Indian Institute Of Technology Tender

Providing & Fixing 100A, 16 KA, rating and breaking capacity TPMCCB in existing cubical panel board including drilling holes in cubicle panel, making connection etc. as required.

-do- but 250A, 35 KA

Supply and Fixing 40 to 63A TPMCB 10 KA 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

SITC of three phase fully automatic star-delta starter for 45-50 HP submersible pump motor in sheet enclosure AC-3 duty, 415 volt, 50 Hz, 3 phase, relay range 45-75 Amp with overload, single phasing, phase reversal, phase imbalance etc. and with timer.

SITC of three phase fully automatic star-delta starter for 10-15 HP submersible pump motor in sheet enclosure AC-3 duty, 415 volt, 50 Hz, 3 phase, relay range 13-22 Amp with overload, single phasing, phase reversal, phase imbalance etc. and with timer.

Supply & Fixing of 4 x 25 sq mm PVC insulated PVC Sheathed aluminium conductor armoured cable working voltage upto and including 1100 V confirming to IS 7098 (Part-I) in following manners i/c connections etc on surface as required. (Make - Havells / Polycab).

SITC of 100 mm dia MS pipe class "C" conforming to IS-1239 with all accessories like all fittings including tees, elbows, reducers, flanges, rubber gaskets, nuts bolts, washer as required for welded joints and fixing the pipe on floor / wall /ceiling with suitable size clamps, fasteners. Complete in all respects.

Replacement of existing damage first aid hose reel drum with MS construction spray painted in post office red, manual swing type fire hose reel ISI marked as per IS: 884 with up to date amendments complete with 20 mm (nominal internal) thermoplastic hose pipe (Type-II) 30 mtr. Long, dia 20mm, ISI marked IS: 12585 with ABS SS shut off nozzle complete in all respect.

Replacement of existing damage single headed external yard hydrant valve with 1 No 63 mm dia instantaneous FM Gun metal coupling and cast iron wheel, ISI marked confirming to IS 5290 (TYPE A) with blank PVC Cap and chain as required.

Supplying installation testing and commissioning of 63 mm dia. 15 Mtrs. long RRL hose pipe ISI Marked conforming to IS: 636 (Type-A) with 63mm dia. Male and female stainless steel couplings confirming to IS: 903 duly ISI Marked, duly binded with S.S. Wire, rivets etc. as required.

SITC of BUTTERFLY VALVE (MANUAL) with C I body SS disc nitrile sheet & O - ring & PN 16 pressure rating.

100 mm dia

80 mm dia

SITC of NON - RETURN VALVE with dual plate of C I body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating.

100 mm dia

80 mm dia

Replacement of existing damage cast iron non rising spindle double flange sluice valve size 150 mm dia suitable for pressure 15 Kg/Sqcm. with flanges, nut bolts & gaskets complete required.

Repairing & servicing of existing first aid hose reel, wall mounting swinging type complete with drum & bracket of MS construction, spray painted in Post office Red, confirming to IS 884/1995 with upto date amendments complete as required.

Repairing & servicing of existing first aid hose reel, wall mounted swinging type complete with drum & bracket of MS construction, spray painted in post office red complete as required

Providing and fixing of 2 mm thick aluminium base photo luminescent signage with UV protection size 150 mm x 300 mm complete as required.

Providing and fixing of dial type pressure gauge with isolation cock and pipe at hydrant station 100 mm dia calibration 0-10 Kg.

Providing & Fixing of Powder Fire Extinguisher (Stored Pressure type) capacity 6 kg duly ISI marked conforming to IS: 15683, ABC powder complete with squeeze grip release valve, discharge pipe, locking arrangement, pressure gauge, operation manual, bracket with two screw and sleeve.

S/F of fire extinguishers Co2 type 4.50 kg capacity (ISI marked IS: 2878 & TAC approved) complete with initial charge & wall bracket, along with supply of all material and labour for proper completion of work.

Repairing of existing microprocessor based fire alarm main control panel with 250 watt amplifier PA system operating on 230 V, 50 Hz with visual and audio indicators of short circuit, fault, open circuit fault, fire conditions, feather touch switch suitable to operate on 24 V DC with power supply & battery charger i/c replacement of zone card complete with all connections as reqd. (Fire Alarm Main Control Panel)

Replacement of existing defective manual call boxes of MS construction to compatibility of existing system i/c testing as required.

Replacement of existing defective electronic medium density LMT hooter / sounder of MS construction to compatibility of existing system i/c testing as required.

Rewinding, repairing & servicing of main fire fighting pump (electric driven pump with motor & diesel engine driven-pump only) 2280 LPM, 70 Mtr head including dismantling from the installed location & varnishing of main motor, alignment of pump after replacement of mechanical seal, gasket etc. complete as required.

Refilling of existing fire extinguishers water co2 type 9 ltr capacity - 24 Nos & ABC type - 5 Kg. complete with labour for proper competition of work

Refilling of existing fire extinguishers Co2 type 4.5 kg capacity complete with labour for proper competition of work.

Providing & placing on terrace (at all floor levels) polyethylene water storage tank, as per IS: 12701 with cover and suitable locking arrangement and making necessary holes for inlet, outlet, with fittings and overflow pipes but without base support for tank (The civil foundation / base shall be provided by the department)

Supplying, installation, testing & commissioning of main control and indicating panel made out of 16 SWG MS sheet to accommodate the following items duly powder coated in approved colour with louvers for ventilation, locking arrangement, audio and visual indication for fire alarm and public address system, monitoring system including connections, interconnections etc complete as required. 10 Zone panel for fire alarm system 250 Watt amplifier racks suitable for operation on 230V AC/24V DC supply conforming to IEC-268-3 complete with all accessories as required amplifier 1 No operation on 230V AC/24 V DC supply conforming to IEC-268. Announcement control desk suitable for selection of different zones selectively and ON ALL CALL switch with visual indication etc. complete as required -1 set. Amplifier -1 No. Monitor panel for loudspeaker complete with output selector, ON/OFF switch, fuse, visual indications etc. Complete as required- 1 No. Gooseneck microphone with stand and ON/OFF switch- 1 No. Main ON/OFF switch, fuse indication lamps, DC and AC voltmeters & ammeters, terminal blocks etc. complete as required -1 set. Battery charger trickle cum boost to take complete load of fire alarm & PA system complete with all accessories including providing & fixing of 2 nos.12 volt, 7 AH each sealed maintenance free batteries -1 set.

Testing & commissioning of complete firefighting & fire alarm system installed at 02 nos. of buildings i.e. Academic Block & Hostel Block will be in the scope of the bidder.