Haridwar Roorkee Development Authority Tender

1:3:6 (1 Cement : 3 coarse sand(zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources).

(1 cement : 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) 3X.23X2.1=1.449 CUMX10.7=15.50 CUM.

RUBBING WITH HARD WIRE BRUSH AND sand paper,cleaning with tameric water after that NEAT CEMENT PUNNING is done over walls

12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)

6 mm cement plaster of mix : 1:3 (1 cement: 3 fine sand)

Extra for lining out plaster to imitate stone or concrete blocks walling.

Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers,per bag of 50 kg cement used in concrete mix(200 ML PER 50KG CEMENT BAG )

Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete in which M.S false balcony railing for planters of hollow pipe section of 40x30x4 size , 8 nos. of m.s european brakets for hanging lights and lamps of m.s cicular d 40x4 section size and solid 6x6 m.s bar of designer work of approx weight 45 kgs each and mai entry gate of appox 150 kgs is added

Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels including:

FAÇADE A.C.P WORK In front facia designing ,fabrication,fixing,installation and other related work for a.c.p paneling work including labour , material and G.S.T cost of complete work as per the quotation also is to be done in which A.C.P paneling of required brand (alex 10 year warranty) ,colour and quality (3mm thick sheet) fixed over m.s frame of minimum size 40x30x4 with anti rust paint applied on compelete framimg and joints is to be sealed by silicone and is to tested under the guidlines of related supervisor/J.E.

Supply installaton testing and commissioning Luminaries system : - 35 Nos. COB lights and 4 nos. of 2 way fog light ( Wipro , phillips / equivalent ) 380 RS /COB AND 540 RS / 2 way fog light.FOR SUPPLY 1.5 mm copper sturts wire of required brand(polycab)

POTS/VAS with flowering plants of quantity 32 in which cost of plant is rs = 4.4 Providing and Displaying Antirrhinum Hybrid dwarf variety, specimen (8-10 plants) with fresh & healthy foliage in full bloom well developed in 35 cm Earthen Tray/Challi Pot and as per direction of the officer-in-charge. ICD No Description Unit Qty Rate Amount (Rs.) Detail of cost each plant 10095 Antirrhinum Hybrid dwarf variety, specimen (8-10 s) with fresh & healthy foliage in full bloom well developed in 35 cm Earthen Tray/Challi Pot. Each 1 525.00 525.00 Total 525.00 Handling Charges @ 2.5% 13.13 Cost of each plant 538.13 Say Rs. 538.15

Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure). cum 78.10

Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment). cum 515.60

Fine dressing of the ground. sqm 30.70

Cost of brass plate as an abstract medal of owner inculinding installaton,fixing ,testing labour and material etc

JOB WORK GLOW SIGN TEXTS 1395 SQINCH 1.50M X 0.60 M INCLUDING MATERIAL ,LABOUR,G.S.T AND OTHER RELATED CHARGE AS PER THE QUOTATION.

JOB WORK LOGO (CUT OUT) 25,000 RS

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

JOB SERVICE CHARGE ARCHIECT FEES (DESIGN,WORKING DRAWING AND SUPERVISION)

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm. over and including one coat of Special primer applied @ 0.75 ltr / 10sqm

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with White cement and matching pigments etc., complete.Size of Tile 600x600 mm

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of .approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free,

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin-charge.Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed

Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground, all complete as per direction of Engineer-in-Charge. For door/ window/ clerestory window

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-incharge (Door handle, lock and stopper etc.to be paid separately).

Excavation in Soil by Manual Means.(Excavation for roadway in soil using manual means including loading in truck for carrying of cut earth to embankment site with all lifts and lead upto1000 metres.)

Providing concrete for plain/ reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 Nominal mix 1:3.6 (Hand mixing)

Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand).

12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand)