.U paint of make, colour and finish as approved by the Architect. Contractor / Fabricator / Sub-Contractor shall be responsible to read the bill of quantity in conjecture with the Technical Specification, Tender drawings, Architectural drawings or other related contract documents. Any discrepancy found in any of the document shall bring to notice of Engineer-in-charge and proceed upon the approval of Engineer-in-charge. (The item includes cost of fabrication, Erection of C- Chanel and finishing as mentioned above complete for all levels and heights as directed by the Engineer-in-Charge. Nothing extra shall be paid on this account). Note: Scaffolding wherever required to be paid separately.
20809
-
-
Stone Coping, Cornice etc
-
-
-
Stone work, plain in copings, cornices, string courses and plinth courses, upto 75 mm thick in shape, size as per drawings, i/c chamfering of edges, making grooves and drip courses, in Cement mortar 1:6 (1 cement : 6 coarse sand) including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade complete as per drawings for all levels and all heights and as per the direction of Engineer-in-Charge.
-
-
-
Red sand stone
18
-
-
White sand stone
0.1
-
-
FIRE DOORS & HARDWARE
-
-
-
Partial Insulated Metal Fire doors ( FD120-PI - As per IS 3614:2021
-
-
-
Providing and fixing ISI marked partially insulated fire rated GI Sheet doors of make 'NAVAIR', 'SHAKTI HORMANN', 'PROMAT' or Equivalent conforming to FD 120-PI classification of IS 3614 :2021 with fire rating of 120 minutes integrity and 30 minutes insulation. The factory manufactured door frame and shutter assembly shall be made out of minimum 1.20 mm thick GI Sheet with minimum 120 g/m2 coating as per IS: 277. Both the Door frame and shutter should be finished with powder coating in RAL shade finish as per Architect's approval having DFT of minimum 50 microns. The door should carry a minimum 500 Hrs of salt spray test. All accessories like hardware, vision panel, fire & smoke seal etc. to be supplied by Fire door manufacturer only as per the guidelines laid down in IS 3614:2021. Every door must be ISI labeled confirming to type of door & its fire rating. The offered door must carry a prior valid test evidence of 5 years from CBRI-Roorkee, separate test report for single leaf door and double leaf door is required as per IS 3614-2021. No fresh testing is required within the validity of test report from CBRI Roorkee.
-
-
-
Factory made Door frame with architrave shall be step rebate grooved profile of minimum size 125 x 75 mm made out of minimum 1.5 mm (16 gauge) minimum thick galvanized steel with minimum 120 g/m2 coating as per IS 513 (Parts 1 and 2) or IS: 277.. Frames shall be knock down form, mitered and field assembled with self-tabs. Frames to have in build grooved sealing system and shall be site fitted with fire rated EPDM gasket as standard. All provision should be mortised, drilled, tapped & provided with necessary inbuilt reinforcement for receiving appropriate hardware. Frames should be provided with back plate bracket and anchor fasteners with 10 mm dia and minimum 80 mm long HDG fasteners, with Polyamide sleeves of Hilti /CSK Philips for installation of frame in finished plastered/cladded masonry wall opening. Frames shall be filled with fire rated puff and the gaps shall be sealed with silicon sealant. (Rates Inclusive of Anchor Fasteners M10X80mm length, intumescent fire seal and fire rated EPDM gasket). Door leaf shall be 60 mm thick fully flush double skin step design door, insulated with or without vision lite. Door leaf shall be manufactured from 1.2 mm (18 gauge) minimum thick galvanized steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware. The infill material shall be 120 kg/m3 high density mineral wool insulation material. Intumescent seals 15 x 1.5 mm to be provided all around the door in addition to the grooved smoke seal. All doors shall be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 1.4 mm. For pair of doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf. Vision lite wherever applicable should be provided as per manufacturers recommendation with a clip-on arrangement. The glass should be 6 mm Fire Resisting clear fire rated glass of approved make and rating. Max size of the vision panel shall not exceed 0.06 sq.mtr as per guidelines laid down under IS 3614 : 2021 vide clause no. 7.2.7 table no. 2 with a clip on arrangement. Every Glass pane must carry a permanent marking of the manufacturer. Door must be tested with vision panel. (Rates Inclusive of intumescent fire seal). Rate exluding door closer and panic bar, trim.
239
-
-
UN Insulated Metal Fire doors FD 120 UD- As per IS 3614:2021
-
-
-
Providing and fixing ISI marked fire rated GI Sheet doors of make 'NAVAIR', 'SHAKTI HORMANN', 'PROMAT' or Equivalent conforming to FD 120-UD classification of IS 3614 :2021 with fire rating of 120 minutes integrity only. The factory manufactured door frame and shutter assembly shall be made out of minimum 1.50 mm thick GI Sheet with minimum 120 g/m2 coating as per IS: 277.
Both the Door frame and shutter should be finished with powder coating in RAL shade finish as per Architect's approval having DFT of minimum 50 microns. The door should carry a minimum 500 HRs of salt spray test. All accessories like hardware, vision panel, fire & smoke seal etc. to be supplied by Fire door manufacturer only as per the guidelines laid down in IS 3614:2021. Every door must be ISI labeled confirming to type of door & its fire rating.
The offered door must carry a prior valid test evidence of 5 years from CBRI-Roorkee, separate test report for single leaf door and double leaf door is required as per IS 3614-2021. No fresh testing is required within the validity of test report from CBRI Roorkee.
-
-
-
Factory made Door frame with architrave shall be single rebated grooved profile to accommodate 10x4mm Fire Seal and of minimum size 125 x 55 mm made out of minimum 1.5 mm (16 gauge) minimum thick galvanized steel with minimum 120 g/m2 coating as per IS 513 (Parts 1 and 2) or IS: 277. Frames shall be knock down form, mitered and field assembled with self-tabs. Frames to have in build grooved sealing system and shall be site fitted with fire rated EPDM gasket/smoke seal as per IS: 3614:2021 All provision should be mortised, drilled, tapped & provided with necessary inbuilt reinforcement for receiving appropriate hardware. Frames should be provided with back plate bracket and anchor fasteners with 8-10 mm dia and minimum 80 mm long HDG fasteners, with Polyamide sleeves of Hilti /CSK Philips for installation of frame on finished plastered/cladded masonry wall opening.. Frames shall be filled with fire rated puff and the gaps shall be sealed with silicon sealant. (Rates Inclusive of Anchor Fasteners M10X80mm length, intumescent fire seal and fire rated EPDM gasket). Door leaf shall be 46 mm thick fully flush double skin door, Un-insulated with or without vision lite. Door leaf shall be manufactured from 1.2 mm (18 gauge) minimum thick galvanized steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware. The infill material shall be resin bonded honeycomb core. All doors shall be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 1.4 mm. For pair of doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf. Vision lite wherever applicable should be provided as per manufacturers recommendation with a clip-on arrangement. The glass should be 6 mm Fire Resisting clear fire rated glass of approved make and rating. Max size of the vision panel shall not exceed 0.12 sq.mtr as per guidelines laid down under IS 3614 : 2021 vide clause no. 7.2.7 table no. 2 with a clip on arrangement. Every Glass pane must carry a permanent marking of the manufacturer. Door must be tested with vision panel. (Rates Inclusive of intumescent fire seal). Rates excluding cost of door closer, panic bar & trim.
49
-
-
Providing and fixing 1 point modular fire panic device for 2 hr fire rating of approved make tested in accordance with EN1125, along with External trim with lever handle (without lock) on pull side in silver / grey finish, complete set with spindle, screws and fixing accessories (Approved make - DORMA / HAFELE / GEZE / /DORSET / HETTICH ) Equivalent to Dorma PHCR 1-1200 + External Trim PHCRT 2905 or Hafele 903.10.625 + 901.02.401
30
-
-
1 point modular fire panic device on active leaf & 2 point vertical modular fire panic device on inactive leaf, double door rebated strike for 2 hr fire rating of approved make, along with External trim with lever handle on pull side on active leaf in silver / grey finish, complete set with spindle, screws and fixing accessories (Approved make - DORMA / HAFELE / GEZE / /DORSET / HETTICH ) Equivalent to Dorma PHCR 1200 1& 2 Point Locking + External Trim PHCRT 2905 or Hafele 903.10.625 + 903.10.665 + 901.02.401
25
-
-
Providing and fixing fire rated 5 Knuckle, 2 ball bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in satin stainless steel. As per EN 1935, CE Marked. Suitable for door weights upto 120kgs. Equivalent to Dorma 3090F or Hafele 926.32.180 (Approved make - DORMA / HAFELE / GEZE / /DORSET / HETTICH )
404
-
-
Supply & fixing Extruded Aluminium body heavy duty fire rated door closer with full body cover and CE mark, with std. arm and with two independent closing valves and latching speed adjustable by arm. Silver finish. Tested as per EN 1154 for door widths upto 1400mm and weight upto 150 kgs. Closing force 2-6, Non Handed with adjustable Back check, No Hold Open Mechanism, The door closer shall have 10 years mechanical warranty from the manufacturer and complete with EN 1154- for 100000 cycles and is ANSI/BHIMA certified. Equivalent to Dorma TS 89F or Hafele 931.84.769 DCL 55 or Geze TS 5000, On Pull/Push Side as per drawing. (Approved make - HAFELE / GEZE / HETTICH / DORMA / DORSET)
101
-
-
Providing and fixing Surface mounted door coordinator for double doors along with necessary carry bar for double door, non handed as per EN1158 for fire door. CE marked. Equivalent to Dorma SR 390 or Hafele 931.99.900. (Approved make - HAFELE / GEZE / HETTICH / DORMA / DORSET)
25
-
-
Providing and fixing stainless steel (Grade 304) fire rated lever action flush bolt with 19mm projecting bolt L=300mm for Metal fire door in satin chrome. Equivalent to Dorma 3101-1
10
-
-
SS HARDWARE
-
-
-
Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc. all complete.
-
-
-
125 mm
4
-
-
100 mm
7
-
-
Providing and fixing 250mm x 10mm aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
4
-
-
Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc. complete as per direction of Engineer- in-charge. ( Dorma / Dorset / Hardwyn )
2
-
-
Providing and fixing DEC 6Plus 6 Pin Euro Profile Double Cylinder with Both side Key operation Under Master Key System. Total Length = 60mm (30mm+30mm)Change Keys - 3 Nos. Finish - Nickel Plated. Approved make Dormakaba
0.1
-
-
Providing and fixing Dormakaba Mortice dead lock 278a with 55mm backset, 20mm square forend and prepared for euro profile cylinder including strike plate in satin stainless steel as per EN 12209.
0.1
-
-
Providing and fixing Mortise dead Lock complete set with both side key cylinder Geze/ Becker fs make.
0.1
-
-
Providing and fixing Male/female sign plate 3020-M for WC application with fixing screws size 125 x 125mm, rounded corners in SS 304 satin stainless steel finish. Marking in black
16
-
-
Providing and fixing handicapped person toilet sign plate 3020-M for WC application with fixing screws size 125 x 125mm, rounded corners in SS 304 satin stainless steel finish. Marking in black
8
-
-
Providing and fixing Dormakaba pull Handle Length 300mm, 22mm dia, -SS304 TGDI-D 300 back to back with adjustable fixing for glass, wood and metal doors in satin stainless steel. The pull handles should have supporting washer with raised beveling on the outer surface.
16
-
-
Supply & fixing Rack and pinion door closer EN size 2/3/4, with std. arm and with two independent closing valves and latching speed adjustable by arm , Door leaf width upto 1100mm , door weight 100 kg, Silver finish. As per EN 1154. Approved Make : Dormakaba TS 68 Geze TS 2000 NV / Hafele DCL51
16
-
-
Supply & fixing Aluminium Body Rack and Pinion Door closer with Hold Open arm, EN Size 3/4, Non Handed, with std. arm , Tested and approved to EN 1154, full body cover and closing speed adjustable at 2 closing valves, and latching speed adjustable by arm, surface mounted on Inside face . Approved Make : Equivalent to Dorma TS-71 for door width upto 1100mm, and with Hold Open arm or Hafele 931.84.639
32
-
-
Supply & fixing rack and pinion door closer TS 83 EN size 7, with backcheck and standard arm with two independent closing valves and latching speed adjustable by arm. All adjustment screws face fixed with slide plate. Silver finish. As per EN 1154 and CE marked. . Approved Make : Dormakaba
10
-
-
Providing and fixing SS 304 5 Knuckle, 2 ball bearing butt hinges ISI Marked size 4" x 3" x 3mm, Template Drilled (Approved make - DORMA / HAFELE / GEZE / /DORSET / HETTICH ) Equivalent to Dorma BB 4330 or Hafele 926.32.160
0.1
-
-
Providing and fixing Dormakaba pull handle TGDI 9356 350mm back to back Offset pull handle, adjustable fixing for glass, wood and metal doors in satin stainless steel. The pull handles should have supporting washer with raised beveling on the outer surface. Length =350mm, 25mm dia, -SS304
0.1
-
-
Providing and fixing Dormakaba pull handle TGDI-D 300 Single Side with adjustable fixing for glass, wood and metal doors in satin stainless steel. The pull handle should have supporting washer with raised beveling on the outer surface. Length =300mm, 22mm dia, -SS304
21
-
-
Providing and fixing concealed flush bolt 600mm Geze/ Becker fs make
0.1
-
-
Providing and fixing Pure 8100 Type 1 Package with Pair of Pure 8100 Design Lever Handle on Roses & escutcheons. Including 271a Sash lock with 72mm CTC, 55mm Backset 20mm Square forend. EPC 60mm length both side key operation
0.1
-
-
Providing and fixing Pure 8100 Type 3 Package with Pair of Pure 8100 WC Design Lever Handle on Roses & escutcheons 7122. Including 275a WC lock with 78mm CTC, 55mm Backset 20mm Square forend.
17
-
-
Providing and fixing Dormakaba floor stop half dome with 45mm dia with fixing accessories, in satin Chrome
0.1
-
-
Providing and fixing Dormakaba wall stop 60mm long with fixing accessories, in satin Chrome
20
-
-
Providing and fixing Dormakaba 3006, 6 pin Euro profile half cylinder with one side key operation standard length 42mm in satin nickel plated finish with 3 keys.
5
-
-
Providing and fixing lever flush bolt 600mm long
5
-
-
Providing and fixing lever flush bolt 300mm long
5
-
-
Providing and fixing stainless steel (Grade 304) tower bolts approved equivalent with necessary screws etc. complete.
-
-
-
150 x 10mm
25
-
-
250 x 10mm
0.1
-
-
300 x 10mm
25
-
-
Providing and fixing Dormakaba glass door floor lock with fixing accessories, in satin Chrome
0.1
-
-
Providing and fixing Dormakaba pull Handle Length 600mm, 32mm dia, -SS304 TGDI-D 600 back to back with adjustable fixing for glass, wood and metal doors in satin stainless steel. The pull handles should have supporting washer with raised beveling on the outer surface.
2
-
-
Providing and fixing Dorma kick plate 1020-3 height 300mm and thickness 0.9mm in SS 304 grade in satin stainless steel with smoothened edges and rounded corners flush face fixing screws . Length=5mm short of the shutter width. Max door width =900mm (To be fixed on push side of the doors)
34
-
-
Providing and fixing Dorma kick plate 1020-3 height 300mm and thickness 0.9mm in SS 304 grade in satin stainless steel with smoothened edges and rounded corners flush face fixing screws . Length=5mm short of the shutter width. Max door width =1200mm (To be fixed on push side of the doors)
16
-
-
Providing and fixing Dormakaba mop plate 1010-1 with smoothened edges and rounded corners flush face fixing screws height 150mm and thickness 0.9mm in SS 304 grade in satin stainless steel. Length=5mm short of the shutter width. Max door width =900mm
8
-
-
Providing and fixing lock with Ellen key for Janitor door
21
-
-
Providing and fixing GI screw as fasteners to fix metal door frame 75mm long
200
-
-
MISCELLANEOUS WORKS
-
-
-
Modular Compact Laminate for Toilet Cubicle
-
-
-
Providing, Installation and handover of Toilet cubical of width and depth as per drawings (Standard height of toilet cubicle is between 1995-2105mm, standard door width of 600mm and overall cubicle width of 800-950mm and depth of 1400-1600mm) of Greenlam (Sturdo Series), Fundermax or Merino (Athena Series) make and self-supporting FR grade 12mm thick decorative compact laminate made up of urea free, thermosetting phenolic resins treated Kraft paper as core material and Amino plastic resins treated decor papers on the finished surface under high pressure with permanently incorporate anti-bacterial agents to provide antivirus, antibacterial and antifungal properties (conforming to ISO 21702-2019, JIS Z2801-2010 and ASTM 621-2015 respectively). Compact board should be resistance to water immersion through permissible increase on thickness and mass 0.60% and board density 1.35kg/cm3 and fulfilled the criteria of FSC and green guard gold certification for low VOC emission and manufactured under IS2046-1995 and EN438-2&3:2016 latest applicable standards. 12mm thick compact board should be Moisture resistant, Impact resistant, termite resistant, Scratch resistant, color change resistant, heat and chemical resistant and climatic shock resistant. Compact laminates to be in suede or matt finish in texture/shade as per the approval of Architect and which includes door, pilasters and intermediate panels and fulfilled the criteria of fire retardancy under BS-476/97 and EN438-6 with classification of BS1D0 standard.
21
-
-
Pilasters are slotted and affixed to the top rail. They are secured from the top of the top rail. The bottom gap is 150 mm. Pilaster to be supported by Metal pedestal footing/leg (Straigth leg made of SS 316 Brush finish) and intermediate panels will attached to the wall with the help of approved aluminum U channel/ All required hardware and accessories in SS 316 grade and Powder coated aluminum as per manufacturer’s specification. Each cubicle should contain SS Door knob, SS Spring loaded hinges, SS Thumb turn lockset with occupancy indicators, SS Single coat hook, Aluminium (Grade 6063-T6) anodized or matt finished powder coated in desired colour U channel, top rail with corner connector, adjustable foot/pedestal (SS 316 brush finish), Rubber noice deafening tape, screws & wall plugs. The top fitting should consist of D shaped Aluminum (Grade 6063-T6) powder coated matt finish or anodized top rail in desired colour by Architect and which will get fixed with Mid & End pilaster. All screws will be of 316 grade in SS finish. The base diameter 65mm and neck diameter of 33mm anchored to the floor with 316 grade SS screws with pust fit capping at a clearance height of 150mm.
-
-
-
Shop Drawings:
Contractor will submit the shop drawings from the original manufacturer after taking actual measurements from the site and get them approved from the Architect before any execution. Shop Drawings will contain the following information. Plan and Elevations of each Toilet cubicle design. Details of doors including vertical and horizontal edge details. Details of anchorages, accessories, joints, and connections. Coordination of Doors with works of other Vendors & their requirements. Samples and Mockup: The Contractor shall fabricate and install full size specimens of the Toilet Cubicle as called for by the Architect at the expense of Contractor. Warranty: The contractor should provide 10 years warranty certification from the original manufacturer on any manufacturing and moisture related defects. Apart from it the installation shall be guaranteed against faulty workmanship/ materials, etc. for a minimum period of FIVE YEARS from date of virtual completion. All faulty materials/workmanship shall be replaced and restored to full operation at no cost to Employer / Owner within the guarantee period. Note:- The above work to be carried out by a specialized agency approved by the Engineer- in-charge.
(Rates - All inclusive as to execute the item as per above and handover complete for all heigths and all levels)
-
-
-
Providing & fixing 12mm thick acid wash toughened glass urinal partition fixed to wall with SS fittings as per detailed drawings size 600mm x 1200mm in shape as per drawings.
17
-
-
Providing and pasting custom design pattern and partially translucent vinyl graphics film(3M make or equivalent) as per design & drawings.
6
-
-
SS Braille Labels
-
-
-
Providing and fixing Stainless Steel (Grade 304) Braille Labels of size 170mm x 35mm X 0.5 mm having Braille dots raised 0.5mm above base plate with one SS rivet of same grade and adhesive of approved make on staircase and ramp handrails, at all floors and all levels complete as per the directions of the engineer in charge
147
-
-
U Shaped Grab Bar
-
-
-
Providing and fixing in position 'U' shaped Grab Bar made up of Heavy Duty stainless steel (grade 304) of 750 mm in length & 40 mm dia (Outer dia with 3 mm thick sheet ) seamless pipe including Hinge,base plate and steel fastners, in the toilets as per manufacturers specification, as per drawings and "Harmonised Guidelines & Space Standard for Barrier Free Environment issued by MOUD, Govt Of India" to make them Accessible for Persons with Disabilities. Rate shall include all accessories, labour and material, complete for all levels and all heights as per direction of Engineer-in-charge.
8
-
-
L Shaped Grab Bar
-
-
-
Providing and fixing in position 'L' shaped Grab Bar made up of Heavy Duty stainless steel (grade 304) 40 mm (Outer dia with 3 mm thick sheet ) dia seamless pipe, & 750 mm in vertical length & 900 mm in horizontal length including base plate and steel fastners in the toilets as per manufacturers specification complete as per drawings and ''Harmonised Guidelines & Space Standard for Barrier Free Environment issued by MOUD, Govt Of India" to make them Accessible for Persons with Disabilities. Rate shall include all accessories, labour and material, complete for all levels and all heights as per direction of Engineer-in-charge.
8
-
-
Providing & fixing 6mm thick lacquered glass of Saint Gobain or Equivalent Make fixed with compatible neutral core silicon / double sided tape on a perfectly leveled 12mm thick water proof plywood which is mounted on the RCC wall/any other structure. Lacquered glass shall be annealed premium GRIHA rated of approved color by engineer-in-charge, must be made industrially (via curtain coating process); opaque (if viewed against a support wall), coated with PU lacquer (25 micron thick); color consistency (measured by Minolta spectrophotometer CM5081); highly durable (passes PERSOZ hardness test for minimum 220 oscillations); humid resistant (conforms to BS EN 1036 1999); environmentally friendly (no lead, no arsenic, no copper, no formaldehyde); appropriate recycled content (12% post industrial / 6% post consumer); compressive strength (1000 MPa) & tensile strength (40 MPa),same as float glass to all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.
58
-
-
Providing and fixing frameless mirror of superior quality plate glass 6mm thick of approved make and size approximately 600 x 1200 mm or as mentioned in drawings with 25mm wide beveled edges fixed to wall with 22-25mm dia Stainless steel spacer studs in silver finish complete as per drawings and specifications and for all heights and all levels as per the direction of Engineer-In-Charge.(Rate includes SS Studs, edge polishing and all as mentioned above to execute above item)
59
-
-
Providing and fixing powder coated extruded Aluminium section ( 50 micron coating) in louvered grills, upto 300mm height as per design
3
-
-
Providing & Fixing High Impact and moisture, oil and UV Light resistant Heavy Duty Rubber Angled Corner Guard as per the approval from Architect for columns at parking area size W100x100mm, H1000mm & 10mm thickness. Colour and finish: Black in a uniform quality and free of any foreign substance with yellow or White Reflective Stickers Body Material: Modified Thermoplastics (100% Recycled Polymer Rubberized) Fixing: Fixed on the wall & corner of columns with six 2" Screws. Contractor to provide minimum of 5 years warranty certificate from the original manufacturer against any material and manufacturing defects. Make and Model - Frontier Polymer FCG-100D or Equivalent
1074
-
-
Providing and fixing Heavy Duty Traffic Calming 100% Recycled Rubber Speed Breakers/Bumps of Size 350 W x 500 L x 50 H mm yellow black color as shown in the drawing with necessary fittings & fixtures as directed by EIC. Contractor to provide minimum of 5 years warranty certificate from the original manufacturer against any material and manufacturing defects.
25
-
-
Providing and fixing Heavy Duty Traffic Calming SPEED RETARDERS / BUMPS size 250mm long, 350mm wide, 50mm height, hexacore design, oil & chemical resistance, UV stabilized, non fading black and yellow colours, Reflectors type 2 pcs , in one length of 250mm, Top surface to be chequered Texture for better grip, made from high impact and tear resistant polymer for speed reduction on driveways, including testing for each location. All works required including civil and otherwise to prepare the surface for mounting are included and nothing extra will be paid. Speed bumps shall be bolted onto the concrete flooring, as per the recommendation of the OEM and proper documentation needs to be provided for the same. Contractor to provide minimum of 5 years warranty certificate from the original manufacturer against any material and manufacturing defects. "Make - Frontier Polymers Pvt. Ltd. Model - FSB - 235" or equivalent
158
-
-
Providing and fixing TRAFFIC OUTDOOR CONVEX MIRRORS of approved make and as per the approval of Architect 60 cm dia having 130 degree viewing angle, polycarbonate construction with all mounting and installing assembly. All works required including civil and otherwise to prepare the surface for mounting are included and nothing extra will be paid.
20
-
-
Providing and fixing Heavy Duty WALL GUARD / RUBBER WALL PROTECTOR EMBEDDED WITH REFLECTIVE MATERIAL size 1000mm ling 200mm wide and 12mm thick for vertical surfaces like Ramp walls, driveway division civil barrier or vertical walls or other places including testing for each location. All works required including civil and otherwise to prepare the surface for mounting are included and nothing extra will be paid. Contractor to provide minimum of 5 years warranty certificate from the original manufacturer against any material and manufacturing defects. -Make - Signxpress India Model - SKU: SI-RWG-01 or equivalent
500
-
-
Providing and fixing Heavy Duty RUBBER / PLASTIC / POLYMER PARKING BLOCKS of Size 545mm long 150mm wide, 100mm height, oil resistance, chemical resistance, UV stabilized, non fading colours, deep anchoring with screw for Each Parking Bay including all types. 2 nos to be installed in each parking bay as per drawing complet for all levels and all heights. Contractor to provide minimum of 5 years warranty certificate from the original manufacturer against any material and manufacturing defects- Make - Frontier Polymers Pvt. Ltd. Model - FPB - 54D or equivalent
800
-
-
Wall Signage and Graphics as per drawings Including supply, installation, execution, for each location. All works required including civil and otherwise to prepare the surface for fresh paint are included and nothing extra will be paid. Paint application can be sprayed or trowel. Base finished coat for the entire surface is covered in Sr No 3.1. This item is only for Painting the graphics on the finished wall signage Graphic as per drawing, including Alpha numeric character and any special character, or iconography all as per design drawings, character height as per the drawings and specific characters as approved with clients. The job needs to be done using stencil template as per design. Multiple stencils can be used to create one Signage Graphic in one location. All ancillary works including preparation of stencil, upto 2 mockups for approval and other necessary items and works are inclusive and nothing extra will be paid. The virtual boundary rectangle of the graphic as mentioned in the drawing will be measured and paid in Sqm. Minimum guaranteed use of a individual stencil are 2 locations as required.
530
-
-
Providing and fixing medium class mild steel pipe sleeves in RCC beams at the time of casting - nominal bore 80mm dia
100
-
-
Providing and fixing medium class mild steel pipe sleeves in RCC beams at the time of casting - nominal bore 100mm dia
100
-
-
Providing and fixing medium class mild steel pipe sleeves in RCC beams at the time of casting - nominal bore 150mm dia
18
-
-
Providing and fixing medium class mild steel pipe sleeves in RCC beams at the time of casting - nominal bore 200mm dia
12
-
-
Providing and fixing ceramic white writing boards of approved make with aluminium beading profile size 1200mm x 900mm .
3
-
-
Providing and fixing pin up board on walls made from 12mm thick cellotex board covered with approved fabric and ufoam underlay without beading. Basic rate of fabric 150 per metre.
7
-
-
Drilling with Hilti core cutting machine in RCC slabs, walls etc. Wherever required in buildings, manholes, ducts, water tanks, pits etc. for laying pipes, sleeves and making good the same to give an even finish . The rate shall include the cost of drilling core, providing EPOXY based water proofing compound for sealing the joints around the pipes, nominal reinforcement wherever required, scaffolding and labour charges for working at all levels ,leads and heights . (Maximum thickness of RCC members shall be 300mm) and as directed by Engineer-In-Charge.
-
-
-
Upto 25mm dia
10
-
-
Above 25mm to 50mm dia
25
-
-
Above 50mm to 75mm dia
50
-
-
Above 75mm to 100mm dia
50
-
-
Above 100mm to 150mm dia
100
-
-
Above 150 mm to 200mm dia
25
-
-
Above 200 mm to 250mm dia
20
-
-
Above 250 mm to 300mm dia
10
-
-
ROAD WORK, PARKING, PATHWAYS
-
-
-
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.
2792
-
-
Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density).
760
-
-
Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge.
-
-
-
Mandatory/ Regulatory sign boards of 900 mm diameter with support length of 3750 mm
8
-
-
Cautionary /warning sign boards of equilateral triangular shape having each side of 900 mm with support length of 3650 mm
8
-
-
Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.
1080
-
-
Providing, laying and making kerb channel 30 cm wide and 50 mm thick with cement concrete 1:3:6 (1 cement: 3 coarse sand:6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth etc. complete and as per direction of Engineer-in-charge.
119
-
-
Providing and applying hot applied thermoplastic road marking material with glass beads extremely high skid resistance 2.5mm thick with primer coat (tack coat) for binding on cement concrete road/paver blocks surface. All labour materials with special aggregates etc, as specified in B.S. part-I & II 1989 and carrying out the marking on any road on center line and other lane marking continuous for intermittent 10cm, 15 cm or 20cm width and also pedestrian crossings stripes as well as spraying further quality of glass beads of type II uniformly into a mono layer on to the hot paint line in quick succession of the paint spraying operation @ 250gms per sq.mt. area as directed and as per B.S./M.O.S.T. specification in white/yellow colour.as per the approval of Architect and drawings complete for all levels and all heights as per the direction of Engineer-in-Charge.
1133
-
-
Painting lines, dashes, arrows, etc. on roads in two coats on new work with ready mixed road marking paint conforming to IS:164 on bituminous/concrete surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as per drawing and MoRD Technical Specification Clause 1702
200
-
-
Kerbstone and Saucer Drain
-
-
-
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete of make VYARA, UNISTONE, DALAL TILES, NITCO, ULTRA, DURACRETE, KK MANHOLE & COVERS, TERRA FIRMA, or PAVIT in position to the required line, level and curvature, size and shape as per the approval of Architect jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
165
-
-
(Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately).
-
-
-
Providing and laying at or near ground level factory made M25 Grade Concrete Saucer Drain Channel Perforated/Non-Perforated type of make VYARA, UNISTONE, DALAL TILES, NITCO, ULTRA, DURACRETE, KK MANHOLE & COVERS, TERRA FIRMA, or PAVIT of size 300-350mm(W) x 500-600mm(L) x 100-125mm thickness and shape, finish as per approval.
45
-
-
CC Flooring
-
-
-
Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in-charge. (The panel shuttering work shall be paid for separately).
276
-
-
Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.
-
-
-
With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30
152
-
-
With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25
152
-
-
Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.
300
-
-
Barricading
-
-
-
Providing and erecting 2.00 metre high temporary barricading at site; each panel of size 2.50mx2.00m made of 40x40x6mm angle iron or 50x50x3mm hollow MS tube posts/horizontal members/bracings covered with 1.63mm thick MS sheet. The sheet shall be fixed with 30x5mm MS flat by suitable welding/riveting. The panels shall be made so that gap of 50cm above the ground is available making overall height as 2.5m. MS channel ISLC 75 @ 5.70 kg/m, 50cm long shall be provided at the bottom having oval shaped holes of size 50x25mm at both ends with 50cm long MS angle 40x40x6mm bracing. Suitable arrangement shall be made to fix the barricading to avoid from overturning by providing 250mm long expansion fasteners at both ends. The work shall be executed as per drawing/direction of Engineer- in-Charge which includes writing and painting, arrangement for traffic diversion such as traffic signals during construction at site for day and night, glow lamps, reflective signs, marking, flags, caution tape as directed by the Engineer-in-Charge. The barricading provided shall be retained in position at site continuously i/c shifting of barricading from one location to another location as many times as required during the execution of the entire work till its completion. Rate include its maintenance for damages, painting, all incidentals, labour materials, equipment's and works required to execute the job. The barricading shall not be removed without prior approval of Engineer-in-Charge.
850
-
-
(Note :- One time payment shall be made for providing barricading from start of work till completion of work i/c shifting. The barricading provided shall remain to be the property of the contractor on completion of the work).
-
-
-
Granite Flooring
-
-
-
Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer- in-Charge.
-
-
-
Polished Granite stone slab Jet Black, Galaxy black, Alaska White, Titanium White, Imperial white, River white, Colonial Whie, Kashmir Gold, Crystal Yellow, Cherry Red, Elite Brown, Cat Eye, Bash Paradiso, Adhunik Brown, Chiku Pearl or equivalent of area less than 0.50 sqm
250
-
-
Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red like Steel Grey, Tan Brown, S White, P White, Pearl White, Desert brown or equivalent of area less than 0.50 sqm
300
-
-
Tactile Tile
-
-
-
Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.
195
-
-
Providing and laying cement concrete (M30 grade) tactile tile such as directional, warning or hazardous (for vision impaired persons as per standards) of size 300x300x60 mm {60 mm base + (5mm ± 0.5mm) thick raised portion} having water absorption ≤ 6% and conforming to IS: 13801, of approved make in all colours (preferably yellow) and shades for footpath laid on 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. (The thickness of wearing layer should not be less than 8mm) and as per harmonized guidelines and space standards for barrier free built environments for persons with disability and elderly persons issued by Ministry of Urban Development, Govt. of India complete as per direction of Engineer-in-Charge.
50
-
-
Providing and laying cement concrete (M40 grade) tactile tile such as directional, warning or hazardous (for vision impaired persons as per standards) of size 300x300x30 mm {25 mm base + (5mm ± 0.5mm) thick raised portion} having water absorption ≤ 6% and conforming to IS: 13801, of approved make in all colours (preferably yellow) and shades for footpath laid on 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. (The thickness of wearing layer should not be less than 8mm) and as per harmonized guidelines and space standards for barrier free built environments for persons with disability and elderly persons issued by Ministry of Urban Development, Govt. of India complete as per direction of Engineer-in-Charge.
50
-
-
CC Paver Blocks
-
-
-
Providing and laying factory made chamfered edge Cement Concrete paver blocks of make UNISTONE, DALAL TILES, NITCO, ULTRA, DURACRETE, KK MANHOLE & COVERS, TERRA FIRMA, PAVIT in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. -60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.
262
-
-
Providing and laying factory made chamfered edge Cement Concrete paver blocks of make UNISTONE, DALAL TILES, NITCO, ULTRA, DURACRETE, KK MANHOLE & COVERS, TERRA FIRMA, PAVIT in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU moulds, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. -80mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.
100
-
-
Granite Cobble
-
-
-
Providing and fixing 10x10x7.50 cm Granite stone block of any colour and shade as per approval, hand/machine cut with straight edges and chisel dressed/smooth finish/leather finish/flamed finish on top, for paving in floors, drains etc. in all kinds of patterns i/c. curvilinear patterns as per drawings laid over 20mm thick base mortar 1:4 (1 cement : 4 coarse sand) with joints 10mm wide filled with same mortar including ruled pointing etc. complete as per direction of Engineer-in-charge.
629
-
-
30mm flamed/honed granite steel grey finish stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
100
-
-
Kota Stone
-
-
-
25mm thick Sand or Shot blasted finish Kota stone slab flooring in various shades (Green, Brown, Blue, Yellow) as per the approved sample and in various sizes and pattern as per the architectural drawings laid with joints 6 to 10mm wide filled with cement mortar mixed with pigment to match the shade of the stone slab including ruled pointing etc over 20 mm (average) thick base laid over and including cleaning etc complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand):
428
-
-
25mm thick Leather finish Kota stone slab flooring in various shades (Green, Brown, Blue, Yellow) as per the approved sample and in various sizes and pattern as per the architectural drawings laid with joints 6 to 10mm wide filled with cement mortar mixed with pigment to match the shade of the stone slab including ruled pointing etc over 20 mm (average) thick base laid over and including cleaning etc complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand):
150
-
-
Granite Flooring
-
-
-
Providing and laying gang saw cut 40 mm thick, Lapato finish machine cut steel grey granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer- in-Charge.
100
-
-
Supply and application of Polyurethane based, UV resistant, chemical resistant high abrasive resistant semi viscous liquid with 2 component material in 4:1 ratio Line marker coating shall be apply over and above of traffic coating using roller / brush. -Directional Arrows - sizes as per drawings outer to outer 750mm x 300mm 100mm wide ( RAL 9003, Signal White - or as per mockup)
600
-
-
Supply and application of Polyurethane based, UV resistant, chemical resistant high abrasive resistant semi viscous liquid with 2 component material in 4:1 ratio Line marker coating shall be apply over and above of traffic coating using roller / brush. - Pedestrian pathway Arrows 150 to 200 wide / thick- Sizes and shape as per drawings, including executing in straight or curved path. (RAL 9003, Signal White - or as per mockup)
3600
-
-
DISMANTLING WORK
-
-
-
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
20
-
-
Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer-in-charge.
10
-
-
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
50
-
-
Demolishing brick/block work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar
20
-
-
Non-Schedule Items - Civil
-
-
-
Polyurethane Flooring: 6mm Thick PU Floor
Polyureathane Resin iron filled floor Screed System of MATT FINISH at 6.0mm Surface Preparation : Providing and roughening the smooth surface to provide the
mechanical key for subsequent application, grinding all sharp edges to make them flush with the surface, making groove of 12mm X 12mm in size at approximately 100mm awayparallel from wall and adjacent to doorways, covering not more than 20 Smtr, cleaning the all floor area to make it free from all dirt, dust and other contaminants, etc and completeas per manufacturer's specifications.
Scratch Coat: - Providing and installing APCOFLOR PU CRETE 4K XL at 1mm thick as scratchcoat using flat trowel by mixing all 4 components and colour pigment in mixing vessel using heavy duty slow speed drilling machine fixed with mixing paddle, etc and complete as per manufacturer's specification.
Top coat: Supply and apply of APCOFLOR PU CRETE 4K XL Polyurethane Floor Topping on Concrete Floor. The floor concrete should be prepared with scarification or captive shot blasting process. The dust and debris to be removed by Industrial Vacuum Cleaner. Anchor Grooves to be cut of size 1.5 to 2 times the thickness of the floor topping. Along the perimeter of floor topping, around columns, open drains, along construction joints, cable trenches, etc., Open up all the cracks in to anchor grooves. Fill all the anchor grooves with APCOFLOR PU CRETE 4K XL Screed material. Provide a scratch coat of APCOFLOR PU CRETE 4K XL @ 2 to 2.25 kg per Sqm with groove filling, allowing to cure overnight. Complete the topping with APCOFLOR PU CRETE 4K XL @ 2 kg per Sqm/mm. Allow to cure for the necessary period as per Manufacturers Instructions.
11000
-
-
Supply of 2 Level Stack Parking System with Hydraulic based Technology accommodating 2 Cars per module with car carrying capacity of 2000 kg on platform and Car Dimension of 5000 mm length x 2000 mm height (SUV) at Ground level, with average retrieval/parking time not more than 50 seconds. Power pack motor capacity of 1.5 KW, platform thickness 1.5MM, Entry plate and Side Member thickness 3MM. Manufacturing standard; all welding should be TUV certified. One power Pack connected to 5-7 Units
Having following safety features as
1. Mechanical locks at every 100MM from Ground to platform level.
2. Platform arrangement with support structure.
3. Mechanical locks at every 100MM from Ground to platform level.
4. All Hydraulic/Electrical pipe will be covered with GI Channel pipe cover.
5. Hydraulic NRV value should be placed at ground level for easy manual rescue of cars.
6. Chain Magnet Cover plate on each unit.
7. Tyre stopper
8. Vairous Platform Width as per site conditation i.e. 2100MM to 2400MM
9. Pregalvanized item: Platform Side Member, Platform, Chain cover, Pipe cover
10 Sensor if required
284
-
-
Glass Reinforced Concrete (G.R.C) Screens/ Jali
Providing and fixing Glass Reinforced Concrete (G.R.C) Screens/ Jali customized as per design, dimensions as per drawings in approved shade in overall thickness of 40mm, or inner design membrane between 30-35mm and borders 50mm, casted with layering technique Power Spray methodology have weight approximately between 3.75 -4.5 Kg
per Sq. Ft. The screens casting shall take place with layering methodology using- Direct Power Spray machines. The screens shall be casted from 53 grade White Portland Cement manufactured by Fine graded, sieved Quartz & Silica Sand, reinforced with Alkali Resistant Glass Fiber manufactured between 4-5% by having Zirconia content at least 16%, Super Plasticizers and UV resistant Synthetic inorganic pigments should be used for pigmentation.
298.8
-
-
Providing signage viz display/name plate and like of required size made out of 20 guage thick stainless steel (304 grade) including engraved subject matter, message (Hindi/English and / or bilingual), symbols, borders and logo etc. The engraved letter, borders etc. to be furnished with paint etc. of reqyured colour scheme and the plate to be fixed to wooden/wall surface with 25mm long stainless steel spacer/stud all complete as per direction of Engineer in Charge.
1550
-
-
Graffiti painting on wall as approved logo by high gloss acrylic colour before making logo, prepare the surface clean, fill POP in voids, apply 1mm white birla putty and primer including material, labour and T&P etc. all complete under instruction of Engineer-in-charge.
115.94
-
-
PART-II LANDSCAPE : HORTICULTURE & SOFTSCAPE
-
-
-
EARTHWORK
-
-
-
Uprooting rank vegetation and weeds by digging the area to a depth of 60cm removing all weeds and other growth with roots by forking repeatedly, breaking clods,rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts as per Schedule of Rates,Analysis of Rates and Specifications (Horticulture & Landscaping) 2020 and direction of Engineer in Charge.
1165
-
-
Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation as per Schedule of Rates,Analysis of Rates and Specifications (Horticulture & Landscaping) 2020 and direction of Engineer in Charge.
388.33
-
-
Rough dressing the trenched ground including breaking clods as per Schedule of Rates,Analysis of Rates and Specifications (Horticulture & Landscaping) 2020 and direction of Engineer in Charge.
1165
-
-
Supplying and stacking of good earth at site including royalty and carriage up to 5 km as per Schedule of Rates,Analysis of Rates and Specifications (Horticulture & Landscaping) 2020 and direction of Engineer in Charge.
349.5
-
-
TREES & SHRUBS
-
-
-
Digging of pit for trees in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge flooding with water, dressing including removal of rubbish and surplus earth, if any with all leads and lifts (upto 0.6mX 0.6mx 0.6m) for trees etc. complete as per Schedule of Rates,Analysis of Rates and Specifications (Horticulture & Landscaping) 2020 and direction of Engineer in Charge.
54
-
-
Digging of pit for small plants /shrubs in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge flooding with water, dressing including removal of rubbish and surplus earth, if any with all leads and lifts etc. complete as per Schedule of Rates,Analysis of Rates and Specifications (Horticulture & Landscaping) 2020 and direction of Engineer in Charge.
30
-
-
Supplying and planting below mentioned best quality container- grown healthy trees of species as specified and with an average height and as age as mentioned as per Schedule of Rates,Analysis of Rates and Specifications (Horticulture & Landscaping) 2020 and direction of Engineer in Charge. All trees to be approved by Engineer-in-Charge before planting.
-
-
-
Neem of height 3m - 4m (3 to 4 years old) well developed with thick stem
10
-
-
Karanja of height 4m -5m (3 to 4 years old) well developed with thick stem
10
-
-
Akashmalli of height 3m - 4m (3 to 4 years old) well developed with thick stem
10
-
-
Amla of height 3m - 4m (3 to 4 years old) well developed with thick stem
5
-
-
Mango of height 4m -5m (3 to 4 years old) well developed with thick stem
5
-
-
Kochila of height 4m -5m (2 to 3 years old) well developed with thick stem
4
-
-
Champa (white,red, pink) of height 3m-4m (2 to 3 years old) well developed with thick stem
2
-
-
Baul of height 4m -5m (3 to 4 years old) well developed with thick stem
2
-
-
Ashoka of height 4m -5m (3 to 4 years old) well developed with thick stem
1
-
-
Arjun of height 3m-4m (2 to 3 years old) well developed with thick stem
1
-
-
Bahunia purpurea (kanchan) of height 4m-5m (3 to 4 years old) well developed with thick stem
2
-
-
Peepal/ Banyan Tree of height 4m -5m (3 to 4 years old) well developed with thick stem
2
-
-
Supplying and planting below mentioned best quality container- grown healthy shrubs/plants of species as specified and with an average height and as age as mentioned as per Schedule of Rates,Analysis of Rates and Specifications (Horticulture & Landscaping) 2020 and direction of Engineer in Charge. All trees to be approved by Engineer-in-Charge before planting.
-
-
-
Aparajita (black & height) of height up to 1 mtr (1 to 2 yrs) old
5
-
-
aswagandha of height up to 2 mtr (1 to 2 yrs) old
5
-
-
dhannantari of height up to 2 mtr (1 to 2 yrs old)
4
-
-
ganga siuli of height up to 2 mtr (1 to 2 yrs old)
2
-
-
kamini of height up to 1 mtr (1 to 2 yrs old)
5
-
-
mandar of height up to 1 mtr (1 to 2 yrs old)
4
-
-
rukunaa hatapochaa of height up to 1 mtr (1 to 2 yrs old)
1
-
-
sadabihari (red & white) of height up to 1 mtr (1 to 2 yrs old)
2
-
-
Jasmine of height up to 1 mtr (1 to 2 yrs old)
2
-
-
GROUND COVERS
-
-
-
GRASS AREAS [pusa SELECTION 1 GRASS]
-
-
-
Grassing with broad leaf grass (Axonopus compressus), free from weeds & having proper roots including earth filling, fertilizer, watering, labour charges, curation and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and filt for mowing including supplying good earth if needed as per Schedule of Rates,Analysis of Rates and Specifications (Horticulture & Landscaping) 2020 and direction of Engineer in Charge.
1165
-
-
FERTILIZERS
-
-
-
Supply and applying of chemical fertilizer before or after as per requirement, as per Schedule of Rates,Analysis of Rates and Specifications (Horticulture & Landscaping) 2020 and direction of Engineer in Charge.
-
-
-
Urea / Ammonium Sulphate (30gm/M²)
34.95
-
-
Bone Meal (150gm/M²)
174.75
-
-
Potassium Sulphate or Murate of Potash (20gm/M²)
23.3
-
-
Provision of insecticides (10ml IN 10 ltr/M²)
11.65
-
-
PLUMBING AND FIRE
-
-
-
Sanitary Fixtures & CP Brass Fittings
-
-
-
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required :
-
-
-
Kitchen sink with drain board 510x1040 mm, bowl depth 200mm.
5
-
-
Providing and fixing P.V.C. Waste pipe for sink or wash basin including P.V.C. waste fittings complete.
-
-
-
Semi rigid pipe
-
-
-
40 mm dia.
5
-
-
Providing and fixing of white vitreous china extended wall mounted water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3/6 litre (adjustable to 4/8 litre), including seat cover and cistern fittings, nuts, bolts and gasket etc complete.
2
-
-
Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water ( 250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge..
18
-
-
Providing, fixing, testing & commissioning of white Vitreous china wall hung European type water closet with P trap, with lid , seat cover with CP bolts, nuts, concealed cistern with Face plate ,CP brass hinges and rubber buffers , WC pan connector / flush pipe with clamp and adapter rubber joint & necessary fittings screws and washers complete including cutting and making good the walls and floors where required.
-
-
-
Wall Hung WC with seat cover Kohlar Model- K-K-30438IN-0 + WC Connector Kohlar Model - K-1046327-S + Concealed Flushing Cistern Kohlar Model- K-26352IN-M-NA+Face Plate for Cistern Kohlar Model-K-20189IN-P-CP, WC Chair Bracket Kohler Model-K-1225108-0 or Equivalent.
35
-
-
Providing and fixing white vitreous china wash basin with special fabricated brackets painted white, faucets as required, 32 mm C.P. brass waste.32 mm C.P. brass bottle trap & pipe to wall with rubber adopter for waste connection and C.P. brass wall flange complete in all respects including cutting and making good the walls where required.
-
-
-
Under Counter Wash basin Kohlar Model No.: K-2215IN-2-0 , 32 mm CP brass waste Kohlar Model No. K-45432IN-CP, 32 mm C.P. brass bottle trap with pipe to wall and C.P. wall flange Kohlar Model. No. K-75823IN-CP or approved equivalent.
28
-
-
Flat Back Wash basin Kohlar Model No.:K-30520IN-0 , 32 mm CP brass waste Kohlar Model No. K-45432IN-CP, 32 mm C.P. brass bottle trap with pipe to wall and C.P. wall flange Kohlar Model. No. K-75823IN-CP or approved equivalent.
8
-
-
Providing and fixing 15mm C.P brass Pillar Foucet Kohlar Model. No. K-75377IN-4-CP or approved equivalent for Wash Basin Including cutting and making good the walls wherever required.
36
-
-
Providing and fixing 15mm C.P. copper connecting pipe 450mm long with C.P. brass nuts, washers complete in all respects.(Jaquar Cat No. ALD 803AB or approved equivalent)
73
-
-
Providing and fixing C.P. brass 15 mm nominal bore two way bib cock Kohlar Model-K-25432IN-4-CP or Equivalent.
37
-
-
Providing and fixing C.P. brass 15 mm nominal bore one way bib cock Kohlar Model-K-16093IN-4-CP or Equivalent.
14
-
-
Providing and fixing C.P. brass 15mm nominal bore angle valve Kohlar Model- K-80154IN-4AV-CP or Equivalent for basin mixer and geyser points.
73
-
-
Providing and fixing C.P. cast brass twin coat hooks fixed to PVC rawl plug with SS screws Kohlar model. No. K-25073IN-CP or approved equivalent.
37
-
-
Providing and fixing health faucet with 1 m long flexible tube and wall hook including all fittings Kohlar model No.K-12925IN-CP or approved equivalent.
37
-
-
Providing and fixing 15mm C.P brass Sink Mixer Kohlar Model. No. K-99483IN-A4-CP or approved equivalent.) for kitchen sink with swinging spout complete. Including cutting and making good the walls wherever required .
5
-
-
Providing and fixing C.P brass toilet paper holder Kohlar Model. No. K-5633IN-CP or approved equivalent,Including cutting and making good the walls wherever required.
37
-
-
Providing and fixing liquid dispenser including all fittings complete.(Kohlar Model-K-10712D-CP)
36
-
-
Providing and fixing Grab Bar Kohlar Model No. K-10701D-CP or approved equivalent,Including cutting and making good the walls wherever required
8
-
-
Providing and fixing Hand Rail Euronics model. No. EGR S02 or approved equivalent,Including cutting and making good the walls wherever required
8
-
-
Providing and fixing fully automatic Hand dryer Euronics Model-EH 26 NW or equvalant ,including all fittings complete in all respect.
9
-
-
Providing and fixing Air Purifier Euronics Model-EA 24 or equvalant ,including all fittings complete in all respect.
37
-
-
Providing and fixing 150 litre/ hr. cooling and storage capacity,fully stainless steel electric storage type water cooler ( Blue Star model No. SDLX 15150 or equvalant) with inlet hose connection inbuilt float valve. 2 Nos. outlet foucet, drain tray with waste and pipe up to fllor trap heavy compressor and wire up to socket, 3 pin plug etc complete in all respect.
5
-
-
Supplying, installation, testing and commissioning of skid mounted fully automatic Reverse Osmosis System of output capacity 50 litres / hour designed at a minimum Flux at inlet complete as required.
5
-
-
Providing and fixing vertical storage type hot water heater fixed to wall with anchor bolts & nuts, 15mm CP brass angle stop cock and 15mm CP brass non-return valve complete including making connections with 15mm dia CP connecting pipes on inlet and outlet, suitable length of power cable and 15 amps plug (Venus or approved equivalent).
-
-
-
Capacity 25 Litres Model 25 GV
5
-
-
Soil, Waste, Vent & Rain Water Pipes
-
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering. All work up to plinth.
-
-
-
1:2:4 ( 1cement : 2 Coarse sand : 4 graded stone aggregate 20 mm nominal size )
1
-
-
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
10
-
-
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
10
-
-
Providing and fixing sound-insulating mineral reinforced 3 layer polypropylene pipes with all fitting, ie. elbows, reducing elbows, Plain or Door Tees, Junctions, Cowls, Reducers, door pieces and other reducing fittings as required for internal drainage system suitable for above & below ground installation. Conforming to 12056,DIN EN752, DIN1986-100, and DIN EN1610. Tensile strength of the pipes is DIN EN accordance to DIN EN ISO 527-3. The pipe connections are leak-proof up to an internal excess water pressure of 1.0 bar.Fire behaviour for the system is In accordance with EN 13501-1, D,S3-dO Fulfils the requirements of VDI guideline 4100 with excellent results (less than 20 db Installation sound level measured in the basement test room UG rear). Connection having Push fit socket with factory installed lip sealing ring, including all GI hot dipped hangers/ supprts for Horizontel Pipes/ Vertical Pipes in shafts as per sample approved by Project Manager..
-
-
-
75 mm OD
75
-
-
110 mm dia.
435
-
-
160 mm OD
95
-
-
Providing and fixing in position 110x63 mm uPVC reducing elbow including trimming to size and fixing to floor with PCC 1:2:4. (1cement: 2 coarse sand: 4 aggregate 10 mm size).
26
-
-
Providing and fixing in position 150x150 mm stainless steel grating for floor trap/floor drain including fix to floor with cement mortar.
80
-
-
Providing and fixing inlet fitting by cutting holes 40/50/63 mm OD as required in, 110 OD upvc pipe as per diameter of branch waste and sealing with m seal or PVC welding ( contractor should ensure leak proof joint) after insertion pipe to 110 mm dia pipe and to fixing to 'P' trap to make a leak proof joint complete.
54
-
-
Providing and fixing PP clean out plug including required fittings.
-
-
-
110 mm OD.
20
-
-
160 mm dia.
26
-
-
Providing and fixing of GI split pipe support clamps with EPDM rubber lining, Zinc plated for support of vertical/hanging horizontal soil, waste, vent and rain water pipes, embedded in walls with anchor fastner, including recommended size GI threaded rod of required length etc. including cost of cutting holes and making good the walls complete in all respects.
-
-
-
For 75 mm dia Pipe (Thickness of clamp 1.7 mm)
16
-
-
For 100 mm dia Pipe (Thickness of clamp 2.0 mm)
148
-
-
For 150 mm dia Pipe (Thickness of clamp 2.0 mm)
308
-
-
Providing and fixing uPVC agricultural pipes conforming to IS:4985 (6 kg/sqcm) including all fittings, e.g. couplings, tees, bends, reducers and screwed adoptors jointing with solvent cement joint as per manufacturers' recommendations. [for Waste Connections & Rain Water Pipes]
-
-
-
40 mm OD
70
-
-
63 mm OD
70
-
-
110 mm OD
355
-
-
160 mm OD
1190
-
-
Providing and fixing Polyproplelene (PP) P-Trap including setting with cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 hand stone ballast 20 MM nominal size) the inlet from floor level to trap rim to be grouted and cemented neat manner including cutting and making good the floor & wall wherever required complete in all respects.
-
-
-
110 mm inlet and 110 mm outlet.
54
-
-
Providing and fixing Slotted uPVC agricultural pipes conforming to IS:4985 (10 kg/sqcm) including all fittings, e.g. couplings, tees, bends, reducers and screwed adoptors jointing with solvent cement joint as per manufacturers' recommendations & wraping with Geotextile cloth.
-
-
-
75 mm OD
240
-
-
Providing, laying, testing & commissioning of 'B' class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :
-
-
-
80 mm dia.
390
-
-
Water Supply System
-
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
-
-
-
Concealed work including cutting chases and making good the walls etc.
-
-
-
20 mm nominal outer dia .Pipes.
600
-
-
25 mm nominal outer dia .Pipes.
125
-
-
32 mm nominal outer dia .Pipes.
185
-
-
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.
-
-
-
Internal work - Exposed on wall
-
-
-
20 mm dia nominal bore
90
-
-
25 mm dia nominal bore
120
-
-
32 mm dia nominal bore
125
-
-
40 mm dia nominal bore
10
-
-
50 mm dia nominal bore
100
-
-
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :
-
-
-
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
10
-
-
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
-
-
-
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
5
-
-
Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work :
-
-
-
20 mm dia nominal bore
90
-
-
25 mm dia nominal bore
120
-
-
32 mm dia nominal bore
125
-
-
40 mm dia nominal bore
10
-
-
50 mm dia nominal bore
100
-
-
Providing and fixing enclosed type water meter (bulk type) conforming to IS : 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The tail pieces if required will be paid separately) :
-
-
-
80 mm dia nominal bore
1
-
-
Providing and fixing C.I. dirt box strainer for bulk type water meter with nuts, bolts, rubber insertions etc. complete conforming to IS : 2373 :
-
-
-
80 mm dia nominal bore
1
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
-
-
-
External Work
-
-
-
25 mm nominal dia Pipes
65
-
-
32 mm nominal dia Pipes
115
-
-
40 mm nominal dia Pipes
20
-
-
50 mm nominal dia Pipes
150
-
-
65 mm nominal dia Pipes
65
-
-
80 mm nominal dia Pipes
60
-
-
Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in external work :
-
-
-
25 mm diameter pipe
65
-
-
32 mm diameter pipe
115
-
-
40 mm diameter pipe
20
-
-
50 mm diameter pipe
150
-
-
65 mm diameter pipe
65
-
-
80 mm diameter pipe
60
-
-
Providing and fixing forged brass ball valve of brass body with hard chrome plated steel ball inside PTFE (Teflon) seat & ring with chrome plated centre handle with female BSP threads complete in all respects.
-
-
-
20 mm nominal bore
16
-
-
25 mm nominal bore
29
-
-
32 mm nominal bore
6
-
-
40 mm nominal bore
2
-
-
50 mm nominal bore
2
-
-
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :
-
-
-
65 mm dia
1
-
-
80 mm dia
1
-
-
Providing and fixing Thermoflex or Kaiflex thermal insulation tubing a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber over pipes of following nominal bores and thickness including all required accessories complete as per specification.
-
-
-
6 mm thick (Concealed Pipes)
-
-
-
For 20 mm dia Pipe
20
-
-
Providing and fixing forged brass single acting air release valve with screwed inlet 25 mm dia.
2
-
-
Providing and fixing threaded end brass digital water meter complete in all respect.
-
-
-
32 mm dia.
4
-
-
50 mm dia.
2
-
-
Providing & Fixing of 16 mm/30cm/2lph PCdripline, Pressure-compensating range: 0.5-4.0 bar which Precise and equal amounts of water are delivered over a broad pressure range, 100% uniformity of water and nutrient distrient distribution along the laterial. Dripline have largest filter in each dripper, Recommended filtration: according to drippers flow rate, Double TurboNet: Ladyrinthbwith large water passage. The water is drawn into the dripper from the stream center, preventing the entrance of sediments into the drippers.
935
-
-
Sewerage System
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
-
-
-
All kinds of soil
107
-
-
Excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed, within a lead of 50m.
-
-
-
All kinds of soil
-
-
-
Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia.
165
-
-
Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5m, but not exceeding 3m. (Rate is over corresponding basic item for depth upto 1.5 metre).
-
-
-
Pipes, cables etc, exceeding 80mm dia but not exceeding 300mm dia
20
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
32
-
-
Extra for every additional lift of 1.5m or part thereof in:
-
-
-
All kinds of soil (Manhole)
10
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)
12
-
-
Providing, laying and jointing HDPE Double Wall Coil (DWC) SN-8 Grade pipes confirming to IS: 16098 including all fittings wherever required e.g., tees, bends of any degree, couplings, adapters, plugs, unions etc. and jointing as manufacturer recommondation etc. including testing of joints etc. complete.
-
-
-
150 mm dia.
5
-
-
200 mm dia.
160
-
-
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:
-
-
-
180x150 mm size P type
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
-
-
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
-
-
-
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
3
-
-
Extra for depth for manholes :
-
-
-
Size 90x80 cm
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
-
-
Constructing brick masonary circular type manhole 0.91m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) in side cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1 :3:6 mix (1 cement : 3 coarse sand : 6 graded 40mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design:
-
-
-
0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560mm internal diameter confirming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) :
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
10
-
-
Extra depth for circular type manhole 0.91m internal dia (at bottom) with beyond 0.91m to 1.67m.
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
4
-
-
Constructing brick masonry circular manhole 1.22m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :
-
-
-
1.68 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) :
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
-
-
Extra depth for circular type manhole 1.22m internal dia (at bottom) beyond 1.68 m to 2.29 m :
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
0.5
-
-
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263 mm and width as 165mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
62
-
-
Storm Water Drainage
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
-
-
-
All kinds of soil
372
-
-
Excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed, within a lead of 50m.
-
-
-
All kinds of soil
-
-
-
Pipes, cables etc. exceeding 80mm dia but not exceeding 300mm dia.
260
-
-
Pipes, cables etc, exceeding 300 mm dia but not exceeding 600 mm dia
70
-
-
Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5m, but not exceeding 3m. (Rate is over corresponding basic item for depth upto 1.5 metre).
-
-
-
Pipes, cables etc, exceeding 80mm dia but not exceeding 300mm dia
50
-
-
Pipes, cables etc, exceeding 300 mm dia but not exceeding 600 mm dia
70
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
112
-
-
Extra for every additional lift of 1.5m or part thereof in:
-
-
-
All kinds of soil (Manhole)
30
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)
14
-
-
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size) up to haunches of S.W/RCC pipes including bed concrete as per standard design.
-
-
-
250 mm diameter
80
-
-
300 mm diameter
180
-
-
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :
-
-
-
250 mm dia. R.C.C. pipe
80
-
-
300 mm dia. R.C.C. pipe
180
-
-
450 mm dia. R.C.C. pipe
70
-
-
Constructing brick masonary circular type manhole 0.91m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) in side cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1 :3:6 mix (1 cement : 3 coarse sand : 6 graded 40mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design:
-
-
-
0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560mm internal diameter confirming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) :
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
20
-
-
Extra depth for circular type manhole 0.91m internal dia (at bottom) with beyond 0.91m to 1.67m.
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
8
-
-
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263 mm and width as 165mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
80
-
-
Constructing bricks masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design :
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
20
-
-
Extra for depth beyond 45 cm of brick masonry chamber
-
-
-
For 455x610 mm size
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
-
-
Rain Water Harvesting System
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including geting out and disposal of excavated earth, lead upto 50m and lift upto 1.5m, as directed by Engineer-in-Charge.
-
-
-
All kinds of soil
360
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
120
-
-
Extra for every additional lift of 1.5 m or part thereof in.
-
-
-
All kinds of soil.
360
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
14
-
-
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves,chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing & reinforcement with1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size)
8.5
-
-
Centring and shuttering including stutting, propping etc. and removal of form for:
-
-
-
Suspended floors, roofs, landings, balconies and acees platform
60
-
-
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.
-
-
-
Thermo-Mechanically Treated bars of Grade Fe-500D or More.
340
-
-
Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in:
-
-
-
Cement mortar 1:6 (1 cement : 6 coarse sand)
75
-
-
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS: 10910 on 12mm dia steel bar conforming to IS :1786 having minimum cross section as 23 mm x 25 mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruded legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and heaving manufactures permanent identification mark to be visible even after fixing " including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6: (1 cement :3 coarse sand :6 graded stone aggregate 20mm nominal size )complete as per design.
50
-
-
Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality.
-
-
-
HD-20 circular shape 560 mm internal diameter.
6
-
-
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer –in-charge, upto 90 metre depth below ground level.
-
-
-
All types of soil
-
-
-
400 mm dia.
80
-
-
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer –in-charge.
-
-
-
200 mm nominal size dia.
10
-
-
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.
-
-
-
200 mm nominal size dia.
70
-
-
Supplying, filling, spreading & levelling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
15
-
-
Supplying, filling, spreading & levelling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
15
-
-
Supplying, filling, spreading & levelling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer –in-charge.
15
-
-
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
8
-
-
Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.
80
-
-
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:
-
-
-
200 mm dia
2
-
-
Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.
-
-
-
200 mm clamp.
2
-
-
Tubewells
-
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
1:2:4 ( 1cement : 2 Coarse sand : 4 graded stone aggregate 20 mm nominal size )
1
-
-
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer –in-charge, upto 90 metre depth below ground level.
-
-
-
All types of soil
-
-
-
400 mm dia
90
-
-
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer –in-charge, beyond 90 metre & upto 150 metre depth below ground level.
-
-
-
All types of soil
-
-
-
400 mm dia
90
-
-
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
18
-
-
Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of required dia, conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved
brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge.
-
-
-
200 mm nominal size dia having minimum wall thickness 5.40 mm
30
-
-
Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed/ plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer -in-charge.
-
-
-
200 mm nominal size dia
90
-
-
Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.
50
-
-
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:
-
-
-
200 mm dia
1
-
-
Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.
-
-
-
200 mm clamp.
1
-
-
Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I).
-
-
-
200 mm dia
1
-
-
Providing, laying, testing & commissioning of 'B' class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :
-
-
-
80 mm dia.
80
-
-
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :
-
-
-
80 mm dia
1
-
-
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS:5312 complete with rubber gasket, GI bolts, nuts,washers etc.as required :
-
-
-
80 mm dia
1
-
-
Supply, Lowering, installation & testing of KSB make submersible pumping set with 25 HP to 30 HP motor 4/5 stage pump suitable for 45-60 m3 hr. at 60 to 100 mtr. Head respectively. With Three Phase.
1
-
-
Providing & fixing submersible copper cable 6 sq.mm. from submersible pump to panel board.
100
-
-
Providing & fixing Panel Board for submersible pump fitted with DOL starter ammeter, voltmeter single phase preventer standard/indo/cop make MCB of off switch push bottom duly wired and made out of 16/18 SWG sheet.
1
-
-
Water Supply, Drainage Pumps & Water Treatment Equipments
-
-
-
Supply, installation, testing & commissioning of vertical inline multistage pumping set (Imported) with Stainless steel body, impeller, casing, shaft and C.I. base & head with mechanical seal, connected to a TEFC induction motor suitable for 415+/- 10% volts, 3 phase 50 cycles A.C. supply with 150 mm dia pressure gauge with gunmetal isolation cock, vibration eliminating pads under foundations, 80x40 mm I section base plate bolted to cement concrete foundations complete.Vendor to submit performance curves and technical catalogue of the proposed model for review and information.
-
-
-
Filter Feed Pump ( Dom. Water) at Water Supply Pump Room)
-
-
-
Set of Two Pumps ( 1 Working+ 1 Standby)
-
-
-
Capacity 1.0 LPS
-
-
-
Head 25 M.
