Haridwar Roorkee Development Authority Tender

Supplying, fitting and placing TMT bar reinforcement (Fe 415) in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202

Supply Installation Testing commissioning and five year warranty with comprehensive maintenance of complete solar (semi intregrated) street light led system inclushive Dia cast aluminium,ip65 30Watt (c.p) MPPT CCU Liminium with inbuilt Li-Fe Po4,12.8 volts, 30AH Battery and LED lumen efficancy 150Lm/watt. 120Wp 17V solar PV Moudule. Spv structure base plate and J bolts as per required and Drawing. Total hight of the decorative pole with single arm bracket will be 4000mm nominal above the ground .The pole is made out of grooved mild steel tube.as per diamensions shown in the drawining....The size of the base plate will be 250x250x10mm.The different section of the pole are joined together by means of flanges and wellded Joints. A cast iron embllsishment is fitted at the joint of two section enhance the look of decorative pole. A cast aluminium kalash shaped embellishment is also fitted on the pole as shown in atteched drawing.The bracket will be fitted on the top of the pole as showing in drawing.with help of grub screws,the decorative bracket arm is made out of mild steel tube.The mild steel pole,cast iron emblsishment are joined togather and are fabricated to get the desired design as par drawing,the decorative bracket will have the arrangement to fix required. luminaries. The bracket will have the arrangment suitable to be fitted on the required pole. THe attechment to fix solar panel and suitable box the place battery is made at the top of pole as per attached drawings. The dimensions of the pole and bracket will be as par drawing.The decorative pole single arm bracket and solar panel attachment shall be duly pre treted buy short blasting process and painted in two coat of opoxy primar top coat of UV rey resistant poly urethene coating approved coller shed. The DFT of coating on pole &Bracket shall not be less then 90 microns.The Coating on the LED street light shall be baked in oven at required temperature and parameters all complete accessories.