Haridwar Roorkee Development Authority Tender

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Coupler 110 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Bend 87.5° 110 mm bend

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Gutter (600 mm over all girth)

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture

Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres.

Supplying and stacking at site.53 mm to 22.4 mm size stone aggregate

Supplying and stacking at site. Stone screening 11.2 mm nominal size (Type B)

Supplying and stacking at site. Moorum

Laying water bound macadam sub-base with brick aggregate and binding material, earth etc. including screening, sorting and spreading to template and consolidation with light power road-roller etc. complete.(payment for brick aggregate and moorum etc. to be made separately) Over burnt (Jhama) brick aggregate 90 mm to 45 mm

Providing and laying of 15 mm curled turf cricket mat.

Providing and fixing of cricket net

Supply and fixing of 50/85 mm continuous line puf roof panel having 0.5mm PPGI sheet outer side and 0.4 mm PPGI sheet inner side of 120gsm, 240MPA on both side,puf infill density 40+-2 kg/m3.RAL 9002(trapezoidal outer and inner micro ribbed panel) fix with self teaping screws with bitumen warsher and filling silicon complete all respect.

Providing and fixing of 8 mm thick polycarbonate sheet fix with self teapping screws with bitumen warsher and filling silicon complete all respect.

Wiring for Light/Fan/call bell point with modular type switch/socket and GI box, Modular type face plate etc in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick MS conduit pipe Group B

Wiring for Twin control light point with 2 nos , 2-ways, 5 amp. Modular switch GI box and modular face plate in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick MS conduit pipe

Wiring main ,sub mains and Circuit wiring in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in MS Conduit etc as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Wiring main ,sub mains and Circuit wiring in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in MS Conduit etc as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Supply and erection of MS conduit pipe 1.6mm thick ISI marked (Medium) recessed in wall / ceiling etc. including cost of MS bends, inspection box and all other material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work. MS pipe of 20mm dia.

Supply and erection of MS conduit pipe 1.6mm thick ISI marked (Medium) recessed in wall / ceiling etc. including cost of MS bends, inspection box and all other material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work. MS pipe of 25mm dia

Supply and erection of PVC conduit pipe ISI marked (Medium) recessed in wall / ceiling etc. including cost of PVC bends, inspection box and all other material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work. (LAN+DATA+WIFI+TELEPHONE+CCTV) PVC pipe of 20mm dia.

Supply and erection of PVC conduit pipe ISI marked (Medium) recessed in wall / ceiling etc. including cost of PVC bends, inspection box and all other material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work. PVC pipe of 25mm dia

Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. Bell Push

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 1 & 2 Modules

S/E of fittings and accessories Call bell buzzer 220/230 volts A.C. bakelite with double coil

Supplying and fixing Cable End Box (Loose Wire Box) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc.as required For 4 way, Double door TPN MCBDB

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc.with charcoal/ coke and salt as required.

Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipeof 2.7 metre long etc etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

Pdg. and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required with all labour and material.

Pdg. and fixing 4.00 mm dia copper .wire on surface or in recess for loop earthing as required .

Supply and erection of hexagonal M.S. box 1.60mm thick having each side 8cms, 7.5cms deep, top covered with M.S. lid by means of screws including 10mm dia 30cm long mild steel rod made into suitable suspension hook and erected in R.C.C. slab for erection of fan, the bottom covered with 3mm thick bakelite sheet with suitable holes, painting etc. compelte with all labour and material required to complete the job

Supply and erection of =120W LED flood light having following specification IP voltage –AC 100-265V, total power consumption – 50 W (i/c driver), Lamp Luminous efficiency - 110 lm/W, Lumens - 13200 lm, Colour-cool white, CCT - 5000-6000K, CRI-more than 70, operating tempracture = -35°C to + 50°C, IP rating luminiare - IP65, IP rating LED module - IP67, power factor = ≥0.95. Complete in all respect with the entire satisfaction of Engineer-in-Charge. (Make: Havels , Bajaj , Philips).

Supply of =20 watt LED Tube Light rod, 4' long suitable for rated voltage 220-240V AC working range:- 140-270 V A'c , 50 Hz +_ 5%, AC supply with aluminium alloy base, frosted polycarbonate diffusers with power factor 0.90, Total Harmonic Distortion (THD) 20%, system current - 0.085A, system efficiency 85% , with operating temp. -20° C to 45° C, Lumen output for LED tube should be 2200 lumen and overall lumen/watt of luminaire should be greater than 80%, C.R.I. of LED 80% with correlated colour temperature (CCT) of 6500 minimum burning hour life 40000 hours,LED viewing angle 120 Degree , Make of LED-OSRAM / Samsung/Cree/Nichia complete in all respect with the entire satisfaction of the Engineer-in-incharge. (Make of tube fitting: Philips/ Osram/ Havells/ GE/ Wipro/ Crompton Greaves). Supply of Industrial General Purpose 4' long tube fitting suitable to house 1x18w LED tube rod 4' long, CRCA steel sheet fabricated housing duly epoxy powder coated in finish & having G13 push fit type lamp holder, rated voltage 240 V and Ingress protection IP-20 complete in all respect with the entire satisfaction of the Engineer-in-incharge. (Make: Philips/ Osram/ Havells/ GE/ Wipro/ Crompton Greaves)

Supply and erection of under ground cable loose in existing pipe or trenches complete with necessary connections. 10 sq mm 4 Core cable (Armoured)

Supply and erection of 50mm diameter 1.5 Mtr long GI bracket (B-Class) making an angle 10 to 15 degree with horizental plane for mounting street fitting on GI bracket on wall with 2 Nos. 50mmx3mm thick MS flat including cost of cutting welding of GI pipe complete with cement sand mixture bolts and nuts etc. including making necessary connection with all labour and material required to complete the job in all respect up to the entire satisfaction of Engineer-in-charge of the work. (HSR31.53)

Supply,erection,testing of SS wind turbine ventilators Size 530-610 mm , air volume 1390m3/h and blade thickness 0.35mm complete in all respects complete as per directions of Engineer-in-charge. 24" (600 mm) (Make: Orient/ Hevells/ GEC).

Supply,erection,testing of exhaust fan (as per IS code 374) having a capacity of 45 cubic metre per minute complete with GI sheet ducting in structure confirming to latest IS specification complete in all respect to satisfaction of Engineer-in-charge. (Make: Orient/ Hevells/ GEC).

Supply and erection of =50W LED lamp light having following specification 1504 mm long IP voltage –AC 230V, total power consumption – 50 W (i/c driver), Lamp Luminous efficiency - 207 lm/W, Lumens - 10350 lm, Colour-cool white, CCT - 5000K, CRI-more than 70, operating tempracture = -35°C to + 50°C, IP rating luminiare - IP65, IP rating LED module - IP54, power factor = ≥0.95. Complete in all respect with the entire satisfaction of Engineer-in-Charge. (Make: Axion).