-
-
-
HP 1.0 HP Approxi.
1
-
-
Domestic Water Transfer Pump at Water Supply Pump Room.
-
-
-
Set of Two Pumps ( 1 Working+ 1 Standby)
-
-
-
Capacity 1.0 LPS
-
-
-
Head 60 M.
-
-
-
HP 1.5 HP Approxi.
1
-
-
Flushing Water Transfer Pump
-
-
-
Set of Two Pumps ( 1 Working+ 1 Standby)
-
-
-
Capacity 1.0 LPS
-
-
-
Head 60 M.
-
-
-
HP 1.5 HP Approxi.
1
-
-
Supply, installing, testing and commissioning of submersible open impeller non-clog pumps with C.I.body and to TEFC submersible motor for 415 + 10% volts, 3 phase, 50 cycles A.C. power supply with mechanical seal, pump connector unit with rubber diaphragm and bend, vertical discharge pipe, guide pipe and chain in built level controller, sequence running controller, arrangement for both pumps together inacase of emenegency, audible hooter for failure or flooding, dry running Protection complete in all respects., painting, testing and commissioning complete with approved quality and make as required as per instruction of site incharge.
-
-
-
(Pumps shall be installed in a set of two pumps One working and One standby)
-
-
-
Basement Pump Room Drainage Sump Pumps
-
-
-
(Pumps to be suitable to handle solids upto 12 mm size)
-
-
-
Capacity - 4.0 LPS (Each)
-
-
-
Head - 15 M
-
-
-
H.P. - 1.5 HP Approx.
3
-
-
Sewage Sump Pumps
-
-
-
(Pumps to be suitable to handle solids upto 40 mm size)
-
-
-
Capacity - 4.0 LPS (Each)
-
-
-
Head - 15 M
-
-
-
H.P. - 2.0 HP Approx.
1
-
-
Supply Installation,Testing & Commissioning of vertical self supporting Filter of FRP Vessel, pressure gauges, sample cock, uPVC ASTM Pressure Pipes of Sch-80 face piping, with multiport valve and all accessories , with initial charge of filter media including sand, anthracite and corbon etc. testing and commissioning complete.
-
-
-
Dual Media Filter For Domestic Water Supply.
-
-
-
Capacity- 3600 LPH
-
-
-
Filtration rate- 14000 LPH/Sqm.
-
-
-
Filter dia approx. - 600 MM
-
-
-
Working pressure: 3.0 Kg/sq cm.
-
-
-
Test pressure : 4. 5 Kg/sq cm
1
-
-
Activated Carbon Filter For Domestic Water Supply.
-
-
-
Capacity- 3600 LPH
-
-
-
Filtration rate- 14000 LPH/Sqm.
-
-
-
Filter dia approx. - 600 MM
-
-
-
Working pressure: 3.0 Kg/sq cm.
-
-
-
Test pressure : 4. 5 Kg/sq cm
1
-
-
Supply Installation,Testing & Commissioning of metering pump type chemical doser with 100 lits. HDPE chemical grade solution tank,injection fitting assembly,suction and delivery hose upto the point of injection, capacity 0-6 lph, complete in all respects.
-
-
-
Chlorination of Domestic Water
1
-
-
Design, manufacture, supplying, fixing in position, testing and commissioning of the following front operated cubicle type, front access 2mm thick mild steel sheet, free standing, dust and vermin proof, switchboard with IP42 protection with hinged and lockable doors complete with interconnections, tinned copper crimping lugs, bonding to earth and painting, suitable for use at 415 volts, 3 phase 4 wire 50 Hz system and suitable for a fault level of 25 MVA symmetrical at 415 volts.
-
-
-
All switchboards shall have provision for entry of cables from the top or bottom as required.
-
-
-
All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The busbars insulation shall be with heat shrinkable sleeves. SMC/DMC shrouds and busbar supports shall be used. Padlocking facility shall be provided on all outgoing feeders doors and switch handles shall be lockable in OFF position.
-
-
-
Electric Panel For Water Supply Pumps at Water Supply Pump Room
-
-
-
INCOMING
-
-
-
1 No. 100 amps TPN MCCB with the following accessories:
-
-
-
1 No. square flush mounting 0-500 volts scaled voltmeter with three way and OFF switch.
-
-
-
Three phase indicating lights.
-
-
-
Electrolytic high conductivity three phase and neutral tinned copper bus bar rated at 150 amps having a current density of 1 amp per Sqmm suitable to with stand symmetrical fault level of 25 MVA at 415 volts. The neutral bus bar is to be of 100% capacity.
-
-
-
OUTGOING UNITS
-
-
-
Eight 25 Amp. TP + NL M.C.C.B. with rotary handle of breaking capacity 25KA
-
-
-
8 Nos. fully automatic DOL starters with push buttons and ON/OFF indicating lights and overload relays for 1.5 to 5.0 HP pump .
-
-
-
8 Nos. rotary selector switch for selecting mode of operation i.e. auto/manual/off.
-
-
-
8 Nos.cyclic relay for automatic duty changeover of pumps.
-
-
-
8 No. single phase preventors.
-
-
-
8 Nos. square flush mounting 0-30 amps scaled ammeters with three way and OFF selector switch.
-
-
-
Space for 4 Nos. Level Controllers.
-
-
-
Switchgear shall be suitable for the HPS of various motors.
-
-
-
4 Nos. 32 Amp. TPN MCB Spare.
-
-
-
The motor control panel shall be prewired with colour coded wires with identification labels complete in all respects as required.
1
-
-
Electric Panel For Drainage Sump Pump
-
-
-
One incoming main MCCB unit of 63 amps rating.
-
-
-
Copper bus bar is separate chamber fully taped of 100 amps capacity.
-
-
-
Two MCB units of 25 amps
-
-
-
Two fully automatic DOL starters with push buttons and on/off indicating lights.
-
-
-
One rotary duty selector switch
-
-
-
Two manual/auto/off switches.
-
-
-
Two single phasing presenters.
-
-
-
One panel type voltmeter with rotary selector switch for reading voltage between phases.
-
-
-
Two ampere meters one for each motor.
-
-
-
Three neon phase indicating lights on the incoming mains.
-
-
-
Space for one liquid level controllers.
-
-
-
All internal wiring colour coded from incoming mains to various switchgear, starters, meters, indicating lamps and bus bar with a changeover facility to run each pump alternatively with an alarm bell in case of both pump’s running at one time. Switchegear offered must be compatible with the HP of the motors offered.
-
-
-
Motor control centre as described above
3
-
-
Supplying, installing, testing and commissioning controllers with low voltage relays, stainless steel probes and PVC shroud wiring from tank top to problems of required.
-
-
-
For Water Supply Pump:
-
-
-
To start pump when water level is low in Domestic Water U.G. tank and shut off pump when Domestic Water U.G. tank is full. Also to stop when water level is low in raw water underground tank.
3
-
-
For Sump Pumps:
-
-
-
To start pump when water level is high in sump and shut off pump when sump is empty. Both pumps are start when sump is over flowing.
4
-
-
Providing, laying, testing & commissioning of 'B' class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :
-
-
-
40 mm dia
30
-
-
50 mm dia
30
-
-
65 mm dia
30
-
-
80 mm dia
25
-
-
100 mm dia
20
-
-
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :
-
-
-
40 mm dia
6
-
-
50 mm dia
6
-
-
65 mm dia
8
-
-
80 mm dia
2
-
-
100 mm dia
2
-
-
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS:5312 complete with rubber gasket, GI bolts, nuts,washers etc.as required :
-
-
-
40 mm dia
6
-
-
50 mm dia
2
-
-
65 mm dia
8
-
-
80 mm dia
2
-
-
Providing and fixing resilient rubber neoprene lined style arch vibration eliminators suitable for raw water upto 45 deg.C. Temperature working pressure upto 25 Kg/Sqcm.
-
-
-
40 mm dia
6
-
-
50 mm dia
6
-
-
65 mm dia
8
-
-
Providing and fixing heavy duty armoured cables 1.1 KVA grade including necessary support clamps at ceiling level and connection lugs complete in all respects.
-
-
-
Power cable Copper 3 core 6 sq.mm
60
-
-
Power cable Copper 3 core 4 sq.mm
150
-
-
Control cable copper 2 core 1.5 sq.mm
400
-
-
Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.
-
-
-
100 mm dia
4
-
-
Sewage Treatment Plant (MBR Technology )
-
-
-
Design, Supplying, installing, testing & commissioning of fully automatic Sewage Treatment Plant of 25 KLD & 65 KLD Effluent Treatment Plant for the following duty:
-
-
-
Nature of effluent - Domestic Sewage from toilet, kitchen waste water, domestic Laundry waste (if any) shall be discharged into the STP. Design to take consideration of same.
-
-
-
INLET EFFLUENT CHARACTERSTICS
-
-
-
pH - 6.5 – 8.5
-
-
-
BOD - 500 Mg/L
-
-
-
S. Solids - 250 Mg/L
-
-
-
COD - 750 Mg/L
-
-
-
Oil & Grease - 50 Mg / L (after oil and grease trap)
-
-
-
DISCHARGE EFFLUENT CHARACTERSTICS AFTER TREATMENT
-
-
-
pH - 6.0 – 8.0
-
-
-
BOD - Less than 5 Mg/L
-
-
-
S. Solids - Less than 50 Mg/L
-
-
-
COD - Less than 20 Mg/L
-
-
-
Oil & Grease - below detectable level
-
-
-
Turbidity - Less than 1 NTU
-
-
-
E coli Removal - below detectable level
-
-
-
STP Cap 25 KLD Electical & Mechanical Works
-
-
-
Note:- All Tanks required for STP shall be Fabricated from MS Sheet of required thickness, including inside Coating FRP and outside synthetic enamel paint over a coat of steel primer.
-
-
-
Design, supplying, installing, testing & commissioning of 25 KLD Sewage Treatment Plant for Domestic Waste/Kitchen (excluding all Civil & construction work) for the following duty:-
-
-
-
Supply, installation, testing & commissioning of 2 Nos. Stainless Steel-316 Perforated Corrugated Screen of size 1000mm x 1000mm fabricated through 5mm thick plate having holes of 8 mm at a distance of 10 mm with suitable lifting arrangement. This is to slide in the fixed ss channels fixed on the side walls. Set-1
-
-
-
Supply and installation of MS Class 'C' with hot dip galvanized puddle flange 25 mm to 200 mm dia. in accordance to relevant IS pipe standards as required to be provided (in the structural slab & wall) of various diameter. Puddle flanges shall be provided for all the structural component of the STP/ETP. Lot-1
-
-
-
Supply and fixing of mechanical punched hole fine screen for 2-3 mm size complete as required MOC- SS 304. Set-1
-
-
-
Supply and fixing of meachenical belt type oil skimmer basin MS housing with 500 liter HDPE tank for 1/2 Lph flow rate capacity complete in all respect. Set-1
-
-
-
Supply and fixing of electronic type level indicator and controller for automatic operation of the system with high/low level alarm complete with auxillary NO/NC contacts for each tank.Lot-1
-
-
-
Supply and fixing of sight tube (of 3.5 to 4.5 m length) with isolation valve at top/bottom, demarcation on tube & for making the installation complete. Lot1
-
-
-
Supplying and fixing of fully submersible, centrifugal non-clog sewage handling type pump for raw sewage transfer from equalization tank to Anoxic Tanks. The pump shall have CI casing, CI impeller and SS shaft, TEFC induction motor suitable for 415+10%Volt, 3 Phase, 50 Cycles AC Power supply, Mechanical seal, Pump connector unit with rubber diaphragm and bend including pressure gauge, lifting arrangement/lifting device of pull chain/guide rail for the pump, sequence running controller, dry running protection, level controller complete with probs complete in all respect including delivery header & delivery pipe (interconnecting piping) with GI 'C' class pipe of required dia, isolation valves, NRV & vibration eliminators on delivery side of Pumps.
-
-
-
Equlisation Transfer Pump - Set-1
-
-
-
Capacity/Flow rate - 1.5 m3/h
-
-
-
Pumping Head - 8-10 Mtr
-
-
-
Solid Handling: 15-20 mm
-
-
-
Set of 2 Nos. Pumps (1 Working +1 Standby)
-
-
-
Aeration System
-
-
-
Air diffusion system shall include the following:
-
-
-
Supply and fixing of 2 No. twin type rotary air blowers (2W + 1S) capable of delivering 25 cum/hr of free air at 0.5 kg/cm2 for Aeration Tank and Equlisation tank. driven through “V” belt or directly coupled through flexible coupling to a TEFCmotor of suitable HP Suitable for 415 ± 10% volts, 3 phase, 50 cycles A/C supply.1225 RPM with all accessories complete in all respects. Set-1
-
-
-
Supply and fixing of 2 No. twin type rotary air blowers (1W + 1S) capable of delivering 25 cum/hr of free air at 0.5 kg/cm2 for TW membrane scouring system. driven through “V” belt or directly coupled through flexible coupling to a TEFCmotor of suitable HP Suitable for 415 ± 10% volts, 3 phase, 50 cycles A/C supply.1300 RPM with all accessories complete in all respects. Set-1
-
-
-
Supply and fixing Disc type, EPDM membrane based, non clog type air dispersion system capable of handling 3-5 cfm of air with oxygen transfer efficiency of 3-4% per/meter water depth. Air dispersion grid shall be assembled in modular form so that they can be replaced / repaired easily from plat form at the top. (Imported fine bubble membrane diffusers for equalisation tank, aeration tank & sludge holding tank) Lot-1
-
-
-
Supply and fixing Tube type, silicon membrane based, non clog type air dispersion system capable of handling 3-5 cfm of air with oxygen transfer efficiency of 3-4% per/meter water depth. Air dispersion grid shall be assembled in modular form so that they can be replaced / repaired easily from plat form at the top. (Imported fine bubble membrane diffusers for MBR tank) Lot-1
-
-
-
Note : Air dispersion system shall be provided for Equalisation tank, Aeration tank, MBR tank and Sludge holding tank.
-
-
-
Providing, Laying, testing & Commissioning of "C" Calss Heavy duty MS Pipe 40 mm to 150 mm dia. conforming to IS:3589 & 1239 including fittings like elbows, tees, flanges, nut bolts, gaskets with suitabke clamps & painting with Two or more coats of synthetic enamel paint of required shade over a coat of steel primer complete as required. For Interconnecting Lines and Air Lines. ( Lot-1)
-
-
-
Providing, Laying, testing & Commissioning of stainless steel grade-304 schedule-10 50 mm to 100 mm dia including fittings like elbows, tees, flanges, nut bolts, gaskets with suitabke clamps. Lot-1
-
-
-
Providing & fixing CI butterfly valve 50 to 150 mm dia tested to a pressure not less than 15 Kg/Sq.cm. Including rubber gasket, 2 nos. table-E flanges, nuts, bolts, washers & painting complete as required. Lot-1
-
-
-
Providing & fixing dual plate CI wafer type check valve 50 mm to 150 mm dia. tested to a pressure of 10 Kg/sqcm. Including rubber gasket, 2 nos. table-E flanges, union, nuts, bolts, washers & painting complete as required. Lot-1
-
-
-
Supply, installation, testing & commissioning of MBR modules of hollow fibre reinforced filteration membranes with SS – 316 skid for housing the membrains & air grid for sccouring the sludge, permeate S.S piping etc. complete in all respect as required.
-
-
-
Membrane Tank - Membrane Accessories, Valve, Instrument, Permeate Collection and air distribution header piping etc. Back pulse tank of FRP, Permeate cum backpluse pump with VFD : CI 1w+1s capacity : 10 m3/hr , Membrane blower without acoustic hood MOC : CI 1w +1S capacity : 500 Nm3/hr, Type : Twin lobe type, Chemical dosing system : 1W, * Membrane shall have max pore size of 0.04 micron. Membrane shall have 2 year full replacement cliff warrenty. Set-1
-
-
-
Supply and fixing of ultravoilet dis-infection unit of 2 cum/hr. capacity. The unit shall have over 99.9 % bacterial reduction from inlet to outlet. The dis-infection chamber shall be constructed of SS 316L on all welted parts. The UV lamp shall be of low pressure mercury vapour type with hard glass enclosure, the sockets shall be water tight & vibration resistant. The lamp life shall be rated for 6000 hours. The unit shall be complete with temperature safety control, lamp out alert circuit & UV radiometer with 4 – 20 mA output as of manufacturers recomendation in all respects.
-
-
-
The UV unit shall have with reactor, cabinet housing, cabinet cooling, treatment chamber, electrical panel, temperature safety control, lampout alert, UV radiometer along with UV monitoring system and UV monitoring readout panel. The UV Dosage should be 60,000 uW – Sec / sq.cm. The lamps should be selected based upon the flow requirement of respective unit. as recomended by manufacturer complete in all respects. 1 No.
-
-
-
Flow Rate :2 M3/hr
-
-
-
Supply and fixing of horizontal, centrifugal Sludge disposal pump for the disposal of sludge from tube settler to sludge holding tank. The pumps shall have CI casing, CI/bronze Impeller & SS shaft & sleeve with mechanical rotary shaft seal connected by a flexible tier type coupling to TEFC induction motor suitable for 415+10% Volts, 3 Phase, 50Hz, AC Power Supply mounted on a common channel base-plate with coupling guard, 150 mm dia pressure gauge with GM isolation cock, suitable vibration eliminator pads under foundation of approved design, dry running protection including all necessary piping, valves, level controller complete with probs and other accessories complete as required.
-
-
-
Sludge Recycling Pump ( Set-1)
-
-
-
Capacity/Flow rate - 1.5 M3/h
-
-
-
Pumping Head - 8-10 Mtr
-
-
-
(Solid handling size for this pump shal be 7-10 mm)
-
-
-
Set of 2 Nos. Pumps (1 Working +1 Standby)
-
-
-
Supply and fixing of Screw/Solid bowl type centrifuge with top discharge of suitable for 3 batches in a day with interconnecting piping, lifting arrangement, pump and poly dosing system. The basket shall be in SS 304 construction complete in all respects. Set-1
-
-
-
Supply and fixing of Cetrifuge Feed pump of suitable capacity with CI body, SS-Impeller and Shift complete(Screw Type) - 2 Nos. (1working+1standby) Set-1
-
-
-
Supply and fixing of following instrument for the auto operation of System and saftey of MBR modules.
-
-
-
Electro-magnetic flow meter cum totalizer at the sewage inlet and outlet of membrane suction pump of suitable size. 2 Nos.
-
-
-
pH Meter at membrane suction pump outlet for measurement of pH. 1 No.
-
-
-
Diffrential pressure switch transmittor and for pressure alarm high and low, flow switch for flow alarm high and low. Set-1
-
-
-
Online rotameter for checking the air flow to the MBR module. Set-1
-
-
-
Air Rotameter for Biological Air supply and Air scouring. Set-1
-
-
-
STP as Describe above
1
-
-
ELECTRICAL WORKS FOR STP
-
-
-
Supply and fixing of the following front operated cubicle type compartmentalition, front access totally enclosed sheet steel clad, free standing, dust and vermin proof, switchboards with IP 42 protection with hinged, gasketed and lockable doors including interconnections, copper crimping lugs, brass glands, bonding to earth and painting, suitable for use at 415 volts, 3 phase 4 wire 50 Hertz system, and with 25 kA rupturing capacity at 415 volts complete as per specifications, as required and as below.
-
-
-
All switchboards shall have provision for entry of cables from the top or bottom as required.
-
-
-
All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The busbars insulation shall be with heat shrinkable sleeves. SMC/DMC shrouds and busbar supports shall be used. Padlocking facility shall be provided on all outgoing feeders doors and switch handles shall be locakble in OFF position.
-
-
-
This panel include Incommer, Bus bar, outgoing switch gears, indicating lamps, motor starters, and other requirement to properly operation of STP.
1
-
-
Fire Fighting System
-
-
-
Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required :
-
-
-
Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520.
-
-
-
Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.
-
-
-
M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.
-
-
-
Suitable cement concrete foundation duly plastered with anti vibration pads.
-
-
-
2280 LPM at 88 m Head
2
-
-
1620 LPM at 56 m Head
1
-
-
Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump)
-
-
-
Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520.
-
-
-
Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts
electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required.
-
-
-
M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.
-
-
-
Suitable cement concrete foundation duly plastered with anti vibration pads.
-
-
-
2280 LPM at 88 m Head
1
-
-
Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump)
-
-
-
Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520.
-
-
-
Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.
-
-
-
M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.
-
-
-
Suitable cement concrete foundation duly plastered with anti vibration pads.
-
-
-
180 LPM at 88 m Head
2
-
-
Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD pecification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required :
-
-
-
Incomings
-
-
-
630A, 50kA 4 Pole MCCB, Ics=100% Icu Rating Digital Voltmeter 0-500V with selector switch Ammeter (0-800 A) with selector swtich & CTs etc. LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 800Amps
-
-
-
Outgoings
-
-
-
( Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps)
-
-
-
Main Fire Pumps
-
-
-
250 Amp, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 100 to 125 hp pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring equired for automatic operation, selector switch for local/remote, to/manual/OFF operation. - 2 sets
-
-
-
Jockey Pump
-
-
-
125 Amp, 50kA TPN MCCB, Ics=100% Icu, with Suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. - 2 sets
-
-
-
Diesel Engine Control
-
-
-
Control for diesel engine comprising - Automatic/Manual selctor switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0-20 A DC Ammeter
-
-
-
All standard relays and accessories for automatic operation of diesel engine
System Controller
-
-
-
Designing, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification
1
-
-
Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required.
-
-
-
150 mm. Dia
20
-
-
80 mm dia.
15
-
-
100 mm dia.
20
-
-
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :
-
-
-
25 mm dia
9060
-
-
32 mm dia
895
-
-
40 mm dia
865
-
-
50 mm dia
1240
-
-
65 mm dia
950
-
-
80 mm dia
740
-
-
100 mm dia
890
-
-
150 mm dia
1195
-
-
200 mm dia (wall thickness 6.3 mm)
10
-
-
250 mm dia (wall thickness 6.3 mm)
10
-
-
Providing, laying, testing & commissioning of 'B' class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :
-
-
-
80 mm dia.
140
-
-
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :
-
-
-
Single headed Stainless steel
39
-
-
Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required :
-
-
-
Single headed Stainless steel
6
-
-
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :
-
-
-
80 mm dia
45
-
-
100 mm dia
7
-
-
150 mm dia
39
-
-
200 mm dia
1
-
-
250 mm dia
1
-
-
Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required.
40
-
-
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS:5312 complete with rubber gasket, GI bolts, nuts,washers etc.as required :
-
-
-
80 mm dia
2
-
-
100 mm dia
5
-
-
150 mm dia
2
-
-
200 mm dia
1
-
-
250 mm dia
1
-
-
Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.
-
-
-
150 mm dia
3
-
-
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :
-
-
-
Stainless Steel (Grade 304)
90
-
-
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.
-
-
-
20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585
-
-
-
20 mm nominal internal dia gun metal globe valve & nozzle.
-
-
-
Drum and brackets for fixing the equipmets on wall.
-
-
-
Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.
-
-
-
40 m
39
-
-
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for nstantaneous connection to interconnect hose pipe coupling as required :
-
-
-
Stainless Steel (Grade 304)
39
-
-
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :
-
-
-
4 way - 150 mm dia M.S. Pipe
1
-
-
Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.
6
-
-
Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories :
-
-
-
Pendent Sprinkler
50
-
-
Upright Sprinkler
2885
-
-
Horizontal side wall sprinkler
820
-
-
Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required.
6
-
-
Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required.
-
-
-
150mm dia
34
-
-
Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required :
-
-
-
150mm dia
2
-
-
Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required.
-
-
-
700mm
20
-
-
1000mm
20
-
-
Supplying, installation, testing & commissioning of deluge valve (to be used for water curtains) UL listed with wet pilot basic trim assembly for DVA with test and alarm, drip and drain valve with water motor gong complete as required.
-
-
-
150mm dia
1
-
-
Providing, installation, testing & commissioning of water curtain nozzle 15mm dia nickel chrome plated brass, BSPT, K-factor as per design consideration complete as required.
30
-
-
Providing, installation, testing & commissioning of electric release trim assembly for deluge wall with two way solelnoid valve, weather proof operation on 24 volts DC supply complete as required.
1
-
-
Providing, installation, testing & commissioning of adjustable rosette plate for 15mm dia in white finish UL Listed or FM approved complete as required.
50
-
-
Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
25 mm
175
-
-
Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.
-
-
-
150 mm width x 50mm depth x 1.6 mm thickness.
175
-
-
Providing and fixing of Weather proof hose cabinets fabricated from 14 g M.S. Sheet with full glass door and mortise locking arrangement , suitable to accommodate one Hydrant landing valve, 2 nos. 15 M long hose and 1 No branch pipe. The cabinet shall be painted with one coat of primer and finished stove enamelled "Fire Red", "Fire Hose" written on front including suitably mounted on a raised masonry platform as required. (Approx 0.75mx0.6 m x 0.25 m).
6
-
-
Providing and fixing MS partly glazed single/double hung lockable shutter fabricated from MS section as required with 5 mm thick glass for fire station complete including stove enamelled painting of door and frame and words "Fire Hydrant" written on glass, suitable to accommodate 2 Hydrant landing valves, 1 fire hose reel, 2 nos.15m long 63 mm dia hose,1-branch pipe, 1no. fire man's axe, fire extiguishers 2 nos, including suitably mounted on a raised masonry platform as required. (Approx.size 0.90 m x 2.1m )
39
-
-
Providing and fixing dial type pressure gauge with isolation cock and pipe at hydrant station. Dial diameter 100 mm caliberation, 0-15 kg
73
-
-
Providing and fixing resilient rubber neoprene lined single arch vibration eliminators with unit control suitable for raw water upto 450C temperature working pressure 25 kg and test pressure 37.5 kg/cm2.
-
-
-
80 mm dia.
2
-
-
100 mm dia
6
-
-
150 mm dia
4
-
-
Providing and fixing heavy duty PVC insulated, PVC armoured conductor cables 1100 V grade including necessary support clamps and connection lugs complete in all respects.
-
-
-
Power cable 3.5 core 95 sq mm aluminium conductor armoured cable
100
-
-
Power cable 3 core 16 sq mm aluminium conductor armoured cable.
50
-
-
Control cable copper 2 core 1.5 sq.mm
175
-
-
Supply, Installation, Testing & Commissioning of double flanged vertical air vessel fabricated shell from 10 mm thick & dished ends 12 mm thick M.S.plate, suitable for working pressure of 18 kg/cm2 and test pressure of 27 kg/cm2, 450 mm dia and 2.00 m high for fire pumps complete with four nos dual setting pressure switches to operate jockey and main pumps at drop of pressure as given in the specifications.
1
-
-
Providing & fixing 150 mm diameter MS Class ‘C’ for diesel engine exhaust pipe (including all fittings, clamps, steel support) of suitable dia for the diesel engine. The pipe shall be provided insulation with fibre glass wool and wraped with 24g. aluminium sheet complete with all respect.
50
-
-
Providing and fixing of gun metal fire Brigade Suction Hose coupling (Draw-out Connection) with nut for female coupling as per IS:902- 1974 complete with 100 mm dia. G.I. Suction pipe and 100 mm dia. 1No. C.I. Foot valve flanged (to be connected to static water tank).
1
-
-
Providing and fixing carbon-di-oxide type fire extinguishers consisting of welded M.S. cylinderical body, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket conforming to IS:15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge.
-
-
-
Capacity 4.5 Kg.
75
-
-
Providing and fixing mechanical foam type fire extingushers consisting of welded M.S. trolley mounted cylindrical body, squeeze lever discharge valve fitted with pressure discharge hose, discharge nozzle, trolley etc., ISI marked as per IS:IS:13386 finished externally with red enamel paint.
-
-
-
Capacity 50 lit (D.G.Room)
1
-
-
Providing and fixing carbon-di-oxide fire extingushers trolley mounted with all accessories internal discharge tube,high pressure discharge hose,discharge nozzle, ISI marked as per IS:2878 finished externally with red enamel paint.
-
-
-
Capacity 22.5 kg.
2
-
-
Providing and fixing ABC Powder type fire extinguishers consisting of welded M.S. cylinderical body, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket conforming to IS:15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge.
-
-
-
Capacity 6.0 Kg.
75
-
-
SUB HEAD - I : POINT WIRING & ACCESSORIES
-
-
-
WIRING IN MS CONDUIT
-
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
-
-
-
Group C
1758
-
-
Wiring for group controlled (looped) light point/ fan point/ exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
-
-
-
Group C
260
-
-
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
4500
-
-
Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 2 Nos 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
1750
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.
-
-
-
FOR LIGHTING CIRCUIT/ SUB MAIN WIRING
-
-
-
2x1.5 sq mm + 1x1.5 sq.mm earth wire
2000
-
-
2x2.5 sq mm + 1x2.5 sq.mm earth wire
1500
-
-
2x6 sq mm + 1x6 sq.mm earth wire
1200
-
-
4 X 6 sq.mm + 2 X 6 sq.mm earth wire
1000
-
-
4 X 10 sq.mm + 2 X 6 sq.mm earth wire
800
-
-
4 X 16 sq. mm + 2 X 6 sq. mm earth wire
500
-
-
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.
-
-
-
3 x 1.5 sq. mm
500
-
-
6 x 1.5 sq. mm
300
-
-
9 x 1.5 sq. mm
200
-
-
Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
25 mm dia
1000
-
-
32 mm dia
800
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required.
70
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
100
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 Nos 3 pin 5/6 modular socket outlet and 2 nos 5/6A amps modular switch, connection etc. as required. (For Light plugs to be used in non residential buildings)
30
-
-
SUB HEAD - II : MV DISTRIBUTION BOARDS
-
-
-
MCB DISTRIBUTION BOARDS
-
-
-
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
6 way (4 + 18), Double door
10
-
-
8 way (4 + 24), Double door
16
-
-
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
12 way (4 + 36), Double door
16
-
-
Supplying and finishing 5 amps to 32 amps rating, 240 volts 'C' series, miniature circuit breaker suitable for inductive and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
Single pole
80
-
-
Triple pole
10
-
-
Supplying and fixing following rating, four pole, 415 V, isolator the existing MCB DB complete with connections, testing and in commissioning etc. as required.
-
-
-
63 A
10
-
-
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
40 A
15
-
-
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
15
-
-
Supplying and fixing Cable End Box (Loose Wire Box)(IP 43) suitable for following triple pole and neutral, sheet steel,MCB distribution board, 415 V, on surface/recess, complete with testing and commissioning etc. as required.
-
-
-
For 8 way, Double door TPN MCBDB
5
-
-
Supplying and fixing following rating, 'C' series, four pole, 415 volts, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
40 amps
5
-
-
SUB HEAD - III : CABLES & CABLE TRAYS
-
-
-
Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 kV grade of following size in the HUME pipe as required.
-
-
-
Upto 35 sq. mm
0.1
-
-
Above 185 sq. mm and upto 400 sq.mm
210
-
-
Laying and fixing of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size on cable tray as required.
-
-
-
Upto 35 sq. mm (clamped with 1mm thick saddle)
3320
-
-
Above 35 sq. mm and up to 95 sq.mm (clamped with 25x3 mm MS Flat clamp)
1110
-
-
Supply, loading, transportation unloading at site, storages at site, shifting from storage place to site of following sizes of XLPE insulated PVC sheathed, FRLS, Aluminium conductor armoured power cable of 1.1 KV grade conforming to IS amended upto date and as per specifications.
-
-
-
3½ C x 300 Sqmm
500
-
-
3½ C X 240 sq.mm
400
-
-
3½ C X 50 sq.mm
500
-
-
3½ C X 35 sq.mm
800
-
-
4 X 25 sq.mm
600
-
-
4 X 16 sq. mm
1000
-
-
4 X 10 sq. mm
1000
-
-
3 X 6 sq. mm
1200
-
-
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1 kV grade as required.
-
-
-
3½ X 300 sq. mm (70 mm)
16
-
-
3½ X 240 sq. mm (62 mm)
10
-
-
3½ X 50 sq. mm (35 mm)
10
-
-
3½ X 35 sq. mm (32 mm)
16
-
-
4 X 25 sq. mm (28 mm)
20
-
-
4 X 16 sq. mm (28 mm)
50
-
-
4 X 10 sq. mm (25 mm)
50
-
-
3 X 6 sq. mm (22 mm)
50
-
-
Supply and installing following size of perforated Hot Dipped Galvanised Iron cable tray (galvanisation thickness not less than 50 microns) with perforation not more than 17.5 %, in convenient sections, joined with connectors, suspended from the existing bracket including G.I. bolts & nuts, etc. as required.
-
-
-
150 mm width x 50 mm depth x 1.6 mm thickness
200
-
-
300 mm width X 50 mm depth X 1.6 mm thickness
2100
-
-
450 mm width X 50 mm depth X 2.0 mm thickness
120
-
-
600 mm width X 50 mm depth X 2.0 mm thickness
1400
-
-
900 mm width X 62.5 mm depth X 2.0 mm thickness
100
-
-
Supply and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation thickness not less than 50 microns) with perforation not more than 17.5 %, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
150 mm width x 50 mm depth x 1.6 mm thickness
2
-
-
300 mm width X 50 mm depth X 1.6 mm thickness
21
-
-
450 mm width X 50 mm depth X 2.0 mm thickness
17
-
-
600 mm width X 50 mm depth X 2.0 mm thickness
2
-
-
900 mm width X 62.5 mm depth X 2.0 mm thickness
2
-
-
Supply and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Tee" (galvanisation thickness not less than 50 microns) with perforation not more than 17.5 %, in convenient sections, joined with connectors, suspended from the suspended from the existing bracket including G.I. bolts & nuts, etc. as required.
