Indian Council Of Forestry Research And Education Tender

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm)

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :250x10 mm

Providing and fixing aluminium pull bolt lock, ISI marked, anodised(anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws bolts, nut and washers etc. complete.

Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868)transparent or dyed to required colour and shade with necessary screws etc. complete. Twin rubber stopper

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm) with necessary accessories and screws etc. complete.

Steel work in built up tubular trusses including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete.Hot finished welded type tubes

Providing and fixing armstrong prima adria microlook ceiling edge miniral fibre ceiling tile in tru horizontal level false grid manufecture by m/s Armstrong world Industries or equivelent using hot dipped chamically cleaned cappingprefinished in baked polyster paint, armstrong main t size 30×15 mm.every 1200mm C/ C maximum and rotar stiched and 600 mm armstrong cross tea at every 1200 mm C/C maximum and armstrong wall angle alround the wall to form grid size of 600×600 mm.and suspending the grid using 2mm prestraightened G.I. rod / wire and 8mm. dia anchor fasterners at every 1200mm intervals at the main tee and laying armstrong prima adtia microillok edge mineralfiber ceiling tiles of size 600×600×15 mm over the formed grid including providing necessary openings and additional framework required for light fittings etc. manufactured by M/S armstrong world industries having fire rating of 60 minutes as per BS 476/23 of 1987 .light reflection of 85%, noice reduction Co-efficient (NCR) of 0.50 sound attenuation of 32 db k= 052-067 W/m K weight of 4.0 kg./ sqm and humidity resistance of 95%. The work shall be execated engineer incharge.

Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300mm or more (thickness to be specified by the manufacturer), of 1stquality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4(1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : External work 15 mm dia. nominal bore

Providing and fixing 110 mm PVC nani trap as per direction of Engineer in Charge.

Providing and fixing towel rail complete of approved quality and colour. (Jaquar make)

Providing and fixing tissue paper holder complete of approved quality and colour. (Jaquar make)

Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore

Making hole up to 20x20 cm and embedding pipes up to 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)including disposal of malba.

P/F and fixing looking mirror of approved quality and size with desired design as per direction of Engineer in charge.

Providing and fixing wall hanging one single piece EWC approved brand with lid and Cistern including all the necessary fittings etc as per direcion of Engineer in charge. (Make Somany/Jaquar)

Providing and fixing vanity washbasin cabinate with white granite stone. As per direction of Engineer-In-Charge.

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design : 150 mm diameter S.W. pipe

Providing and Laying 100 mm dia PVC pipe as per direction of Engineer in Charge.

Providing and Laying 150 mm dia PVC pipe as per direction of Engineer in Charge.

Cleaning and repairing of old man holes as per direction of engg-in-charge

Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Circular tank

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 15 mm nominal bore

Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 15 mm nominal bore, 105 mm long. Weighing not less than 138 gms.

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore

Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 15 mm nominal bore. Weighing not less than 32 gms.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Removing white or colour wash, water proofing cement paint and and the like by scrapping, sand papering and the surface smooth including necessary repairs to scraches etc. complete.

12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)

Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade :Old work (one or more coats) .

S/F of exhaust fan as per direction of engineer-in-Charge.

M/F of power point as per direction of engineer-in-Charge.

S/F of 2x2' led square light as per direction of engineer-in-Charge.

S/F of mirror light as per direction of engineer-in-Charge.