Military Engineer Services Tender
... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Repair/ Replacement Of Sanitary/ Bath Fittings, Plumbing, Flooring, Plastering, Joinery, False Ceiling And Wall Panelling Etc At 3/8 Gr Under Age B/r-i Of Ge Dehradun. in Dehradun, Uttarakhand, with an estimated contract value of Rs. 45,00,000. The bid opening date for this tender is 05-05-2025 and the last date for bid submission is 02-06-2025. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Military Engineer Services - MES Tender
Civil And Construction
Eprocure
Opening Date5 May 2025
Closing Date2 Jun 2025
Tender Amount₹ 45,00,000
Costs
EMD
₹ 90,000Document Cost
₹ 500Tender Fee
Refer Documents
Summary
Repair/ Replacement Of Sanitary/ Bath Fittings, Plumbing, Flooring, Plastering, Joinery, False Ceiling And Wall Panelling Etc At 3/8 Gr Under Age B/r-i Of Ge Dehradun.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_706679_1Bid Award Id
ViewTender No
8970/A/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Taking down chowkhats or frames with shutter exc 1.5 sqm n. exc 4.0 sqm each without taking off shutter from the frame complete all as specified and directed
1
103
103
... More
Taking down shutter of any description, not exc. 1 Sqm each complete all as specified and directed
5
104
520
... More
Taking down shutter of any description, exc. 1 Sqm but n. exe 2 sqm each complete all as specified and directed
25
106
2650
... More
Supply and fix factory made 100% solid wood plastic composite (WPC) door frame of size 75 mm x 50 mm x 50 mm made from wood plastic composite (single extruded process) material with density 780 Kilogram/Cubic Metre from ISO certified company door should be water proof teRunning Metreite proof fire retardant and having good screw holding capacity all as specification and drawing complete all as specified and directed
150
104
15600
... More
Supply and fix 30 mm thick moulded WPC factory made 100% solid door (confoRunning Metreing as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side palin with density not less than 600 Kilogram/Cubic Metre. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, Running Metreite proof, fire retardant and having screw holding capacity complete all as specified and directed
45
106
4770
... More
Material and labour for 30 mm thick, factory made flush shutters,BWR solid core construction, with block board core and plywood face, pannels, commercial type on both sides including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified and directed.
30
107
3210
... More
Material and labour for 35mm thick IInd class hard wood Golder Teak plain fancy, framed panelled shutter machine made with panels of timber flat on both sides feather edged supplied and fitted to chowkats complete all as specified and directed.
30
107
3210
... More
Supply and fix 35 mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) and as directed.
30
107
3210
... More
Taking down Aluminium window shutter size n. exc 1 Sqm each including opening up of the corner junctions and replacement of defective members (matching with existing material) alongwith necessary cleats, butt hinges and refixing in the same opening to make the window functional complete all as specified and directed.
20
107
2140
... More
Taking down Aluminium door shutter size exc 1 Sqm n exc. 2sqm eachincluding opening up of the corner junctions and replacement of defective members (matching with existing material) alongwith necessary cleats, butt hinges and refixing in the same opening to make the door functional complete all a specified and directed.
10
107
1070
... More
Supply and fix mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe.290.Gde-E-165 including necessary welding, drilling hole complete all as specified and directed
300
108
32400
... More
Supply and fix in repair Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including complete all as specified and directed.
100
109
10900
... More
Dismantling of timber scantlings 40 Sqcm and over in section in any position and in any situation. (unframed work) complete all as specified and directed.
0.75
110
82.5
... More
Supply and fix steel work in tubular trusses/purlin including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed
900
111
99900
... More
Supply and fix 100 mm size stainless steel butt hinges 204 grade, and fixed with stainless steel screws, complete all as specified and directed.
45
112
5040
... More
Supply and fix 200 mm long, solid in one piece stainless steel 204 grade, barrel tower bolts of extruded section 10mm dia shoot complete all as specified and directed
45
114
5130
... More
Supply and fix 150 mm long, solid in one piece stainless steel 204 grade, barrel tower bolts of extruded section complete all as specified and directed.
45
115
5175
... More
Supply and fix 100 mm size solid in one piece stainless steel handles, in 304 grade and fixed in stainless steel screws, complete all as specified and directed
90
115
10350
... More
Supply and fix stainless steel sliding door bolts 204 grade, with bright bolt not less than 16mm dia with and incl a minimum of 6 bolts and nuts,and fixed 250mm long complete all as specified and directed.
15
116
1740
... More
Supply and fix floor door stopper of alluminium alloy body and tongue anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm. complete all as specified and directed.
