Military Engineer Services Tender

M&L for applying bituminous premixed semi dense asphaltic concrete 40 mm thick (consolidated thickness) with 5.50% binder of paving Bitumen VG-30 grade, content by weight of total mix including cement filler, on surfaces, rolled compacted with using 8 to 10 tonne capacity power roller to achieve the required compactness, camber and gradient mixed in hot mix plant using design mix and laid by mechnaical paver finisher complete all as specified and directed. NOTE:-(i) The actual binder content used shall be as per optimised content based on approved job mix formula irrespective of what ever indicated in Sch 'A'. (ii) Price adjustment shall be done on MINUS side only @ Rs. 55,000/- per MT (without considering the permissible tolerance on minus side) with reference to binder content indicated in Sch 'A'. (iii) No Price adjustment for Bitumen shall be done for variation on plus side. (iv) Please note that SDAC to be laid immediately after laying of BM. In case the SDAC could not be laid within 48 hours of laying of BM, primer coat @ 3Kg / 10Sqm to applied over freshly prepared bituminous surface and nothing extra shall be paid by the Govt. on this account. No claim what so ever shall be entertained by Govt on this account.

M&L for preparation of existing bituminous surfaces, removing, dust, dirt grease and other foregion matters etc to receive the markign and M&L for thermo plastic (Reflective) line, dashes, arrows, letters etc of following size wide marking, having 2.5 mm thickness (average) of uniform surface finish conforming to BS 3262 (Part 1) 1989 read in conjunction with the MOST specification 803 clause 4.2.2 on bituminous surfaces in white/yelow clour and super imposed with glass beads confirming to BS 6088 read in conjuction with and MOST specification 803 clause 4.3.3 complete all as specified and directed:- Note: - MOST specification 803 shall be followed strictly for execution of work & suitable machine shall be used for the marking as approved by the GE. Shape & size/ patterns of marking shall be as approved by the GE.

width exc 10cm wide.

Demolition of PCC in ground floor and pavings not exc 15 cm thickness below or above ground level including removal of rubbish out side MOD land complete all as specified and directed.

M&L Cement concrete work in Road/Path/ Hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less complete all as specified and directed. Using Cement OPC grade 43 only, Rate to be deemed in the same item for OPC cement. No extra payment shall be made. Note :- (i) The design mix shall be got done from approved lab and got approved from GE/AGE (I) before commencement of work. (ii) In the event of variation in the design mix in the minimum cement content will be adjusted through supply only rate at market rate or procurment rate whichever is more for cement. However no plus adjustment shall be applicable, if excess quantity of cement content is used/ approved in the execution of work under this items. (iii) Required surface texturing to be done as specified in clause 10.1.14 and table 9 of IRC: 15-2017.

M&L forming expansion joints 12 mm wide and thickness of concrete slab 150 mm, filled with pre-formed bituminous filler and top 30 mm primed and sealed with sealing with sealing compound grade 'A' complete all as specified and directed.

M&L for forming Contraction (Dummy) joints 50 mm deep x 10 mm wide , filled with sealing compound Grade A complete all as specified and directed.

M&L for forming construction joints 30 mm deep x 10 mm wide filled with sealing compound grade 'A' complete all as specified and directed.

M&L for 75 mm thick PCC (1:3:6) type C2, (40 mm graded stone agg) as in sub base of floor/ complete all as specified and directed.

M&L for spike rolling to surface or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed.

M&L for 60mm thick coloured rubber moulded glossy finish machine pressed precast concrete interlocking paver block, M-35 Grade with pre-polished, coloured/ laquar finish any shape and size, as approved confirming to IS 15658-2006 with and including over 50 mm thick stone dust/ sand cushining complete all as specified and directed.