Irrigation Department Tender

Providing & laying sal wood work in chaukhat i/c. cost of all materials ,labour and T&P etc. required for proper completion of work as per directed by Engineer-In-charge.

Providing & fixing Mild steel or iron work of small size and sections such as holding down bolts, hold fast,gratings/jali etc. i/c. cost of steel,bolts,nutsand wastage all materials,labour and T&P etc required for proper completion of work as per directed by Engineer-In-charge.

Cement Plaster in 1:4 on brick masonary work with cement, coarse sand including cost of all material, labour and T&P etc.required for proper completion of work as per directed by Engineer-In-charge.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete for proper completion of work as per directed by Engineer-In-charge.

Providing & fixing of flush Door Shutter 32mm. thick commercial quality conforming to I.S.2202 part I (1983) i/c. cost of all materials ,labour and T&P etc. for proper completion of work as per directed by Engineer-In-charge.

Providing & fixing glazed shutters in window second class teak wood with all necessary fittings i/c. cost of all materials,labour and T&P etc. required for proper completion of work as per directed by Engineer-In-charge.

Providing & fixing fly proof wire gauge shutters in door & window with 2nd class teak wood beading 62x19mm with all necessary fittings i/c. cost of all materials,labour and T&P etc. required for proper completion of work as per directed by Engineer-In-charge.

Providing and laying vitrified floor tiles of size 60cm x 60cm in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to iS 15622 of approved make in all colours and shade, colour and facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. for proper completion of work as per directed by Engineer-In-charge.

Supplying & fixing 6mm thick china white glazed tiles in flooring or skirting /dado laid with 1:3 cement and approved coarse sand mortar finished white cement slurry jointing and polishing complete i/c cost of all materials,labour and T&P etc. required for proper completion of work as per directed by Engineer-In-charge.

Finishing walls with Acrylic Smooth exterior paint of required shade old work (two or more coat applied @1.67 litre/10 sqm.) on existing cement paint surface required for proper completion of work as per directed by Engineer-In-charge.

Distempring two coats with oil bound distemper on old surface of approved brand & shade by Engineer-in-charge after thoroughly brushing the surface and preparing the surface by cleaning & repairing with plaster of paris and sand papered smooth also including cost of all materials, labour and T&P etc. required for proper completion of work as per directed by Engineer-In-charge.

Enamel Painting two coats over priming coat on wooden surface of all dirt,dust and other foreign matter,sand papering and stopping i/c. cost of materials and T&P etc. as required for proper completion of work.Paint shall be used as per standard I.S. specification as per directed by Engineer-In-charge.

Providing and applying water proofing treatment to vertical and horizontal surfaces of depressed portion of w.c.,kitchen and the like consisting of(i) 1st coat of applying cement slurry @4.4 kg./sqm. mixed with water proofing compound conforming to IS:2645 in recommended proportions i/c. rounding off junction of vertical and horizontal surface.(ii) 2nd course of 20 mm cement plaster 1:3 (1cement:3coarse sand) mixed with water proofing compound in recommended proportion i/c. rounding off junction of vertical and horizontal surface.(iii) 3rd course of applying blown or residual bitumen applied hot at 1.7 kg/sqm.of area.(iv) 4th course of 400 micron thick PVC sheet (overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm) i/c. cost of all materials,labour and T&P etc. required for proper completion of work as per directed by Engineer-In-charge.

Providing & fixing stainless steel A ISI 304 kitchen sink with drain board size 510x1040 bowl depth 250mm with all necessary fittings etc for proper completion of work as per directed by Engineer-In-charge.

Providing & fixing white vitreous china wash basin of size 660x460mm.with a pair of 15mm. C.P. brass piller taps with elbow and all necessary fittings i/c. cost of all materials,labour and T&P etc for proper completion of work as per directed by Engineer-In-charge.

Providing & fixing CP brass 32mm. Size bottle trap of approved quality & make and all necessary fittings i/c. cost of all materials,labour and T&P etc for proper completion of work as per directed by Engineer-In-charge.

Providing & fixing CP brass 15mm. Nominal dia. single lever telephonic wall mixer of approved quality & make and all necessary fittings i/c. cost of all materials,labour and T&P etc for proper completion of work as per directed by Engineer-In-charge.

Providing & fixing CPVC 25mm. Dia. Pipes,for hot &cold water supply with all necessary fittings i/c. cost of all materials,labour and T&P etc for proper completion of work as per directed by Engineer-In-charge.

Providing & fixing 100mm. dia.trap sand cast iron S&S as per IS:3989with grating including all necessary fittings i/c. cost of all materials,labour and T&P etc for proper completion of work as per directed by Engineer-In-charge.

Providing semi-skilled labour,Mali,sweeper for cleaning naali,grass,jhaari peripheral to offices and residences in canal colony campus i/c. cost of labour and T&P etc for proper completion of work as per directed by Engineer-In-charge.