Military Engineer Services Tender
... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Periodical Services Roof Sheet Painting Plastering And Misc Connected Works At Md Accn Lansdowne Under Age(i) Lansdowne in Pauri Garhwal, Uttarakhand, with an estimated contract value of Rs. 26,00,000. The bid opening date for this tender is 14-11-2026 and the last date for bid submission is 07-12-2026. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Military Engineer Services - MES Tender - Uttarakhand Tender
Opening Date14 Nov 2026
Closing Date7 Dec 2026
Tender Amount₹ 26,00,000
Costs
EMD
₹ 52,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Periodical Services Roof Sheet Painting Plastering And Misc Connected Works At Md Accn Lansdowne Under Age(i) Lansdowne
Contact
Tender Id
2026_MES_798709_1Tender No
87349/LDN/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
M&L for raised pointing to RR or Polygon rubble uncoursed or brought upto course in cement mortar 1:4 complete all as specified and directed.
1
-
-
... More
S&F false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm With Semi perforated 12mm thick micro tegular edged or 1 0 mm thick square edged of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC 0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws including dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in Charge.
100
-
-
... More
Material & Labour in repair for ‘E’ board ceiling as in repair, 4 mm thick with GI framed work with main tee of size 24 x 28.5 mm made out of PGI sheet 0.3 mm thick doubled at web and single at flange, flange covered with powder coated sheet 0.25 mm thick and wall angles 24x24x0.45 mm powder coated for ceiling, ceiling board 60cmx60cmx 4.00mm thick, suspended with GI wire 2 mm dia & upto 2 M average length with adjustable device complete incl plugging in brick/stone wall with steel rawl plug & 600 mm C/C. Ceiling board shall be pressed to the ceiling tee), including dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed incl making good all the disturbed portion.
150
-
-
... More
Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) not exceeding 1.5 Sqm each complete all as specified and directed.
50
-
-
... More
S&F fabricating coloured powder coated aluminium frame work door,windows , ventilators, with one or more rebates sections of approved tint as required including beading,cleat, screws,fasteners, plugs, for fixing with wall/ceiling columns/beams etc complete all as specified and directed.
100
-
-
... More
S&F aluminium coloured power coated door/ window (sliding type)/ventilator shutters without sash bar aluminium section weighing 0.55 kg/m including necessary locking arrangement, guide wheels, joining cleats, glazing clips rubber packing anodised aluminium snap beading screws etc complete all as specified and directed.
75
-
-
... More
S&F 4.8 mm thick plain or tinted glass, ordinary quality including rubber gasket for packing and fixed to aluminium Ventilator/window/ including necessary cutting / moulding and chamferrring of edges for service window/counters complete all as specified and directed.
37.5
-
-
... More
S & F for Stainless steel wire cloth of 0.36 mm dia wire and average width of aperture 1.40 mm & fixed with tacks of stainless steel wire staples etc complete all as specified and as directed.
18.75
-
-
... More
M&L for glazed ceramic white tiles of size not less than 450x300x7/600x300x7 mm thick as on vertical surfaces such as wall set and jointed in neat cement slurry and pointed with coloured cement to match over and including 10 mm thick backing coat on fair faces of brick work in CM 1:4 including dismantling wall tiling and cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and as directed.
50
-
-
... More
M&L for Non- skid white ceramic tiles 7 to 8mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sq. m in floos etc set and jointed in neat cement slurry and pointed in white or coloured cement to match , over and including 15 mm thick screed bed in cement and sand mortar 1:6 including dismantling floor tiling and cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and as directed.
10
-
-
... More
M&L for Light Shade Virified Ceramic tiles 10 mm thick polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor etc including 15 mm thick screed bed in CM 1:6 Set and jointed in neat cement slurry including dismantling floor tiling and cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and as directed.
100
-
-
... More
All as per item 14 above but as in skirting/vertical surface including 10 mm backing coat on fair faces of brick work in CM 1:4 complete all as specified and as directed.
5
-
-
... More
M&L Virified Ceramic tiles light shade 10 mm thick polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in CM 1:6 Set and jointed in neat cement slurry including dismantling floor tiling and cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and as directed.
100
-
-
... More
All as per Item No. 16 but 10 mm thick backing coat on fair faces of brick work in CM 1:4 in skirting complete all as specified and as directed.
5
-
-
... More
M&L for 60 mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-35 Gde of approved shape, size and colour conferming to IS 15658-2006 and including joints filled with sand and stone dust as in levelling course of interlocking complete including 50mm sand cushioning including demolition of Stone slabs and tiles of any description or thickness in floors complete all as specified and as directed.. Note: Shape, size and colour of interlocking paver block as approved by AGE(I)
250
-
-
... More
M&L for chequered cement concrete tiles with grey cement and pigment of size 30cmX30cmX25mm thick ,set jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6 including demolition of Stone slabs and tiles of any description or thickness in floors complete all as specified and as directed
400
-
-
... More
Demolition of cement concrete in ground floor and paving not exceeding 15cm thick ( below or above ground level ) complete including removal of debries out side MoD land complete all as specified and as directed.
12.38
-
-
... More
M& L for 25 mm thick PCC 1:2:4 type B-0, using 12.5 mm graded stone aggregate, including finishing surface of concrete topping even and rough complete all as specified.
105
-
-
... More
M&L for 75 mm thick PCC PCC1:4:8 type D-2 using 40mm graded stone aggregate as in sub base of floor etc complete all as specified and directed
130
-
-
... More
Material & labour for Rendering 10 mm thick CM 1:6 on brick or concrete surfaces finished even & smooth without using extra cement including taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc and removing unserviceable material,outside cantt area distance not exceeding 1.5 KM complete all as specified and directed.