15
118
1770
... More
Supply and fix in repair 300 mm mild steel, ordinary rat tail rod pattern spring welded to steel/fixed to wooden door frame including roller and roller plate complete all as specified and directed.
15
125
1875
... More
Dismantling of old aluminium anodised partition with frame, (fixed type) with aluminum glazing clip, snap beading and refixing the same in other locations complete all as specified and directed
25
126
3150
... More
Supply and fix 5 mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.50sqm each pane including Hacking out old broken glass (any thickness) complete all as specified and directed
250
127
31750
... More
Supply and fix glazing (5.00 mm thick plain /frosted glass) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket and aluminium snap beading etcincluding Hacking out old broken glass (any thickness) complete all as specified and directed
50
128
6400
... More
Supply and fix welding in repairs length exc 2.5 cm but n. exc 5 cm & metal to be welded n.exc 6 mm thick complete all as specified and directed.
100
129
12900
... More
Supply and fix in repair aluminium (extruded section) Door closer hydraulically regulated, designation No.1 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kilogram and fixed with stainless steel screw complete all as specified and directed.
10
131
1310
... More
Supply and fix in repair 20mm dia stainless steel 202 Gde drapery rod with incl brackets, decorative finials at both ends complete all as specified and directed.
150
132
19800
... More
Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors incl taking up or down old tubing complete all as specified and directed.
100
136
13600
... More
Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors incl taking up or down old tubing complete all as specified and directed.
150
138
20700
... More
Material and labour PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in benching to drain, holdfast, padding to roof/chhajja, coping, bed block etc. and the like edge slightly rounded or chamfered including necessary use and waste of formwork and demolition of existing old cement concrete (un-reinforced) not exc 15 cm thick in ground floor and paving below or above ground level complete all as specified and directed.
0.5
139
69.5
... More
Material and labour cement concrete 1:3:6 type C-1(using 20 mm graded aggregate) 75 mm thick as in plinth protection / path surface finished even and smooth without using extra cement including demolition existing PCC complete all as specified and directed
300
140
42000
... More
Material and labour PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling, mass concrete etc. including demolition of existing old cement concrete (un-reinforced) not exc 15 cm thick in ground floor and paving below or above ground level complete all as specified and directed.
1
141
141
... More
Material and labour for hardcore of gauge exc 63 mm but n.exc 100 mm deposited, spread and leveled in layers n.exc 15 cm thick, watered and rolled/rammed to a true surfaces in broken stone or boulder complete all as specified and as directed.
-
142
-
... More
Material and labour for 100mm thick cement concrete 1:4:8 type D2 using 40mm graded stone aggregateas in sub base etc, coplete all as specified and directed
-
143
-
... More
Material and labour for 25 mm thick cement concrete in 1:2:4 type B-0( using12.5mm graded aggregate as in leveling course to floor etc, complete all as specified and directed
-
146
-
... More
Material and labour for prepolished chequered cement concrete tiles coloured 30cmx30cmx22-25mm thick, set jointed and pointed in neat cement slurry @ 3.00Kg/Sqm with grey cement and pigment over and including 15mm thick screed bedding layer (1:6) complete all as specified and including dismantling of tiles complete all as specified and directed
150
147
22050
... More
Material and labour non skid ceramic coloured tiles (300x 300mm) x 7 to 8mm thick as in floor set and jointed in neat cement slurry @ 3.00Kg/Sqm and pointed in white or coloured cement to match the surface of tile on and including screed bed or bedding layers of mortar 15 mm thick for laying floor finishes in CM 1:6 and including dismantling of tiles complete all as specified and directed
100
148
14800
... More
Material and labour Glazed ceramic tiles coloured of size 450x 300 x 6 to 7mm , as on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry @ 3.00 Kg/Sqm and pointed in white cement to match over and including 15 mm thick rendering in CM 1:4 for receiving tiles as in backing and including dismantling of old tiles complete all as specified and directed
150
149
22350
... More
Material and labour for double Charge Vitrified Ceramic tiles light shade polished (square / rectangular) of 10mm thick, area of each tile n.exc exceeding 0.36 sqm as in floor etc. set and jointed in neat cement slurry @ 3.00 Kg/Sqm and pointed in white or coloured cement to match the surface of tile on and including screed bed or bedding layers of mortar 15 mm thick for laying floor finishes in CM 1:6 and including dismantling of tiles complete all as specified and directed
100
150
15000
... More
Material and labour in Patches non skid ceramic coloured tiles (300x 300mm) x 7 to 8mm thick as in floor set and jointed in neat cement slurry @ 3.00Kg/Sqm and pointed in white or coloured cement to match the surface of tile on and including screed bed or bedding layers of mortar 15 mm thick for laying floor finishes in CM 1:6 and including dismantling of tiles complete all as specified and directed
25
156
3900
... More
Material and labour in patches Glazed ceramic tiles coloured size of size 450x 300 x 6 to 7mm , as on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry @ 3.00 Kg/Sqm and pointed in white cement to match on and including 15 mm thick rendering in CM 1:4 for receiving tiles as in backing and including dismantling of tiles complete all as specified and directed
50
157
7850
... More
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed
12.5
159
1987.5
... More
Material and labour for 20 - 25 mm thick machine cut Kota stone slab as in flooring over 15 mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry @ 3.00 Kg/Sqm mixed with pigment to match the shade of the slab including necessary grinding, rubbing, rounding to exposed edges and polishing in granite finish complete all as specified and directed.