-
-
-
150 mm width x 50 mm depth x 1.6 mm thickness
10
-
-
300 mm width X 50 mm depth X 1.6 mm thickness
20
-
-
450 mm width X 50 mm depth X 2.0 mm thickness
9
-
-
600 mm width X 50 mm depth X 2.0 mm thickness
5
-
-
Supply and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Reducer" (galvanisation thickness not less than 50 microns) with perforation not more than 17.5 %, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
450 mm width X 50 mm depth X 2.0 mm thickness
4
-
-
SUB HEAD - IV : MV PANELS
-
-
-
Design, manufacture, supply, installation, testing and commissioning of following Utility panels suitable for 415 V, 3 phase, 4 wire, 50 Hz power distribution system. The panel shall be Indoor, free standing, floor mounting, sheet metal clad, cubicle, dead front, dust and vermin proof type compartmentalised design fabricated out of 2mm thick CRCA sheet steel for Load bearing members and 1.6 mm thick for non-load bearing members, complete with colour coded, heat shrinkable PVC insulated, aluminium bus bars and separate earth bus bar of adequate cross section through out the length of the panel. The incoming and outgoing feeders shall be accommodated in a fully segregated, modular multitier arrangement with adequate size and distinct cable alley, bus bar alley/chamber (form-3b Construction). The panel shall be complete with name plate, earthing, numbering, danger plate etc. as required and as per specifications and drawings. The panel shall withstand the fault level of as indicated elsewhere or shown in Single Line Diagrams.
-
-
-
Important Notes: Common for all Switchboard:
-
-
-
The BOQ shall be read inconjunction with general notes, specification and Single Line Diagram (attached for Ref.). Incase of any discrepancy between specification, BOQ and SLD, the same shall be brought to the notice of Client/Consultant before quoting the rates, otherwise stringent condition shall be deemed to have been considered.
-
-
-
Fault current wherever mentioned shall be Ics value. (Ics = 100% Icu).
-
-
-
All MCCB shall be provided with door interlocked rotary handle with ON/TRIP/OFF position indicator, continious variable thermal magnetic O/C and S/C releases. The MCCB above 250A rating shall be provided with microprocessor based releases.
-
-
-
Incoming MCCBs shall be provided with O/C, selective S/C, Instentaneous short circuit protection releases.
-
-
-
Outgoing MCCBs shall be provided with O/C, and selective short circuit protection.
-
-
-
All feeder doors shall have pad locking arrangement.
-
-
-
All TP feeders shall have solid isolable neutral link.
-
-
-
All MCCB used in starter feeder shall be suitable for motor duty application.
-
-
-
All power contactors including NIC shall be of AC3 duty.
-
-
-
Panel shall be powder coated of approved shade with minimum 60 micron thickness.
-
-
-
Size of Voltmeter/ Ammeter for incomer also, 96mm x 96mm flush mounted with shrouded terminal shall be used in the panel.
-
-
-
Bus bar chamber shall be kept at top of the all panels.
-
-
-
All bus bar shall be insulated with coloured PVC Sleeve i.e.RYB, BK as per colour code.
-
-
-
Internal wiring of panel shall be with size 2.5sqmm Flexible Copper Conductor for CT circuit and control wiring with 1.5 sqmm.
-
-
-
All indicating light shall be LED type .
-
-
-
Each vertical section of floor mounted panel shall have independent base frame (75mm x 40mm) size made out of 3 mm sheet steel (LT Panel & DG Panel).
-
-
-
All the makes shall be as per approved make list only.
-
-
-
Wherever only voltmeter & ammeter are required, the same may be provided in combined meter suitable for both parameter.
-
-
-
Space heater shall be provided in each cable alley.
-
-
-
All links/drops for ACB/MCCB shall be designed for full rated current of ACB/MCCB rating at same current density of Main Bus Bar.
-
-
-
All switchgear used in starter feeder shall be type-2 co-ordinated. Vendor is required to submit manufacturer's type-2 co-ordination chart for the make used.
-
-
-
Arch flase Protection shall be in Cable allay & busbar Chember.
-
-
-
Fault rating of RCCB shall be equal to the fault rating of MCBs.
-
-
-
Necessary Co-ordination shall be done by the Panel Manufacturer/ Vendor with the vendor of "Gas flooding system" for fire protection, for making suitable provisions in the panels, at the Design stage, Manufacturing stage, stage of testing at works & stage of commissioning at site.
-
-
-
Main LT Panel:-
-
-
-
Location : Basement
-
-
-
Incomer : (Three)
-
-
-
Three (3) Nos. 1250A 4P EDO ACB (50KA)
-
-
-
Incomer shall be provided with the following: (for each)
-
-
-
One (1) No. digital multifunction meter for measurement of voltage and currents with selector push buttons and one set of CT's of ratio 1200/5A, CL-1.0, 15VA (ELF-3259 of Conzerv or equivalent).
-
-
-
3 Nos. phase indication lamps and 3 Nos. status indication lamps for ON/OFF/ Trip with control SP MCB.
-
-
-
Busbar :
-
-
-
1600A TPN Al. Busbar of short circuit withstand capacity of 50kA. Busbar shall be insulated with heat shrinkable sleeves and shall be color coded.
-
-
-
Bus Coupler (2 No.) :
-
-
-
Two (2) No. 1600 Amp 4P EDO ACB, 50KA (Mechanically & Electrically inerlocking with transformer and Bus-bar)
-
-
-
Outgoing :
-
-
-
Four (4) Nos. 630A, 4P, MCCB (36KA) with LSIG Protection
-
-
-
Four (2) Nos. 400A, 4P, MCCB (36KA) with LSIG Protection
-
-
-
Four (2) Nos. 315A, 4P, MCCB (36KA) with LSIG Protection
-
-
-
Four (4) Nos. 250A, 4P, MCCB (36KA) with LSIG Protection
-
-
-
Two (2) Nos. 200A, 4P, MCCB (36KA) with LSIG Protection
-
-
-
Two (2) Nos. 160A, 4P, MCCB (36KA) with LSIG Protection
-
-
-
Two (2) Nos. 125A, 4P, MCCB (36KA) with LSIG Protection
-
-
-
Two (2) Nos. 100A, 4P, MCCB (36KA) with LSIG Protection
-
-
-
Main LT Panel as described above.
1
-
-
Sub Panel (MDB) Commercial:-
-
-
-
Location :
-
-
-
Incomer :
-
-
-
One (1) No. 250A 4P MCCB (36KA) with LSIG Protection
-
-
-
Incomer shall be provided with the following:
-
-
-
One (1) No. digital multifunction meter for measurement of voltage and currents with selector push buttons and one set of CT's of ratio 250A /5A, CL-1.0, 15 VA (ELF-3259 of Conzerv or equivalent).
-
-
-
3 Nos. phase indication lamps and 3 Nos. status indication lamps for ON/OFF/ Trip with control SP MCB.
-
-
-
Busbar :
-
-
-
300A TPN Al. Busbar of short circuit withstand capacity of 36kA. Busbar shall be insulated with heat shrinkable sleeves and shall be color coded.
-
-
-
Outgoing :
-
-
-
Ten (10) No. 63A, 4P, MCCB (25KA)
-
-
-
Sub panel (MDB - Basement) as described above.
1
-
-
Lift Panel (Commercial + Parking):-
-
-
-
Incomer (Two)
-
-
-
1 No. 100A 4P MCCB (25 KA)
-
-
-
One (1) No. digital multifunction meter for measurement of voltage and currents with selector push buttons and one set of CT's of ratio 100A/5A, CL 1.0, 15VA.
-
-
-
3 Nos. phase indication lamps and 3 Nos. status indication lamps for ON/OFF/ Trip with control SP MCB.
-
-
-
Bus Coupler :
-
-
-
One (1) No. 100A, 4P MCCB, 25KA Bus Coupler
-
-
-
Busbar :
-
-
-
150A TPN Al. Busbar shall be insulated with heat shrinkable sleeves and shall be color coded.
-
-
-
Outgoing :
-
-
-
All outgoing feeders shall be of 25kA breaking capacity and shall be provided with ON/OFF/ Trip indication lamps with back up SP MCB.
-
-
-
6 Nos. 40A 4P RCBO (100mA)
-
-
-
1 Nos. 24 hr. photo chromatic time switch with contactor
-
-
-
Lift Panel as described above.
1
-
-
Stack Parking panel (Parking Area) :-
-
-
-
Location : Basement
-
-
-
Incomer :
-
-
-
One (1) No. 630A 4P MCCB (36KA)
-
-
-
Incomer shall be provided with the following:
-
-
-
One (1) No. digital multifunction meter for measurement of voltage and currents with selector push buttons and one set of CT's of ratio 630A /5A, CL-1.0, 15VA (ELF-3259 of Conzerv or equivalent).
-
-
-
3 Nos. phase indication lamps and 3 Nos. status indication lamps for ON/OFF/ Trip with control SP MCB.
-
-
-
Busbar :
-
-
-
800A TPN Al. Busbar of short circuit withstand capacity of 25kA. Busbar shall be insulated with heat shrinkable sleeves and shall be color coded.
-
-
-
Outgoing :
-
-
-
Six (6) Nos. 100A, TPN, MCCB (25KA)
-
-
-
Four (4) Nos. 100A, TPN, MCCB (25KA)
-
-
-
Stack Parking panel (Parking Area) as described above.
1
-
-
EV Charging panel (Parking Area) :-
-
-
-
Location : Basement
-
-
-
Incomer :
-
-
-
One (1) No. 400A 4P MCCB (36KA)
-
-
-
Incomer shall be provided with the following:
-
-
-
One (1) No. digital multifunction meter for measurement of voltage and currents with selector push buttons and one set of CT's of ratio 400A /5A, CL-1.0, 15VA (ELF-3259 of Conzerv or equivalent).
-
-
-
3 Nos. phase indication lamps and 3 Nos. status indication lamps for ON/OFF/ Trip with control SP MCB.
-
-
-
Busbar :
-
-
-
450A TPN Al. Busbar of short circuit withstand capacity of 25kA. Busbar shall be insulated with heat shrinkable sleeves and shall be color coded.
-
-
-
Outgoing :
-
-
-
Eight (8) Nos. 125A, TPN, MCCB (25KA)
-
-
-
Four (4) Nos. 100A, TPN, MCCB (25KA)
-
-
-
EV Charging panel (Parking Area) as described above.
1
-
-
HVAC panel:-
-
-
-
Location : Basement
-
-
-
Incomer :
-
-
-
One (1) No. 400A 4P MCCB (36KA)
-
-
-
Incomer shall be provided with the following:
-
-
-
One (1) No. digital multifunction meter for measurement of voltage and currents with selector push buttons and one set of CT's of ratio 400A /5A, CL-1.0, 15VA (ELF-3259 of Conzerv or equivalent).
-
-
-
3 Nos. phase indication lamps and 3 Nos. status indication lamps for ON/OFF/ Trip with control SP MCB.
-
-
-
Busbar :
-
-
-
450A TPN Al. Busbar of short circuit withstand capacity of 25kA. Busbar shall be insulated with heat shrinkable sleeves and shall be color coded.
-
-
-
Outgoing :
-
-
-
Two (2) Nos. 200A, 4P, MCCB (36KA)
-
-
-
Two (2) Nos. 160A, 4P, MCCB (36KA)
-
-
-
Two (2) Nos. 125A, 4P, MCCB (36KA)
-
-
-
Two (2) Nos. 100A, 4P, MCCB (36KA)
-
-
-
HVAC panel as described above.
1
-
-
Stack Parking panel (Commercial Area) :-
-
-
-
Location : Basement
-
-
-
Incomer :
-
-
-
One (1) No. 200A 4P MCCB (36KA)
-
-
-
Incomer shall be provided with the following:
-
-
-
One (1) No. digital multifunction meter for measurement of voltage and currents with selector push buttons and one set of CT's of ratio 200A /5A, CL-1.0, 15VA (ELF-3259 of Conzerv or equivalent).
-
-
-
3 Nos. phase indication lamps and 3 Nos. status indication lamps for ON/OFF/ Trip with control SP MCB.
-
-
-
Busbar :
-
-
-
250A TPN Al. Busbar of short circuit withstand capacity of 25kA. Busbar shall be insulated with heat shrinkable sleeves and shall be color coded.
-
-
-
Outgoing :
-
-
-
Ten (10) Nos. 100A, TPN, MCCB (25KA)
-
-
-
Stack Parking panel (Commercial Area) as described above.
1
-
-
Capacitor Panels 235 kVAR (To be integrated with Main LT Panel)
-
-
-
Incoming :
-
-
-
One (1) No. 630A, 36KA, TPN, MDO, ACB, incomer with 12 step APFC relay with Auto/Manual selector switch, timer, aux. Contactor, louvers, Exhaust fan etc. (630A, 36KA, TPN, MDO, ACB) is already included in Main LT Panel as O/G to Capacitor Panel. Hence, not to be included here).
-
-
-
Metering, Indication and Protection :
-
-
-
One (1) No. digital multifunction meter for measurement of voltage and currents with selector push buttons and one set of CTs of ratio 600A/5A, CL 1.0, 15 VA.
-
-
-
One (1) set of RYB phase indication lamps with control SP MCB 2Amp.
-
-
-
Busbar :
-
-
-
800A TPN Al. Busbar insulated with heat shrinkable sleeves and shall be color coded.
-
-
-
Outgoings :
-
-
-
2 sets of 50 KVAR LT power capacitor banks.
-
-
-
4 sets of 25 KVAR LT power capacitor banks.
-
-
-
2 sets of 12.5 KVAR LT power capacitor banks.
-
-
-
2 sets of 5 KVAR LT power capacitor banks.
-
-
-
2 Nos, 125 Amps TP MCCB, 36KA with 120A, capacitor duty contactor.
-
-
-
4 Nos, 63 Amps TP MCCB, 36KA with 60A, capacitor duty contactor.
-
-
-
2 Nos, 32 Amps TP MCCB, 36KA with 32A, capacitor duty contactor.
-
-
-
2 Nos, 16 Amps TP MCCB, 36KA with 16A, capacitor duty contactor.
-
-
-
Capacitor Panel 235 kVAR, described as above.
2
-
-
Emergency/ DG Synchronisation Panel:-
-
-
-
Location : Basement
-
-
-
Incomer :
-
-
-
Four (4) Nos. 315A 4P MCCB (25KA)
-
-
-
Incomer shall be provided with the following: (for each)
-
-
-
One (1) No. digital multifunction meter for measurement of voltage and currents with selector push buttons and one set of CT's of ratio 300/5A, CL-1.0, 15VA (ELF-3259 of Conzerv or equivalent).
-
-
-
3 Nos. phase indication lamps and 3 Nos. status indication lamps for ON/OFF/ Trip with control SP MCB.
-
-
-
Busbar :
-
-
-
400A TPN Al. Busbar of short circuit withstands capacity of 50kA. Busbar shall be insulated with heat shrinkable sleeves and shall be color-coded.
-
-
-
Bus Coupler (1 No.) :
-
-
-
One (1) No. 315A 4P EDO ACB, 50KA (Mechanically & Electrically interlocking with transformer and Bus-bar)
-
-
-
Outgoing :
-
-
-
One (1) Nos. 200A, 4P, MCCB (36KA)
-
-
-
One (1) Nos. 160A, 4P, MCCB (36KA)
-
-
-
Two (2) Nos. 125A, 4P, MCCB (36KA)
-
-
-
Two (2) Nos. 100A, 4P, MCCB (36KA)
-
-
-
Two (2) Nos. 63A, 4P, MCCB (36KA)
-
-
-
Emergency/ DG Synchronisation as described above.
1
-
-
Sub panel (MDB) (Parking Area) :-
-
-
-
Location : Basement_Electrical Room
-
-
-
Incomer :
-
-
-
One (1) No. 125A 4P MCCB (36KA).
-
-
-
Incomer shall be provided with the following:
-
-
-
One (1) No. digital multifunction meter for measurement of voltage and currents with selector push buttons and one set of CT's of ratio 125A /5A, CL-1.0, 15VA (ELF-3259 of Conzerv or equivalent).
-
-
-
3 Nos. phase indication lamps and 3 Nos. status indication lamps for ON/OFF/ Trip with control SP MCB.
-
-
-
Busbar :
-
-
-
150A TPN Al. Busbar of short circuit withstand capacity of 35kA. Busbar shall be insulated with heat shrinkable sleeves and shall be color coded.
-
-
-
Outgoing :
-
-
-
Ten (10) Nos. 40A, 4P, MCCB (25KA)
-
-
-
Sub panel (Parking Area) as described above.
1
-
-
Fire Fighting Panel
-
-
-
Location : Basement
-
-
-
Incomer :
-
-
-
One (1) No. 200A TPN MCCB (36KA)
-
-
-
Incomer shall be provided with the following:
-
-
-
One (1) No. digital multifunction meter for measurement of voltage and currents with selector push buttons and one set of CT's of ratio 200A /5A, CL-1.0, 15VA (ELF-3259 of Conzerv or equivalent).
-
-
-
3 Nos. phase indication lamps and 3 Nos. status indication lamps for ON/OFF/ Trip with control SP MCB.
-
-
-
Busbar :
-
-
-
200A TPN Al. Busbar of short circuit withstand capacity of 36kA. Busbar shall be insulated with heat shrinkable sleeves and shall be color coded.
-
-
-
Outgoing : (with Star-Delta Starter)
-
-
-
Two (2) Nos. 125A, TPN, MCCB (25KA)
-
-
-
Four (4) Nos. 63A, TPN, MCCB (25KA)
-
-
-
Two (2) Nos. 40A, TPN, MCCB (25KA)
-
-
-
Fire Fighting Panel as described above.
1
-
-
Lift Well/ Lift Lobby Pressurisation Panel :-
-
-
-
Location : Terrace
-
-
-
Incoming (1No) :
-
-
-
One (1) Nos. 63 Amp 4P MCCB, 25 KA
-
-
-
Metering (Each Shall have the following):
-
-
-
One (1) No. (0-500V) Digital voltmeter with selector switch & control MCB's
-
-
-
One (1) No. (0-60A) Digital ammeter with Selector Switch and suitable ratio, CL-1, 10VA CT's
-
-
-
Phase indication lamps each backed up with 2 Amps MCB and ON/OFF switch.
-
-
-
Bus Bar:
-
-
-
100 Amp, TPN Aluminium, colour coded, Sleeved bus bars suitable for 415V, 50Hz (after derating).
-
-
-
Outgoing:
-
-
-
Eight (8) Nos. 40 Amp 4P MCCB (25 KA).
-
-
-
Lift Well Pressurisation Panel described as above
1
-
-
Ventilation Panel :-
-
-
-
Location : Basement
-
-
-
Incoming (1No) :
-
-
-
One (1) Nos. 100 Amp 4P MCCB, 25 KA
-
-
-
Metering (Each Shall have the following):
-
-
-
One (1) No. (0-500V) Digital voltmeter with selector switch & control MCB's
-
-
-
One (1) No. (0-100A) Digital ammeter with Selector Switch and suitable ratio, CL-1, 10VA CT's
-
-
-
Phase indication lamps each backed up with 2 Amps MCB and ON/OFF switch.
-
-
-
Bus Bar:
-
-
-
150 Amp, TPN Aluminium, colour coded, Sleeved bus bars suitable for 415V, 50Hz (after derating).
-
-
-
Outgoing:
-
-
-
Eight (8) Nos. 40 Amp 4P MCCB (25 KA).
-
-
-
Ventilation Panel described as above
1
-
-
UPS Outgoing Panel :-
-
-
-
Location : Basement_UPS Room
-
-
-
Incoming (1 No) :
-
-
-
One (1) Nos. 63 Amp 4P MCCB, 25 KA
-
-
-
Metering (Each Shall have the following):
-
-
-
One (1) No. (0-500V) Digital voltmeter with selector switch & control MCB's
-
-
-
One (1) No. (0-60A) Digital ammeter with Selector Switch and suitable ratio, CL-1, 10VA CT's
-
-
-
Phase indication lamps each backed up with 2 Amps MCB and ON/OFF switch.
-
-
-
Bus Bar:
-
-
-
100 Amp, TPN Aluminium, colour coded, Sleeved bus bars suitable for 415V, 50Hz (after derating).
-
-
-
Bus Coupler (1 No.) :
-
-
-
One (1) No. 63 Amp 4P MCCB, 25 KA
-
-
-
Outgoing:
-
-
-
Eight (8) Nos. 40 Amp 4P MCCB (25 KA).
-
-
-
UPS Outgoing Panel described as above
2
-
-
Plumbing Load:-
-
-
-
Location : Basement_Electrical Room
-
-
-
Incomer :
-
-
-
One (1) No. 125A 4P MCCB (35KA).
-
-
-
Incomer shall be provided with the following:
-
-
-
One (1) No. digital multifunction meter for measurement of voltage and currents with selector push buttons and one set of CT's of ratio 125A /5A, CL-1.0, 15VA (ELF-3259 of Conzerv or equivalent).
-
-
-
3 Nos. phase indication lamps and 3 Nos. status indication lamps for ON/OFF/ Trip with control SP MCB.
-
-
-
Busbar :
-
-
-
150A TPN Al. Busbar of short circuit withstand capacity of 35kA. Busbar shall be insulated with heat shrinkable sleeves and shall be color coded.
-
-
-
Outgoing :
-
-
-
Three (3) No. 100A, 4P MCCB, 25 KA
-
-
-
Two (2) No. 63A, 4P MCCB, 25 KA
-
-
-
One (1) Nos. 40A, 4P, MCCB (25KA)
-
-
-
Sub panel (Parking Area) as described above.
1
-
-
Isolator Box : (MLCP + Commercial)
-
-
-
Supply & fixing, testing and commissioning of Lockable isolator box in powder coated MS enclosure suitable for wall mounting and floor mounting with provisions of incoming and outgoing cables. The protection class of the Isolator Box shall be IP-55 & the rating should be as follows:
-
-
-
32 Amp 4 Pole Isolator
448
-
-
SUB HEAD - V : LIGHT FIXTURE & FAN
-
-
-
Supply, Installation, Testing & Commissioning of 15/18W LED surface mounting downlight with high performance LEDs with suitable wattage as per design, Aluminium powder coated white after phosphochromate treatment heat sink. LED module is mounted on FR4 with system lumen efficacy of 100lm/W to enhance the lumen output and viewing angle of 120° to ensure better uniformity. Powered by an integral SELV Output electronic LED driver, Surge protection & other reliability test. Lumen Output of 1500 lumens.CRI 80, Color temperature 5700K, THD 10% and PF 0.95,IP20, Life class of 50,000 hrs @ L70, Operating Temperature:-10 TO +45 DEG.C; Input Supply Voltage Range:140-270 V, Frequency :50-60 HZ; Internal Surge Protection:3 KV. Havells Cat Ref. :- LHEAABP6IL1W018 or approved Equivalent.
257.4
-
-
Supplying, Installation, Testing and Commissioning of surface ceiling/wall mounted Batten luminaire with Luminous efficiency of luminaire 100 lm/W; color rendering index Ra 80; minimum system lumen output of 2000 Lumens and maximum system wattage of 10W; Dimension :- 300mm X 23mm X 36mm; Luminaire body acts as heat sink; Body of extruded aluminium profile and polycarbonate cover. (Mirror Light) Havells Cat Ref. :- LHLDESAARANA020 or approved Equivalent.
34.1
-
-
Supplying installation, testing & commissioning of surface mounted bulkhead along with 10W LED, IP 65, colour temperature 5700 K having efficacy not less than 100 lm/W, CRI ≥ 70, THD ≤ 10%, Powder coated MS, suitable diffuser, inbuilt electronic driver, including 3 core 1.5 sq.mm FRLS PVC insulated and PVC sheathed copper conductor cable and earthing etc. upto suitable point complete as required. Havells Cat Ref. HEXAFT10WLED857SSYMBOPC or approved equivalent.
272.8
-
-
Supply, Installation, Testing and Commissioning of 2 X 18W LED SURFACE LIGHT complete with all accessories as required.
451
-
-
Supply, Installation, Testing and Commissioning of IP 20 Batten Luminare of CRCA Body suitable of 1x18W LED (Ceiling Mounted) Tube of system lumen of 2000 Lumen, Color Temperature of 6500K, Power Factor 0.9 with THD15%. LM 79 and LM 80 reports need to be submitted from Govt accredited lab to verify above parameters, complete with all accessories as required.
Make : BAJAJ BLRB-DB 118 with 1x18W LED Tube or equivalent.
743.6
-
-
Supply, Installation, Testing & Commissioning of 20W LED tube Aluminum housing, IP 20 ,colour temperature 6500 K having efficacy not less than 100 lm/W, CRI ≥ 70 ,THD ≤ 15%, suitable diffuser, inbuilt electronic driver, operating temp -10 °C to +45 °C, voltage range: 140 V - 270 VL70B50: 50000 hours polycarbonate cover, suitable diffuser, inbuilt electronic driver upto suitable point complete as required. Havells Cat Ref. :- LHEXACP7FN1W020 or approved Equivalent.
102.3
-
-
Supplying, Installation, Testing and Commissioning of 15 watt LED Wall bracket (COLOUR TEMPERATURE2700/ 3000 K) LED Luminaire with Stainless steel construction IP 44 complete with integral electronic driver and life of 30000 burning hours or more etc as required.
Havells Cat Ref. :- CLIOLL15WLED730PSYMTOTUG or approved Equivalent.
47.3
-
-
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.
25.3
-
-
Supply, Installation, testing and Commissioning of Exit Signage Light with 3hrs Battery Backup Twin Side available in Green/Red Colour.
14
-
-
SUB HEAD - VI : CCTV & ACCESS CONTROL SYSTEM
-
-
-
CCTV SYSTEM
-
-
-
Supply, installation, testing and commissioning of 5 MP IP PTZ Camera with 30X with 200 mtr IR Range 1/1.9" CMOS Image sensor, Max 30fps@5Mp and 60fps@1080P resolution, Powerful 30x Optical zoom, DWDR, Day/Night (ICR), 3D DNR, Defog, EIS, BLC, HLC,AGC, IR Range of 200 Mtr., Support Hi-PoE, Built-in 7/2 alarm in/out, IP67, IK10
6.6
-
-
Supply, installation, testing and commissioning of 5 MP Bullet camera, ONVIF profile S ,G & T . UL, CE, FCC Certified ,1/2.8” Progressive Scan CMOS ,2.7 mm to 12 mm motorized varifocal lens, Quad stream with each stream support H.265+ compression simultaneously ,min illumination : 0.01 Lux @ (F1.2,AGC ON), 0 Lux with IR , Shutter speed : 1/ 5s ~ 1/ 100,000 s ,120 dB WDR , Compression : H.265+ ,H.265 ,H.264+ H.264 .SD card support , Alarm trigger - 1 input/ 1 output, frame rate : Main stream should support 25 fps@5MP, Edge analytics : line crossing, perimeter intrusion, Face detection (deep learning), pedestrian detection ,cross counting, stationary object, In built IR LED, IR Distance upto 50 meters, IP 67, IK 10 housing, POE.
83.6
-
-
Supply, installation, testing and commissioning of 5 MP Dome camera, ONVIF profile S, G& T, UL, CE, FCC Certified, 1/2.8” Progressive Scan CMOS, 2.7 mm to 12 mm motorized varifocal lens, Quad stream with each stream support H.265+ compression simultaneously ,min illumination : 0.01 Lux @ (F1.2,AGC ON), 0 Lux with IR , Shutter speed : 1/ 5s ~ 1/ 100,000 s,120 dB WDR , Compression : H.265+ ,H.265, H.264+ H.264 .SD card support upto 128GB, Alarm trigger - 1 input/ 1 output, frame rate : Main stream should support 25 fps@ 5MP, Edge analytics : line crossing, perimeter intrusion, Face detection(deep learning), pedestrian detection ,cross counting, stationary object, In built IR LED, IR Distance upto 40 meters, IP 67, IK10, POE.
40.7
-
-
Supply installation testing & comissioning of NVR with Video input for 04 camera, 1 SATA Interface, Each SATA support 4 TB Hard disk required for minimum 30 Days recording Simultaneous HDMI and VGA outputs at up to 1920×1080 resolution. Support network detection, including network delay, packet loss, etc. Support enabling H.264+ compression,1 USB 2.0, recording on motion, scheduled or alarm based, 25Mbps incoming bandwidth, Built in RJ - 45 Self adaptive 100MBps ports, 1 No. USB Port.
25
-
-
Supply installation testing & comissioning of (24/7) working VIDEO SURVELLIANCE HARD DISK 4 TB
2
-
-
Supply installation testing & comissioning of 42 Inch Monitor for display.
4
-
-
Supply installation, testing & comissioning of 19" 9U Rack for Switches complete as required.
9
-
-
Supply installation testing & comissioning of 1000VA OFF LINE UPS with 20 mts backup
2
-
-
Supply, Installation, Testing & Commissioning of Access switch should have 24 x 10/100/1000 Base t POE ports with 4x 1000x SFP ports .Min 4 x10 G Based SFP+Port. The POE switch shall have min. 350W output. All the switches should be on the same IOS platform.
18
-
-
Integration & commisioning of System with one year site support.
1
-
-
ACCESS CONTROL SYSTEM
-
-
-
Supply, installation, testing & commisioning of IP based Access Controllers with Built in Face recognition cum card reader as per approved datasheet.
15
-
-
Supply, installation, testing & commisioning of Desktop based Modular Access Management software as per approved datasheet.
2
-
-
Supply, installation, testing & commisioning of Double Leaf with 600 LBS holding force as per approved datasheet.
5
-
-
Supply, installation, testing & commisioning of Single Leaf with 600 LBS holding force as per approved datasheet.
10
-
-
Supply, installation, testing & commisioning of Access Control Egress Switch as per approved datasheet.
15
-
-
Supply, installation, testing & commisioning of 2 KB Memory printable Smart Cards as per approved datasheet.
15
-
-
Supply, Installation, Testing & commissioning of Desktop as per approved datasheet.
2
-
-
Supply, Installation, Testing & commissioning of Project Accessories & Hardware including Nut, Bolt, Fixtures, ferrules, Identifiers, Cable Ties, Conectors of Different Types, junction Boxes, Steel wires, PVC sleeves, Screws, Electrical tapes, junction Boxes etc. Consumables etc. as per Site requirement.
2
-
-
Supply, installation, testing & commisioning of 0.75 Sq. mm X 8 cores, Flexible copper conductor PVC insulated, shielded & sheathed cable in existing Conduit.
500
-
-
Supply, installation, testing & commisioning of 3 X 1.5 Sq.mm, Copper conductor cable, PVC Insulated and overall sheated Cable in existing Conduit.
3000
-
-
Supply, installation, testing & commisioning of 'Heavy duty MS Conduit 25 mm including bend and 4 way junction box (Make: reputd brand)
3500
-
-
Supply, installation, testing & commisioning of Cat-6 Cable in existing Conduit (Make - D-link)
5500
-
-
BOOM BARRIER
-
-
-
Supply, Installation, Testing & Commissioning of Boom Barriers- Model New Up & Down 6 Length of Boom : unto 6 M
Duty Cycle: Intensive Opening- Closing Time : 2.5-4 seconds (Adjustable) With –in Built crash protection feature manual over-ride, Integration with Smart card and proximity reader, Along with push button for opening and closing of Barrier With Safety rubber at bottom. Photocell included for auto closing
3
-
-
SUB HEAD - VII : FIRE ALARM SYSTEM
-
-
-
FIRE ALARM CONTROL PANEL
-
-
-
Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories. The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications.
-
-
-
Ten Loop Panel.
1
-
-
Supplying, installation, testing & commissioning of central graphical fire alarm management system to centrally monitor and operate the fire alarm system complete as required.
1
-
-
Supplying, installation, testing & commissioning of repeater panel wih 320 character/ Touch screen LCD display with inbuilt reset, acknowledge and silence switches complete as required.
5
-
-
Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required.
-
-
-
Below False Ceiling
27.5
-
-
Above False Ceiling
27.5
-
-
Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required.
27.5
-
-
Supplying, installation, testing & commissioning of fault isolator complete with base as required.
10
-
-
Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor complete with base as required.
19.8
-
-
Supplying, installation, testing & commissioning of addressable fire control module complete as required.
29.7
-
-
Supplying, installation, testing & commissioning of intelligent addressable duct detector including suitable Photo detector complete with base as required.
579.7
-
-
Supplying, installation, testing & commissioning of addressable manual call point complete as required.
29.7
-
-
Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required.
29.7
-
-
Supplying, installation, testing & commissioning of fire fighter telephone handset complete as required.
15.4
-
-
Supplying, installation, testing & commissioning of fire fighter phone jack complete as required.
29.7
-
-
Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required.
5000
-
-
Supplying, installation, testing & commissioning of 1.5/3/6W metal box ceiling/wall speakers complete as required.
27.5
-
-
Supplying, installation, testing & commissioning of digital audio amplifier 50 Watt, 25V rms operating at 240 Volt AC Supply complete as required.
1
-
-
Supply of GI Pre-fabricated Cable Tray complete with Coupler Plates, Fasteners, Clamps and Fixing Hardware as required.
-
-
-
150 mm wide
500
-
-
300 mm wide
400
-
-
450 mm wide
10
-
-
Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface/ recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required.
