Indian Institute Of Technology Tender

Supplying and fixing 5/6 amps modular type switch on existing modular type plate & switch box including connections but excluding modular plate etc. as required.

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface or in recess, including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection, painting etc. as required.

Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 15/16 & 5/6 amps modular socket outlet and 15/16 amps modular type switch, connection, painting etc. as required..

Supplying and Wiring for circuit/ submain line with 2x2.5 mm² FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit ISI 16 gauge along with 1 no 2.5 mm² FRLS PVC insulated copper conductor single core cable for loop earthing as required.

.....do..... but 2x4 mm² + 1x4 mm² earth wire

.....do.....but 4x6 mm² + 2x6 mm² earth wire

.....do..... but 4x10 mm² + 2x6 mm² earth wire

Supplying and drawing 2 x 1.5 sq mm sizes of FRLS PVC insulated copper conductor, single core cable in the exisiting surface/ recessed steel/PVC conduit as required with connection complete.

.....do..... but 3 X 2.5 sq mm

.....do..... but 3 X 4 sq mm

.....do..... but 3 X 6 sq mm

.....do..... but 2 X 10 sq mm

Supplying and fixing of 8-way, double door prewired SP&N MCB distribution board of steel sheet for 240 volts on surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

Supplying and fixing 8 way (4+24), double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

Supplying and fixing 5 amps to 32 amps rating single pole, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

.....do..... but 5 to 32 amp TP MCB

.....do..... but 40 to 63 amp TP MCB

.....do..... but 5 to 32 amp 4P MCB

.....do..... but 40 to 63 amp 4P MCB

Supplying and fixing 25 amps rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.

….do….but 40 amps DP RCCB

Supplying and fixing 25 amps rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 40 amps rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Providing and fixing 125 amp, 36 KA, rating and breaking capacity 4P MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required.

.do…..but 250 amp 36 KA MCCB

SITC of 4 Pole Automatic Motorised Changeover/ Automatic Transfer Switch (ATS) rating 125 amps in existing cubical panel complete with all accessories cubucal panel complete with all accessories, mounting arrangements, busbar/ cable links, connections etc as required in all respect

Removal / Fixing off size, SPN type sheet steel, MCB distribution board, 230 volts, on surface/ recess, complete with connection, repairing etc. including earthing etc. as required. (But without MCB/RCCB/Isolator)

Removal / Fixing off size, TPN type horizontal / Vertical, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with connection, repairing etc. including earthing etc. as required. (But without MCB/RCCB/Isolator)

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, Service Value not less then 7, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance minium 2 mega ohm,suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

SITC of 2'x2' fully diffused recess/surface mounting LED luminaire, minimum 3600 lumen as light source, suitable for Armstrong/Grid Ceiling complete as required includung all connections equivalent to Havells no. VENUSNEO2X2PLR36WLED857STTR.

SITC of LED light fitting 600mm length minimum 1000Lumen with mounting rail box / aluminium extruded Batten suitable for surface, wall and conduit mounting with acessories and prewired with both side end cap equivalent to Havells Cat no. LUMILINE+BS10WLED865SPCSS.

SITC of LED light fitting 1200mm length minimum 2000Lumen with mounting rail box / aluminium extruded Batten suitable for surface, wall and conduit mounting with acessories and prewired with both side end cap equivalent to havells cat no. LUMILINE+BS20WLED865SPCSS.

SITC of Round recess/surface mounted LED slim/sleek down light fitting with LED Driver minimum 1000 lumen suitable for Armstrong/Grid ceiling equvilant to Havells cat no. EDGEPRONEORDDLR 12WLED857S. Minimum Two years warranty should be provided and certificate should be endorsed by OEM or his representative

SITC of LED light fitting BED Side Lamp with acessories and prewired equivalent to Havells Cat no. LEDREADELUX Bedside Light 4W Cir. White

SITC of Sensor LED tube fitting equivalent to Havells Cat No. LUMILINESMART20WLED865PCWH with built in motion sensor and necessary arrangement to reduce to 30% in case of no occupancy or motion but instantly go to full light i.e. 18-20 watt as soon as some motion observed, complete with connection as required. Minimum Two years warranty should be provided. Warranty certificate should be endorsed by OEM or his representative.

SITC of LED light fitting 1200mm length minimum 2000Lumen with mounting rail box / aluminium extruded Batten suitable for surface, wall and conduit mounting with acessories and prewired with both side end cap equivalent to Wipro cat no. DE12065. Minimum Two years warranty should be provided.

SITC of LED foot/ skirt light fitting 02-5W

S/F od call/ Door bell

Supply, erection, testing and commissioning of factory fabricated metal clad dust and vermin proof- floor mounted 500A cap 440 V, 50 HZ,3 phase and neutral electric feeder pillar single/ double door 400 mm depth duly powder coated spray painted with separate chamber for instruments (e.g. ampere meter, volt meter, frequency meter, KWH meter etc.) & switch gears (like I/C & O/G MCB's/MCCB's, C/o switch with extentionable/rotary handle etc.). The feeder pillar/ panel shall have 500Amp, 415V TPN electrolyte aluminium bus bar as per IS 8623 insulated with heat shrink sleeve and mounted on nonhygroscopic supports with detachable side with hinge and locking. The switches shall be completed with lug and cable gland of suitable size of cables with connection as required. The feeder pillar should be made with 2 mm CRCA sheet. The feeder pillar should be fixed on M.S. channel 75mm X 40mm X 6mm size and mounted on M.S. angle iron 50mm X 50mm X 5mm size frame 450mm height with cross support completed as per direction of site in charge. The panel shall be comprised of indicator and feeder nomenclature as per direction of site-in-charge.

Supplying and fixing of Digital Ammeter equivalent to Make: Secure & Model DPM I310 in existing panel/DB complete with all connections, testing and commissioning etc as required.

Supplying and fixing of Digital Voltmeter equivalent to Make: Secure & Model DPM V310 in existing panel/DB complete with all connections, testing and commissioning etc as required.

SITC of tap wound and ring type Current Transformer (CT) ratio (100/5-600/5). Accuracy Class: 0.5, burden 5VA complete with all accessories and connections including all mounting accessories in all respect.

SITC of Panel Mounted Earth Leakage Relay (ELR) 240-415VAC/DC, 1 C/O (Pre Alarm) +1 C/O (Fault) current setting range 30mAmp- 30Amp equivalent to L&T make & cat no. 17K726QF4N complete with making suitable size cut out including mounting acessories and all connections as required.

SITC of moulded case CBCT oval/ circular size 92 mm minimum ID (Internal Dia), current setting range 30 mAmp- 30 Amp equivalent to L&T make & cat no. 17H7NNTN3, complete with mounting acessories and all connections as required.

SITC of Shunt relese compatible with existing TP/FP MCCB equivalent to L&T make & cat. No. CM97883OMOO, complete with mounting acessories and all connections as required

S/F of 15 Amps Plug top ISI marks complete with PRCD in all respect