India Optel Limited Tender

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section(not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of26 mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to Centre, Complete with suitable arrangement for hanging with GI rod or wire including fastners.

S&F 4 mm thick Non asbestos fibre cement building ( E board) boards fixed or laid/ inserted to GI framework.

Demolition cement concrete surfaces in ground floors and pavings n exc 15 cm thickness (below or above ground level).

Spreading and levelling of demolished material in layers n exc. 25 cm thick and well ramming including watering as required

M & L 75 mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate)

Screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes

S&F Virified Ceramic tiles in light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors / skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floors & skirting.

Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories, 5 mm thick plain sheet glass complete with prviding & fixing of all fitting accesaries reqd. including all items mentioned in item.

Supply and fixing factory made uPVC white colour fixed glazed ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (with 4 mm thick sheet glass).

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces with smooth finish including waterproofing without using extra cement.

S&F Framed work such as grills, gratings, etc. ( including fixing with provision of fastner) with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work.

S&F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing.

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides

S & F 100 mm Butt hinges, medium , cold rolled mild steel, and fixed

S&F 150 mm Aluminium handles, cast type, anodised.

S&F Aluminium locking bolts, anodised, with bolt not less than 10mm dia, 250 mm size

S& F 250 mm Aluminium alloy, anodised, sliding door bolt ( for locking ) with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S& F 150 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed.

S& F Door closer aluminium body hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

S&F 140 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor

Preparing old /new surfaces plastered and applying / touch up two coat of oil emulsion on walls & ceilings with putty/primer as reqd.

Preparing old /new surfaces plastered and finishing walls / touch up with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work/old (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) Make:- Water proof paint Apex (Ultima) Asian/ Dulux weathermax/ Nerolac

Preparation of new surface / old treated surface and applying two coat synthetic enamel paint (ordinary tint) over one coat of zinc chromate primer over wooden surfaces.

Preparation of new surface steel surface and applying two coat synthetic enamel paint (ordinary tint) over one coat of red oxide primer.

Removing building materials etc. to a distance up to 500 metres or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination.

Credit (-) old/unserviceable dismentled wooden windows/ doors with or without frames except grills / welded mesh jali etc.

Credit (-) old/unserviceable dismentled steel window frames/grills / welded mesh jali etc.