100
160
16000
... More
Material and labour Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
-
161
-
... More
Material and labour for 60 mm thick pre polished rubber moulded coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-35 Grade with grey cement with pigment including demolition of existing floor complete all as specified and directed
150
167
25050
... More
Material and labour for Cutting/grinding and polishing of existing kota sotne/ terrazzo floor in top surface complete all as specified and directed.
250
168
42000
... More
Material and labour for 18-20 mm thick granite ( of any type) (table rubbed and polished ) in steps, jambs,pillars, window-cills, cooking platefoRunning Metre, and like in ceme t mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
25
169
4225
... More
Material and labour brick work with sub class ‘B’ bricks old size straight or curved on plan exc. 6 mtr mean radius built in CM(1:6) and including demolition of old brick work complete all as specified and directed.
15
170
2550
... More
Material and labour for rendering 15mm thick in patches n exc 3 Sqm in cement mortar 1:4 mixed with and including water proofing compound , on fair faces of brick/concrete surfaces of wall,finished even and fair without using extra cement including taking down the existing plaster complete all as specified and directed.
150
171
25650
... More
Material and labour for rendering 15 mm thick in CM 1:6 on fair faces of brick /concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed.
100
171
17100
... More
Material and labour for rendering 15 mm thick in CM 1:6 on fair faces of brick /concrete surfaces and finished even and smooth without using extra cement including taking down the existing plaster complete all as specified and directed.
100
172
17200
... More
Material and labour for rendering 15mm thick in cement mortar 1:4 mixed with and including water proofing compound, fair faces of brick/concrete surfaces finished even and fair without using extra cement complete all as specified and directed.
100
173
17300
... More
Material and labour for preparation of new plastered surfaces of wall and applying wall care putty 1 to 1.5 mm thick to make the surface smooth complete all as specified and as directed
-
176
-
... More
Material and labour for two coat of oil bound distemper in any tint on walls including preparation of New plastered surfaces of walls (plastered) , complete all as specified and directed
-
177
-
... More
Material and labour for two coat of cement base paint on external wall surfaces including preparation of New plastered surfaces of walls (plastered), complete all as specified and directed .
-
178
-
... More
Supply and fix in repair galvanised mild steel wire cloth. 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including wooden beading complete all as specified and directed.
75
179
13425
... More
Supply and fix in repair 4 mm thick 'E' board (classic) of size 600x600 mm false ceiling including & fixing of frame work made of special section MS sheet glavanised with zine coating , cellular nitro painting & consisting of angle cleats of size 25 mm wide, 1.60 mm thick with flange fixing to the ceiling with dash fastener 12.5 mmx40 mm long or with 4 mm dia GI wire or fixed with nails or bolts in GI channel 45x14x0.90 mm runner at 600 mm c/c including fixing of E board with ceiling section & perimeter of angle 25x25x0.50 mm thick including taking down the existing ceilling complete all as specified and directed.
50
180
9000
... More
Supply and fix in repair hollow profile PVC Wall panneling consisting of 5mm thick PVC sheet inclusive of solvent and fixing to walls on PVC frame including all fillets as per specifications and drawing including taking down the existing Wall penalling etc complete all as specified and directed.
250
153
38250
... More
Cutting chases for concealed water tubing and making good in CM 1:3 on brick wall cutting exc 10 Cm & n.exc 20 Cm in girth.complete all as specified and directed.
30
154
4620
... More
Supply and fix Rotational moulded polyethylene(triple layer white) water storage tanks 500 Ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position as specified in SSR Part I including dismantling of water tank and remove from site complete all as specified and directed.
10
154
1540
... More
Supply and fix Rotational moulded polyethylene (triple layer white) water storage tanks 1000 Ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position as specified in SSR Part I including dismantling of water tank and remove from site, complete all as specified and directed.
