Military Engineer Services Tender

... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Spl Repair To Roads At Almora Mil Station in Almora, Uttarakhand, with an estimated contract value of Rs. 60,10,000. The bid opening date for this tender is 22-10-2026 and the last date for bid submission is 17-11-2026. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Military Engineer Services - MES Tender - Uttarakhand Tender

Opening Date22 Oct 2026
Closing Soon17 Nov 2026
Tender Amount₹ 60,10,000 
Notes
Download

Costs

Description

Spl Repair To Roads At Almora Mil Station

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
M & L for repair to potholes any depth, any size including sweeping from dust & mud or water securing sunken surfaces in roads etc cutting around edges to at least 25mm in depth but making good by filling in screened & graded road metal, watering and well rammed (including supply of premixed macadam, binder and chippings/ road metal) depth of potholes exc 30mm complete all as specified & directed.

20

-

-

... More
M&L for Scarifying or picking gravelled macadam or bituminous macadam surfaces in area not exc 400 sqm exc 50mm and n exc 100deep complete all as specified and directed.

80

-

-

... More
M & L for 75 mm thick (compacted thickness) WBM with broken stone coarse aggregate (lime stone/sand stone/flint/quartzite etc.) of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required with a power roller, 8 to 12 tonnes to form a true surface complete all as specified and as directed.

80

-

-

... More
M&L for applying evenly a priming/tack coat with bituminous primer (Paving bitumen) VG -10 @ 10 Kg per 10 Sqm on unsurfaced water bound macadam including preparing surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. complete all as specified and directed.

80

-

-

... More
M & L for Premix bituminous, macadam laid/rolled and compacted to required gradient and camber and camber with paving bitumen VG-30 content of 4% by weight of toal mix (consolidated thickness 75mm or less) for correction of undulation/ camber complete all as specified and directed.

120

-

-

... More
M & L for laying hot applied thermoplastic compound (paint) 2.5mm thick including reflecting glass beads incl cost of all materials, labour, machinery, T & P etc required for proper completion of work incl all other charges. Th e finished surfaces to be level, uniform and free from streaks and holes as per MORTH specification No 803 as per IRC. Painting lines, dashes, arrows, letters etc on roads, pavements and the like exc 10cm wide with road marking paint white, golden or yellow complete all as specified and as directed.

450

-

-

... More
M&L for Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level), complete all as specified and as directed by Engr-in-Charge.

272.5

-

-

... More
M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub-base to flooring & apron etc. complete all as specified and directed.

230

-

-

... More
M& L for Factory made, Machine pressed precast concrete interlocking paver block polished rubber moulded any shape and size with grey cement and pigment confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment etc. complete all as specified and directed.

230

-

-

... More
M & L for Sand filling (cushion) under floors/ interlocking tiles or in foundations with clean river sand duly clear of residual, organic and deleterious materials spread evenly to uniform thickness laid over sub base layer including watering and consolidation complete all as specified and directed. (Note: No additional amount shall be paid for overlap).

6

-

-

... More
M&L for providing 100mm thick cement concrete 1:2:4 type B-2 (using 40mm graded crushed stone aggregate) as in floor/road/path, hard standing etc. with and including all necessary form work to divide the area in panels not exc. 9 Sqm each and providing 10 mm thick joints throughout the thickness of road/path duly filled with mastic filling of one part of 85/25 hot bitumen and three parts of coarse sand (by weight) with and including making impression of expanded metal whilst concrete is green complete all as specified and directed.

455

-

-

... More
M&L for providing 100mm thick plain cement concrete 1:2:4 type B-2 (using 40mm graded crushed stone aggregate) finishing surface even and smooth with out using extra cement and spike rolling to surface and including making impression of expanded metal whilst concrete is green as in Path etc. complete all as specified and directed.

92

-

-

... More
M&L for Plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in surface channels and drains including necessary form work, complete all as specified and as directed by Engr-in-charge.

20

-

-

... More
Supply & fixing in repairs cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 or equivalent fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and as directed.

600

-

-



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.