Military Engineer Services Tender

Continued :- No. 03 (iii) 01 No. HMI - 7" Graphical Touch screen display (Make: SCHNEIDER / L&T/ PHOENIX CONTACT) (a). 01 No. RS 485 and 01 No. USB port (b). Serial multilink, USB downloading port (c). Support external data storage on a USB memory stick for storing production data and backing up applications (iv) 01 No. SMPS of 6.5A rating suitable according to panel design. (Make: SCHNEIDER / PHOENIX CONTACT / OMRON) (v) Suitable No. of interposing relays of 220VAC & 24 VDC coil rating and 6 A contact rating. (Make: OEN / OMRON / SALZER /PHOENIX CONTACT) (vi) Suitable No. of relay cards with operating voltage 24VDC, with continuous current of 5A. Card must be of 8 channel & having 8 relays.( UL / ELMAX/ TTPL /PHOENIX CONTACT) (vii) MCB rating 16A, 10A, 6A as suitable according to panel design. (Make:- L&T/ Schneider/ABB) (viii) Illuminiated push button, Indicator lamp, Selector switches as suitable according to panel design. (Make:- Schneider/ESBEE/ABB) (ix) Audio visual alarm indicator as suitable according to panel design. (Make:- Schneider/ L&T /Autonics) (x) Multifunction energy meter (including PF, Current, Voltage etc) (xi) 02 KVA UPS / INVERTER with Sealed Lead Acid Maintenanace free Batteries for powering the panel for a minimum of 30 minutes in case of supply failure.

UPS should have following features:- (a) Charger:- Build in solit state three stage recharge. (b) Display:- LED Display (c) Audible Alarm:- Main Failure Alarm, Battery Low Alarm, UPS Warning, Fault. (Make of UPS/INVERTER: NUMERIC / CYBERPOWER/ MICROTEK) CRCA Enclosure:- Make (UNIVERSAL SWITCH GEAR CONTROL / HOFFMAN / ELDON / TRICOLITE ) Make of the PLC based panel:- (Universal Switch Gear Control Cat. No. U- 753 / PLC /220V AC or equivalent in Adlec/Tricolite/GE Automation)

Supply, Installation, testing and Commissioning of 50 mm dia, single phase, Motor Actuated Butterfly valve with disc material SS - 304, Stem Material SS - 410, Seat EPDM, hand wheel for manual operation and having 05 nos. limit switches for Open / Close condition, valve position indicator and over ride trip. The housing of actuator should be of Aluminium Dicast. The actuator must have planetary gear set to transfer the largest torque in the most compact form. The mounting shall be indirect on valve type. Input Voltage: 230 V, A.C. Designed line pressure: 16 kg/sq cm. In built CPU:- Quad-core 64-bit ARM Cortex A53 clocked at 1.2 GHz Inbuilt 4 USB 2 ports In built Base Ethernet Port In built Micro SD port for loading your operating system and storing data In built wireless LAN and Bluetooth Low Energy The mounting shall be indirect type using specialized extended type arrangement of GI pipe of suitable size/thickness, so that actuator mounting is at least 06 inches above ground level complete all as specified and directed. Make : UNIVERSAL SWITCH GEAR CONTROL Cat No. U-50/16/220V AC/EMERSON/ ROTORK/AUMA

Supply, Installation, testing and Commissioning of 50 mm dia, single phase, Motor Actuated Butterfly valve with disc material SS - 304, Stem Material SS - 410, Seat EPDM, hand wheel for manual operation and having 05 nos. limit switches for Open / Close condition, valve position indicator and over ride trip. The housing of actuator should be of Aluminium Dicast. The actuator must have planetary gear set to transfer the largest torque in the most compact form. The mounting shall be direct on valve type. Input Voltage: 230 V, A.C. Designed line pressure: 16 kg/sq cm. In built CPU:- Quad-core 64-bit ARM Cortex A53 clocked at 1.2 GHz Inbuilt 4 USB 2 ports In built Base Ethernet Port In built Micro SD port for loading your operating system and storing data In built wireless LAN and Bluetooth Low Energy The mounting shall be direct type using specialized arrangement of GI pipe of suitable size/thickness, complete all as specified and directed. Make : UNIVERSAL SWITCH GEAR CONTROL Cat No. U-50/16/220V AC/ EMERSON/ ROTORK/AUMA