250
-
-
... More
M & L for Rendering 15 mm thick in two coats i.e. 10mm thick in CM 1:6 and 5mm thick in CM 1:4 using water proofing liquid compound as per manufacturer's instructions on other than fair faces brick or concrete surfaces and finishing surfaces even & smooth without using extra cement including taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc and removing unserviceable material,outside cantt area distance not exceeding 1.5 KM complete all as specified and directed Note :- Water proofing liquid compound shall be measured and paid separately.
200
-
-
... More
Supply only liquid water proofing compound ISI marked complete all as specified and directed.
3.41
-
-
... More
M&L preparation of newly plastered surface of External wall by application of 1mm thick wall care putty to remove the dent and to make the surface even and smooth by grinding or rubbing with sand paper and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.
200
-
-
... More
M&L for preparation of newly plastered surface of internal wall by application of 1mm thick wall care putty to remove the dent and to make the surface even and smooth by grinding or rubbing with sand paper and applying two coats of acrylic distemper over a coat of primer using roller all as specified and prescribed by manufacturer of paint and as directed at site by Engineer-in-Charge.
250
-
-
... More
Material & Labour for preparation of old surface of internal wall and applying two coats of oil emulsion distemper over putty (if required) make the surface even and smooth of all as specified and prescribed by manufacturer of paint complete all as specified and directed. Note- Putty shall be measured and paid seperately.
500
-
-
... More
Material & Labour for preparation of old surface of external wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over one coat of putty (if required) complete all as specified and directed. Note- Putty shall be measured and paid seperately.
500
-
-
... More
M&L for preparation of old decorated surfaces of wall by removing existing putty/distemper till plaster level and applying two coat of water proofing coating and subsequent application of 2 Coat of Oil emulsion Distemper over a coat of 2 mm Acrylic/Water Proofing Wall Putty(each Coat not less than 2mm) complete all as specified and directed. Note-1.Apply first coat of water proofing (no dilution) & allow it to dry for 6-8 hrs. 2.Apply 2nd Coat of water proofing (no dilution) perpendicular to first coat & allow it to dry for 6-8 hrs.
50
-
-
... More
M&L for preparation of old decorated surfaces of wall by removing existing exterior acrylic emulsion paint till plaster level and applying two coat of water proofing coating and subsequent application of 2 Coat of acrylic emulsion paint complete all as specified and directed. Distemper over a coat of 2 mm Acrylic/Water Proofing Wall Putty(each Coat not less than 2mm). Note-1.Apply first coat of water proofing (no dilution) & allow it to dry for 6-8 hrs. 2.Apply 2nd Coat of water proofing (no dilution) perpendicular to first coat & allow it to dry for 6-8 hrs.
50
-
-
... More
M&L for 2mm thick Acrylic/WaterProofing Wall Putty in two coats (each coat not less than 1mm) and surface finished even and smooth with sand paper complete all as specified and directed
500
-
-
... More
Dismantling of timber scantlings 40 sq cm and over in section in un-framed work complete all as specified and directed.
0.1
-
-
... More
M&L for second class hard wood as in scantling, fixed in framed work clean sawn complete all as specified and directed
0.1
-
-
... More
S&F for 20 mm thick 2nd class hard wood boarding planed one side with butt joints and fixed with nails as in roofs, ceiling partition fascia, barge soffit etc (except flooring and skirting) including dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.
50
-
-
... More
M&L preparation of new wood and wood based surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed
50
-
-
... More
Dismantling of Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings etc complete all as specified and as directed.
357.5
-
-
... More
S&F 0.50 mm thick (including coated thickness) pre-colour pre- profiled (Galvalume) corrugated sheets of required colour and design having tensile strength of 550 Mpa as in roof sheeting/sunshade/ wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap complete all as specified and as directed.
325
-
-
... More
S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick (ISI Marked) of any colour having tensile strength of 550 Mpa as in roof covering/ ridge, valey gutter fixed with self tapping screws complete all as specified and directed.
32.5
-
-
... More
M&L in for MS steel Hollow ,Joist, channel, angle, tee or tubular Section work in tubular trusses, purlins, rafter, tubuler column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washer etc, complete using ERW or induction butt welded tubes conforming IS-1161-1979 grade ST-240 complete all as specified and as directed.
1300
-
-
... More
M&L preparation of newly steel surfaces, of any description, over 10 cm width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed
65
-
-
... More
S&F 18 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of single side rigid laminate of approved color and other side plain white colour fixed with ss screws ans solvent cement/ adhesive to make kitchen cabinet shutters complete as per manufacturer’s instructions include taking down existing boarding complete all as specified and directed
89
-
-
... More
S&F Piano closing hinges openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position all as specified and directed.
20
-
-
... More
S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete fixed in position complete all as specified and directed
10
-
-
... More
M&L for preparation of old painted surface of CGI/PGI sheets, steel material of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
50
-
-
... More
M&L for preparation of old painted surface of CGI/PGI sheets, steel material of any description over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed.
50
-
-
... More
M&L preparation of old wood and wood based painted surfaces of any description not other wise described over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed
50
-
-
... More
M&L preparation of old steel painted surfaces, of any description, over 10 cm width or girth, and applying one coats of synthetic enamel paint complete all as specified and as directed
50
-
-
... More
M&L for preparation of old concreate/PCC tile surfaces by brooming with coir/wire brushes and wahsing down with water to remove the fine dust and applying two coats of Lacquer polish (1001) chemical with pigment as approved by AGE(I) complete all as specified and directed.
90
-
-