5
155
775
... More
Supply and fixing in repair PVC connection 15 mm dia 450 mm long with brass fly nut at both ends connected to iron pipe complete all as specified and directed.
100
156
15600
... More
Supply and fix in repair vitreous china squatting pan “ORISSA PATERN” of size 580 mm x 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including single trap spun casted 60 cm long fix in eposy mortar connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and directed.
15
165
2475
... More
Supply and fix in repair 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including bracket with 32 mm dia PVC pipe 600 mm long complete all as specified and directed.
17
171
2907
... More
Supply and fix in repair 550x400mm Wash basin, vitreous China (Flat back) including fixing and pinning in ends of brackets including brass waste coupling of requisite size and waste pipe complete all as specified and directed.
5
166
830
... More
Supply and fix in repair pillar taps, brass, with capston heads, fancy type chromium plated, screwed down high pressure with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed.
25
167
4175
... More
Supply and fix in repair 15mm bore Bib taps long body, cast copper alloy fancy type chromium plated with hand elbow operated handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
60
169
10140
... More
Supply and fix in repair stainless steel grating 100 mm dia size with or without hole, complete all as specified and directed.
50
170
8500
... More
Material and labour for cleaning of water storage tank 500/1000 Ltr capacity mechanically using pressure pump with disinfectant chemical including cleaning & removing all scale & dirt etc from existing tanks, mouths of circulating pipes and outer surface of any description & washing down in the manner for the following capacity complete all as specified and directed.
50
171
8550
... More
Supply and fix in repairs 20 mm dia ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and directed
50
175
8750
... More
Supply and fix in repair vitreous China wash down (EWC) water closet pan(pedestal pattern), white (excluding flushing cistern and flush pipe) but including seat and cover white for pedestal pattern complete all as specfied and directed.
2
176
352
... More
Supply and fixing in repair vitreous china wash hand basin white, oval type counter top of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe, waste fitting etc. complete all as specified and directed.
10
185
1850
... More
Supply and fix in repair half stall china urinals (wall type) complete incl plugs, bedding urinal to plugs with and incl 60 mm long screws, pointing around urinal back in cement and waste pipe etc complete all as specified and directed
5
186
930
... More
Supply and fix 32 mm dia waste fittings, brass chromium plated for glazedware sink, WHB, etc with long screwed shanks and flynuts, flange embedded in red lead cement and other end fixed complete all as specified and directed.
30
199
5970
... More
Supply and fix in repair 15 mm dia CP brass centre hole basin mixer with accessories in wash basin for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed.
1
200
200
... More
Supply and fix in repair 15 mm dia CP brass Wall mixer with provision of over head shower complete with 115 mm long bend pipe, connecting legs & wall flange complete all as specified and directed.
1
205
205
... More
Supply and fix in repair CP brass angle cock 15 mm bore complete all as specified and directed..
100
197
19700
... More
Supply and fix in repair Plastic Water Closet seat cover ,white, closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
20
199
3980
... More
Supply and fix in repair PVC waste pipe flexible type 32 mm dia with coupler complete all as specified and directed .
100
200
20000
... More
Supply and fix in repair PVC waste pipe for urinal flexible type with 50 mm dia coupler complete all as specified and directed .
10
205
2050
... More
Supply and fix in repair 75 mm bore UPVC (SWR) pipe 4 Kilogramf/cm2 single socketed in any length with rubber ring, fixed on wall etc, complete all as specified and directed .
150
233
34950
... More
Supply and fix in repair 110 mm bore UPVC (SWR) pipe 4 Kilogramf/cm2 single socketed in any length with rubber ring, fixed on wall etc, complete all as specified and directed .
160
247
39520
... More
Material and labour for two coat of oil bound distemper in any tint on walls including preparation of old decorated surfaces of walls (plastered) by brooming down with core wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and finally clean with sand paper complete all as specified and directed
9999
193
1929807
... More
Material and labour for two coat of cement base paint on external wall surfaces including preparation of old decorated surfaces of walls (plastered) by brooming down with core wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and finally clean with sand paper complete all as specified and directed .
8000
194
1552000
... More
Material and labour for preparation of new surfaces of wood & wood based material of any description over 10 cm width or girth and applying two coat of Synthetic enamel Paint over a coat of pink primer, complete all as specified and directed .
-
197
-
... More
Material and labour for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxiside primer, complete all as speciied and directed.
200
201
40200
... More
Supply and fix in repair 12 mm thick prelaminated particle board exerior grade in bottom panel, rubber gasket, aluminium glazing clips complete all as specified and directed.