-
-
-
speaker cable Two pair, 2-core, 1.5 sqmm
500
-
-
SUB HEAD - VIII : LIGHTNING PROTECTION & EARTHING
-
-
-
LIGHTNING PROTECTION
-
-
-
Fixing clamp for (1500 mm) air terminal, DEHN Part No. 306029
11
-
-
Air Terminal 1.5 mtr. side wall, DEHN Part No.104250
0.1
-
-
Clamp for holding 1.5 mtr. air terminal on wire fence
12
-
-
Clamp for connecting air terminal rod to 8mm Conductor, DEHN Part No. 380116
12
-
-
Universal Clamp, DEHN Part No. 315119
12
-
-
Al Round Conductor on roof (Ø 8mm), Dehn Part No. 840008
360
-
-
Al Round Conductor Holder for wall with accessories wall plug & screw, Dehn Part No. 274150
360
-
-
Al Down Conductor (Ø 8mm), Dehn Part No. 840008
420
-
-
Al Down Conductor Holder for wall with accessories wall plug & screw, Dehn Part No. 274150
420
-
-
Test Clamp, Dehn Part No. 459139
11
-
-
GI Strip for Down Conductor to earth (25x6 mm)
165
-
-
GI Strip holder (25x6 mm)
165
-
-
17.2 mm Copper bonded UL listed rod of 3 mtr length
10
-
-
Environment friendly, RoHS certified, low resistivity Ground Enhancement material in 22.6 Kg pack to fill the bore area around the rod.
10
-
-
StSt 316 grade clamp to terminate the load on earth electrode
10
-
-
Poly Plastic Pit Cover
10
-
-
GI Strip 25x6mm for Interconnecting Earth Pits
300
-
-
EARTHING
-
-
-
Earthing with G.I. earth pipe 4.5 mtr long, 40 mm dia including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
32
-
-
Earthing with G.I. earth plate 600mm x 600mm x 6mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.
22
-
-
Earthing with copper earth plate 600mm x 600mm x 3mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.
10
-
-
Supply, installation, testing and commissioning of following sizes of GI/ Copper strip/wire clamped to walls, cable trays, bus ducts, cables in recess or surface etc for equipment/ System earthing complete as required including inter connection between length at joints, all fixing accessories such as Earth bar, saddles, clamps, lugs etc and other fixing hardware material as required for proper installation.
-
-
-
G.I. Earthing Strip/Wire:
-
-
-
50 x 6 mm strip
150
-
-
25 x 3 mm strip
480
-
-
8 SWG wire
350
-
-
CU. Earthing Strip/Wire:
-
-
-
50 x 6 mm strip
150
-
-
25 x 3 mm strip
100
-
-
MAINTENANCE FREE CHEMICAL EARTH PIT
-
-
-
1 No. copper bonded solid steel earth electrode with dia of 17.2 mm, 3 mtr length, UL Listed with copper thickness of 250 microns.
10
-
-
22.6 Kgs. of GC+ Environmental friendly ROHS certified low resistivity backfill compound as per IEEE 14.5D for 4” dia, 3mtr long deep bore. The Compound should not leach/defuse into the ground and shall also not affected by drought. It should be electronically conductive and is not dependent on moisture. it should protect copper from corroding. The compound shall not contain any hazardous chemicals.
10
-
-
StSt 316 grade clamp to terminate the load on earth electrode
10
-
-
Poly Plastic Pit Cover
10
-
-
SUB HEAD - IX : DG SETS AND ALLIED SERVICES
-
-
-
SITC OF DG SETS :
-
-
-
Design, fabrication, loading, unloading as directed by Engineer-in-Charge, supply, installation, testing and commissioning of 3 phase 415 volts 50 cycle per second, following Rating Radiator Cooled DG Set 1500 RPM prime duty, radiator cooled Diesel Generator Sets. The engine shall be completed with turbo charger, flywheel to suit flexible coupling with guard, air cleaner, blower fan, heat exchanger, fuel pump, variable speed electronic governor, fuel filter, lub oil filter and pump, primary water circulating pumps, battery charger, 12/24 volt batteries of compatible capacity, MS battery stand and instrument panel comprising of switch with key, lub oil pressure gauge, battery charging voltmeter, safety control for low lub oil pressure with tripping etc. The alternator shall be self excited, self regulated, brushless and continuously rated at 0.8 P.F., 3 phase 415 volts, 50 cycle per second, 4 wire system and shall be provided with static excitation unit.
-
-
-
Alternator insulation shall be class 'H' suitable to withstand tropical conditions and shall generally comply with latest upto date amendment to IS Code. The overload capacity shall not be less than 110% of rated capacity for 1 hour in every 12 hours. The DG Sets shall be mounted on a fabricated rigid common base frame with anti-vibration mountings to provide 98% vibration isolation. The DG set shall include all accessories, fittings, instruments and standard tool kit complete as per specification and as required including control cabling. The cost shall include providing and fixing adaptor box for cable termination as required.
-
-
-
200 KVA DG Set
2
-
-
EXHAUST PIPING
-
-
-
Supply, laying of following sizes of MS Piping for Exhaust system as per IS:
-
-
-
3589 and 1239 (part - I) including providing suitable flanges, reducers at suitable intervals, painting etc. as required as per drawings and specifications.
-
-
-
100mm (NB) MS ERW pipe 4.85mm thick
50
-
-
Supply of MS bends of above thickness same as above piping along with necessary hardwares ets.:
-
-
-
100mm dia 90 deg bend
6
-
-
Supply of 75mm thick Rockwool LRB mattress insulation (of 150 Kgs. Per cubic meter density) over the exhaust pipes of following diameter including cladding with aluminum sheet of 26 SWG and covering from outside complete as required suitable for DG exhaust pipe temp. upto 450OC etc. as per specifications (for horizontal pipes).
-
-
-
100mm (NB)
40
-
-
Insulation of silencers for 200 KVA DG Set
2
-
-
Supply of miscellaneous structural support for horizontal/ vertical exhaust piping including fabrication, hardwares and painting as per specifications.
500
-
-
Supply & Fixing of SS expansion joints for horizontal/ vertical exhaust pipes as required at site:
-
-
-
100 mm exhaust SS Bellows (200mm long)
6
-
-
MISCELLANEOUS
-
-
-
Control Cable:
-
-
-
Supplying, laying, installation, testing and commissioning of the following sizes of 1.1 KV grade PVC insulated and PVC sheathed copper conductor armoured stranded control cable conforming latest IS complete as required.
-
-
-
2 Core x 2.5 Sq.mm Cable
50
-
-
4 Core x 2.5 Sq.mm Cable
50
-
-
10 Core x 2.5 Sq.mm Cable
50
-
-
Control Cables termination:
-
-
-
Supplying of all materials and making terminations of control cable terminations for control cables above item complete with single brass compression glands, copper lugs etc. as required.
-
-
-
2 Core x 2.5 Sq.mm Cable
4
-
-
4 Core x 2.5 Sq.mm Cable
4
-
-
10 Core x 2.5 Sq.mm Cable
4
-
-
SUB HEAD - X : OIL FILLED TRANSFORMERS
-
-
-
Design, manufacture, loading, unloading, supply, Supervision of Installation testing and commissioning on location as desired by project manager or as shown in layout plan of 800 KVA, oil filled 11 KV/433V, 3 phase, 50 Hz, delta/star connected with additional neutral of LT winding brought out to separate bushing terminal for earthing, oil immersed ONAN cooled, complete with all fittings such as oil conservator, silica gel breather, thermometer, explosion vent, ON LOAD Tap changer with +5% & -15% tappings in steps of 1.25%, diagram & rating plate, oil temperature indicator, winding temperature indicator and buccholtz relay with wiring upto marshalling box, lifting lugs, first filling of oil, and weather proof 11KV HT cable box, LT cable chamber minimum 8mm thick non magnetic gland plate etc. complete as per specification and as per IS : 1180 latest amendment upto date. (The transformer shall be subject to all test specified in specification and test certificates shall be produced). The Transformer shall comply to IS: 1180, Losses shall be as per Level-1. Core shall be of prime metal grade CRGO with boltless design.
-
-
-
Transformer to be installed in Dehradun.
-
-
-
Provision for CTs for REF protection shall be provided (CTs shall be provided loose as free issue item by the LT Panel Manufactrure to be fixed by Transformer Manufacturer either at site or works as the case may be)
-
-
-
Voltage Ratio : 11 / 0.433 KV
-
-
-
Vector Group : Dyn11
-
-
-
Tap Range [ON Load] : +5% to -15% step of 1.25% (As per IS : 1180)
-
-
-
Insulation Class : 'A'
-
-
-
Temperature rise of OIL by thermometer method @ 50 deg C over ambient (Shall bear as per IS : 1180)
-
-
-
Temperature rise in winding by resistance method @ 55 deg C over ambient (Shall bear as per IS : 1180)
-
-
-
Impedance : 5.0 %
-
-
-
Terminal arrangement (HV) : 1RX3CX240 Sqmm 11 KV
-
-
-
Terminal arrangement (LV) : 3RX3.5Cx300 Sq.mm
-
-
-
800 KVA Transformer as described above
3
-
-
SUB HEAD - XI : 11KV HT PANELS & HT CABLES
-
-
-
11KV HT PANELS
-
-
-
11 KV H.T. VCB FOUR BREAKER PANEL BOARD
(1 INCOMMING + 3 OUTGOING)
-
-
-
Supply, Receiving, Unloading, Shifting, Storing, Installation Testing & Commissioning of 11 KV Four Breaker Vacuum Circuit Breaker Panel Board as 1 Incomming, 3 Outgoing and shall be metal clad floor mounting complete as per BOQ, specification and tender drawing as described.
-
-
-
630 A Vacuum circuit breaker of (350 MVA) 18.4 KA ruputuring capacity at 11 KV rated, totally enclosed, air insulated metal clad housing, floor mounting, horizontal isolation, vermin proof, fully interlocked horizontal drawout type having isolation features and control devices complete with the following:
-
-
-
Manually and motor operated, spring charged (release closing mechanism) trip free type, triple pole truck/trolley mounted draw out, vacuum circuit breaker, incorporating mechanical as well as electrical ON/OFF indication. Spring charge/ discharge mechanical indication "OFF" push buttons for emergency trip (shrouded) test/service position limit switches with 6 NO/6 NC breaker auxilliary contacts in service position, 24 Volts DC shunt trip coil and strip heater to prevent moisture absorption.
-
-
-
HT panel shall be Internal arc tested as per IEC standard & manufacturer shall submit test report certificate.
-
-
-
INCOMING PANEL - 1 NO.
-
-
-
1 No. 630 A Vacuum circuit breaker of (350 MVA) 18.4 KA ruputuring capacity at 11 KV rated, totally enclosed, air insulated metal clad housing, floor mounting, horizontal isolation, vermin proof, fully interlocked horizontal drawout type having isolation features and control devices complete with the following:
-
-
-
3 No. Single Phase double core current transformer 250/125/5 Amp epoxy cast insulated class of insulation E.
-
-
-
Core 1-15VA burden class 1.0 for metering.
-
-
-
Core 2-15VA burden class 5P10 for protection.
-
-
-
P.T's of 11KV/1.732, 110V/1.732, 100VA with suitable rating H.T. & L.T. fuse conforming to relevant IS Standards and complete as required.
-
-
-
One no. numerical microprocessor based three phase over current (IDMT element) (2 O/C+1E/F) with earth fault relay with instantaneous elements.
-
-
-
1 No. Anti Pumping device.
-
-
-
1 No. Circuit breaker control switch for electrical (T/N/C).
-
-
-
1 No. limit switch for test & service position.
-
-
-
1 No. Voltmeter (0-12KV) with selector switch. (96mm square)
-
-
-
1 No. Ammeter (0-250Amp) with selector switch. (96mm square).
-
-
-
1 No. electronic type digital energy analyser having 30 days memory and parameters of KW, KWH, Power factor, frequency etc. Suitable for BMS compatible with all accessories.
-
-
-
1 Set of following indicating lamps.
-
-
-
Red, Yellow & Blue for phase indication.
-
-
-
Amber for Trip indication.
-
-
-
Red `ON' Green `OFF'
-
-
-
Spring charge indication.
-
-
-
Auto trip indication.
-
-
-
1 No. hooter with hooter acceptance and reset push button.
-
-
-
1 no. master trip relay similar to PQ8 (ABB) or equivalent.
-
-
-
Trip circuit supervision relay similar to TCS or equivalent.
-
-
-
800A color coded heat shrinkable sleeved TP Copper busbar of 350 MVA fault rating.
-
-
-
1 Set of fuses, ferrules, wiring etc. as required.
-
-
-
Note: All spare contacts of breaker or any other equipment inside the breaker shall be wired upto the outgoing terminal strip with appropriate ferrules/ coding. The terminal strip rating shall be suitable for connecting two wires of 2.5sqmm subjected to providing minimum size strip suitable for 4/6sqmm.
-
-
-
1 No. power pack (110V AC to 24V DC) with sealed maintenance free batteries suitable for 24V DC load of full VCB board.
-
-
-
OUTGOING PANEL - 3 NOs. (Each outgoing feeder shall have following)
-
-
-
1 No 630 A Vacuum circuit breaker of (350 MVA) 18.4 KA ruputuring capacity at 11 KV rated, totally enclosed,air insulated metal clad housing, floor mounting, horizontal isolation,vermin proof,fully interlocked horizontal drawout type having isolation features and control devices complete with the following:
-
-
-
3 No. Single Phase double core current transformer 120/60/5 Amp epoxy cast insulated class of insulation E.
-
-
-
Core 1-15VA burden class 1.0 for metering.
-
-
-
Core 2-15VA burden class 5P10 for protection.
-
-
-
One no. numerical microprocessor based three phase over current (IDMT element) (2 O/C+1E/F) with earth fault relay with instantaneous elements.
-
-
-
1 No. Anti Pumping device.
-
-
-
1 No. Circuit breaker control switch for electrical (T/N/C).
-
-
-
1 No. limit switch for test & service position.
-
-
-
1 No. Voltmeter (0-12KV) with selector switch. (96mm square)
-
-
-
1 No. Ammeter (0-120Amp) with selector switch. (96mm square).
-
-
-
1 No. electronic type digital energy analyser having 30 days memory and parameters of KW, KWH, Power factor, frequency etc. Suitable for BMS compatible with all accessories.
-
-
-
1 Set of following indicating lamps.
-
-
-
Red, Yellow & Blue for phase indication.
-
-
-
Amber for Trip indication.
-
-
-
Red `ON' Green `OFF'
-
-
-
Spring charge indication.
-
-
-
Auto trip indication.
-
-
-
1 No. hooter with hooter acceptance and reset push button.
-
-
-
1 no. master trip relay similar to PQ8 (ABB) or equivalent.
-
-
-
Trip circuit supervision relay similar to TCS or equivalent.
-
-
-
1 Set of fuses, ferrules, wiring etc. as required.
-
-
-
3 No. VAA33 auxiliary relay for transformer fault, alarm and trip.
-
-
-
12 Annunciator window for all electrical and transformer fault.
-
-
-
Note: All spare contacts of breaker or any other equipment inside the breaker shall be wired upto the outgoing terminal strip with appropriate ferrules/ coding. The terminal strip rating shall be suitable for connecting two wires of 2.5sqmm subjected to providing minimum size strip suitable for 4/6sqmm.
-
-
-
1 Set of Power Pack 110 Volt A.C./ 24 Volt D.C.complete as required.
-
-
-
H.T. Panel describe as above
1
-
-
11 KV Cable
-
-
-
Laying of one number XLPE power cable of 11 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.
-
-
-
Upto 120 sq. mm
0.1
-
-
Laying of one number XLPE power cable of 11 kV grade of following size in the existing RCC/ HUME/ METAL pipe as required.
-
-
-
Above 120 sq. mm and upto 400 sq. mm
160
-
-
Supply of HT Cable
-
-
-
Supply of following sizes of 11 KV cables conforming to the data given below:
-
-
-
Guaranted Technical Particulars for 11 KV Cables
-
-
-
Conductor :
-
-
-
Core/Size : 3
-
-
-
Material : Aluminium
-
-
-
Shape : Circular
-
-
-
Type : Stranded
-
-
-
Insulation :
-
-
-
Material : XLPE
-
-
-
Inner Seath:
-
-
-
Material : PVC(ST1/ST2)
-
-
-
Type : Extruded
-
-
-
Armour:
-
-
-
Material : GI
-
-
-
Type : Flat
-
-
-
Outher Sheath:
-
-
-
Material : HR PVC
-
-
-
Type : ST 2
-
-
-
FRLS : Not required.
-
-
-
Drum Length : As per Site requirement
-
-
-
3 C x 240 Sq.mm XLPE HT cable (Earthed)
160
-
-
HT Cable Termination
-
-
-
Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 kV grade as required.
-
-
-
240 sq. mm
4
-
-
Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 kV grade as required.
-
-
-
240 sq. mm
3
-
-
SUB HEAD - XII : UPS SYSTEM
-
-
-
Supply, installation, testing & commissioing of Following rating UPS in paralleling mode at 0.99 input power factor with SNMP card, compatible for BMS connectivity on backnet/MODBUS, as per specification given in the document with following broad features.
-
-
-
THD(i) shall be less than 3% in the entire loading range.
-
-
-
Input power factor shall be more than 0.95. from 25% to 100% load.
-
-
-
UPS shall carry design output at 40 deg.
-
-
-
Shall have soft start and hold of for incoming supply.
-
-
-
Invertor capability to supply 150% load for 5 sec.
-
-
-
Three Phase Input and Three Phase Output. (Input - 340V - 470V, Three Phase, 4 wire. / Output - 400-415 Volt, Three Phase, 4 Wire.)
-
-
-
Shall not allow deep discharge of the battery and shall not go to 10.5 volts in case of 12 volt cells.
-
-
-
Battery shall be external type with rack and suitable for 15 minute backup on 100% load. Battery to be included in UPS cost
-
-
-
UPS shall be compatible for minimum 4 nos unit in parallel operation. (Synchronize). Parallel operation kit shall be supplied with UPS.
-
-
-
1 X 10 KVA UPS.
2
-
-
SUB HEAD - XIII : EXTERNAL LIGHTING
-
-
-
Design, manufacture, supply, installation, testing and commissioning of following Feeder Pillars suitable for 415 V, 3 phase, 4 wire, 50 Hz power distribution system. The panel shall be Weather Proof, suitable for outdoor application, free standing, peadestal mounting, sheet metal clad, cubicle, dead front, dust and vermin proof type compartmentalised design fabricated out of 14 SWG CRCA sheet steel, complete with colour coded, heat shrinkable PVC insulated, aluminium bus bars and separate earth bus bar of adequate cross section through out the length of the panel. The incoming and outgoing feeders shall be accommodated in a fully segregated, modular multitier arrangement with adequate size and distinct cable alley, bus bar alley/chamber. The panel shall be complete with name plate, earthing, numbering, danger plate etc. as required and as per specifications and drawings.
-
-
-
Feeder Pillar (Weather Proof) :
-
-
-
FEEDER PILLAR
-
-
-
Incoming-
-
-
-
100A FP MCCB with 25A DP ELCB (100mA) for each phase.
-
-
-
Three (3) Nos. 25A DP Contactor (AC 3 Duty with 230V Control Coil)
-
-
-
One (1) Nos. 25A 4P ELCB (100mA) with 25A 4P Contactor (AC 3 Duty with 230V Control Coil)
-
-
-
Four (4) Nos. 24 hour double dial programmable time switch on Auto mode arrangement for Auto/Manual selection, Push Buttons, Indication lamps & Control fuses etc as per drawings and as required.
-
-
-
One (1) no. Mushroom head type emergency stop push button with under voltage release.
-
-
-
Busbar :
-
-
-
150A TPN Al busbar
-
-
-
Outgoing:
-
-
-
2 Nos 32A 4P MCB.
-
-
-
8 Nos. 16A DP MCB.
-
-
-
2 Nos. 16A DP MCB with out Timer.
-
-
-
Feeder Piller describe as above.
2
-
-
Supply, installation, testing and commissioning of 35W Pole light with all material as required to be mounted on existing 3.0 Meter High Poles with single arm Braket (suitable for an over-hang of 1.5 Mtr.). Philips Cat No : SGP301 1x SON 70 W FG, Wipro Cat No : WST / H50 WST - 50070 1x 70 W HPSV(E), Bajaj Cat No :BGEST 0270 MH IP FFGWOB (For External Lighting)
50
-
-
Supply, Installation, Testing & Commissioning of 10W/M (76 lm/W) IP65 LED Strip Light, Al Extrusion Clear Dust Cover, CCT 2200K - 2700K - 3000K or 4000K - BLUE color, CRI 85+, Non Dim Remote driver, Dimension: L=As Per Plan, Minimum Guaranteed Burning 30,000 hours. Short Pitch Led Arrangement - Color Consistency Required Havells Cat Ref. :- FLEXISTRIP5MIP2024V/2ALED865MOD V1 or approved Equivalent.
500
-
-
Supply of LED Ground Mounted Bollard (0.7 m height) with a system lumen output of 900 lumens and a minimum system efficacy of 64 lm/W. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70 @ 35deg. The luminaire should have a color temperature of 6500K and CRI70. The luminaire shall meet IP65 & IK10 rating with THD 10% and PF 0.95. The luminaire housing should made of pressure die cast aluminium with polycarbonate diffuser. The total power consumption should not exceed 14W (including driver). Havells Cat Ref. :- CONEBLS8WLED830PSYMTOPC 9405 or approved Equivalent.
100
-
-
Supplying installation testing & commissioning of 45 W LED GATE LIGHT, Ethernet gateway range: To Allow custom GUIs to be created in HTML and Flash and run on smart phones, PCs and touchscreens The gateways are to be designed to provide remote control of sites and link multiple sites together, using the Internet for control opportunities or a project network management in a LAN backbone complete as required.
5
-
-
Supply, Installation, Testing & Commissioning of Exterior Grade 10w/ 15w/ 20w/ 25w/ 30w/ 35w/ 45W/ 50W/ 60W LED Recessed IN Ground Uplight Fixture With narrow or medium or wide or elliptical beam Distribution And Colour Temperature 3000K or 4000K, Non Dimmable driver, IP67 OR IP68, With Mounting Accessories as per Detail, AND OUTGOING CABLE PREFITTED-PRE TERMINATED at factory only.
5
-
-
SUB HEAD - XIV : SOLAR PHOTO VOLTAIC POWER GENERATION SYSTEM
-
-
-
Supply, Installation, Testing and Commissioning of ongrid Solar Photovoltaic Power Plant conforming to MNRE specifications as amended, consisting of Mono/ Poly Crystalline silicon solar cells, net metering facility, necessary protections, earthing, mounted on Aluminium/ GI structure of suitable strength with following components complete as required:- a) Solar Photovoltaic Module of capacity 330 Wp or above, manufactured in India, conforming to IS 14286/ IEC61215, IS/IEC 61730-Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 16.5%. PV modules used in solar power plants/ systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. b) Power Conditioning Unit (PCU) of 350-800 VDC Input voltage range and 400V AC, three phase, 4 wire, 50Hz +/- 2.5 Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 degree C. The PCU shall adjust the voltage and frequency level to suit the Grid Voltage Frequency. c) Data Monitoring System complete with accessories. d) Fixing of Array junction box & Main junction box with IP65 protection and termination arrangement for incoming and outgoingc able along with glands, lugs and other accessories etc. as required. e) Lightning and surge voltage protection. f) Connections & Interconnections by supplying & fixing required size XLPE insulated copper conductor 1.1 kV grade armoured power and control cables between solar modules, main power cable to grids upply PCU unit along with supplying & fixing of necessary channel/ conduit lugs and other accessories etc.as required.
100
-
-
SUB HEAD - XV : PARKING GUIDANCE SYSTEM
-
-
-
Supply, installation, testing and commissioning Automatic Ticket Dispenser with in-build universal compatible smart reader. Options for wired systems and capable to communicate via RS485/ TCP-IP link. Ticket Dispenser should be programmable for configurating date, time, gate no., etc. Entry level bar-code ticket Dispenser printer, 13.56 MHz proximity Mifare card subscribers reader, loop detector included, fan for cooling & ventilation, illuminated pushbutton (flush mounted) with all required mounting connectors and its accessories. Integrated Graphical Display Hardware: 600MHZ CPU, DDRII 512MB RAM,2GB FLASH, Display size: minimum 7 inch, Resolution: 800×480 TFT LCD, 16,000 colors, Interface: RS232/RS485/RS422 (5 COM ports available) Storage: Support Date Storage, SD Card, U Disk complete as required as per technical specification.
3
-
-
ANPR Camera with license & controller having accuracy up to 95% @60Kmp with IR Illuminator for night vision, Image Sensor-1/2.8” 2 Megapixel progressive CMOS (0.9070 cm),IR-IR Range of 60 mtr., Smart IR,Lens-2.7mm~13.5 mm Motorized,Motion Detection-OFF/ON (4 areas, rectangular),Power Consum ption-Basic: 2.3W (12V DC); 2.9W (PoE) Max. (WDR + IR intensity +Intelligence); 6.6W (12V DC); 7.7W (PoE), Weatherproof St andard-IP-67, IK-10 (Optional) with mouting pole
3
-
-
Supply, installation, testing and commissioning of Manned Payment Booth at EXIT consisting of POS station with Desktop Computing PC (Intel® Celeron® J1900 (2M Cache, 2.0/2.42 GHz(Burst), 4 Cores) 4 GB RAM, 500 GB HDD, Serial Interface port, USB Ports, graphical compatible display card, Keyboard, Mouse with Windows 10 based OS, 15" Monitor), POS License software, Bar code Ticket reader, USB to RS232 converter, Receipt barcode ticket printer for Manned Station,Courtesy display for Manned Station, 13.56MHz ISO card reader for manned station complete required as per technical specification.
1
-
-
Fastag redear and controller with mounting pole and accessories
3
-
-
Fastag user information display
3
-
-
WIFI Router
10
-
-
Supply, installation, testing and commissioning of Automatic Boom Barrier (up to 4 mtr) for outdoor, Electromechanical drive, 24V DC Power Supply, CE Certified, IP-65, extruded aluminium white colour boom arm, reflective red stickers, LED on boom, all housing and internal parts will be rust and corrosion free metal of high strength. The boom barrier will be suitable for operation automatically by RFID card/tags, ANPR cameras, remote from Guard Room with wired and wireless arrangement & manually, 100% intensive duty cycle,opening- closing time max 3 seconds (adjustable) with in built reverse on contact protection,manual over ride, push button, Loop Detector for Auto Closing, Integration with Smart card and proximity reader etc, MCBF 12 Million cycles.
4
-
-
Server for parking management and Guidance system with the Intel Xeon E5 Series (4 core, 1.8 GHz), 16 GB RAM, 1 TB SSD, 4 Hot Pluggable SFF drive, RAID enabled, license for (OS window server 2012 R2 or higher version &SQL), 18.5” / 19” TFT Color monitor,Key baord Mouse
1
-
-
24 Port Network switch with Standards -IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3z Gigabit Ethernet, IEEE 802.3x Flow Control, 802.1p priority, Energy Efficient Ethernet, cabling type Category 5e or better,10/100/1000 Ethernet, power port for AC adapter or power cord port,Devices supporting 802.3 Ethernet, 802.u Faster Ethernet, or 802.3ab Gigabit Ethernet Cat6 or better Ethernet cable
1
-
-
Parking management software with web based application and shall have provision for taking reports of parking entry & exit reports (daily wise, monthly wise, yearly wise, shift wise, operator wise, vehicle type wise etc.). It shall have provisions for taking detailed reports of vehicle movements, movement of vehicle using Passive proximity cards/ duration of stay of each vehicle and number of vehicles on timely wise, daily wise, monthly wise, yearly wise, gate/unit wise etc.The reports shall be able to be exported in Excel, PDF format
1
-
-
SITC of Combo device of Ultrasound Detector & LED Indicator (Red/Green) : To sense the vehicle occupancy with automatic detection. Ultrasonic detection sensing with RS485 as communication protocol, detectable range of 0.3m to 4.5m, Scope of detection: 15 deg, Operating temp:-20 to +60 Degree celcius. LED indicator should have common anode double color light design. The unit should have single module with standard baud rate & housing material with all required mounting connectors & Accessories. (For Covering all the five floor)
1069
-
-
SITC of ZONE CONTROLLER: Equipped with communication protocol: RS485, with Standard Baud rate, Maximum load quantity 28 loads. Minimum Communication distance: 400 mtrs, Working temp range: 5 deg C to 50 deg C. The above shall be housed in a vandal proof, lockable & secure PVC Cabinets to be supplied along with the Controllers and its necessary accessories.
39
-
-
SITC of FLOOR CONTROLLER: Operating voltage :AC220V± 10%, Communication protocol : RS485, with Standard Baud rate & the above shall be housed in a vandal proof, lockable & secure PVC Cabinets. To be supplied along with the Controllers & all other Required Necessary Accessories.
8
-
-
SITC of Informatory Signs Boards
-
-
-
SITC of full color LED matrix display of size (900X900mm) and Letter 5 mm ultra bright LED Matrix, IP 67. to shsow the vacant car space in the parking area with mouting pole and accessories.
4
-
-
Main Display at Entry Gate Of Building : 9 ROWS LED DISPLAY (For indicating total vacant slots at respective level). (Installation of the said display unit is at entrance of Parking main gate)
1
-
-
a) Height 6 inch with 4 digit
-
-
-
b) Letter 5 mm ultra bright LED Matrix
-
-
-
c) Every line will have seperate address in case of multiple lines
-
-
-
d) Power Supply - 230VAC
-
-
-
e) Communication through TCP-IP/RS 485
-
-
-
f) Out door display with weatherproof enclosure.
-
-
-
g) MS Powder coated Panel with all required accessories for mounting
-
-
-
MS pole for main display mounting with accessories
1
-
-
SITC of SINGLE ROW LED DISPLAY (For indicating total vacant slots at respective floor Entry Level).
9
-
-
a) Height 6 inch with 4 digit
-
-
-
b) Letter 5 mm ultra bright LED Matrix
-
-
-
c) Power Supply - 230VAC
-
-
-
d) Communication through RS 485
-
-
-
e) Out door display with weatherproof enclosure.
-
-
-
f) MS Powder coated Panel with all required accessories for mounting
-
-
-
SITC of SINGLE ROW LED DIRECTION DISPLAY (For indicating total vacant slots at respective floor zone Level).
85
-
-
a) Height 6 inch, with 4 digit includin arrow sign
-
-
-
b) Letter 5 mm ultra bright LED Matrix
-
-
-
c) Power Supply - 230VAC
-
-
-
d) Communication through TCP-IP/RS 485
-
-
-
e) Out door display with weatherproof enclosure.
-
-
-
f) MS Powder coated Panel with all required accessories for mounting
-
-
-
Work station PC, CPU Processors i5 or higher CPU 3.0 GHz or higher, 16 GB memory, 1 tb ssd,Window 8/10 or higher OS, 15" monitor with keyboard and mouse
1
-
-
Parking Guidance Software for all nodes
1
-
-
EV CHARGERS
-
-
-
DC EV CHARGER 60 KW
As per Bharat EV Specification
Connectors: CCS2 Dual Gun
AC input voltage: AC 380V±15%
AC input frequency: 45-65Hz
DC output voltage: 150 VDC – 1000 VDC DC output current: 0-133 Amp
Authorization: RFID, App, VIN IP55/IK10
*1 year’s warranty *5m cable *Ethernet *OCPP 1.6J
*7-inch LCD screen/LED light
54
-
-
CMS Charges (2500 Per Charger Per Year)
-
-
-
Supply of CABLES, CONDUITS & ACCESSORIES
-
-
-
Supply & laying of 4C x 1 sq mm Flexible Multistrand cable for signal/ power as per specification. (from Sensor & Devices to Controller) in MS Conduits on surface. As per system requirement to cover all the floors and parking slots.
6500
-
-
Threaded rods
M8 x 1000 with 4 Nut & washer.
6500
-
-
Supplu & Laying of Single Core 1.5 Sq mm Wire for Loop Coil
3500
-
-
Cable Specification for DC Charger (60 kw):- Cu-LT Panel to EV Charger 4 Core 25 Sqmm Cu Un armoured
2000
-
-
Supply & laying of CAT 6 Cable is (Make - D-link)
600
-
-
Supply & laying of 3C x 1.5 sq mm Power Cables Flexible Multistrand cable for signal / power as per specification in PVC Conduits on surface . As per system requirement to cover all the floors and parking slots.
2500
-
-
Cable Tray
Aluminium (Self Finish, ) Perforated cable tray with necessary coupler & hardware. PCT 50 x 25 x 2.00
6500
-
-
Heavy duty MS Conduit 25 mm including bend and 4 way junction box(Make: reputd brand)
3000
-
-
SUB HEAD - XVI : IP-PBX & LAN SYSTEM
-
-
-
Supply of IP Based voice Communication System with 04 Port Voicemail, 04 Port FXS, 04 Port FXO, 2 PRI Trunk lines (30 Ch) Circuit with CLIP Facility, 210 IP users License, 01 Nos. IP Operator Console, Speed Dial, Music on Hold, Internal/ External ring difference, Call Barring, Call Pickup, - Redundant server in active-Active mode.
1
-
-
Supply of IP Phone 1 VoIP account, Full duplex speaker phone, IPV6, 2xLAN, PoE.
