Haridwar Roorkee Development Authority Tender

Supply Instalation testing & commissioning of LED Pixel DOT for Media Facade lighting, Power: 1.4W per pixel,Operating voltage: 12V/ 24V, Source: 2RGB + 1W, Diffuser: Milky white, Housing: Engineering plastic, IP rating: IP66, Installation: Mounting seat/ Steel wire/ Front clips (Included), Control: SPI/ DMX512; Lumen maintenance of at least L70@50,000 burning hours at 35°C. Ingress Protection ≥ IP 67. Impact resistance level ≥ IK 07. Adequate heat sink with proper thermal management shall be provided. Operating Temperature : ‐ 30 °C to +45 °C, Operating Humidity : 10% ‐ 90%. THD should be less than 10%. SITC work including all theconnectors, jumper cables, accessories, complete anti-theft mounting mechanism, as approved by the department.

Supply Instalation testing & commissioning of DMX controlled 3-Bar, LED Flood Light Fixture, Power: 150W per module; Operating voltage: 24V, CCT: RGBW, Beam angle: as per site requirement, Housing: Die-cast/ extruded aluminium with separate compartment for driver/ decoder, IP rating: IP67, IK rating: IK07, Surge Protection: 2KV-4KV, Control: DMX512 (4Channel) Color rendering index CRI ≥ 80 for white LEDS's and power factor of complete luminaire ≥ 0.90, at full intensity. Luminaire should be provided with suitable integral/separate non‐integral power supply unit. Lumen maintenance of at least L70@50,000 burning hours at 35°C. Adequate heat sink with proper thermal management shall be provided. Operating Temperature : ‐ 30 °C to +45 °C, Operating Humidity : 10% ‐ 90%. THD should be less than 10%. Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements. The fixtures proposed must have passed LM 79 & LM‐80, Reports from NABL laboratory. The fixtures must be BIS Certified. Soft copy of IES file should be submitted along with bid. SITC work including all theconnectors, jumper cables, accessories, complete anti-theft mounting mechanism, as approved by the department.

SITC of high quality Supply Instalation testing & commissioning of Homogeneous LED Flexible Linear Light Wattage 14-16W with high quality circuit design for stable and reliable performance, surface material should be made of Silicon with aluminium extrusion linear profile and other connecting accessories, Surface mounted flexible linear light suitable for facade edge lighting, Symmetric distribution. luminaire should have diffuse silicone based cover for soft illumination. Rated input supply of DC 24V constant voltage with external LED Driver, External ballast as accessory must be provided separately, Output color should be RGBW. The luminaire should have versatile optics : 120°, Mean rated service life L70(tq 25 °C) = 50,000 h. Luminaire body of aluminium extrusion with aluminium components. With flush-fitting cover and integral LED unit. Colour of luminaire body Grey/Silver, highly weather resistant/ powder-coated. Ingress protection rating : IP68, Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. LM79, Type Test Certificates from NABL Acrediated laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalent with the engineer or 3rd party testing laboratory approval. Power & DMX Loop In/Out along with moulded connector.impact resistance level should be suitable to site condition. SITC work including all theconnectors, jumper cables, accessories, complete anti-theft mounting mechanism, as approved by the department.