120
193
23160
... More
Supply and fixing in repairs heavy duty thread type PVC water tank cover with fixing frame fixed on PVC tank with 4 Nos of screws for 500/1000 ilts tankcomplete all as specified and directed .
25
200
5000
... More
Supply and fixing in repair CP health faucet with 1.20 mtr metallic expandable tube & hook complete all as specified and directed.
10
201
2010
... More
Excavation in trenches, n exc 1.5 mtr wide and n exc 1.5 mtr in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n exc 10 Sqm on plan and n exc 1.5 mtr in depth and getting out in any type soil complete all as specified and directed.
58
202
11716
... More
Returning filling in soil including spreading leveling watering and well ramming in layers not exc 25 Cm complete all as specified and as directed.
10
203
2030
... More
Removing excavated material /soil n.exc 50 m and depositing where directed at a level n exc 1.5 mtr above the starting point complete all as specified and as directed.
48
193
9264
... More
Supply and fixing in repair mirror cabinet of size 446x505x125 mm, decorative type PVC frame, fixed with PVC rawal plug with CP brackets screw fixed, complete all as specified and as directed.
10
199
1990
... More
Cleaning of manholes not exceeding 1.5m depth and removing the sludge and burying the waste material in borrow pits. Note:-(cost of the borrowpit shall be deemed to be included in the quoted rates of this item), complete all as specified and directed.
75
200
15000
... More
Cleaning of sewage pipe line 150 mm to 200 mm dia pipe and by rodding or by bamboo & removing the sludge/waste mtrl and burying the waste material in borrow pits. Note:-(cost of the borrowpit shall be deemed to be included in the quoted rates of this item), complete all as specified and directed.
1000
201
201000
... More
Pumping out sewage water from the man holes /Septic taank/soakage well at different locations by means of sewage tanker fitted with pump (5000 Ltr capacity) and disposing out off MD land complete all as specified and as directed.
50
202
10100
... More
Constn of soakage well, excavation in any type of soil, foundation PCC 1:3:6, wall of honeycombed , Brick masonary in CM, RCC cover slab size of well 2.40 dia and 3.00m depth , including demolition of existing old unserviceable soakage well and filling soil to match surface with existing ground surface complete all as specified and directed as per TD of CE Barreilly zone
Note:- the rate of soil for filling in old U/S soakage well is included with this item.
2
180
360
... More
Demolition and breaking up drain pipes (SGSW, AC or reinforced concrete) 150mm bore set in cement mortar complete all as specified and directed.
100
181
18100
... More
Material and labour for PCC (1:4:8) type D-2 (using 20 mm graded crushed stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and directed.
95
107
10165
... More
Supply and fix in repair 150 mm Salt glazed stoneware drain pipes, grade ‘A’ complete all as specified and diirected
100
108
10800
... More
Material and labour for 65-70mm thick Pre-Cast Factory made RCC M-30 as in Cover Slab in different size of Manholes, Septic Tanks or Similar Articles with Plain Faces, all round 1mm thick plain sheet on the edge painted with bituminous paint on external surface incl reinforcement and RCC cover should be engraved CA No and MES and set in Cement Mortar 1:4, including complete all as specified and as directed.
25
109
2725
... More
Material and labour for taking out old existing roof treatment with plaster from existing RCC roof and cleaning of roof slab including picking, sweeping clean and washing down with water to remove dust & providing water proofing treatment with polymeric standard water proofing memberane, complete all as specified and described as under : (a) providing screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:3 over roof surface mixed finished fair and even with & including WPC as per manufacturers instructions. (b) Prepration of surface and applying one coat of polymeric primer @ 0.30 Kg/Sqm. (c) Supply & providing APP based polymeric water proofing membrane 3mm thick of weight not less than 3.60 Kg/Sqm reinforced with polyester non woven fabric (weight not less than 150 gms/sqm) centre core including coating the surface with the compatible primer and torch application of membrane with 10cm overlaps as required there of, (d) applying one coat of polymeric modified bitumen 85/25 @ 1.2 Kg/Sqm.complete all as specified and directed including dismantling/taking down of existing water tank and re-fixing in same podition.
Note : The work of water proofing treatment shall be got executed through manufacturer or authorised applicator only. Note : The work will be carried out upto double storey builing the rate of scafolding is included for this item also.