30
-
-
Supply, Installation, Testing & Commissioning of fiber Modules 10G BASE
3
-
-
Supply, Installation, Testing & Commissioning of fiber Modules 1G BASE
3
-
-
Supply, Installation, Testing and comissioning of WLAN Controller should be Hardware appliance 1U Rack mountable/ Softaware Based based It should be supplied 120 AP licenses for the campus. If Software based, hardware and OS to be specified and supplied. It should Support Cloud based control if required without upgrade. Same Make of Switch and module.
1
-
-
L1 & L2: Passenger Lift (B+G+M+5)
-
-
-
Design Manufacture, Supplying delivery at site, Installation, Testing & Commissioning of Machine Room Less Gearless Elevator (Regenerating Type) in Shaft of dimensions 2350 mm x 3050 mm (W x D) for minimum payload carrying capacity of 24 passenger/ 1632 kg serving different floors as per specifications as under:-
-
-
-
Location of Lift : COMMERCIAL BLOCK
-
-
-
Speed: 1.5 meter per second (MPS)
-
-
-
Floor: Basement + Ground Floor + Mezzanine Floor + 5th Upper Floors
-
-
-
Travel: 30.25 mtrs. (Basement + Ground Floor + Mezzanine Floor + 5th Upper Floors)
-
-
-
Stops & Opening: 8 Nos.
-
-
-
Operation: Microprocessor Based Duplex Selective Collective Control with/ without Attendant.
-
-
-
Automatic rescue device complete with dry maintenance free batteries as required.
-
-
-
Controller: A.C. Variable Voltage Variable Frequency (ACVVVF)
-
-
-
Power: 400/415 Volts (3 Phase AC)
-
-
-
Type of doors:
-
-
-
Car: 1600 mm (W) x 2500 mm (D), Power operated, centre opening horizontal sliding Combination of Lacquered glass and clear glass with Anti scratch finish.
-
-
-
Ceiling : Aluminium/ Alloy + Acrylic finish.
-
-
-
Landing doors: 1100 mm (W) x 2400 mm high C/O Stainless Steel Hairline finish.
-
-
-
A flat heavy duty handrail of suitable length as per Lift Car dimension but not less than 800mm long at 900mm above floor level to be fixed on all three sides of the lift car.
-
-
-
Voice announcement system in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the elevators.
-
-
-
Braille signage/button both inside and outside of car.
-
-
-
Fire man switch
-
-
-
Automatic self landing feature to bring elevator CAR with in 0 to + 3mm of landing floor regard less of load and direction of Travel.
-
-
-
Flooring: 20mm recess for Granite/ Marble Stone flooring.
-
-
-
Fans and Light motion sensor based to confirm to Griha 3.0 Norms.
-
-
-
Passenger Lift describe as above.
2
-
-
L3 & L4: Passenger Lift (B+G+7+T)
-
-
-
Design Manufacture, Supplying delivery at site, Installation, Testing & Commissioning of Machine Room Gearless Elevator (Regenerating Type) in Shaft of dimensions 2350 mm x 3050 mm (W x D) for minimum payload carrying capacity of 24 passenger/ 1632 kg serving different floors as per specifications as under:-
-
-
-
Location of Lift : MLCP BLOCK
-
-
-
Speed: 1.5 meter per second (MPS)
-
-
-
Floor: Basement + Ground Floor + 7th Upper Floors + Terrace
-
-
-
Travel: 37.65 mtrs. (Basement + Ground Floor + 7th Upper Floors + Terrace)
-
-
-
Stops & Opening: 10 Nos.
-
-
-
Operation: Microprocessor Based Duplex Selective Collective Control with/ without Attendant.
-
-
-
Automatic rescue device complete with dry maintenance free batteries as required.
-
-
-
Controller: A.C. Variable Voltage Variable Frequency (ACVVVF)
-
-
-
Power: 400/415 Volts (3 Phase AC)
-
-
-
Type of doors:
-
-
-
Car: 1300 mm (W) x 2500 mm (D), Power operated, centre opening horizontal sliding Stainless Steel Linen/ Hairline finish with Anti scratch finish.
-
-
-
Ceiling : Aluminium/ Alloy + Acrylic finish.
-
-
-
Landing doors: 1100 mm (W) x 2400 mm high C/O Stainless Steel Hairline finish.
-
-
-
A flat heavy duty handrail of suitable length as per Lift Car dimension but not less than 800mm long at 900mm above floor level to be fixed on all three sides of the lift car.
-
-
-
Voice announcement system in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the elevators.
-
-
-
Braille signage/button both inside and outside of car.
-
-
-
Fire man switch
-
-
-
Automatic self landing feature to bring elevator CAR with in 0 to + 3mm of landing floor regard less of load and direction of Travel.
-
-
-
Flooring: 20mm recess for Granite/ Marble Stone flooring.
-
-
-
Fans and Light motion sensor based to confirm to Griha 3.0 Norms.
-
-
-
Passenger Lift describe as above.
2
-
-
Car Lifts
-
-
-
Supply, Installation, Testing & Commissioning of Car Lift without machine room lift
-
-
-
having contract speed of 1 Meter per second serving different floors in the lift shaft
-
-
-
of size 6550x4010 as per detailed specifications and as under complete with all the
-
-
-
equipment and accessories.
-
-
-
i) Speed - 1.5Meter per second
-
-
-
ii) Floors - Ground+7th Floor
-
-
-
iii) Travel - 28 Meter (approx.)
-
-
-
iv) Stop & Opening - 8 Stop & 8 Opening (all opening be on same side)
-
-
-
v) Controller- A.C. variable voltage and variable frequency.
-
-
-
vi) Automatic Rescue Device (ARD) compete with dry maintenance free batteries as
-
-
-
required.
-
-
-
vii) Operation - Microprocessor based duplex collective selective - (with/without -
-
-
-
attendant)
-
-
-
viii) Power: 415 Volts+10%, 3 Phase 4 wire 50 Hz AC system.
-
-
-
ix) Car Enclosure: Stainless steel scratch proof (Moon Rock/ Honeycomb/ Hairline
-
-
-
Finish) on all sides.
-
-
-
x) Type of Doors:
-
-
-
a) Car: Power operated, central opening, horizontal sliding stainless steel scratch
-
-
-
proof (Moon Rock/ Honeycomb/ Hairline Finish)
-
-
-
b) Landing doors: Power operated, central opening, horizontal sliding Stainless steel
-
-
-
scratch proof of approved shade.
-
-
-
xi) A hand rail not less than 600mm long at 900mm above floor level to be fixed
-
-
-
adjacent to control panel in the lift car.
-
-
-
xii) Voice announcement system in the car to announce the position of the elevator in
-
-
-
the hoist way as the car passes or stops at floor served by the elevator.
-
-
-
xiii) a) Combined luminous Hall Button and Digital Hall position indicator.
-
-
-
b) Battery operated Alarm Bell and Emergency Light
-
-
-
c) Firemen Switch
-
-
-
d) Infra- red Door Curtain - Full screen.
-
-
-
e) Integral full height car operating panel with luminous buttons with additional
-
-
-
brail inscriptions, Digital car position indicator with Direction arrows, with overload
-
-
-
warning indicator.
-
-
-
xiv) Flooring: Decorative flooring as per manufacturer's standards.
-
-
-
xv) Ceiling: SS ceiling with LED lamp and fan.
-
-
-
xvi) Dome camera for surveillance
-
-
-
Car Lift Describe as above
2
-
-
PART-VIII PARKING MANAGEMENT SYSTEM
-
-
-
Sub hed -I Supply, Installation, Testing, Commissioning of - Smart Parking Managemnt solution
-
-
-
Supply Installation Testing Commissioning of- Outdoor type electromechanical Boom Barrier • Barrier Gate Up to 3 Mtr (1 Sec) Electronic control board and power supply
• Corrosion resistant cabinet MS Powder coating • Opening/closing Time 1 sec
• 100% Duty Cycle
• MTBF -10 million Life Cycle • Manual release • With following specifications. • Machine core with compression spring, effectively avoids the accidents caused by spring breaking • Die-casting aluminium alloy motor, precision and good at thermal radiating • Motor cooling fan, solving the problem of heat-protection • Double safety limit switches (photo electricity limit switch/motor memory sensor) • Reversing on obstacle • Auto-closing • Support the externa INFRARER PHTOCELL for anti-bumping and human safety function (Optional)
• Support the external and internal VEHICLE LOOP DETECTOR (Optional)
• Traffic light interface • Wire control (switch signal)/ Remote control (418MHZ) 12. RS485 communication module (optional) • Running Time 1 Sec
• Max Boom Length 3 Meters, Boom Type (Straight Telescopic)
• Boom Dimension 45*80 MM (octagonal) • Motor Torque 600 NM • Duty Cycle 100% • Voltage 220V -/+ 10%, 110V -/+ 10% • Frequency 50/60 HZ • Motor Voltage 220 V • Power 100 W • Working Temperature 0 C to 65 C • Protection Grade IP 54 • Corrosion resistance Cabinet • With Push Button and all required accessorise Approved make- Parknsecure/impark/Swarco/Parkilio
6
-
-
Supply Installation Testing Commissioning of- EPC enabled READER for four wheeler with Protocol ISO 18000-6B, EPC Class 1 Gen2 (ISO18000-6C) • Protection Grade IP 66 (Ideal For Application In Harsh Environment) • Work Frequency Standard ISM 865-868MHz (Europe), 902~928MHz (USA) • 865-867MHz (India) • Frequency Hopping FH S OR Fixed Frequency Transmission (Supports RSSI) • Power Output 0 – 30 dBm (adjustable) • Antenna Built-in 9dBi Circular Antenna • Interface Rs232, RS485, Wiegand 26/34 ( TCP/IP & Wi-Fi)
• External Antenna One External Antennae Port. (Optional) • Module IMPINJ R2000 Module • Relay 2 Nos Built-In Relays • Operating Mode Answer, Active, Trigger • Read Range 12– 15m. • Write Range 0 – 6m • Reading Clue Buzzer / LED • Input Power 100-240V, DC 9V – 24V POE (Power Over Ethernet) • Power Consumption 4.5W • Operation Temp -25°C ~ +60°C • Storage Temp -25°C ~ +80°C • Humidity 10 – 95 % C
Approved make- Parknsecure/impark/Swarco/Parkilio
4
-
-
Supply Installation Testing Commissioning of- ANPR- Integrated design, IP67 with long range access ANPR camera & with inbuilt OCR AI for four Wheeler only, with VAM Software with ANPR software licence each lane-Designed to cater to the needs of facilities where parking is allocated to Authorized vehicles or detect visitor number plate • Integrated with entrance automation, equipment such as Boom Barriers
• ACS Controllers, Readers • ANPR, LD, Reader etc. Designed with high-performance CMOS image sensor and independently-developed processor, capable of reading and extracting detailed vehicle information day and night. Intelligent deep learning algorithm allows recognition of vehicle license plate, and vehicle brand, model, logo, and colour. The camera is extensively applied to vehicle capture and recognition of community road, parking lot, and other entrance and exit surveillance scenarios. • High-quality image Industry-specific GS-CMOS image sensor with high sensitivity, high SNR and excellent WDR provides lifelike images in all weathers • Complete intelligence High-performance CPU processor helps extract and analyse information of motor and non-motor vehicles in real-time, providing vehicle feature details for business decision-making. • High-level protection Integrated design with low power consumption, built-in lightning protection module, and IP67 protection grade, suitable for various harsh environments. • GS-CMOS image sensor · • Video compression standards: H.265/H.264M/H.264H/H.264B/MJPEG • Multiple ports various signal, data and communication ports, capable of connecting to external devices such as barrier. • Easy installation Built-in LED illuminator and motorized vari-focal lens, providing ease of installation and commissioning • Technical Specification:- Illuminator 6 white light illuminators (brightness adjustable) • Image Sensor 1/1.8'' CMOS • Image Resolution 1920 × 1080 (OSD black strip excluded) • Video Resolution Main stream: 1080P (1920 × 1080) / 720P (1280 × 720) Sub stream: 720P (1280 × 720) / D1 (704 × 576, 704 × 480) / CIF (352 × 288, 352 × 240) • Video Frame Rate PAL: Main stream (1280 × 960@25fps, 1280 × 720@25fps), sub stream: (1280 × 720@25fps, 704 × 576@25fps, 352 × 288@25fps) NTSC: Main stream (1280 × 960@30fps, 1280 × 720@30fps), sub stream (1280 × 720@30fps, 704 × 408@30fps, 352 × 240@30fps) • Bit Rate H.264B: 20Kbps–32768Kbps H.264M: 20Kbps–32768Kbps H.264H: 20Kbps–32768Kbps H.265: 20Kbps–32768Kbps MJPEG: 59Kbps–65536Kbps • Video Encoding H.264B/H.264M/H.264H/H.265/MJPEG • Image Encoding JPEG • Noise Reduction 3DNR • White Balance Full auto; auto colour temperature range; customized colour temperature • Electronic Shutter 1/50–1/10000, auto or manual • Wide Dynamic Range 96db • Edge Enhancement Yes • Exposure Mode Full auto; customized auto; customized • Iris Auto iris (W:1.3–T:2.3) • Function: Trigger Mode Video detection; I/O coil; video detection and I/O coil • Shutter Single shutter • Storage 1 built-in TF card port. Kingston 16G, 32G and 64G; 16G, 32G and 64G; SanDisk 16G, 32G and 64G • Image Tampering Prevention Yes. Video/picture can be checked through watermark and verification • Max Illumination Distance 25m (82.02ft) • Alarm Event Alarm in the case of no storage card, not enough storage space, storage card error, network disconnection, IP conflict, and illegal access • Security Mode Authorized username and password, MAC address binding, HTTPS encryption, IEEE 802.1x, and network access control • OSD Overlay Supports overlay of time, address (position of channel), lane(number/ direction), plate (number and colour), vehicle (speed, colour, type) • ANR (Automatic Network Replenishment) Yes. Platform/FTP • Auto Register Yes • Intelligence- Vehicle Detection Vehicle capture rate ≥99% • Vehicle Recognition Supports recognizing vehicle type, vehicle logo, vehicle colour, license plate, and vehicle without plate. Vehicle recognition rate ≥90% • Video Metadata- Intelligent Track Frame Intelligent frame display. Supports displaying vehicle plate and vehicle path • Ports:- Module lens • 1 Analog Output - 1 Ethernet Port 1 100/1000M Ethernet port (RJ45) • 1 RS-485 port • 2 I/O Port opt coupler input (switch quantity) • Alarm Input 1, opt coupler input (switch quantity) • Alarm Output 2-channel relay output, connecting to devices such as barrier • Audio Input 1-channel RCA port • Audio Output 1-channel RCA port • Power Output 12V DC±10% voltage output, ≤1A current output • General: Power Supply 12V DC, 24V AC, PoE • Power Consumption 20W • Working Temperature −30°C to +65°C (−22°F to +149 °F) • Working Humidity 10%–90% (no condensation) • Housing Metal and plastic • Protection Grade IP67
4
-
-
Supply Installation Testing Commissioning of- PCB Based VAM controller, 64-Bit Soc @ 1.4Ghz processor or Fanless 5th generation Intel® Core i3 up to 2.7GHz Dual-Core Four-Thread processor or 26 bit Wiegand controller with On board Memory with Polycarbonate or MS Enclosure and PSU and relay board
2
-
-
Supply Installation Testing Commissioning of-LD- Loop Detector -Output Configuration: 1 output relay per channel (fail safe in Presence mode or fail secure as optional model) • Pulse output: Approx. 150ms duration (Factory option 250ms) • Presence Time: Selectable – limited or permanent presence. (Limited-presence 1 hour for 3% ΔL/L) • Output modes: Presence or pulse outputs are independently selectable for CH 1 and CH2 • Direction logic output – A to B (CH1) & B to A (CH2) pulse or presence outputs available.
• Indications: The face-plate indications are a single power LED plus individual channel LED’s • Tuning-on (flashed) or slow flash in A/B logic mode • Undetected – LED off. • Detect – LED on steady • Fault – on with short off pulse (manual reset required to restore) • Protection: Loop isolation transformer, zener diode clamping on loop inputs and gas discharge tube protection • Power requirements: • 240V AC ± 15% 48-60Hz (PD232) • 12-24V AC/DC ± 15% (PD234) • 1.5VA max @ 230V • Presence Output Relay: 5A @ 230V AC – Normally Open (fail-safe in presence mode) and Normally Closed is available as an option • Operating temperature range: -40ºC to +70ºC • Material: High heat ABS blend
6
-
-
Supply Installation Testing Commissioning of- MS Pole with branding BOX and L arm
4
-
-
Supply Installation Testing Commissioning of- Status LED display Alpha numeric 2x1 p10 module Parking availability display board
Led Colour Red
Led Type Oval Outdoor water proof
Led Pitch 10 mm vertical 10 mm Horizontal
Character Height each line 6 inch in each line visible from 100 ft
Language English / Numeric
Message Changing By wired Lan connectivity
Power supply 230vac +-10% 50 Hz • Communication –Serial port/ TCP-IP/ LAN
220V AC ± 15% Operating temperature range: -10ºC to +70ºC
Material: High heat ABS blend
MS PU Body with mounting clamp
4
-
-
Supply Installation Testing Commissioning of Server withProcessor- Up to one Intel® Xeon® E 2224G with up to 4 cores per processor
• Memory: IMM Speed Up to 2666 MT/s, Memory Type UDIMM, Memory Module Slots-4 DDR4 slots, Maximum RAM-UDIMM 16GB
• Storage-Front Bays-One 3.5"" 1TB SATA SSD by default; up to 3 x 3.5"" SATA HDDs
• Storage Controllers-Software RAID Intel® VROC 6.x
• Security-Cryptographically signed firmware, Secure Boot, Intel® SGX (Software Guard Extensions), TPM 2.0
• Management: Embedded / At-the-Server, Intel AMT 12.0
• Power Supplies-Bronze 300W
• Ports: Network options:1 x 1GbE
• Front ports:2 x USB 2.0, 1 x USB 3.1, 1 x USB 3.1
• Rear ports: 2 x PS2, 2 x Display ports, 1 x Serial,1 x Audio, 2 x USB 2.0, 4 x USB 3.1
• Slots-PCIe, 1 X Gen3 slot (x16), 2 X Gen3 slot (x4), 1 X PCI
• Form Factor: Mini tower
• Win Server 2019 "
1
-
-
Supply Installation Testing Commissioning of Hand held POS Device with PMS POS app, Connectivity Wi-Fi & 4G
5 Inch colour Display
Multiple Communications
High speed Thermal printer Contactless/ NFC
Quad- core Cortex A7 processor
Smart Droid based on Android
Memory 1GB ROM, 8 GB ROM
Display 5.0-inch colour display, 1280x720 pixels resolution
2 Mp Rear Camera with Flash 2 inch high speed thermal printer , paper roll: 58mmX40mm
Contactless card reader
1x Sim + 2 x SAM card slots
Communications: 4G/5G/ Bluetooth/ BLE/Wi-Fi
Speaker for Audio
Battery: 7.4 V 2000 mAh, rechargeable Li-ion battery
Adopter: input 100-240V AC , 50/60 Hz: output : 5.0V DC, 2.0A
1x Micro USB2.0, 1x DC Jack, 1x Micro-SD Peripheral Ports
Charging Base: 1x DC 3.5mm Port (POGO), 1x LED Power indicator
.Multi-Function Docking Base- Scanner window, 2x type- A HOST USB 2.0, 1x RJ45 (Serial port), 1x RJ45 (LAN), 1x DC 3.5mm port (POGO), 1x led indicator, 1x LED communicator indicator (SIM and Subscription in client scope)
Hand Held Machines applications should have option to collect tariff fee through Cash, UPI, CC,DC
with Complete in all respect with all required accessories- The job includes the cost of all the petty material etc. With 1 years onsite warranty
2
-
-
Supply Installation Testing Commissioning of Handheld Fastag RFID Reader with Fastag PMS POS App , FasTag- Handheld for Fastag payment- Fastag RFID Reader with Android rugged mobile computer with powerful processor, 8000mAh battery and superb UHF Fastag RFID Reader. Equipped with Impinj Indy R2000, linearly or circularly polarized antenna. It can read FasTag from long distance
.Android 8.1 Operating System or Android 11.0 Operating System
Android 8.1; Soti Mobi Control, SafeUEM supported
CPU Cortex-A53 2.5 GHz Octa-core
RAM+ROM 3 GB + 32 GB
Expansion Supports up to 128 GB Micro SD card
WLAN IEEE802.11 a/b/g/n/ac, 2.4G/5G dual-band, internal antenna
Bluetooth v2.1+EDR, 3.0+HS, v4.1+HS
GNSS GPS/AGPS, GLONASS, BeiDou; internal antenna
WWAN 2G: 850/900/1800/1900 MHz 3G: B1,B2,B4,B5,B8 4G: B1,B2,B3,B4,B5,B7,B8,B12,B17,B20,B25,B40,B66
Dimensions 164.2 x 80.0 x 24.3 mm / 6.46 x 3.15 x 0.96 in.
Weight 654 g / 23.07 oz
Display 5.2'' IPS FHD 1920 x 1080
Touch Panel Corning Gorilla Glass, multi-touch panel, gloves and wet hands supported
Power Li-ion, rechargeable, 8000 mAh Standby: over 500 hours Continuous use: over 12 hours (depending on user environment) Charging time: 3-4 hours (with standard adaptor and USB cable) • Expansion Slot 1 slot for SIM card, 1 slot for SIM or TF card
Interfaces USB 2.0 Type-C, OTG, Type-C headphones supported • Audio Speaker, 2 microphones • Keypad 4 front keys, 1 power key, 2 scan keys, 1 multifunctional key • Sensors Gravity sensor, light sensor, proximity sensor
User Environment Operating Temp. -4 o F to 122 o F / -20 o C to 50 o C • Storage Temp. -40 o F to 158 o F / -40 o C to 70 o C
Humidity 5% RH - 95% RH non condensing
Drop Specification Multiple 1.5 m / 4.9 ft. drops (at least 20 times) to the concrete across the operating temperature range
Tumble Specification 1000 x 0.5 m / 1.64 ft. falls at room temperature
Sealing IP65 per IEC sealing specifications
ESD ±15 KV air discharge, ±6 KV conductive discharge
Camera 13 MP Autofocus with flas
Frequency 865-868 MHz / 920-925 MHz / 902-928 MHz
Protocol EPC C1 GEN2 / ISO18000-6C
Antenna Circular polarization (4dBi), linear polarization(1.8dBi) Power 1 W (30 dBm, +5 dBm to +30 dBm adjustable) 2 W
R/W range Up to 15 m (circular polarization, open outdoors, Impinj MR6 tag); up to 7 m (linear polarization, open outdoors)
Fastest Read Rate 900+ tags/sec (circular polarization)• Barcode Scanning (Optional)
NFC Frequency 13.56 MHz Protocol ISO14443A/B, ISO15693, NFC-IP1, NFC-IP2, etc. Chips M1 card (S50, S70), CPU card, NFC tags, etc. Range 2-4 cm
Accessories Standard AC Adaptor, USB Cable, etc. Optional Cradle, Holster, etc.
with Complete in all respect with all required accessories- The job includes the cost of all the petty material etc. With 1 years onsite warranty
1
-
-
Supply Installation Testing Commissioning of- Touchless Ticket Dispenser TVM Should be Touchless ticketing system along with an inbuilt QR reader, RF Proximity reader, Push button, Touchless hand wave button, DIC, and SOS (VOIP Optional) and with a 7” display and indicator LED. with an inbuilt controller, router, and power supply with a side opening, also it can be integrated with PMS application through Push/Pull data technology Robust and efficient ticket dispensing mechanism
centralized control and processing of all car park-related transactions Maintenance of accounting and administration protocols Revenue control functions that prevent attempts of customer and staff theft or leakage from the system Revenue and Yield Management functions to analyze trends and create financial reports – resulting in a greater revenue return to our clients Management of operational procedures such as staff attendance and daily reports Modular reporting format to suit the owner’s needs and return meaningful tailored information Management and tracking of car park records – simplifying end-of-day/ month reporting
Ticket format -Digit-coded serial numbers 16-24 digits (Alphanumeric) It can print predefined content with Date, Time, Vehicle No (Through ANPR) Lane No, Plaza ID, project Name, QR Code, 1D/2D Barcode. Configurable content available with software
Dispensing & Access Method-Touchless with Hand wave, Push Button, Proximity Card, QR Code and TFT
Control Program -Python, C#, Dot Net
Printer-Printing Method – Direct Line Thermal
Printing Speed – 160 mm/sec max
Resolution – 203 dpi
Number Dots a align – 448 Dots
Paper width – 60 mm
Auto Cutter – Guillotine type
Sensor – Yes
Cutter - Yes
Ticketing Speed -25 tickets/min (Depending upon the other parking system speed)
Ticket Dispensing capacity -Up to 4000 (Depending up on GSM of paper)
Type of Ticket-70-150 GSM
Ticket Length/Width-Width 60 mm, Length can be adjustable Display-18 cm, 7” LCD (Capacitive Touchscreen –optional) Res. – 800 x 480
Display interface – HDMI, USB.
Backlight control to lower power consumption
Touchless Switch- No Touch sensor diffused detection with non-touch infrared sensor and with 2 LED colours.
Free from contagious disease spread
2 LED indicators for sensor stand-by or approached sensor Detection range – 0.1-10 cm
Out contact – NO/NC/COM
Push Button (Secondary Ticket vending option)- Out contact – NO/NC/COM
Barcode/QR Reader-Barcode/QR Reader with 1D/2D reading capacity.
With features CMOS sensor, Infrared sensor, Visual feedback, and Dual interface.
Image Sensor – 800 x 800 COMS, Illumination – White LED
Depth of field – EAN 13: 0-190 mm
Depth of field Code 39: 40-210mm
Depth of field Code 128: 0-185mm
Depth of field QR: 0-130mm
Min Print Contrast: 25%
Scan Angle roll: 360°
Scan Angle Pitch: +- 40
Scan Angle Skew: +- 40
Field of view Horizontal: 74°
Field of view Vertical: 74°
Scan Modes: Sense Mode, Continuous Mode
Scan Window: 50mm x 50mm
1D: All major 1D and 2D symbologies, including PDF 417, data matrix, QR code, micro QR code, etc.
Interface: RS 232 USB
Notification: Beep, LED indicator
DIC (Optional)-Driver Image Capturing: 2MP camera SOS (Optional)-VoIP SIP module intercom with forward speaker, input call button
Video Intercom (Optional)
2MP camera with noise separation Low Illumination with IR supplement, true WDR communication port TCP/IP.
Trigger IO based
FOV: Horizontal - 130°, Vertical – 78°
Resolution: 1920 x 1080 p
Proximity Reader-Proximity Card Reader
Frequency:125KHz, ASK
Output Interface: Wiegand 26 Bits, Clock-and-Data
Read Range: Up to 5cm
Support: Tags
EM4100, TK4100, JH4101, EM4101
Configuration: CSN
Control Panel-Relay circuitry up to 16 relays can be sugar cube)
Opto Driven Digital Isolated inputs 12
Third-Party Wifi Router Placement on the PCB
Indicator LED with Pull up down resistors 3 no’s
Onboard AC input with output to drive to SMPS via a rocker switch
Onboard provision to accept 12 v and 5 v dc from SMPS
Onboard 9 v regulator for the reader's power
Input and output terminals are using RMC connector
Power Inputs and outputs are with terminal blocks with a pitch of 5 mm
Processor-Processor: 1.4GHz 64-bit quad-core processor or Intel chipset industrial PC
Dual-band wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and Power-over-Ethernet support Broadcom BCM2837B0, Cortex-A53 64-bit SoC @ 1.4GHz
Memory: 1GB LPDDR2 SDRAM
Connectivity: 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2, BLE Gigabit Ethernet over USB 2.0 (maximum throughput 300Mbps) 4 × USB 2.0 ports
Access: Extended 40-pin GPIO header
Video & sound: 1 × full size HDMI MIPI DSI display port MIPI CSI camera port 4 pole stereo output and composite video port Multimedia: H.264, MPEG-4 decode (1080p30); H.264 encode (1080p30); OpenGL ES 1.1, 2.0 graphics SD card support: Micro SD format for loading operating system and data storage
Input power: 5V/2.5A DC via micro USB connector 5V DC
Vehicle Detection-Through a presence loop or photo sensor to trigger the system, The ticket can be issued by waving hand over the Touchless button or by Pushing the button
Protection -IP54 (For outdoor use shade recommended)
Temperature: -10°C to 50 °C Humidity: Control through inbuilt Fan
Dimensions-W 457 x H 1538 x D 466
Electrical Protection-Yes with circuit breaker
Housing-Powder quoted CR Sheet, Colour – Light grey with Dark Grey front
Maintenance & Paper Loading-Left side opening with lock
Integration-Boom Barrier, External Controller, ANPR, etc.
Duty Cycle-100%
Power Supply -220-240 +/- 10% VAC, 50 Hz
Connectivity-TCP/IP, LAN
Offline Operation-Yes (But data need to push at the server end once get LAN connection is restored for reporting purpose)
Remote Access-Yes Dispensing Program-Yes, Prebuilt as well as per site requirement
Temperature-0°C - 55°C
Storage-20°C -75°C
Humidity- 90% RH
Language-English or On demand
Country of Origin-India
Certificates-CE, FCC, ISO
with Complete in all respect with all required software modules- The job includes the cost of all the petty material etc. With 1 years onsite warranty
1
-
-
Supply Installation Testing Commissioning of- Manned Point of Sale Including POS kiosk with 19" display ,Fanless Industrial grade CPU with Integrated 5th generation Intel® Core i3 up to 2.7GHz Dual-Core Four-Thread processor with 2 GbE LAN, Thermal printer , QR reader, User fare display, Custom Keyboard, Mouse, Electric Drawer with POS and Barrier Integration. Cashier Terminal for payment on foot or from vehicle at exit or at any central location. It can process all types of transactions and accept all means of payment. It should also allow printing of all types of QR tickets. Manages all types of transactions: Hourly parking: payment for regular or lost ticket. Pass-cards: payment for subscriptions and renewals, parking overstay payment. Conference and event tickets: sale, parking overstay payment. Sale of vouchers and prepaid cards (in time or money, usable at entry/exit or as means of payment). Various payment methods: cash, prepaid cards, credit and debit cards, UPI. The Cashier Terminal should includes the following features: (Porta Cabin in client scope)
Barcode/QR Reader-Barcode/QR Reader with 1D/2D reading capacity.
With features CMOS sensor, Infrared sensor, Visual feedback, and Dual interface.
Image Sensor – 800 x 800 COMS, Illumination – White LED
Depth of field – EAN 13: 0-190 mm
Depth of field Code 39: 40-210mm
Depth of field Code 128: 0-185mm
Depth of field QR: 0-130mm
Min Print Contrast: 25%
Scan Angle roll: 360°
Scan Angle Pitch: +- 40
Scan Angle Skew: +- 40
Field of view Horizontal: 74°
Field of view Vertical: 74°
Scan Modes: Sense Mode, Continuous Mode
Scan Window: 50mm x 50mm
1D: All major 1D and 2D symbologies, including PDF 417, data matrix, QR code, micro QR code, etc.
Interface: RS 232 USB
Notification: Beep, LED indicator
Printer-Printing Method – Direct Line Thermal
Printing Speed – 160 mm/sec max
Resolution – 203 dpi
Number Dots a align – 448 Dots
Paper width – 60 mm
Auto Cutter – Guillotine type
Sensor – Yes
Cutter - Yes
Electrical Cash drawer
Customer fee and date/time display
Flat screen monitor 19"
Customized Keyboard, Mouse
Dynamic QR for UPI payments kiosk
Proximity Reader-Proximity Card Reader
Frequency:125KHz, ASK
Output Interface: Wiegand 26 Bits, Clock-and-Data
Read Range: Up to 5cm
Support: Tags
EM4100, TK4100, JH4101, EM4101
Configuration: CSN
Change facility should be available in cash drawer
Monthly Card Renewal, membership, pass
Reading & management of discount tickets
Receipt issue and Report generation
On line with central server
Processor-Processor: 1.4GHz 64-bit quad-core processor or Intel chipset industrial PC
Dual-band wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and Power-over-Ethernet support Broadcom BCM2837B0, Cortex-A53 64-bit SoC @ 1.4GHz
Memory: 1GB LPDDR2 SDRAM
Connectivity: 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2, BLE Gigabit Ethernet over USB 2.0 (maximum throughput 300Mbps) 4 × USB 2.0 ports
Access: Extended 40-pin GPIO header
Video & sound: 1 × full size HDMI MIPI DSI display port MIPI CSI camera port 4 pole stereo output and composite video port Multimedia: H.264, MPEG-4 decode (1080p30); H.264 encode (1080p30); OpenGL ES 1.1, 2.0 graphics SD card support: Micro SD format for loading operating system and data storage
Input power: 5V/2.5A DC via micro USB connector 5V DC
Connectivity-TCP/IP, LAN
Offline Operation-Yes (But data need to push at the server end once get LAN connection is restored for reporting purpose)
Remote Access-Yes Temperature-0°C - 55°C
Storage-20°C -75°C
Humidity- 90% RH
Language-English or On demand
Country of Origin-India
Certificates-CE, FCC, ISO
with Complete in all respect with all required software modules- The job includes the cost of all the petty material etc. With 1 years onsite warranty
2
-
-
Supply Installation Testing Commissioning of- Admin Software
SITC of PMS Admin & Client Software Web/Windows with integration with ANPR/Fastag/Valet parking Modules
• PMS Software with Easy Monitor: centralized remote monitoring tool, user friendly and comprehensive.
