Haridwar Roorkee Development Authority Tender

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work

Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. :100 mm dia

Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter

Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 1 O mm gap for thermal expansion. Bend 87.5° 110 mm bend

Art work :- Supply and laying of below mentioned items,Perparation of plaster surface by Emery paper Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm Making the art work as giver drawings and specification with required finishing as per entire satisfication of Engineer-incharge including labour,sacfolding, paint and all other materials and machinary required for complete the jobs upto 10 Metre height

Providing and laying of Terrace WaterProofing for .Specification Details Providing and applying roller applied, solvent free, Unicrete Membryl flex PU – 100 one component (ASTM C 836), Polyurethane highly permanent elastic ,solvent free, cold applied and cold cured system which includes non-tar extended, standard 100% solids highly elastic, for high crack spanning capability with Root Resistant properties. The total system must be a tough durable film, highly resistant to mechanical damage and totally impervious to water immersion with an average dry film thickness DFT of 1.0 mm after application of a PU Based primer on the prepared surface The waterproofing membrane or system must be applied in minimum 2 coats after application of PU based primer. Application Procedure Strictly follow manufacturer's application instructions and provide a copy in advance to Engineer In-charge to ensure compliance. Application will involve cleaning surface thoroughly with appropriate means. The surface needs to be clean, dry and sound, free of any contamination, which may harmfully affect the adhesion of the membrane. Use pre-measured packaging as far as possible. (Detailed Steps as below mentioned).Surface Cleaning Cleaning the RCC surface and parapet walls thoroughly to make surface free from contaminants like dirt, old loose coatings and laitance & to remove the loose materials by various mechanical means like cleaning with wire brush followed by air blowing the surface with Air Pressure Jet Machine. Substrate compressive strength should be at least 25 Mpa and bond strength of at least 1.5 Mpa. New structures need to be dry for at least 28 days. Max moisture content should not exceed 5 %.Surface Preparation Repairing of mother surface including removal of imperfections protrusions, loose concrete & filling of cracks / horizontal and vertical joints / any type of Khurass / core in the surface. using Polymer Modified Mortar prepared as the Cement :Sand ratio of 1:4 and admixed @ 5 % Unicrete Latex 705 polymer by weight of cement. Sealing at Junction of Vertical & Horizontal Surface Providing and making Corner fillets or coving along the Junction of Horizontal and Vertical surface using Polymer Modified Mortar prepared as the Cement :Sand ratio of 1:4 and admixed @ 5 % Unicrete Latex 705 polymer by weight of cement. Sealer Priming Coat Providing, mixing and applying 1 coat of Unicrete PU base Primer to the mother slab and parapet walls up to minimum height 300 mm or above the soil filling height whichever is higher . Waterproof Coating on Vertical & Horizontal Concrete Surface Providing & applying waterproofing treatment to the primed surface for water barrier in 2 coats to achieve a nominal total DFT of 1.0 mm as per below mentioned procedure a) Applying 1st coat of 1 Component Unicrete Membryl Flex PU -100 liquid membrane coating (Solids 100 %) to achieve a nominal DFT 0.5 mm b) Applying 2nd coat of 1 Component Unicrete Membryl Flex PU -100 liquid membrane coating (Solids 100 %) to achieve a nominal DFT 0.5 mm

Protection Layer & PCC 1:2:4 screed for slope of Terrace Waterproofing Providing & Laying of average 100 mm thick PCC 1:2:4 screed for creating slopes towards the drain in the ratio of 1:10 admixed with integral waterproofing compound @ 200 ml per bag of cement and reinforced with Polypropylene (PP) Fiber or welded wire mesh for crack prevention followed by curing of 7 days with water as per drawings provided by architect or Engineer in Charge.

Providing and fixing of Garware make Nylon Green Colour net of 50mm x 50mm x 2.5mm braided mesh on the vertical walls of the cage and a Top Net of Garware make Nylon Black Colour net of 35mm x 35mm x 1.75mm braided mesh. The top net will be fixed with GI Rope wire and turnbuckle.