1175
139
163325
... More
Material and labour for point wiring with 1100 Volts, grade 1.5 Sqmm (nominal area), PVC insulated but unsheathed multistranded copper conductor single core FRLSH cable drawn through and including non metallic medium duty rigid PVC surface/ concealed conduit as per existing or as directed at site with medium duty 20mm dia or higher size PVC conduit complete with all accessories such as socket, elbow, junction box, bell mouth, bend, reducer etc including pressed iron/steel suction box of thickness 1.2 mm for mounting of switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet as top cover, and 1.5 Sqmm (nominal area) single core FRLSH, PVC insulated 1100 Volts, grade multi stranded unsheathed FRLSH copper conductor cable green colour as earth wire upto common earth and connected to earth dolly including cutting chases for conduits and sunken boxes including taking down existing unserviceable copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc as existing for the followings: Note : The wiring to be done as per IE rule and as per colour code.
-
-
-
... More
One light point, controlled by one way switch, complete all as specified and diirected
60
140
8400
... More
One fan point, controlled by one way switch through regulaor, complete all as specified and diirected
15
141
2115
... More
One bell point, controlled by bell push switch, complete all as specified and diirected
2
142
284
... More
One three pin 5 Amp socket on same board with other switches, complete all as specified and diirected
20
143
2860
... More
One three pin 5 Amp socket on independent board, complete all as specified and diirected
10
146
1460
... More
All as per Item No 106.00 here-in- before but one three pin 15 Amps switch socket outlet on the independent board with 2.5 sq mm PVC insulated FRLSH copper conductor and 2.5 Sqmm FRLSH copper conductor for continuous earthing, complete all as specified and diirected
5
147
735
... More
Material and labour for point wiring with 1100 Volts, grade 1.5 Sqmm (nominal area), PVC insulated but unsheathed multistranded copper conductor single core FRLSH cable drawn through existing concealed conduit any type or size complete including pressed iron/steel suction box of thickness 1.2 mm for mounting of switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet as top cover, and 1.5 Sqmm (nominal area) single core FRLSH, PVC insulated 1100 Volts, grade multi stranded unsheathed FRLSH copper conductor cable green colour as earth wire upto common earth and connected to earth dolly including cutting chases for sunken boxes after taking down existing unserviceable copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc as existing for the followings: Note : The wiring to be done as per IE rule and as per colour code.
-
-
-
... More
One light point, controlled by one way switch, complete all as specified and diirected
200
167
33400
... More
One fan point, controlled by one way switch through regulator, complete all as specified and diirected
25
167
4175
... More
One bell point, controlled by bell push switch, complete all as specified and diirected
2
167
334
... More
One three pin 5 Amp socket on same board with other switches, complete all as specified and diirected
45
167
7515
... More
One three pin 5 Amp socket on independent board, complete all as specified and diirected
20
167
3340
... More
All as per Item No 107.00 here-in- before but one three pin 15 Amps switch socket outlet on the independent board with 2.5 sq mm PVC insulated FRLSH copper conductor and 2.5 Sqmm FRLSH copper conductor for continuous earthing complete all as specified and diirected.
10
167
1670
... More
Material and labour for sub main wiring with 2 single core wire for phase and neutral and one run of earth wire PVC insulated unsheathed cable 1100 Volts grade heavy duty FRLSH copper conductor multistranded drawing in and including 20 mm dia or higher medium duty PVC surface/ concealed conduit/ flexible conduit as existing or as directed at site whereever required and conduit accessories and fittings including one single core green colour PVC insulated unsheathed FRLSH cable copper conductor multistranded as earth wire upto common earth and connected to earth dolly complete including cutting chases for conduits etc after taking out old unserviceable submain and making good disturbed surfaces of walls, floors, etc as existing for the followings sizes of wires all as directed. Note : The wiring to be done as per IE rule and as per colour code.
-
-
-
... More
2 x 4.0 sq. mm + 1 x 4.0 sq. mm earth wire, complete all as specified and diirected
50
170
8500
... More
2 x 6.0 sq. mm + 1 x 6.0 sq. mm earth wire, complete all as specified and diirected
50
171
8550
... More
Material and labour for sub main wiring with 2 single core wire for phase and neutral and one run of earth wire PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor multistranded drawn in existing concealed conduit any type or size including one single core green colour PVC insulated unsheathed cable FRLSH copper conductor multistranded as earth wire upto common earth and connected to earth dolly complete after taking out old unserviceable submain and making good disturbed surfaces of walls, floors, etc as existing for the followings sizes of wires all as directed. Note : The wiring to be done as per IE rule and as per colour code.
-
-
-
... More
2 x 4.0 sq. mm + 1 x 4.0 sq. mm earth wire, complete all as specified and diirected
50
170
8500
... More
2 x 6.0 sq. mm + 1 x 6.0 sq. mm earth wire, complete all as specified and diirected
70
171
11970
... More
Supply and fix in switch piano flush type single pole one way 230 Volts 6 Amp complete all as specified and directed.