• Software with Configurable Graphical User Interface illustrating with real time status of all equipment with clear screen icon indication of equipment alarms or faults. AM Software with ANPR software licence each lane-Designed to cater to the needs of facilities where parking is allocated to Authorized & Commuter vehicles • Integrated with entrance automation, equipment such as Boom Barriers,
ACS Controllers, Readers • ANPR, LD, Reader, handheld, pgs display etc. (yearly Subscription)
· Functional Specification of Application Software for ANPR & DIC
· The system should automatically detected approaching vehicle at the installed location by means of Inductive loops/ IR Sensor.
· On detection of Vehicle approach, the system would active the license plate image capture cameras in real time
· The system shall perform OCR (Optical Character Recognition) of the License plate Character
· (English alpha Numeric characters in standard fonts)
· The system shall store image of Vehicle and license plate and enter the license plate number OCR into OEM specified database along with date timestamp and site location details.
· System should be able to detect and recognize the alpha numeric License plate in all standard font and formats of all type of vehicles
· The system should have option to identify license plates according to the Black/white listed categories by authorized personnel.
· Multitenant based Visitor management Module
· Technical Specification of Software for UHF/ FasTag RFID
· The application should be open platform to integrated with 3rd party UHF tags i.e., FASTag.
· The system should have option to identify FASTag number according to the highlighted vehicle list
The system should provide advanced and smart searching facility of FASTag number from the
· database. There should be an option of searching tag no almost matching with the specific number
· The applications should have report in the. XLX, .CSV, .XML & PDF format
· RFID reader process only 1 tag at specified lane no cross reading
· The application should have integration feature with access control reader for the manual transitions
· During the site visit Selected Party need to be proposed distance between tag and reader.
· If there is dust, moisture etc., or anything other than metal between the antenna and the RF tag, it should not affect transmission.
· Hand Held Machines applications should have option to collect tariff fee through Cash, UPI, CC/DC and FASTag
· Reports.
· User Login report (System wise, All Parking wise, and Date & Time wise, shift wise)
· Shift End Summary Report.
· Complete transactions reports with following filters:
a. Ticket wise b. FASTag
c. ANPR. d. User ID
e. Entry & exit wise.
f. MOP (mode of Payment) wise
g. Vehicle Category wise (Private, commercial, Green, VIP etc.)
h. Shift wise
i. Date & Time
j. Group/Fleet (active, non-active, trips, value) wise.
· 4. FASTag Transaction report as per bank format.
· 5. Violation report. (Lane wise, all parking wise, with Date & time filter).
· 6. ANPR report (Lane wise, All Parking wise, Date & Time wise) including offline.
· 7. User Report (Activate, De-activate All Parking wise, with Date & time filter)
· 8. Shift summary (current and logout user) report with their respective amount. With date & time filter.
· 9. Cashier / Supervisor ID wise collection report.
· 10. Vehicle length of stay. With date & time filter (Dynamic) short by stay duration in ascending- descending order with date and time filter.
· 11. All report should be extract / save in .pdf, .xlsx, .csv etc. Note: Auto mailing facilities of aforesaid/select reports from server to minimum 5 email ids.
· 12. All receipts formats are accordance to recommended format by GST Council.
Format:
Entry Ticket should have visible information as mentioned below.
• Company Name & Address with Site Name & T&C:
• CIN:
• GSTIN No.:
• HSN/SAC Code:
• Ticket Sequence No & QR / Barcode:
• In Date & Time with Lane No.:
• Vehicle No.:
• Terms & Condition (minimum 150 characters):
Payment Receipts should have below information.
• Invoice Cum Receipt No (Less than 16 digit and represent Site Name, Pay booth Name & Receipt Sequence No.)
• Company Name & Address with Site Name & T&C:
• CIN:
• GSTIN No.:
• HSN/SAC Code:
• Site Name:
• Pay booth No:
• Ticket Sequence No (Same on Entry Ticket):
• In Date & Time:
• Payment Date & Time:
• Stay Time:
• Parking Fee:
• CGST:
• SGST:
• Total Payment:
• Vehicle No:
On demand features
3rd party Visitor management Integration
BMS, ERP integration through API on demand
with Complete in all respect with all required software modules- The job includes the cost of all the petty material etc. With 1 years onsite warranty
1
-
-
Supply Installation Testing Commissioning of- Software for ANPR acknowledgement and validation with 97% accuracy
Functional Specification of Application Software for ANPR The system should automatically detected approaching vehicle at the installed location by means of Inductive loops/ IR Sensor.
On detection of Vehicle approach, the system would active the license plate image capture cameras in real time
The system shall perform OCR (Optical Character Recognition) of the License plate Character
(English alpha Numeric characters in standard fonts)
The system shall store image of Vehicle and license plate and enter the license plate number OCR into OEM specified database along with date timestamp and site location details.
System should be able to detect and recognize the alpha numeric License plate in all standard font and formats of all type of vehicles The system should have option to identify license plates according to the Black/white listed categories by authorized personnel.
Multitenant based Visitor management Module
Can classify Vehicle type through colour of number plate
CMOS image sensor and processor ALGORITHM for in-depth extraction and analysis of vehicle information 24/7
Embraces deep learning algorithm for accurate recognition of vehicles license plate, and vehicle model, vehicle logo, vehicle series, vehicle colour, and more with Complete in all respect with all required accessories- The job includes the cost of all the petty material etc. With 1 years onsite warranty
4
-
-
Supply Installation Testing Commissioning of- Software for Fastag acknowledgement and validation
Technical Specification of Software for UHF/ FasTag RFID
·The application should be open platform to integrated with 3rd party UHF tags i.e., FASTag.
The system should have option to identify FASTag number according to the highlighted vehicle list
The system should provide advanced and smart searching facility of FASTag number from the database.
There should be an option of searching tag no almost matching with the specific number
The applications should have transection report in the. XLX, .CSV, .XML & PDF format
·RFID reader process only 1 tag at specified lane no cross reading
The application should have integration feature with access control reader for the manual transitions During the site visit Selected Party need to be proposed distance between tag and reader.
with Complete in all respect with all required accessories- The job includes the cost of all the petty material etc. With 1 years onsite warranty
4
-
-
One Time Charges for fast tag system integrations with NETC & NPCI which include One Time Charges For fast Tag System Integrations with NETC & NPCI (National Payments Corporation of India) which includes facility like- Real time transaction processing.
Customers can link their FASTag to their existing savings /current account/Credit Card or to a prepaid account. For opening a prepaid account it is not mandatory to have an existing relationship with the issuer bank
FASTag facilitates electronic payments at the parking plaza while the vehicle is in motion. An instant SMS notification of the transaction sent to the customer.
Customer can recharge FASTag account online through issuing member banks portal using UPI/ Card/ NEFT/ RTGS /Net Banking OR BBPS. And fast tag databased access licence and integration with NECT &NCPI (MDR @3%+GST extra and deducted from each transection by BNAK/ NPCI/ Service provider
1
-
-
Supply Installation Testing Commissioning of Road Speed Breaker
6
-
-
1 GBPS internet cooncetion monthly basis
1
-
-
Parking Information System
-
-
-
Supply Installation Testing Commissioning of PIS Server withProcessor- Up to one Intel® Xeon® E 2224G with up to 4 cores per processor
• Memory: IMM Speed Up to 2666 MT/s, Memory Type UDIMM, Memory Module Slots-4 DDR4 slots, Maximum RAM-UDIMM 16GB
• Storage-Front Bays-One 3.5"" 1TB SATA SSD by default; up to 3 x 3.5"" SATA HDDs
• Storage Controllers-Software RAID Intel® VROC 6.x
• Security-Cryptographically signed firmware, Secure Boot, Intel® SGX (Software Guard Extensions), TPM 2.0
• Management: Embedded / At-the-Server, Intel AMT 12.0
• Power Supplies-Bronze 300W
• Ports: Network options:1 x 1GbE
• Front ports:2 x USB 2.0, 1 x USB 3.1, 1 x USB 3.1
• Rear ports: 2 x PS2, 2 x Display ports, 1 x Serial,1 x Audio, 2 x USB 2.0, 4 x USB 3.1
• Slots-PCIe, 1 X Gen3 slot (x16), 2 X Gen3 slot (x4), 1 X PCI
• Form Factor: Mini tower
• Win Server 2019
1
-
-
Supply Installation Testing Commissioning of- PIS Software with Software application interface like A program menu allows easy access to all function pages To manage, and monitor the Parking Information system via a graphic interface of the entire parking facility layout
1
-
-
Supply Installation Testing Commissioning of- 1 Row 4 Digit Dis play Red P10 module (TCP-IP/RS485) (indoor with roof hanging mount) ❑ Work Temp: -10° C – 55° C
❑ Multi- Color LED Matrix Display unit
❑ Voltage rating: 230 Vac, 50 Hz
❑ Currentrating: 1A, 5A
❑ Communication frequency: 9600
❑ Luminance: 1000cd/m2
❑ Dot matrix: 320x 120 mm ❑ LED Color: R/G/B Super bright.
❑ Communication: RS232/RS485/TCP/IPOptional
❑ Frequency: 50 – 60 Hz
❑ Cabinet Color : Black
❑ Visibility-40-50 Mtr
❑ Baud: 4800 bps/9600
❑ Customize as persite requirement
7
-
-
Supply Installation Testing Commissioning of- Main Outdoor display at entry Gate with 7X1 P10 module RGB Main Display (Outdoor at main Gate with Pole mount) Multi Row InformationDisplay
❑ Work Temp: -10° C – 55° C
❑ Multi- Color LED Matrix Display unit
❑ Voltage rating: 230 Vac, 50 Hz
❑ Currentrating: 1A, 5A
❑ Communication frequency: 9600
❑ Luminance: 1000cd/m2
❑ Dot matrix: 320x 120 mm ❑ LED Color: R/G/B Super bright.
❑ Communication: RS232/RS485/TCP/IPOptional
❑ Frequency: 50 – 60 Hz
❑ Cabinet Color : Black
❑ Visibility-40-50 Mtr
❑ Baud: 4800 bps/9600
❑ Customize as persite requirement
2
-
-
Supply Installation Testing Commissioning of- Vehicle Detection Module-Output configurations with 2 output relays and 2 channels, featuring fail-safe in Presence mode or optional fail-secure models. It provides pulse outputs with approximately 150ms duration, adjustable Presence Time for limited or permanent presence, and independently selectable output modes for each channel. Direction logic outputs enable pulse or presence outputs for A to B and B to A directions. The faceplate includes a power LED and individual channel LEDs for clear indications, including Tuning-on (flashed) or slow flash in A/B logic mode, steady LED for detection, and fault indication with a short off pulse, requiring manual reset. The detector ensures protection with a loop isolation transformer, zener diode clamping on loop inputs, and gas discharge tube protection. It operates with either 240V AC ± 15% or 12-24V AC/DC ± 15% power requirements and offers a presence output relay with 5A @ 230V AC capacity, normally open in fail-safe mode, with a normally closed option available. Its rugged construction using high heat ABS blend material ensures reliable performance across a wide operating temperature range from -40ºC to +70ºC.
❑ . Power requirements 240V AC ± 15% 48-60Hz (PD232)
❑ Presence Output Relay: 5A @ 230V AC – Normally Open (fail-safe in presence mode) and Normally Closed is available as an option
❑ Operating temperature range: -40ºC to +70ºC
❑ Material: High heat ABS blend- Write it in a paragraph and 5 points
28
-
-
Supply Installation Testing Commissioning of- Counting Controller- Parking Counting Controller with 4 Relay/4DI Modbus/SNMP/MQTT Ethernet Remote I/O is a versatile device designed for efficient and remote management of parking systems. Equipped with 6 channels of relay output and 2 channels of digital input (counter), it enables seamless integration with various parking equipment and sensors.
❑ IMulti-Protocol Support: Supporting MQTT (TLS), SNMP, Modbus TCP, RESTful API, and ASCII protocols, it ensures compatibility with a wide range of existing network infrastructures and IoT platforms, facilitating seamless integration and communication.
❑ Advanced Logic Control: Featuring GCL (Graphical Control Language), it enables the creation and execution of basic logic control rules, allowing for customized automation and response actions based on specific parking scenarios or events.
❑ Peer-to-Peer Mapping: With its peer-to-peer function, the device can map I/O statuses between multiple controllers, facilitating synchronized operations and enhanced system redundancy in larger parking facilities.
❑ Robust Construction: Built to withstand harsh environmental conditions, the device offers an operating temperature range of -10 to55 °C (-40 to 158 °F) and boasts 2 isolation voltage, ensuring reliable performance in challenging outdoor environments.
14
-
-
Cable and conduit
-
-
-
Supply Installation Testing Commissioning of- CAT6 Twisted Pair A Cable
3000
-
-
Supply Installation Testing Commissioning of-3 core 1.5 Sqmm Power cable
3000
-
-
Supply Installation Testing Commissioning of- 25 mm MPVC Conduit-25mm PVC Heavy Duty
3000
-
-
Supply Installation Testing Commissioning of- OFC cable 6 core
750
-
-
Supply Installation Testing Commissioning of- 8 T+2SFP port Switch
8
-
-
Supply Installation Testing Commissioning of- LIU 6 port loaded
8
-
-
Supply Installation Testing Commissioning of-OFC Patch coard
8
-
-
Supply Installation Testing Commissioning of- Cat 6 patch cord
8
-
-
Supply Installation Testing Commissioning of- SFP 1G
8
-
-
Supply Installation Testing Commissioning of- 10 Sfp+4T port SFP L3 switch
1
-
-
Supply Installation Testing Commissioning of-LIU 12 port loaded
1
-
-
Supply Installation Testing Commissioning of-OFC Patch coard
6
-
-
Supply Installation Testing Commissioning of-Cat 6 patch cord
6
-
-
Supply Installation Testing Commissioning of-SFP 1G
8
-
-
Supply Installation Testing Commissioning of-Enclosure outdoor with Fan and PSU
8
-
-
Supply Installation Testing Commissioning of 32 U floor Mounted rack
32U FLOOR STANDING RACKS
Usable Height : 30 U
Actual Width / Usable Width : 600 mm / 19"
Actual Depth / Usable Depth: 800 mm / 425 mm(max)
Door : Rear steel door fitted on hinges
With locking arrangement and having opening at 140 degree.
Front : Glass Door fitted on hinges with locking arrangement
Material Used for Fabrication
CRCA steel sheet
Bend Test (3 times) 45
Thickness of Material
1.2 mm for Racks , 2mm for Vertical equipment angles
Powder Coating
Coat Thickness =80-90 Microns
Coating Shade-Cabinet=Light Grey
Steel Door/Glass trims=Light Grey/Dark Grey
Other Features
Fixed Side panels - 02 Nos
Top & Bottom cable entry provision at rear
Heavy duty Castors for easy movement - 01 set ( 2 with brakes and 02 without brakes)
19” wide adjustable mounting rails utilizing full width
Standards
Rack conforms to DIN 41494 & IEC 297 standard
1
-
-
SUB HEAD -II Parking Guidance System
-
-
-
Supply Installation Testing Commissioning of- PGS Software with Software application interface like A program menu allows easy access to all function pages To manage, and monitor the guidance system via a graphic interface of the entire parking facility layout
1
-
-
Supply Installation Testing Commissioning of- Directional LED Information Panel - Three digits to show available parking spaces and an arrow for direction. ❑ Brightness 2000 MCD
❑ Communication:RS232/RS485/TCP/IP/PGS
❑ Cabinet Color : Black
❑ Visibility 50 mtr
❑ LED Color: Red /Green Super bright.
❑ Display the empty parking spaces in the form of figure
and arrow,
❑ MS profile and organic glass panel casing
❑ Green indication and distinguishable.
❑ Lamp bead type 6-8 seconds SMD LED lamp bead
❑ Operating AC 110 ~ 240V
❑ Power ≤10W (one direction)
❑ Temperature -10°C ~ +55°C
❑ Humidity ≤90% RH
❑ Luminance 339 LUX
28
-
-
Supply Installation Testing Commissioning of-Ultrasonic Sensor With LED, Combi ultrasonic sensors and LED lamp indicators into one device. Each parking space requires one ultrasonic combi sensor LED installed in front of the parking space. (Red & Green Color By Default other Color on request)
❑ Detection Range adjustment 2.5 m to 3
❑ Installation location - Above front of the parking slot
❑ Horizontal – 1. 0~0.5m, Vertical- 2~3m ❑ Operating voltage - DC 10~28V (Rated 24V)
❑ Power consumption - 1W
❑ Working temperature -10°C ~ +55°C , humidity-up to 70%RH
❑ Appearancematerial- Grey ABS engineering plastics
❑ Communicationmode - RS485
❑ Communicationmode - 2 RJ45 ports
❑ Communication distance - ≤300m
❑ Power supply distance - ≤150m
❑ Response time of the detector-After parking - 2s~10s
❑ Type of the indicator light -Red and green two-tone high-light LED
❑ Ranging error- 2cm
❑ Detection accuracy - 99.9%
❑ Communication frequency: 9600
535
-
-
Supply Installation Testing Commissioning of- Zone controller - One Zone controller can connect up to 30 ultrasonic sensor LEDs. It gathers and forwards vacancy information from all the detectors to the Central Control Unit, and also forwards commands from the Central Control Unit to the LED information panels connected to it for displaying proper vacant information.
❑ Zone controller to receive data from 30 to 50 Sensor depending upon distance
❑ 32-bit ARM processor
❑ Remotely upgraded to always satisfy the user's requirements.
❑ CAN BUS communication interface
❑ Two-way RS485 communication interface
❑ Industrial design for strict tests of static, lightning stroke,surge and group pulse
❑ Devices is designed with the short circuit transposition and misconnection protection
❑ Working temperature -10°C~ +55°C
❑ Communicationmode 1-circuit CAN / 2-circuitRS485
❑ Casingmaterial-Mild Steel Powder Coated Black
❑ Communication distance CAN: ≤1000m (RVSP 2*1.0, RS485: ≤300m
❑ Single-circuit node capacity 15-25 Sensors and LED
❑ Power consumption ≤2W
10
-
-
Supply Installation Testing Commissioning of- Floor Control Unit - One parking floor requires one Floor Control Unit. . The Floor Control Unit gathers and forwards information from Zone Controllers to the Central parking guidance server for management operation. It can also provide vacancy information to additional level or area vacancy LED display boards connected. Controllers should use RS485/TCP/IP, Can BUS hybrid communicationmechanismto solve the Problem of long-distance communication, the expansion of network nodes, group managementissues.
❑ The Node/Floor Controller to collect all parking information in floor and uploading the related collected information code to the Central Controller. I It is used to connect Zone and
Central Controllers. BUS communicationmechanism
❑ 32-bit ARM processor
❑ Floor Controller can be remotely upgraded
❑ overvoltage protection
❑ Groupingmanagement of the Zone Controller
❑ Optimal management of network communication and complete protocol conversion and data grouping
processing between centralized and Zone Controllers.
❑ Casingmaterial Mild Steel Powder Coated Black
❑ Working temperature -10°C ~ +55°C
❑ Operating voltage AC 110 ~ 240V
❑ Communicationmode 2 CAN-BUS
❑ Communication distance ≤1000m (RVSP 2*1.0)
❑ Power consumption ≤100W
7
-
-
Supply Installation Testing Commissioning of- Central Control Unit -One parking facility requires one Central Control Unit. It can connect up to 15 floor Controllers at the maximum. The Central Control Unit gathers and forwards information from Floor Controllers to the PGS parking guidance server for
management operation. It can also provide vacancy information to additional level or area vacancy LED display boards connected. Controllers should use RS485/TCP/IP, Can BUS hybrid communicationmechanismto solve the Problem of long-distance communication, the expansion of network nodes, group managementissues.
❑ Floor Controller can be remotely upgraded
❑ overvoltage protection
❑ Optimal management of network communication andncomplete protocol conversion and data grouping
processing between centralized and Zone Controllers.
❑ Casingmaterial Mild Steel Powder Coated Black
❑ Working temperature -10°C ~ +55°C
❑ Operating voltage AC 110 ~ 240V
❑ Communicationmode 2 CAN-BUS
❑ Communication distance ≤1000m (RVSP 2*1.0)
❑ Power consumption ≤100W
1
-
-
Supply Installation Testing Commissioning of- 4 core 1 Sqmm Power cable
3210
-
-
Supply Installation Testing Commissioning of- 25 mm MS Conduit-25mm
3210
-
-
PART-C FURNITURE ESTIMATE
-
-
-
Sub Head-I Furniture MLCP
-
-
-
LOUNGE CHAIR - FEEDING ROOM
Cafe Chair Overall Size 480W x 490D x 780H . . Base Seat & Back Made Of Moulded PP Structure Supported ( Single Piece Moulded Seat & Back Shell ) . Understructure Base Of Chair Round SS Pipe Structure Fixed Type . Understructure Base Fixed Type 19mm Dia SS Round Pipe 1.2mm Thick . Machanism & PHA ( Gas Lift ) NA . Seat & Back Are Firmly Connected To The Base Frame . Chair Max Height 780 & Depth 490mm . 440W x 410D Base Seat Moulded With PP Structure & 440W x 390H Back Seat Moulded With PP Structure . Height From Seat To Ground 420mm . All SS Round Tube Pieces Shall Be Welded Properly Strongly and conformity with regulations . Legs Of The Chair Hard Rubber Shoes . Assembly Shell Affixed On MS Frame With Help Of Screw . The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for CAFE FURNITURE range for ergonomic design.
17
-
-
SINGLE SIZE BED-PIONEER - 03
Overall Size 1981L x 940W x 810H1 x 600H2 . Bed Used Upper Top 12mm Commercial Plyboard . Bed Made Of Prime Quality CRCA Rectangular , Square & Round Metal Pipe Powder Coated Finish With Approved Shade . Bed Main Leg Made Of 38mm Dia 1.2mm Thick Round Metal Pipe Duly Powder Coated . Main Structure Supported To 19mm Dia Round Metal Pipe 1.2mm Thick Powder Coated . Bed Two Side Supported 50x25 Metal Rectangular Pipe 1.2mm Thick Powder Coated . Other Two Side Supported To 40 x 20 Rectangular Metal Pipe 1.2mm Thick Powder Coated . Under Ply Supported To Be 25 x25 Square Metal Pipe 1.2mm Thick Powder Coated . 25 x 25 x 3mm Thick MS Angle Supported To Ply Board . Bed Structure Pipe 19mm Dia. Welded To 38mm Dia. Metal Round Pipe . No Sharp Edges Of Pipe Ends . Height From Ground To bed 450mm High . Legs Of The Bed Hard Rubber Shoes . All Metallic Panels Screw With Nut & Bolt . All Metal Pieces Shall Be Welded Properly Strongly and conformity with regulations . CO2 Welding Shall Be Used . All Metal Shall Be Coated After Being Treated With At Least Three Stages And Cleaned From Oil,Grease, Dust, And Other Dirt Using Special Thermal Control Coating For Metal Furniture To Form a Layer Of Base Coating Of (iron phosphating) (0.4 – 0.8) gm/m² . Automatic Spray Coating Shall Be Applied To Be Followed By a Drying Process In a Thermal Furnace With Suitable Temperature And Time For The Process . Thickness Of Coating (40 – 50) Micron. The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for hostel FURNITURE range for ergonomic design.
21
-
-
Table Type - 1 (3M X 0.09M)
Overall Size:-3000WX900DX750Hmm, Table Top 25+18mm Thick PLPB Board , All Wooden Panels Finish With 2mm PVC Edge banded , Top Supported Under structure Of Table Gable - End Made Of Prime Quality 18mm Thick PLPB Board , Modesty Panel Prime Quality 18mm Thick 600mm High PLPB Board Supported To Top, Top supported under Box design with three drawer pedestal on one side and on another side two number of sliding drawer , All Wooden Panels , Gables & Modesty Fix Joints With Minifix Dowels & Other Fitting Equipment , All Wooden Panels Prime Quality Board With ISI Marked.(Design as per reference image).
1
-
-
Table Type - 2 (3M X 0.09M)
Overall Size:-3000WX900DX750Hmm, Table Top 18+18mm Thick PLPB Board , All Wooden Panels Finish With 2mm PVC Edge banded , Top Supported Under structure Of Table Gable - End Made Of Prime Quality 25mm Thick PLPB Board , Modesty Panel Prime Quality 18mm Thick 600mm High PLPB Board Supported To Top, Side cabinet Top to be made up of 25mm thick PLPB with 2mm thick PVC edge bending ,Side cabinet below top with 2-number of drawer and one number of openable shutter , Side cabinet under structure made up of 18mm thick PLPB with PVC edge bending , Side cabinet back panel to be made up of 9mm thick PLPB , Skirting made up of 18mm thick PLPB with 2mm thick PVC edge bending, All Wooden Panels , Gables & Modesty Fix Joints With Minifix Dowels & Other Fitting Equipment , All Wooden Panels Prime Quality Board With ISI Marked.(Design as per reference image)
1
-
-
Table Type - 3 (2.3M X 075M)
Ebony main table (Size: L: 2300 x W: 750 x H: 770 mm) Tops are made of 45 mm effect with full compact half moon T molding with Melamine finish in Rosewood. Melamine finish provides water, heat & scratch resistant. Sides are made of 25 mm with full compact PVC edging with Melamine finish in Rosewood. Fronts are made of 25 mm with full compact PVC edging with Melamine finish in Rosewood. Melamine finish provides water, heat & scratch resistant. Metal Frame for side panel ensure strength & durability for aesthetics look. Adjustable leg for table ensure comforts and convenience . Grommet for desktop wire management to avoid cramped desks and messy wring. The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design.
2
-
-
Table Type - 4 (2M X 0.75M)
Ebony main table (Size: L: 2000 x W: 750 x H: 770 mm) Tops are made of 45 mm effect with full compact half moon T molding with Melamine finish in Rosewood. Melamine finish provides water, heat & scratch resistant. Sides are made of 25 mm with full compact PVC edging with Melamine finish in Rosewood. Fronts are made of 25 mm with full compact PVC edging with Melamine finish in Rosewood. Melamine finish provides water, heat & scratch resistant. Metal Frame for side panel ensure strength & durability for aesthetics look. Adjustable leg for table ensure comforts and convenience . Grommet for desktop wire management to avoid cramped desks and messy wring. The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design.
10
-
-
Table Type - 4 (1.8M X 0.75M)
Office Table Top 25mm Thick PLPB Board With 2mm Thick Pvc Edgebanded Finish With As Per Approved Laminate Shade . Riva SeriesTable Size 1800W x 750D x 750mm . Fixed Pedestal Size 400W x 450D x 640H . Side Storage Size 1050W x 500D x 700H . Table Top Supported Understructure Of Table Gable - End Made Of Prime Quality 18mm Thick PLPB Board , Fixed Drawer Top 18mm Thick Wooden Board With 0.8 mm Thick Edgebanded . Mobile Drawer Used Sliding Telescopic Channel With All Fittings & Shutter Used C - Frame Handles . Fixed Drawer Move On Twin Wheel Casters 50mm Dia . Casters Made Of Moulded Black Nylon Metal Bolt Inserted & Fitted . Side Storage Top 25mm Thick Top With 2mm Thick Edgebanded . 18mm Thick Wooden Shelve & Divider . Storage Front Facia 18mm Thick PLPB Sliding Shutter . 50mm High Wooden Panel Skirting Provided in Side Storage . 7mm High Pvc Bofurs Screw With Gable - end & Side Storage . All Wooden Panels Cleaning Corner Knitted Finish . All Wooden Panels , Gables & Modesty Fix Joints With Minifix Dowels & Other Fitting Equipment . All Wooden Panels Prime Quality Board With ISI Marked . The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design.
1
-
-
Office Table Top 25mm Thick Wooden Board With 2mm Thick Pvc Edgebanded Finish With As Per Approved Laminate Shade . Table Size 1800W x 900D x 750mm . Mobile Pedestal Size 400W x 450D x 640H . Side Storage Size 1050W x 500D x 700H . Table Top Supported Understructure Of Table Gable - End Made Of Prime Quality 18mm Thick PLPB Board. Mobile Drawer Top 18mm Thick Wooden Board With 0.8mm Thick Edgebanded One Side Ducknose Postform . Mobile Drawer Used Sliding Telescopic Channel With All Fittings & Shutter Used C - Frame Handles . Mobile Drawer Move On Twin Wheel Casters 50mm Dia . Casters Made Of Moulded Black Nylon Metal Bolt Inserted & Fitted . Side Storage Top 25mm Thick Ducknose 25 mm thick With 2mm Thick Edgebanded . 18mm Thick Wooden Shelve & Divider . Storage Front Facia 18mm Thick PLPB Sliding Shutter . 50mm High Wooden Panel Skirting Provided in Side Storage . 7mm High Pvc Bofurs Screw With Gable - end & Side Storage . All Wooden Panels Cleaning Corner Knitted Finish . All Wooden Panels , Gables & Modesty Fix Joints With Minifix Dowels & Other Fitting Equipment . All Wooden Panels Prime Quality Board With ISI Marked . The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design.
2
-
-
Table top made to the shape as per design and having overall size of 1400WX600DX70m , under structure made of 18mm thick plywood with 0.6mm Mica pated , modesty panel made of 25mm thick , Table fixed with bottom edge beading as per requirement , Modesty Panel of Main table shall be finished with matching veneer 3±4mm of approved grains and colour with design as per engineer in charge , Side pedestal Main Table shall be sliding drawers made of 12 mm ply sides and bottom , 18 mm front and within 18mm BB boxing etc complete , Drawers provided for Main table shall be fixed with sliding channels handles locks etc complete , All visible surfaces of side to be finished with PU polish All internal and underneath surfaces of table shall also be finished with PU polish , All edge beading nails screws adhesives etc complete , all wooden surfaces shall be finished with PU polish.
20
-
-
Table 900m dia 750mm ht. , 18mm thick PLPB Top, crome plated frame structure. Table Top 18 mm Thick PLPB Board With 2mm Pvc Edgebanded Finish With As Per Approved Laminate Shade . Understructure Made Of Prime Quality 1.6 mm Thick frame. Understructure round pipe of crome platedl, Pipe 50 x 50mm With 1.6 mm Thick All Metal Pieces Shall Be Welded Properly Strongly and conformity with regulations . The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design.
5
-
-
Table Top 25mm Thick PLPB Board ( OSL ) With 2mm Pvc Edgebanded Finish With As Per Approved Laminate Shade . All Over Size Of Table 2100W x 1000D x 750H . Understructure Made Of Prime Quality CRCA 50 x 50mm Square Metal Pipe Duly Powder Coated . Understructure CRCA Metal Pipe 50 X 50mm With 1.6 mm Thick Four Side Welded With Vertically Metal Pipe . Legs Of The Table Hard Rubber Shoes . Understructure CRCA Square Metal Pipe 50 x 50mm With 1.6 mm Thick All Side Welded With Vertically & Horizontally Metal Pipe powder coated All Metal Pieces Shall Be Welded Properly Strongly and conformity with regulations . CO2 Welding Shall Be Used . All Metal Shall Be Coated. After Being Treated With At Least Three Stages Cleaned From Oil,Grease, Dust, And Other Dirt Using Special Thermal Control Coating For metal Furniture To Form a Layer Of Base Coating Of (iron phosphating) (0.4 – 0.8) gm/m². Automatic Spray Coating Shall Be Applied To Be Followed By a Drying Process In a Thermal Furnace With Suitable Temperature And Time For The Process. Thickness Of Coating (60 – 80) Micron. The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design.
2
-
-
Table 1200m dia 750mm ht. , 18mm thick PLPB Top, crome plated frame structure. Table Top 18 mm Thick PLPB Board With 2mm Pvc Edgebanded Finish With As Per Approved Laminate Shade . Understructure Made Of Prime Quality 1.6 mm Thick frame. Understructure round pipe of crome platedl, Pipe 50 x 50mm With 1.6 mm Thick All Metal Pieces Shall Be Welded Properly Strongly and conformity with regulations . The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design.
1
-
-
Table Top 25mm Thick PLPB Board ( OSL ) With 2mm Pvc Edgebanded Finish With As Per Approved Laminate Shade . All Over Size Of Table 2400W x 1050D x 750H . Understructure Made Of Prime Quality CRCA 50 x 50mm Square Metal Pipe Duly Powder Coated . Understructure CRCA Metal Pipe 50 X 50mm With 1.6 mm Thick Four Side Welded With Vertically Metal Pipe . Legs Of The Table Hard Rubber Shoes . Understructure CRCA Square Metal Pipe 50 x 50mm With 1.6 mm Thick All Side Welded With Vertically & Horizontally Metal Pipe powder coated All Metal Pieces Shall Be Welded Properly Strongly and conformity with regulations . CO2 Welding Shall Be Used . All Metal Shall Be Coated. After Being Treated With At Least Three Stages Cleaned From Oil,Grease, Dust, And Other Dirt Using Special Thermal Control Coating For metal Furniture To Form a Layer Of Base Coating Of (iron phosphating) (0.4 – 0.8) gm/m². Automatic Spray Coating Shall Be Applied To Be Followed By a Drying Process In a Thermal Furnace With Suitable Temperature And Time For The Process. Thickness Of Coating (60 – 80) Micron. The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design.
1
-
-
Table Top 25mm Thick PLPB Board ( OSL ) With 2mm Pvc Edgebanded Finish With As Per Approved Laminate Shade . All Over Size Of Table 2400W x 1050D x 750H . Understructure Made Of Prime Quality CRCA 50 x 50mm Square Metal Pipe Duly Powder Coated . Understructure CRCA Metal Pipe 50 X 50mm With 1.6 mm Thick Four Side Welded With Vertically Metal Pipe . Legs Of The Table Hard Rubber Shoes . Understructure CRCA Square Metal Pipe 50 x 50mm With 1.6 mm Thick All Side Welded With Vertically & Horizontally Metal Pipe powder coated All Metal Pieces Shall Be Welded Properly Strongly and conformity with regulations . CO2 Welding Shall Be Used . All Metal Shall Be Coated. After Being Treated With At Least Three Stages Cleaned From Oil,Grease, Dust, And Other Dirt Using Special Thermal Control Coating For metal Furniture To Form a Layer Of Base Coating Of (iron phosphating) (0.4 – 0.8) gm/m². Automatic Spray Coating Shall Be Applied To Be Followed By a Drying Process In a Thermal Furnace With Suitable Temperature And Time For The Process. Thickness Of Coating (60 – 80) Micron. The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design.
1
-
-
Conference Table Top 43 mm Thick (25mm Top + 18mm Batten) PLPB Board as Per Approved Laminate Shade. Understructure Top Supported 75X25mm Prime Quality Steel Frame Leg moulded With 18mm Thick PLPB Board. Modesty Panel 18mm Thick 450 mm High PLPB Board Supported To Top. Conference Table Top Size 3000W X 1200D In 18mm Thick PLPB Board. Provided Wire Management For Conference Table Top Flushed With Flapper. Wooden Panels Flat Edge Duly Sealed With 2mm Thick Pvc Beading. Conference Table Top Divided Into Two Parts. All Wooden Panels, Gables & Modesty Fix Joints With Minifix Dowels & Other Fitting Equipment. All Wooden Panels Cleaning Corner Knitted Finish. Legs Of The Table having Hard Rubber Shoes. Metal Flapper Size 400W X 120D Duly Powder Coated. All Wooden Top , Legs & modesty Panels Assembled & Dismental Any Places Easily. Metal Leg 75x25mm Shall be Neatly Jointed Together With 18mm Thick PLPB Board Accurrately Matching Sides Avoiding Any Gaps. The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design.
1
-
-
Conference Table Top 43 mm Thick (25mm Top + 18mm Batten) PLPB Board as Per Approved Laminate Shade. Understructure Top Supported 75X25mm Prime Quality Steel Frame Leg moulded With 18mm Thick PLPB Board. Modesty Panel 18mm Thick 450 mm High PLPB Board Supported To Top. Conference Table Top Size 6500W X 1300D In 18mm Thick PLPB Board. Provided Wire Management For Conference Table Top Flushed With Flapper. Wooden Panels Flat Edge Duly Sealed With 2mm Thick Pvc Beading. Conference Table Top Divided Into Two Parts. All Wooden Panels, Gables & Modesty Fix Joints With Minifix Dowels & Other Fitting Equipment. All Wooden Panels Cleaning Corner Knitted Finish. Legs Of The Table having Hard Rubber Shoes. Metal Flapper Size 400W X 120D Duly Powder Coated. All Wooden Top , Legs & modesty Panels Assembled & Dismental Any Places Easily. Metal Leg 75x25mm Shall be Neatly Jointed Together With 18mm Thick PLPB Board Accurrately Matching Sides Avoiding Any Gaps. The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design.
1
-
-
Top Designed With 18 mm Thick Commercial Board Affixed With 0.6mm Mica. Overall Size 4500W x 1200D x 750H. Modesty Panel Having Affixed With Veneer Pressed With Polish. Wire Manager of Dia 50 mm Should Be Provided On Top For Fixing The Mic. All Edge And Structure Finished With Proper Color Combination Matched To Laminated Shade. Legs Of The Podium Hard Rubber Shoes. Wooden Panels Cleaning Corner Knitted Finish . All Wooden Panels Prime Quality Board With ISI Marked . The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design.
1
-
-
Conference Table Top 43 mm Thick (25mm Top + 18mm Batten) PLPB Board as Per Approved Laminate Shade. Understructure Top Supported 75X25mm Prime Quality Steel Frame Leg moulded With 18mm Thick PLPB Board. Modesty Panel 18mm Thick 450 mm High PLPB Board Supported To Top. Conference Table Top Size 3000W X 1200D In 18mm Thick PLPB Board. Provided Wire Management For Conference Table Top Flushed With Flapper. Wooden Panels Flat Edge Duly Sealed With 2mm Thick Pvc Beading. Conference Table Top Divided Into Two Parts. All Wooden Panels, Gables & Modesty Fix Joints With Minifix Dowels & Other Fitting Equipment. All Wooden Panels Cleaning Corner Knitted Finish. Legs Of The Table having Hard Rubber Shoes. Metal Flapper Size 400W X 120D Duly Powder Coated. All Wooden Top , Legs & modesty Panels Assembled & Dismental Any Places Easily. Metal Leg 75x25mm Shall be Neatly Jointed Together With 18mm Thick PLPB Board Accurrately Matching Sides Avoiding Any Gaps. The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design.
2
-
-
Top Designed With 18 mm Thick Commercial Board Affixed With 0.6mm Mica. Overall Size 6500W x 1300D x 750H. Modesty Panel Having Affixed With Veneer Pressed With Polish. Wire Manager of Dia 50 mm Should Be Provided On Top For Fixing The Mic. All Edge And Structure Finished With Proper Color Combination Matched To Laminated Shade. Legs Of The Podium Hard Rubber Shoes. Wooden Panels Cleaning Corner Knitted Finish . All Wooden Panels Prime Quality Board With ISI Marked . The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design.
1
-
-
Table size- 2300x600x750 Top to be made up of ISI mark 25 mm thick pre laminated Particle Board finished with 2 mm thick PVC edging applied on Through Feed Edging Machine UNDERSTRUCTURE- The under structure to be made up of CRCA, legs shall be of pipe of size 50x50mm and 40x40 cross member for support and stability finished with powder coating. Race way – CRCA raceway for carrying electrical and data wiring are provided below the table top with provision for fixing switches. Each cluster to be provided with wire riser from floor to wire raceway. The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for LAB FURNITURE range for ergonomic design.
32
-
-
Table 900m dia 750mm ht. , 18mm thick PLPB Top, crome plated frame structure. Table Top 18 mm Thick PLPB Board With 2mm Pvc Edgebanded Finish With As Per Approved Laminate Shade . Understructure Made Of Prime Quality 1.6 mm Thick frame. Understructure round pipe of crome platedl, Pipe 50 x 50mm With 1.6 mm Thick All Metal Pieces Shall Be Welded Properly Strongly and conformity with regulations . The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design.
5
-
-
Cafe Table Top 25mm Thick PLPB Board (OSL ) With 0.8mm Thick Pvc Edgebanded Finish With As Per Approved Laminate Shade . Overall Size 900 Dia X750H . Table Top Dia 600 mm . Understructure SS Round Pipe . Base Supported 4 Prone . 2mm Sheet Top Supported Plate Under The Table Top . Wooden Panels Cleaning Corner Knitted Finish . Top Panels Prime Quality Board With ISI Marked . The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for CAFE FURNITURE range for ergonomic design.
2
-
-
Overall Size:-2000WX750DX750H mm, Top to be made up of 43mm thick PLPB with 2mm thick PVC edge bending, Side Cabinate Storage wih Top Size:-1050WX450DX750mm, Pedestal and storage top to be made up of 25mm thick PLPB with 2mm thick PVC edge bending, Under structure to be made up of 18mm thick PLPB with PVC edge bending, Main table modesty to be made up of 18mm thick PLPB with PVC edge bending with on front side aluminium strip as per reference image, below table top under three drawer fixed pedestal with one number of lock and three number of S.S handle ,ERU storage having three number of openable shutter and open space as per reference image, All Wooden Panels Gables & Modesty Fix Joints With Minifix Dowels & Other Fitting Equipment , All Wooden Panels Prime Quality Board With ISI Marked.
31
-
-
LINEAR WORKSTATION IN 60MM THK PANEL BASED SYSTEM. SIZE - 1500 X 600 (1200H)-1500 X1200 WITH --R/W--WITH S/B,18 MM THK PLPB LEG ,TOP-25MM TH PLPB-1500 X 600 lipped,3 DRAWER UNIT IN PLPB-400 X 450 X 680,KEY BOARD TREY,CPU TROLLEY
94
-
-
LINEAR WORKSTATION IN 60MM THK PANEL BASED SYSTEM. SIZE - 1500 X 600 (1200H)-1500 X1200 WITH --R/W--WITH S/B,18 MM THK PLPB LEG ,TOP-25MM TH PLPB-1500 X 600 lipped,3 DRAWER UNIT IN PLPB-400 X 450 X 680,KEY BOARD TREY,CPU TROLLEY
70
-
-
Supplying & Fixing of METHODEX make Alice CenterTable size 700x700x450mm as per drawing & specification and directed by Engineer-in-Charge. The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) forGUEST HOUSE FURNITURE range for ergonomic design.
2
-
-
Supplying & Fixing of METHODEX make Alice CenterTable size 1000x600x450mm as per drawing & specification and directed by Engineer-in-Charge. The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) forGUEST HOUSE FURNITURE range for ergonomic design.
15
-
-
Supplying & Fixing of METHODEX make Bloom CenterTable size 1800x600x450mm as per drawing & specification and directed by Engineer-in-Charge. The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) forGUEST HOUSE FURNITURE range for ergonomic design.
1
-
-
Supplying & Fixing of METHODEX make Alice CenterTable size 900x900x450mm as per drawing & specification and directed by Engineer-in-Charge. The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) forGUEST HOUSE FURNITURE range for ergonomic design.
1
-
-
Table 600m dia 750mm ht. , 18mm thick PLPB Top, crome plated frame structure. Table Top 18 mm Thick PLPB Board With 2mm Pvc Edgebanded Finish With As Per Approved Laminate Shade . Understructure Made Of Prime Quality 1.6 mm Thick frame. Understructure round pipe of crome platedl, Pipe 50 x 50mm With 1.6 mm Thick All Metal Pieces Shall Be Welded Properly Strongly and conformity with regulations . The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design.
13
-
-
Cafe Table Top 25mm Thick PLPB Board With 2mm Thick Pvc Edgebanded Finish With As Per Approved Laminate Shade . Wooden Round Top Dia 450. Base Plate SS Dia 380 mm With 8 mm Thickness. 3mm Sheet Top Supported Plate Under The Table Top Screw With Round Wooden Panel Cleaning Corners Knittted Finished. Plate Supported Round Pipe 60mm Dia & 16 Guage. Wooden Panels Prime Quality Board With ISI Marked . The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for CAFE FURNITURE range for ergonomic design.
3
-
-
Table Top Rectangular Type Made Of Prime Quality 19mm Thick Commercial Board Affix With 3mm Veneer At Top . Table Top Size 500W X 500D in 19mm Thick Commercial Board . Wooden Leg Size 430mm Height. Understructure Top Supported Frame & Leg Made Of Prime Quality Solid Wood. Commercial Board Use Prime Quality With ISI Marked. All Wooden Panels Cleaning Corner Knitted Finish. Wooden Panel Joint Leg To Leg Supported To Top. The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) forGUEST HOUSE FURNITURE range for ergonomic design.
2
-
-
Reception table 2100 X 750 X 750/1200 MM. Providing & Fixing Table made out of 18mm thick ply finished with 1 laminate (are over exposed surface) . Table shall have pedestal .units with drawers & shutter below made in 18 mm thk Comm.plywood ISI grade, finished with 1 mm thk. . The table is supported on base made of 18 thk Comm.plywood ISI grade finished with 1 mm thk mica laminate . Table shall have linning in internal exposed surfaces of drawers and Storage Cabinets in approved colour laminate of 1.0 mm thick mica of approved Shade,colour & Make. Provision for two receway trays & foot rest shall be made. Drawers are to be fitted with Telescopic Channels ,Unit will also have cable manager for wires & cables. The rate shall include all necessary hardware like 75mm.long Brass/S.S.hinges/Albihari Hinges, catchers, handels,drawer Telescopic channels, locks of approved quality . The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design.
2
-
-
Reception table 2100 X 750 X 750/1200 MM. Providing & Fixing Table made out of 18mm thick ply finished with 1 laminate (are over exposed surface) . Table shall have pedestal .units with drawers & shutter below made in 18 mm thk Comm.plywood ISI grade, finished with 1 mm thk. . The table is supported on base made of 18 thk Comm.plywood ISI grade finished with 1 mm thk mica laminate . Table shall have linning in internal exposed surfaces of drawers and Storage Cabinets in approved colour laminate of 1.0 mm thick mica of approved Shade,colour & Make. Provision for two receway trays & foot rest shall be made. Drawers are to be fitted with Telescopic Channels ,Unit will also have cable manager for wires & cables. The rate shall include all necessary hardware like 75mm.long Brass/S.S.hinges/Albihari Hinges, catchers, handels,drawer Telescopic channels, locks of approved quality . The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design.
2
-
-
High Profile Revolving High Back Chair Made Of Good Quality Products Of MSPL Standard Models . Overall Size 1310H x 650D . Seat Plywood Made Of 15mm Hot Pressed Supported . Upholstery PVC Structure Moulded With Prime Quality Leatherite . PHA ( Gas-Lift ) 85mm ( TDC 152mm & BDC 67 ) . Understructure Base Revolving Pedestal Chrome Plated Steel Base With PP Hub Cap . Machanism Torsion Bar Adjustment Can Be Operated In Seating Position . Seat & Back Are Firmly Connected To The Base Frame Machanism . Machanism Provided Upright Position Locking . Chair Max Height 1310 & min Depth 650 . 510W x 510D Base Seat 120mm Thick Moulded With PU Foam , D - 45 kg/m3 , H - 20 & 520W x 720H Back Seat 100mm Thick Moulded With PU Foam , D - 45 kg/m3 , H - 20 . Base Seat Shell NA . Back Seat Shell NA . L - Patta NA . Beading Finish NA . 465/605 Arm Rest Fitted To The Seat With Armrest Connecting Brackets . Arm Rest Soft Cushioning On Fixed Chrome Plated Base . Arm Rest Height From Seat 205mm . Height From Seat To Ground 550mm . Seating Height Can Be Adjusted With a Pneumatic Gas Lift . Pedestal Pitch Centre Dia 650mm With Casters . Casters Made Of Moulded Black Nylon Metal Bolt Inserted & Fitted With 5 Nos . Twin Wheel Casters 50mm Dia .
15
-
-
Visitor Chair Made Of Good Quality Products Of MSPL Standard Models . Overall Size 840H x 580D . Seat & Back Plywood Made Of 12mm Hot Pressed Supported . Understructure Base Of Chair Metal Structure Fixed Type . Seat & Back Are Firmly Connected To The Base Frame Metal Structure . Chair Max Height 840mm . Upholstery , PHA & Machanism NA . 480W x 450D Base Seat 80mm Thick Moulded With PU Foam , D - 45 kg/m3 , H - 20 & 510W x 460H Back Seat 80mm Thick Moulded With PU Foam , D - 45 kg/m3 , H - 20 . 465/558 Arm Rest Fitted To The Seat With Armrest Connecting Brackets . Base Seat Shell ABS Cover At Underside . Back Seat Shell ABS Cover At Back Side . L - Patta Mild Steel . Beading Finish With NA . Arm Rest Height From Seat 190mm . Height From Seat To Ground 480mm . Understructure Metal Frame Structure Made Of 25mm Round Metal Pipe 2mm thick Duly Powder Coated . All Metal Pieces Shall Be Welded Properly Strongly and conformity with regulations . CO2 Welding Shall Be Used . CRCA Metal Shall Be Coated After Being Treated With At Least Three Stages And Cleaned From Oil , Grease , Dust And Other Dirt Using Special Thermal Control Coating For Metal Furniture To Form a Layer Of Base Coating Of (iron phosphating) (0.4 – 0.8) gm/m² . Automatic Spray Coating Shall Be Applied To Be Followed By a Drying Process In a Thermal Furnace With Suitable Temperature And Time For The Process . Thickness Of Coating (40 – 50) Micron.
49
-
-
Medium back revolving chair,Fabric back with adjustable lumber support, PU moulded foam with fabric upholestry seat, PU Padded adjustable armrest, Nylon base & Nylon Wheels, Synchro tilt mechanism with upright position locking. The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design.
152
-
-
Medium back revolving chair,Fabric back with adjustable lumber support, PU moulded foam with fabric upholestry seat, PU Padded adjustable armrest, Nylon base & Nylon Wheels, Synchro tilt mechanism with upright position locking. The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design.
191
-
-
Medium back revolving chair,Fabric back with adjustable lumber support, PU moulded foam with fabric upholestry seat, PU Padded adjustable armrest, Nylon base & Nylon Wheels, Synchro tilt mechanism with upright position locking. The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design.
122
-
-
Medium back revolving chair,Fabric back with adjustable lumber support, PU moulded foam with fabric upholestry seat, PU Padded adjustable armrest, Nylon base & Nylon Wheels, Synchro tilt mechanism with upright position locking. The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design.
74
-
-
Cafe Chair Overall Size 450W x 510D x 880H . Seat & Back Plywood Made Of 12mm Hot Pressed Having Radius At Bend Supported . Understructure Base Of Chair Chrome Plated Round ERW Tube Structure Fixed Type . Upholstery Structure Prime Quality 12mm Bend Ply . Understructure Base Fixed Type 19mm Dia Round ERW Pipe 1.2mm Thick Chrome Finished . Machanism & PHA ( Gas Lift ) NA . Seat & Back Are Firmly Connected To The Base Frame . Chair Max Height 880 . 415W x 400D Base Seat 12mm Thick Ply & 420W x 460H Back Seat 12mm Thick Ply . Height From Seat To Ground 470mm . All Chrome Round Tube Pieces Shall Be Welded Properly Strongly and conformity with regulations . Legs Of The Chair Hard Rubber Shoes . The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for CAFE FURNITURE range for ergonomic design.
20
-
-
High Back Chair Made Of Good Quality Products Of MSPL Standard Models . Seat Plywood Made Of 12mm Hot Pressed Back Pipe Structure . Upholstery PVC Structure Moulded With Prime Quality High Stretch Fabric Mesh . PHA ( Gas-Lift ) 85mm (TDC 152mm & BDC 67) . Seat & Back Are Firmly Connected To The Base Frame Machanism . Machanism Provided Upright Position Locking Fixed Back & Back Tilts . Tilt Adjustment Can Be Operated In Seating Position . Chair Max Height 1100 &715D . 490W x 470D Base Seat 65mm Thick Moulded With PU Foam D - 42kg/m3 & 470W x 580H 25mm Thick Back Seat Pipe Structure Moulded Fabric Mesh . 440/585 Arm Rest Adjustable Type PU . Arm Rest Height From Seat Min - 185mm & Max - 250 . Base Seat Shell NA . Back Seat Shell Pipe Structure . L - Patta Mild Steel . Beading Finish NA . Height From Seat To Ground 500mm . Understructure Base Steel Inserted PP Base With PP Hub . Casters Made Of Moulded Black Nylon Metal Bolt Inserted & Fitted With 5 Nos . Twin Wheel Casters 50mm Dia . Pedestral Pitch Centre Dia 715mm With C. The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design.
31
-
-
Visitor Chair Made Of Good Quality Products Of MSPL Standard Models . Seat Plywood Made Of 12mm Hot Pressed Back Pipe Structure . Upholstery PVC Structure Moulded With Prime Quality High Stretch Fabric Mesh . Understructure Base Of Chair Metal Structure Fixed Type . Seat & Back Are Firmly Connected To The Base Frame Metal Structure . Chair Max Height 860mm x 590D . PHA & Machanism NA . 490W x 460D Base Seat 65mm Thick Moulded With PU Foam , D - 45 kg/m3 , H - 20 & 480W x 420H Back Seat 25mm Thick Moulded With Pipe Structure Moulded Fabric Mesh . 445/590 Arm Rest Fitted To The Seat With Armrest Connecting Brackets . Base Seat Shell NA . Back Seat Shell Pipe Structure . L - Patta NA . Beading Finish NA . 445/590 Arm Rest Adjustable Type PU . Arm Rest Height From Seat Min - 175mm & Max - 235 . Height From Seat To Ground 470mm . Understructure All Metal Frame Structure Made Of 25mm Round Metal Pipe 2mm thick Duly Powder Coated . All Metal Pieces Shall Be Welded Properly Strongly and conformity with regulations . CO2 Welding Shall Be Used . All Metal Shall Be Coated After Being Treated With At Least Three Stages And Cleaned From Oil,Grease, Dust And Other Dirt Using Special Thermal Control Coating For Metal Furniture To Form a Layer Of Base Coating Of (iron phosphating) (0.4 – 0.8) gm/m² . Automatic Spray Coating Shall Be Applied To Be Followed By a Drying Process In a Thermal Furnace With Suitable Temperature And Time For The Process . Thickness Of Coating (40 – 50) Micron. The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design.
72
-
-
Medium Back Chair Made Of Good Quality Products Of MSPL Standard Models . Seat & Back Plywood Made Of 12mm Hot Pressed Supported . Upholstery PVC Structure Moulded With Prime Quality High Stretch Fabric Mesh . PHA ( Gas-Lift ) 105mm ( TDC 171mm & BDC 66 ) . Understructure Base Revolving Pedestal Chorme Plated Steel Base With PP Hub Cap . Machanism Torsion Bar Adjustment Can Be Operated In Seating Position . Seat & Back Are Firmly Connected To The Base Frame Machanism . Machanism Provided Upright Position Locking . Chair Max Height 1125 & min Depth 715 . 490W x 480D Base Seat 60mm Thick Moulded With PU Foam , D - 45 kg/m3 , H - 18 & 460W x 560H Back Seat 15mm Thick Moulded With Pipe Structure . Back , Seat Shell NA & L - Patta Mild Steel . Beading Finish With NA . 460/630 Arm Rest Fitted To The Seat With Armrest Connecting Brackets . Arm Rest Height From Seat Min 205mm & Max 265mm . Arm Rest Made Of P.U + LBkt . Height From Seat To Ground 480mm . Seating Height Can Be Adjusted With a Pneumatic Gas Lift . Pedestal Pitch Centre Dia 715mm With Casters . Casters Made Of Moulded Black Nylon Metal Bolt Inserted & Fitted With 5 Nos . Twin Wheel Casters 50mm Dia . The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design.
164
-
-
Metal powder coated frame three seater sofa-L-3CH ADV.
19
-
-
Revolving chair, Seat 15mm Hot pressed plywood with PU molded foam with Fabric Upholstery, Back 12mm Hot Pressed plywood with PU molded foam with Fabric upholstery connected with metal plate from seat, PU padded Adjustable Armrest, Push Back Mechanism with Upright position locking, 100mm Class 4 Gaslift with cover, Metal Powder coated base with Nylon wheels. The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design.
55
-
-
Three Seater Sofa-MS SOFA-505-3
2
-
-
Two Seater Sofa-MS SOFA-505-2
2
-
-
Single Seater Sofa-MS SOFA-505-1
2
-
-
Two Seater Sofa-MS SOFA-505-5
1
-
-
Cafe Chair Overall Size 480W x 490D x 780H . . Base Seat & Back Made Of Moulded PP Structure Supported ( Single Piece Moulded Seat & Back Shell ) . Understructure Base Of Chair Round SS Pipe Structure Fixed Type . Understructure Base Fixed Type 19mm Dia SS Round Pipe 1.2mm Thick . Machanism & PHA ( Gas Lift ) NA . Seat & Back Are Firmly Connected To The Base Frame . Chair Max Height 780 & Depth 490mm . 440W x 410D Base Seat Moulded With PP Structure & 440W x 390H Back Seat Moulded With PP Structure . Height From Seat To Ground 420mm . All SS Round Tube Pieces Shall Be Welded Properly Strongly and conformity with regulations . Legs Of The Chair Hard Rubber Shoes . Assembly Shell Affixed On MS Frame With Help Of Screw . The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for CAFE FURNITURE range for ergonomic design.
47
-
-
Metal powder coated frame three seater sofa with Moulded seat & back- L-3CH ADV. UP
8
-
-
Metal powder coated frame three seater sofa with Moulded seat & back- L-3CH ADV. UP
8
-
-
Metal powder coated frame three seater sofa with Moulded seat & back- L-3CH ADV. UP
10
-
-
Bean Bag in leathe finish
54
-
-
Table 450m dia 750mm ht. , 18mm thick PLPB Top, crome plated frame structure. Table Top 18 mm Thick PLPB Board With 2mm Pvc Edgebanded Finish With As Per Approved Laminate Shade . Understructure Made Of Prime Quality 1.6 mm Thick frame. Understructure round pipe of crome platedl, Pipe 50 x 50mm With 1.6 mm Thick All Metal Pieces Shall Be Welded Properly Strongly and conformity with regulations . The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design.
20
-
-
Table Top Designed With 25 mm PLPB . Top Size 3000W x 600D. Understructure Leg Designed With combination of 50x50 and 40X40mm Square CRCA 16 Guage Thick Duly powder Coated . Legs Of The Table Hard Rubber Shoes. Wooden Panels Prime Quality Board With ISI Marked . MIG Welding All - Around The Weld Joints Using Inert Gas (Argon.) The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for CAFE FURNITURE range for ergonomic design.
2
-
-
STORAGES WITH 25MM LIPPED TOPS 18MM U/S AND 9MM PLPB BACK- W X 450 D X 1050 H WITH SWING SHUTTERS Top 18mm Thick 2mm Edgebanded Finished Approved Laminate Shade , All Storage Body Made Of 18mm Thick PLPB Board With 2mm Thick PVC Edgebanded Finish of Approved Laminate Shade , Shutter Used Metallic Hinges With All Fittings , All Storage Screw With Minifix Provided Locks & Handles , All Wooden Panels , Shelve & Shutters Fix Joints With Minifix Dowels & Other Fitting Equipment , Wooden Panels Cleaning Corner Knitted Finish , All Wooden Panels Prime Quality Board With ISI Marked , Overhead Provided One No Of Shelve of 18mm Thick PLPB Board.
-
-
-
MODULAR STORAGE TYPE 1 (7.7M X 0.45M X 1.05M)
1
-
-
MODULAR STORAGE TYPE 2 (3.51M X 0.45M X 1.05M)
1
-
-
MODULAR STORAGE TYPE 3 (2.87M X 0.45M X 1.05M)
1
-
-
MODULAR STORAGE TYPE 4 (1.57M X 0.45M X 1.05M)
2
-
-
MODULAR STORAGE TYPE 5 (3.4M X 0.45M X 1.05M)
2
-
-
MODULAR STORAGE TYPE 6 (1.75M X 0.45M X 1.05M)
1
-
-
MODULAR STORAGE TYPE 7 (1.91M X 0.45M X 1.05M)
1
-
-
MODULAR STORAGE TYPE 7 (6.94M X 0.45M X 1.05M)
1
-
-
MODULAR STORAGE TYPE 7 (2.03M X 0.45M X 1.05M)
1
-
-
MODULAR STORAGE TYPE 7 (2M X 0.45M X 1.05M)
1
-
-
MODULAR STORAGE TYPE 7 (6.25M X 0.45M X 1.05M)
1
-
-
MODULAR STORAGE TYPE 7 (4.22M X 0.40M X 1.05M)
4
-
-
MODULAR STORAGE TYPE 7 (8.25M X 0.60M X 1.05M)
2
-
-
MODULAR STORAGE TYPE 7 (1.57M X 0.75M X 1.05M)
1
-
-
MODULAR STORAGE TYPE 7 (0.78M X 0.75M X 1.05M)
1
-
-
Cafe Table Top 1200x750mm Designed With 25 mm Thick PLPB Board 2mm Thick PVC Edgebanded Finish Approved Laminate Shade . Cafe Table Top Two Side Side Postform & Other Two Side Flat Edgebanded. Understructure Leg Designed With 25mm Dia CRCA Round Metal Pipe 18 Gauge Thick 40 - 50 Microns Powder Coated . All Metal Pieces Shall Be Welded Properly Strongly and conformity with regulations. CO2 Welding Shall Be Used. All Metal Shall Be Coated After Being Treated With At Least Three Stages And Cleaned From Oil,Grease, Dust, And Other Dirt Using Special Thermal Control Coating For Metal Furniture To Form a Layer Of Base Coating Of (iron phosphating) (0.4 – 0.8) gm/m² . Automatic Spray Coating Shall Be Applied To Be Followed By a Drying Process In a Thermal Furnace With Suitable Temperature And Time For The Process . The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for CAFE FURNITURE range for ergonomic design.
12
-
-
Cafe Chair Overall Size 480W x 490D x 780H . . Base Seat & Back Made Of Moulded PP Structure Supported ( Single Piece Moulded Seat & Back Shell ) . Understructure Base Of Chair Round SS Pipe Structure Fixed Type . Understructure Base Fixed Type 19mm Dia SS Round Pipe 1.2mm Thick . Machanism & PHA ( Gas Lift ) NA . Seat & Back Are Firmly Connected To The Base Frame . Chair Max Height 780 & Depth 490mm . 440W x 410D Base Seat Moulded With PP Structure & 440W x 390H Back Seat Moulded With PP Structure . Height From Seat To Ground 420mm . All SS Round Tube Pieces Shall Be Welded Properly Strongly and conformity with regulations . Legs Of The Chair Hard Rubber Shoes . Assembly Shell Affixed On MS Frame With Help Of Screw . The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for CAFE FURNITURE range for ergonomic design.
48
-
-
Cafe Table Top 25 mm Thick PLPB Board With 2mm Thick Pvc Edgebanded Finish With As Per Approved Laminate Shade. Top Size 900W x 600D X25H . Base Rectangular Ms Sheet Size 380 x 380 With 8 mm Thick. Vertically 60x60 Square Pipe. 3 mm Thick Top Supporting Plate Under The Table Top. Base Supported MS Sheet . Wooden Panels Cleaning Corner Knitted Finish . Top Panels Prime Quality Board With ISI Marked . All metal components will be duly powder coated. The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for CAFE FURNITURE range for ergonomic design.
7
-
-
Supply of FOOSBALL TABLE
2
-
-
Supply of SNOOKER TABLE
1
-
-
Sub Head-II Furniture Staff Quarter
-
-
-
Providing wooden Queen size bed as approved by architect/Engineer-in-charge for staff quarter.
(Overall Size 2000L x 1520W x 900H1 x 500H)
20
-
-
Side Table Top Square Type Made Of Prime Quality 19mm Thick Commercial Board Affix With 3mm Veneer At Top . Table Top Size 500W X 500D in 19mm Thick Commercial Board . Wooden Leg Size 450mm Height. Understructure Top Supported Frame & Leg Made Of Prime Quality Solid Wood. Commercial Board Use Prime Quality With ISI Marked. All Wooden Panels Cleaning Corner Knitted Finish. Wooden Panel Joint Leg To Leg Supported To Top. The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for STAFF QUARTER FURNITURE range for ergonomic design.
40
-
-
STUDY TABLE SIZE - 1200 X 600 (1200H) WITH S/B,18 MM THK LEG ,TOP-25MM TH PLPB-1500 X 600 lipped,3 DRAWER UNIT IN PLPB-400 X 450 X 680
20
-
-
Study table chair Size 450W x 510D x 880H. Seat & Back Plywood Made Of 12mm Hot Pressed Having Radius At Bend Supported . Understructure Base Of Chair Chrome Plated Round ERW Tube Structure Fixed Type . Upholstery Structure Prime Quality 12mm Bend Ply . Understructure Base Fixed Type 19mm Dia Round ERW Pipe 1.2mm Thick Chrome Finished . Machanism & PHA ( Gas Lift ) NA . Seat & Back Are Firmly Connected To The Base Frame . Chair Max Height 880 . 415W x 400D Base Seat 12mm Thick Ply & 420W x 460H Back Seat 12mm Thick Ply . Height From Seat To Ground 470mm . All Chrome Round Tube Pieces Shall Be Welded Properly Strongly and conformity with regulations . Legs Of The Chair Hard Rubber Shoes . The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for CAFE FURNITURE range for ergonomic design.
20
-
-
Dining table set with 4 seating Product Dimensions Table: Length 45 Inch x Width 34 Inch x Height 30 Inch | Chair: Length 17 Inch x Width 17 Inch x Height 35 Inch.
Material : Made By Solid Sheesham Wood , Table Top - Solid Sheesham Wood | Chair - Solid Sheesham Wood |
12
-
-
Two Seater Sofa MS-SOFA-505-2
36
-
-
Single Seater Sofa-MS SOFA-505-1
24
-
-
Table 900m dia 750mm ht. , 18mm thick PLPB Top, crome plated frame structure. Table Top 18 mm Thick PLPB Board With 2mm Pvc Edgebanded Finish With As Per Approved Laminate Shade . Understructure Made Of Prime Quality 1.6 mm Thick frame. Understructure round pipe of crome platedl, Pipe 50 x 50mm With 1.6 mm Thick All Metal Pieces Shall Be Welded Properly Strongly and conformity with regulations . The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design.
24
-
-
Supplying & Fixing of METHODEX make Alice CenterTable size 700x700x450mm as per drawing & specification and directed by Engineer-in-Charge. The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for SERVANT HOUSE FURNITURE range for ergonomic design.
12
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements