Military Engineer Services Tender

... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Repair/maintenance To Flooring, Plinth Protection, Plastering And Other Connected B/r Works At Trg Area And Ranges At Lansdowne in Pauri Garhwal, Uttarakhand, with an estimated contract value of Rs. 23,00,000. The bid opening date for this tender is 14-11-2026 and the last date for bid submission is 07-12-2026. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Military Engineer Services - MES Tender - Uttarakhand Tender

Opening Date14 Nov 2026
Closing Date7 Dec 2026
Tender Amount₹ 23,00,000 
Notes
Download

Costs

Description

Repair/maintenance To Flooring, Plinth Protection, Plastering And Other Connected B/r Works At Trg Area And Ranges At Lansdowne

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
All as per Item No.03 above but in skirting complete all as specified and as directed.

40

-

-

... More
M&L machine cut kota stone slab as in floor/steps 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete ncl screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:6 including demolition of old slab Complete all as specified and directed.

150

-

-

... More
M&L for 18-20 mm thick Granite slab work (table rubbed and polish) of approved quality of required size in Floor,Wall, Platform ,steps/riser and like bedded and jointed in grey cement slurry and pointed with coloured cement(1:2) using marble dust with admixture of pigment to match the shade of granite stone laid over and including 20 mm thick screed bed in CM (1:4) including granite polish to be done by mechanical grinder including demolition of Stone slabs and tiles of any description or thickness in floors complete all as specified and directed.

15

-

-

... More
M&L for 60 mm thick pre polished rubber moulded coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-35 Grade with grey cement and pigment incl demolition of old tiles complete all as specified and as directed. Note: Shape, size and colour of interlocking paver block shall be as approved by AGE(I).

200

-

-

... More
M&L sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

10

-

-

... More
M&L for chequered cement concrete tiles with grey cement and pigment of size 30cmX30cmX30mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6 including demolition of old tiles complete all as specified and directed.

150

-

-

... More
M& L for 25 mm thick PCC 1:2:4 type B-0, using 12.5 mm graded stone aggregate, including finishing surface of concrete topping even and rough including demolition of cement concrete in ground floor complete all as specified and directed.

650

-

-

... More
M&L PCC 1:4:8 type D-2, using 40 mm graded stone aggregate, including finishing surface of concrete topping even and rough incl demolition omplete all as specified and directed.

22.5

-

-

... More
M&L 75mm cement concrete Type C2 1:3:6 (using 40 mm graded stone aggregate) in plinth protection finishing cement concrete surface even and smooth without using extra cement including joints filled with glass beading including demolition of existing concrete omplete all as specified and directed.

50

-

-

... More
Material & labour for Rendering 10 mm thick CM 1:6 on brick or concrete surfaces finished even & smooth without using extra cement incl taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

100

-

-

... More
M & L for Rendering 15 mm thick in two coats i.e. 10mm thick in CM 1:6 and 5mm thick in CM 1:4 using water proofing liquid compound as per manufacturer's instructions on other than fair faces brick or concrete surfaces and finishing surfaces even & smooth without using extra cement incl taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. .

100

-

-

... More
M & L for Rendering 15 mm thick in two coats i.e. 10mm thick in CM 1:6 and 5mm thick in CM 1:4 on other than fair faces brick or concrete surfaces and finishing surfaces even & smooth without using extra cement complete all as specified and directed. .

50

-

-

... More
M&L preparation of newly plastered surface of External wall by application of 1mm thick wall care putty to remove the dent and to make the surface even and smooth by grinding or rubbing with sand paper and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.

150

-

-

... More
M&L for preparation of newly plastered surface of internal wall by application of 1mm thick wall care putty to remove the dent and to make the surface even and smooth by grinding or rubbing with sand paper and applying two coats of acrylic distemper using roller all as specified and prescribed by manufacture of paint omplete all as specified and directed. Note- Putty shall be measured and paid seperately.

100

-

-

... More
M&L for 1mm thick Acrylic/WaterProofing Wall Putty and surface finished even and smooth with sand paper complete all as specified and directed

250

-

-

... More
S&F fabricating coloured powder coated aluminium frame work door,windows , ventilators, with one or more rebates sections of approved tint as required including beading, cleat, screws,fasteners, plugs, for fixing with wall/ceiling columns/beams etc complete all as specified and directed.

50

-

-

... More
Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) not exceeding 1.5 Sq.m each omplete all as specified and directed.

8

-

-

... More
Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) exc 1.5 Sqm but not exceeding 4.0 Sqm each omplete all as specified and directed.

2

-

-

... More
S&F aluminium coloured power coated door/ window /ventilator shutters, sliding type without sash bar aluminium section weighing 0.55 kg/m including necessary locking arrangement, guide wheels, joining cleats, glazing clips rubber packing anodised aluminium snap beading screws etc complete all as specified and directed.

15

-

-

... More
S&F 4.8 mm thick plain or tinted glass, ordinary quality including rubber gasket for packing and fixed to aluminium Ventilator/window/ incl necessary cutting / moulding and chamferrring of edges for service window/counters complete all as specified and directed.

5

-

-

... More
S & F for Stainless steel wire cloth of 0.36 mm dia wire and average width of aperture 1.40 mm & fixed with tacks of stainless steel wire staples,etc complete all as specified and as directed.

2

-

-

... More
M&L for 4 mm Aluminium Composite Panels (ACP) any colour of for fixing in shutter/partition with all other necessary accessories for fixing complete all as specified and directed.

2

-

-

... More
M&L Brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:4 including demolition of brickwork built in cement mortar including all quoins, arches, pillars complete all as specified.

5

-

-

... More
M & L for walling of random rubble stone masonry but except stones un-coursed, well bonded, bedded, solidly hearted and built in cement mortar 1:6 incl demoliton complete all as specified and directed.

6

-

-

... More
M & L for walling of random rubble stone masonry, un-coursed, well bonded, bedded, solidly hearted and built in cement mortar 1:6 including demolition complete all as specified and directed.

5

-

-

... More
Extra over stone walling for hammer dressing to faces of stone and dressing of faced beds and joints as specified for RR walling uncoursed or brought upto courses hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc 40mm for lime or sand stone complete all as specified and directed.

15

-

-

... More
M&L for raised pointing to RR or Polygon rubble uncoursed or brought upto course in cement mortar 1:4 complete all as specified and directed.

1.5

-

-

... More
M & L for plain cement concrete type B-1, 1:2:4 (using20 mm graded stone agg) in copings, Kneelers, apex stone, bed plate, kerbs including slightly rounded or chamfered angles and throating including demolition of existing concrete complete all as specified and directed.

1

-

-

... More
S&F 1000 ltr capacity rotational moulded polyethylene water storage tanks triple layered white (cylindrical vertical with closed top) hoisted and fixed in position and including 20 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plasttic ball screwed for iron pipe and fixed (Minimum weight 20mm-455gms) including dismantling of water tanks complete all as specified and directed

8

-

-

... More
All as per item no 32 above but 500Ltr complete all as specified and directed

8

-

-

... More
Mirror polishing on old marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish omplete all as specified and directed.

140

-

-



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.