-
173
-
... More
Supply and fix in socket outlet 3 pin, 230 Volts 5/6 Amps flush type multipurpose 5 pin complete all as specified and directed.
-
176
-
... More
Supply and fix in switch piano flush type, single pole, one way, 230 Volts 15/16 Amps complete all as specified and directed.
-
177
-
... More
Supply and fix in socket outlet multipurpose having provision for 3 pin, 230 Volts 15/16 Amp and 3 pin, 5/6 Amp, piano flush type complete all as specified and directed.
-
178
-
... More
Supply and fix in bell push flush type 5 Amps 230 Volts single pole complete all as specified and directed.
-
179
-
... More
Supply and fix in calling bell ding dong type AC 230 Volt single pole complete all as specified and directed.
-
180
-
... More
Supply and fix in repair stepped type regulator socket type double module 5 step for ceiling fan 1200/1400 mm size 230 volts, 6 Amps 120 watts complete all as specified and directed.
45
153
6885
... More
Supply and fix in ceiling rose, three terminal ISI marked surface bakelite suitable for batten fitting complete all as specified and directed.
-
154
-
... More
Supply and fix in repair energy efficient LED tube light fittings 20 Watts, 230 volts with efficiency of not less than 100 lumens per watt, PC extruded body with PC diffuser including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as directed.
230
154
35420
... More
Supply and fix in repair energy efficient LED tube light fittings 10 Watts, 230 volts with efficiency of not less than 100 lumens per watt, PC extruded body with PC diffuser including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as directed.
10
155
1550
... More
Supply and fix in repair LED luminaire 600 mm x 600 mm, 35/36 watt, (White/ warm white as per user equirement at site) 220 Volts, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.
10
156
1560
... More
Supply and fixing in repair LED building security light fitting 35 Watt 230 Volts, AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including bracket made out of 32 mm bore medium grade GI pipe made to shape with bolts, nuts & washers of min 1.2 mtr incl grouting of nuts or fasteners clamps and conductor to fitting with 3 core 1.5 sqmm PVC insulated cable complete all as specified incl taking out old u/s fitting complete all as specified and diirected
10
165
1650
... More
Supply and fix in repair distribution board SPN 8 Way double door, for mounting MCBs isolator, ELCBs etc factory made fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar 100 Amps rating of IP 43 protection including taking down existing unserviceable and depositing to MES store yard complete all as directed.
Note:- DB and MCCB/MCB shall be of same make.
5
171
855
... More
Supply and fix in repair distribution board vertical Triple pole and neutral double door 415 Volt 4 way DBs IP-43 IK- 09 Vertical type suitable for 160 Ams rated bus bar & including one MCCB 100 Amp 4 pole as incoming incl taking down existing unserviceable and depositing to MES store yard complete all as directed.
Note:- DB and MCCB/MCB shall be of same make.
1
166
166
... More
Supply and fix in repair MCB single pole and neutral 240 volt 10 KA 40 Amp 'C' series conforming to ISI marked complete all as specified and directed.
3
167
501
... More
Supply and fix in repair MCB single pole and neutral 240 volt 10 KA 32 Amp 'C' series conforming to ISI marked complete all as specified and directed.
2
169
338
... More
Supply and fix in repair MCB single pole 240 volt 10 KA 6- 32 Amp 'C' series conforming to ISI marked complete all as specified and directed.
30
170
5100
... More
Supply and fix in repair MCB TPN 415 volt 10 KA 63 Amp 'C' series conforming to ISI marked complete all as specified and directed.
1
171
171
... More
Material and labour for replacement for earthing complete with galvanised steel earth plate electrode 60x60cmx6mm thick burried directly in ground ( earth pit not less than 2.25 Mtr deep below ground level ) with top edge of the plate not less than 1.5 Mtr below normal ground level, connected to galvanised from 4 mm dia earth lead by means of bolts, nuts, check nuts and wathers of GI or steel all as shown in electrical plate No. 5 of SSR Part-I 1991 connected to earthing test point/transformer/panel all as specified or indicated and testing on completion as directed by the Engineer-in-Charge including necessary excavation & earth work in any type of soil, funnel, PCC chamber (1 : 3 : 6) type C1, RCC pit cover , charcol, salt including provision of earth lead protected by 40mm dia light grade GI pipe and 20mm dia medium grade GI Pipe for watering complete. Note: (i) If the desired earth resistance less than 05 Ohm is not found within permissible limit shall be redone by contractor at no extra cost.