Supply and fixing of 25mm foam pad upto a height of 10 ft on the vertical poles and the bottom and center horizontal pipes to be also padded with foam pad of 25mm. The foam pad to be covered with rexin cover.

Supply and installation of FIFA/WRF/KNVB certified Artificial Turf for Futsal. The turf to be of USA/Europe/Australie make. The minimum height of the pile to be 60mm with tuft gauge of 5/8". The no. of tufts per linear meter should not be less than 140 and the density should be minimum 105000 per square meter. The DTex should be not less than 14000

Fabrication and fixing of Futsal goal post of 50mm x 50mm x 2mm MS pipes along with suitable nets

Provinding and fixing of SS-304 setting Bench three Seater

Wiring for Light/Fan/call bell point with modular type switch/socket and GI box, Modular type face plate etc in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick MS conduit pipe Group B

Wiring for Twin control light point with 2 nos , 2-ways, 5 amp. Modular switch GI box and modular face plate in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick MS conduit pipe

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 2 Nos 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring main ,sub mains and Circuit wiring in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in MS Conduit etc as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Wiring main ,sub mains and Circuit wiring in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in MS Conduit etc as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Supply and erection of MS conduit pipe 1.6mm thick ISI marked (Medium) recessed in wall / ceiling etc. including cost of MS bends, inspection box and all other material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work. MS pipe of 20mm dia.

Supply and erection of MS conduit pipe 1.6mm thick ISI marked (Medium) recessed in wall / ceiling etc. including cost of MS bends, inspection box and all other material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work. MS pipe of 25mm dia

Supply and erection of PVC conduit pipe ISI marked (Medium) recessed in wall / ceiling etc. including cost of PVC bends, inspection box and all other material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work. (LAN+DATA+WIFI+TELEPHONE+CCTV) PVC pipe of 20mm dia.

Supply and erection of PVC conduit pipe ISI marked (Medium) recessed in wall / ceiling etc. including cost of PVC bends, inspection box and all other material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work. PVC pipe of 25mm dia

Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. 15/16 amp switch

Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. 6 pin 15/16 amp socket outlet

Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. Bell Push

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

S/E of fittings and accessories Call bell buzzer 220/230 volts A.C. bakelite with double coil

Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 1 & 2 Modules

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole and neutral

Supplying and fixing Cable End Box (Loose Wire Box) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc.as required For 4 way, Double door TPN MCBDB

Supply and erection of hexagonal M.S. box 1.60mm thick having each side 8cms, 7.5cms deep, top covered with M.S. lid by means of screws including 10mm dia 30cm long mild steel rod made into suitable suspension hook and erected in R.C.C. slab for erection of fan, the bottom covered with 3mm thick bakelite sheet with suitable holes, painting etc. compelte with all labour and material required to complete the job

E A R T H I N G Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc.with charcoal/ coke and salt as required.

Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipeof 2.7 metre long etc etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

Pdg. and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required with all labour and material.

Pdg. and fixing 4.00 mm dia copper .wire on surface or in recess for loop earthing as required .

Supply erection testing and commissioning of Recess / Surface mounted 2' x 2' panel 36 WATT ( +_ 2 watt ) LED Efficacy 120 Lm/w. Luminaire including petty materials required to complete the job in all respect. WIPRO Make , Model :- CRCO10R038HP57GL1 or Equivalent in ilips / Trilux as approved by the Engineer-in-charge. Warranty 2 years from the Date of invoice.

Supply of =20 watt LED Tube Light rod, 4' long suitable for rated voltage 220-240V AC working range:- 140-270 V A'c , 50 Hz +_ 5%, AC supply with aluminium alloy base, frosted polycarbonate diffusers with power factor 0.90, Total Harmonic Distortion (THD) 20%, system current - 0.085A, system efficiency 85% , with operating temp. -20° C to 45° C, Lumen output for LED tube should be 2200 lumen and overall lumen/watt of luminaire should be greater than 80%, C.R.I. of LED 80% with correlated colour temperature (CCT) of 6500 minimum burning hour life 40000 hours,LED viewing angle 120 Degree , Make of LED-OSRAM / Samsung/Cree/Nichia complete in all respect with the entire satisfaction of the Engineer-in-incharge. (Make of tube fitting: Philips/Osram/Havells/GE/Wipro/Crompton Greaves). Supply of Industrial General Purpose 4' long tube fitting suitable to house 1x18w LED tube rod 4' long, CRCA steel sheet fabricated housing duly epoxy powder coated in finish & having G13 push fit type lamp holder, rated voltage 240 V and Ingress protection IP-20 complete in all respect with the entire satisfaction of the Engineer-in-incharge. (Make: Philips/ Osram/ Havells/ GE/ Wipro/ Crompton Greaves)

Supply and erection of under ground cable loose in existing pipe or trenches complete with necessary connections. 16 sq mm 4 Core cable (Armoured)

Supply,erection,testing of ceiling fans IS marked (as per IS code 374) with suitable GI pipe complete in all respects complete as per directions of Engineer-in-charge. 56" (1400 mm) (Make: Orient/ Hevells/ GEC).

Supply,erection,testing of exhaust fan (as per IS code 374) having a capacity of 45 cubic metre per minute complete with GI sheet ducting in structure confirming to latest IS specification complete in all respect to satisfaction of Engineer-in-charge. (Make: Orient/ Hevells/ GEC).

Supply and erection of =50W LED lamp light having following specification 1504 mm long IP voltage –AC 230V, total power consumption – 50 W (i/c driver), Lamp Luminous efficiency - 207 lm/W, Lumens - 10350 lm, Colour-cool white, CCT - 5000K, CRI-more than 70, operating tempracture = -35°C to + 50°C, IP rating luminiare - IP65, IP rating LED module - IP54, power factor = ≥0.95. Complete in all respect with the entire satisfaction of Engineer-in-Charge. (Make: Axion).

Supply and Fixing of Carbon Standard Fire Man Axe with 3 Year free comprehensive warranty period including cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge.

Supply and fixing of 6kg ABC type fire extinguisher as per IS:15683(6 kg.) with 3 Year free comprehensive warranty period including cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge.

Supply and fixing of 4.5kg C02 gas type fire extinguishe as per IS: 15683(4.5 kg.) with 3 Year free comprehensive warranty period including cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge.

Providing and Fixing of MS angle iron frame duly painted, of standard height suitable to hold 3 buckets at a time and Gl Filled sand Buckets painted RED complete with 3 Year free comprehensive warranty period including cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge.

Providing Elelctric Shock Treatment Chart of standard size duly framed and covered with 5 mm thick glass etc. complete In all respects including the cost of all petty material required to complete the job upto entire specifications of Engineer-in – charge.

Supply and M.S. pipe (B-class) for suspension rod of ceiling fan including threading if required. (a) 15mm dia

Supply and erection of futsal led flood light 300W LED lamp with SMD 3030 chip+UL driver light having following specification IP voltage 100–277 VAC , total power consumption – 300 W (i/c driver), Lamp Luminous efficiency - 135 lm/W, Lumens - 40500 lm, Colour-cool white, CCT - 2700-7000K, CRI-more than 70, operating tempracture = -35°C to + 50°C, IP rating luminiare - IP65, IP rating LED module - IP54, power factor = ≥0.95. Complete in all respect with the entire satisfaction of Engineer-in-Charge. (Make: Axion).

Supply and erection of Galvanised iron pipe (B-Class) pole welded with M.S. base plate of size 20 cm x 20 cm x 3.00 mm thick, erection of the pole in ground surrounded with 30 cm dia of 1:3:6 cement concrete and a platform 10 cm thick to the size of base plate at the bottom. 6 metres long 65 mm dia pole duly embedded 1 m below ground level.

Supply and erection of 32mm dia metre 1.5 m long bracket (B-class) making an angle of 10° to 15° with horizontal plane for mounting street light fitting fixing of GI. bracket on wall with 2 nos. 32 mm x 3 mm thick M.S. clamps including cost of cutting, welding of G.I. pipe complete with cement sand mixture, bolts and nuts etc. including necessary connections.