Supply, Installation, testing and Commissioning of 100 mm dia, single phase, Motor Actuated Butterfly valve with disc material SS - 304, Stem Material SS - 410, Seat EPDM, hand wheel for manual operation and having 05 nos. limit switches for Open / Close condition, valve position indicator and over ride trip. The housing of actuator should be of Aluminium Dicast. The actuator must have planetary gear set to transfer the largest torque in the most compact form. The mounting shall be direct on valve type. Input Voltage: 230 V, A.C. Designed line pressure: 16 kg/sq cm. In built CPU:- Quad-core 64-bit ARM Cortex A53 clocked at 1.2 GHz Inbuilt 4 USB 2 ports In built Base Ethernet Port In built Micro SD port for loading your operating system and storing data In built wireless LAN and Bluetooth Low Energy The mounting shall be direct type using specialized arrangement of GI pipe of suitable size/thickness, complete all as specified and directed. Make : UNIVERSAL SWITCH GEAR CONTROL Cat No. U-100/16/220V AC/ EMERSON/ ROTORK/AUMA

Supply, installation, testing and Commissioning of 6 Core 1.5sq.mm PVC sheathed PVC insulated copper armoured cable including 20 mm PVC conduit with accesserioes and fixed through clamps. Make: Havells/KEI/Polycab

Supply, installation, testing and Commissioning of 4 Core 1.5sq.mm PVC sheathed PVC insulated copper armoured cable including 20 mm PVC conduit with accesserioes and fixed through clamps. Make: Havells/KEI/Polycab

Supply, Installing,Testing and Commissioning of Ultrasonic Level Transmitter at Sump and overhead tank for measurement of level with following specification:- Range : 0-8 meters Accuracy : 0.5 % minimum Supply Voltage : 24V DC Output : 4-20 mA , 0-10V DC Make: Nivelco / Siemens / Banner

Updating existing PC based master control station. The scope includes:- Services for programming, configuration and customisation of the Smart Station Platform with respect to the Water supply Module as per actual site conditions and requirement of the engineer. (a). Landing Page to depict criritcal paramters viz. - Level of water in all tanks, pump status ON/OFF/FAIL and Water Quality parameters (b). Creation of drop down tabs to monitor the all Pump houses and Remote PLC Panel systems individually (c). Creation of individual PLC Panel wise schematics and layouts for the Water Supply system as per the actual site including display of all relevant parameters viz. Water level, Pump ON/OFF/FAIL status, Valve OPEN/CLOSE/FAIL status (d). Soft keys for remote manual operation of all pumps and motorised valves from the Master Control station. (e). Creation of Day wise Reports for :- (i) Run hours of pumps (ii) Pump / valve operation faliures (iii) Active/Return status of each equipment with date and time. (iv). Configuring notifications, alerts and alarms as per preset logic. (v) Consumption Patterns - Daily, Weekly, Monthly and Annually. MAKE:- Universal Switch Gear Control /Phoenix Contact/L&T

Note: - The contractor has to submit the MOU from OEM in the technical bid itself, failing of the same will lead to rejection of bid in Technical Evaluation of Tender Bid. The successful bidder has to submit a Memorandum of Understanding (MoU) from OEM (i.e. M/s Universal Switch Gear Control) in a non-judicial stamp paper of Rs 10.00 duly notorised with an undertaking stating that execution of all SCADA related items of work shall be carried out under technical support and guidance of OEM.

Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground. ( earth pit not less than 2.25 mtr depth below ground level at any type of strata ) with top edge of the earth plate not less than 1.5mtr below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15cm all around the plate. connected by 25x4 mm GI strip as earth lead by means of brass nuts and bolt, thimbles check nuts, washers including concrete chamber of PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) with fair finish, internal surface of concrete chamber shall be given internal dia 300mm x300mm, 15mm thick plaster in CM 1:4 funnel with wire mesh, RCC pit cover of 320x320x80mm size (1:2:4) Type B1 ( using 20mm graded stone aggregate) rainforced with XPM all as shown in electrical plate No 3 of MES SSR Part-1(2009) and specified including and provision of GI strip upto 7.5 mtrs long with 40 mm dia light grade Gi pipe protection and watering pipe of GI 20 mm bore, medium grade, including all exavation and earth work and connecting the earthing strip to panel, including testing on completion complete all as specified and directed by Engr-in-charge. Note:- (i) RCC pit cover shall be precast of RCC(1:2:4) type B1, 80mm thick rainforced with XPM weighting not less than 4kg/sqm in lieu of CI cover. (ii) Cost of additional GI strip more than 7.5 mtrs will be measured and paid seperately under relevant items.