Indo Tibetan Border Police Tender

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work

Demolishing R.C.C work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer - in - charge.

Demoleshing cement concrete manually/ by mechanical means including disposal of material within 50 meters lead as per direction of Engineer- incharge. Nominal concrete 1:4:8 mix (1 Cement :course sand: stone aggregate 20 mm nominal size)

Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plug setc. wherever necessary complete. 20 mm diameter

Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required 4 Module (125mmX75mm

6 Module (200mmX75mm)

12 Module (200mmX150mm)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Telephone socket outlet

TV antenna socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

SITC of 2 feet x2 feet, maximum 36 watt 6500 k LED type ceiling surface/recess mounded fittings suitable to providing minimum 3600limen output, CRCA steel sheet housing with constant current output driver, suitable for AC supply voltage complete with connection, testing and commissioning etc, as required at site of work.

Designing, fabricating, testing, installing and fixing in position SS industrial modular kitchen (SWG SS 304) with required frame and necessary screw holdingcapacity. Frame shall be fixed to wall using Expendable Fastnerwith necesary stainless steel screws, all complete . Including;- (I) 01 nos Potato cum onion bin for storage ( size 48''x30''x30"), 4 nos Storage rack having 5 shelves for storage ( SIze 44''x20''x60"), 02 nos Storage Rack having 5 shelves for storage ( size 6''x20''x60"), 01 nos Exhaust Hood for Stock Pot Burner at Main kithcer area (size 140''x30"), 01 nos Exhaust Hood for Chapatti Plateat main kitchen area ( size 64"x42"), 02 nos work table with U/S ( size 44"x24X34"+6"), 01 nos Two sink unit for pot wash area( size 44"x24X34"+6"), 1 job work for S.S drain trough with grating ( size 12"x12"x3"), 06 nos storage rack having 5 shelves (size 44x20x60"), 06 nos SS storage bin ( size 18x24x24"), 02 nos clean dish rack (size 44x20x60"), 968 sequre feet GI ducting sheet (Size 44x20x60") and 01 nos 28" axial fan etc. (ii) The existing modular kitchen accessories will be used and installed along with the SS industrial modular kitchen (SWG SS 304) with the required frame and necessary screw-holding capacity, as per the prescribed drawing and under the direction of the engineer-in-charge. the detail is under :- 01 nos chest freezer (free size as availabe), 01 nos refrigerator ( size 52x30x84"), 02 nos Masala Trolley (Size 27x30x34"), 03 nos stoc Pot burner ( Size 24x24x24'), 01 nos Capatti Rolling Table (Size 60x30x34") 01 nos Chapatti Bhatti (Size 130x85x85 cm) , 01 nos Dough Keader ( free size as avaialbe), 01 nos Mixer Grinder ( free size as availabe), 01 nos Potato Peelar ( capacity up to 20 kg), 01 nos Pulveriser (3HP Capacity) The Contractor shall provide SS modular kitchen having all the performance characteristics all complete , as per the drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual work done (including width of groove) shall be measured complete job.