(ii) Cost of GI wire 4 mm dia earth lead and 20mm dia light grade GI pipe and 20mm dia medium grade GI Pipe for watering upto 7.5 mtr is included in the rate quoted for this item.
4
175
700
... More
Material and labour for laying, jointing and testing in replacement underground XLPE insulated & PVC sheathed, armoured heavy duty multistranded electric cable with aluminium conductor, 1100 volts grade in trenches/ ducts/ along poles/ through pipe/ under road/ PCC etc and connecting with new aluminium lugs including taking out existing unserviceable of any size/ type complete for the following cables of cross sectional area all as directed: Notes:
(a) Excavation, returning, removal, sand cushioning, cable protection covers, GI protection pipe etc shall be measured and paid separately.
(b) Any damage done during cable excavation to the existing UG infra like UG pipelines, UG electric cables, OFC etc shall be repaired by the contractor at their own expenses.
(c) Cost of T&P required for handling/ laying of cable is deemed to be included in the rate quoted by the contractor.
-
-
-
... More
10.0 Sqmm, 4 core, complete all as specified and directed.
90
201
18090
... More
16.0 Sqmm, 4 core, complete all as specified and directed.
90
193
17370
... More
Excavation in trenches in any type of soil not exc. 1.5 mtr wide and not exc. 1.5 mtr in depth for laying of cable, foundation etc and getting out complete all as specified and directed.
25
185
4625
... More
Material and labour for sand cushioning & covering of UG cable using crushed metal sand in trenches for cable protection complete all as specified and directed.
7
186
1302
... More
Material and labour for sub class B bricks well burnt of size 23 x 11.5 x 7.5 cm for protection of UG cable laid dry flat over the cable width wise across the length of the cable and abutting each other with gap less than 10mm between the adjacent bricks in trenches complete all as specified and directed.
800
201
160800
... More
Returning, filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm in soil complete all as specified and directed.
16
193
3088
... More
Removing of excavated soil to a distance n exc 50 mtr and deposited where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.
9
200
1800
... More
Supply & Laying GI tubing light grade with all fittings and accessories for protection of cables on ploe/ wall or under road crossings including clamps, nuts, bolts etc of size 50 mm complete all as specified and directed.
6
201
1206
... More
Attending internal Electric complaint in the blocks/lines/offices in the OTM Accn of 3/8 GR due to any reason like no supply ,any fualt/complaints rectifications with supply & replacement of the following electric stores as mentioned in item No 137 to 141 here in after by trained person complete all as specified and directed.
Notes :-
(a) This item shall be measured and paid only when store requirement for attending and resolving the complaint is NIL
(b) Incase, stores are required to attend and resolve the complaint, this item will not be measured and payment to the contractor shall be done under relevant items from 137 to 141.
(c) All T&P and safety tools required to above job are included in the unit rate.
(d) Unit rates also include the conveyance and communication faicility to requried the complete the job.
(e) The complaint register,complaint slips for each area/zone ,materials issue register for each complaint slips will be maintain by the contractor or rep/supervisor and daily produced all documrnts to the JE/MCM / AGE E/M
(f) Materials will provided by the contractor through this contract & neccessary unserviceable or replaced items/unused items deposited back to complaint cell. unserviceable/ replaced items will be credited in the Sch of credit items.
50
200
10000
... More
Supply and fixing in repair wall mounted LED tube light fitting 1x20 watts polycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 6500K & lumen input output 100 Lumen per watt and connected to ceiling rose with required length of two core copper cable of suitable size fixed on wall/roof including dismantling existing light fitting complete all as specified and directed.
168
201
33768
... More
Supply and fixing in repair wall mounted LED tube light fitting 1x10 watts polycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 6500K & lumen input output 100 Lumen per watt and connected to ceiling rose with required length of two core copper cable of suitable size fixed on wall/roof including dismantling existing light fitting complete all as specified and directed.
50
202
10100
... More
Supply and fixing in repair LED building security light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete voltage surge protection of 4kv & with 3 core 1.5 sqmm PVC insulated cable complete all as specified including taking out old u/s fitting complete all as specified and directed.
5
201
1005
... More
Supply and fixing in repair fully diffused recessed mounted 2'x2' LED luminaire 36 Watt 6500K in White & grey housing with profiled & flat diffuser, complete all as specified and directed.
5
201
1005
... More
Supply and fixing in repair capacitor 2.5 to 3.15 MFD as per existing capacity of 240 volts AC complete all as specified and directed.
50
296
14800
... More
Note :- Amount of credit of Rs. 77067.00 for retrieved materials is mentioned in Schedule of Credit Page No 36 & 37 of tender documents in pdf form which will be deducted offline while acceptance of tender.
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements