Ministry Of Road Transport And Highways Tender

Erection of Steel Truss (Girder) Bridge (up to 60m span) as per drawing with required camber including cartage of fabricated parts from the place of stack near site including submission of launching plan by the contractor, (duly vetted by a recognised reputable institution/ consultant if required) and approved by the engineer-in-charge. Service bolts to used shall be of approved make. The rate including of cost of all labour, T&P, equipments, civil work and consumables, cost of arranging, fabricating, errecting and dismantling of erection scheme including the cost of its designing, revising, supervision by contractor's designeer at site during erection, also including cost of all safety measures and necessary insurances of bridge and labours for proper completion of the work as per MORTH specification no. 1905 with due regard of mansoon and as per directions of the engineer-in-charge. 1) Add 12% extra ( of the cost of material resource i.e., rivets used in item no 16-25) for Scaffolding, Ropes, Winch, Chain Pully, and all other T&P and equipments. 2) For span more than 30 meters, add 1% per meter extra, but maximum 50 %, (of the above cost of scaffolding etc. plus the total labour cost for erection of the bridge). 3) For height more than 8.00 meters from river bed level, add 3% per meter extra, but maximum 50 %, (of the above cost of scaffolding etc. plus the total labour cost for erection of the bridge).} (MISS 4-2) Ramnagar block

Supply and Fixing of 20 mm dia P.F. make 10.90 grade HSFG High Strength Friction Grip Bolt to IS 3757:1985 latest to grade 10.9S with High Strength Friction Grip nut to IS 6623:2004 latest to grade 10S and high Strength Friction 2 No. washer including cost of all material, Labour, Fixing at site, all taxes, T&P etc required foe Proper completion of the work (20 X 120mm) Ramnagar block