Government Doon Medical College Tender
View complete overview of Uttarakhand Government Doon Medical College Tender
Government Doon Medical College Tender
Eprocure
Opening Date22 Nov 2018
Closing Date8 Dec 2018
Tender AmountRefer Documents
Costs
EMD
₹ 50,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Purchase Of Pathology Items
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2018_DMC_13984_1Bid Award Id
ViewTender No
GDMC/tender/Chemical-2/018/199Tender Authority
Government Doon Medical College ViewPurchaser Address
-Website
http://https://doonmedical.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
AFB Stain Kit, Carbol Fuchsin Stain , Basic Fuchsin ,Phenol, Liquid ,Ethyl Alcohol , Penetrating Agent (as needed) , Deionized Water , Acid Alcohol Decolorizer , Hydrochloric Acid ,Ethyl Alcohol, Methylene Blue Counterstain , Methylene Blue , Deionized Water , Brilliant Green (optional counterstain) , Brilliant Green , Deionized Water ., Store at 2-30 degrees
-
-
-
Basic Blue (New Methyline Blue), 5gm, Chemical formula, C18H22N3S:SCl ZnCl2, Molar mass, 484.22 g/mol, Melting point, 239 °C (462 °F; 512 K), Boiling point, Decomposes
-
-
-
Benedict Sol , 500ml, 173 grams sodium citrate, 100 grams sodium carbonate, and 17.3 grams cupric sulfate pentahydrate in one liter.Store at room temprature
-
-
-
Barium Chloride, 500ml, Barium Chlroide as (BaCl2 . 2H2O) 99.0% min, Matter insoluble in water 0.025% max, Iron (as Fe) 30 ppm max, pH of aqueous solution 6 – 8, Water soluble sulphides 50 ppm max, Strontium as Sr 0.03% max, Sodium as Na 0.03% max, Calcium as Ca 0.03% max, Magnesium as Mg 0.005% max
-
-
-
Benzidine, 500ml, Chemical formulaC12H12N2, Molar mass 184.24 g/mol, Appearance Grayish-yellow,reddish-gray,or white crystalline powder, Density 1.25 g/cm3, Melting point 122 to 125 °C (252 to 257 °F; 395 to 398 K), Boiling point 400 °C (752 °F; 673 K), Solubility in water 0.94 g/100 mL at 100 °C
-
-
-
Bile Salt, 500gm, Light yellow to yellow coloured (may have slight green tinge), homogeneous, free flowing powder. Solubility Soluble in distilled/purified water.,Reaction of 1% w/v aqueous solution at 25ºC.pH 6.00- 7.00, Cultural response observed after an incubation at 35-37ºC for 18-24 hours by preparing MacConkey Agar (M081), using, Bile Salt Mixture as an ingredient.
-
-
-
Bile pigments 500gm Greenish to yellow colour, free flowing powder soluble in D/W and Alcohol, loss on Drying at 105degree celcius
-
-
-
Bromocresol Green, Related Categories B, Cell Biology, Hematology and Histology, Stains & Dyes, A to Z, Stains and Dyes More...grade ACS reagent, assay ≥95%, composition Dye content, 95% visual transition interval 3.8 - 5.4, yellow to blue (passes test), mp 225 °C (dec.)(lit.),absorption λmax 423 nm
-
-
-
Bromocresol Indicator, Molecular Formula : C21H14Br4O5S,Molecular Weight (Mass) :698.04gm/mole, Dye content ≥95%,Solubility 0.1%( 95%Ethanol) Clear solution, Transition range 3.8 – 5.4 Yellow green – Purple, Absorption maximum (pH 3.8) λ1max 438 – 443 nm, Absorption maximum (pH 5.4) λ2max 615 – 618 nm, Absorptivity (A1%/1cm at pH 3.8 at λ1max) 240-270, Absorptivity (A1%/1cm at pH 5.4 at λ2max) 530-570, Loss on drying (110oC) 3%, CAS Registry Number. 76-60-8, PACK SIZE-1kg
-
-
-
Butanol,Specifications, Property Tested, Value or Range, Total purity ≥ 99.8 % , Isobutanol Not detected, Di-n-butyl ether, Not detected ,Aldehydes Not detected, Water ≤ 0.03 % , Acidity (as Acetic Acid) wt % ≤ 0.003, Color (APHA; Pt/Co) 5 , Appearance Clear; Colorless, Nonvolatile matter wt% 5 mg / 100 mL , Specific gravity @ 20/20C 0.810 - 0.812 , Distillation range 1.5 ̊C ,Renewable Carbon wt % 100 %
-
-
-
Capillary for C.T 100pc, Capillary, 75 mm length 1/100
-
-
-
Counting Chamber Improved neubar chamber
-
-
-
Cover Slip , 22 mm sq,10gm
-
-
-
Cover Slip big, 22*50mm: 22*40mm :22*30mm; 10gm
-
-
-
Cytochrome (Leishman Stain) With Buffer 500 ml/ 1ltr, 1. CYTOCHROME STAIN 500 mL, contains Polychromated methyline blue, eosin stain 0.5%, preservatives and stabilizers.,2. CYTOCHROME BUFFER 500mL, contains phosphate buffer-100mMol, preservatives and stabilizers.,Preparation of Working Reagent, All Reagents are ready to use.,STORAGE & STABILITY ,All reagents are stable between 25 to 35°C at RT for 2 years.
-
-
-
Copper Sulphate, 500gm, 1. Appearance i. Powder or Crystal ii. Deep Blue Colour, iii. No Odour, 2. Solubility i. 266g/L (20°)
-
-
-
Coverslip for Haemoeytometer 26 x 20 x 0.4 mm, Pkt of 10
-
-
-
Cuvette, Transparent glass, Scratch free, suitable for reading in colorimeter.
-
-
-
Congo Red, Congo Red Solution (kit only) 500 mL, Sodium Chloride Solution, Alcoholic (kit only) 500 mL, Sodium Hydroxide Solution (kit only) 2 × 12 mL
-
-
-
Deionised water 5 ltr, Distilled water with no ionized salts and no minerals.
-
-
-
Drabkin Sol 5 liter, 1. Potassium ferricyanide = 200 mg, 2. Potassium cyanide = 50 mg, 3. Potassium dihydrogen phosphate = 140 mg, 4. Non-ionic detergent = 1 ml, 5. Distal water = Make up to 1000 ml (1 L), Store in dark place at room temperature
-
-
-
D.P.X. 500 ml, distyrene (a polystyrene), a plasticiser (tricresyl phosphate), and xylene, c DPX
-
-
-
Dextrose 500 gm, Formula: C6H12O6 • H2O, Formula Weight: 198.17 g/mol, Loss on Drying 7.5 - 9.5 %, Residue on ignition (Ash) 0.1 %, Chloride Content 0.018 %, Sulfate 0.025 %, Arsenic (As) 1 ppm, Dextrin Pass, Soluble Starch, Sulfites Pass, Heavy Metals 5 ppm, Residual Solvents USP 467 Meets Requirements, Specific Rotation (dry basis) 52.6 - 53.2 °,Recommended Retest Period 2 years, Specification: PRD.0.ZQ5.10000012896
-
-
-
Diacetyl Monoxide, 500 ml, Identification Pass Test, Packaging Glass Bottle, Quantity 100g, Color White, Melting Point 75°C / °F,CAS 57-71-6, Physical Form Powder; Solid, Molecular Formula C4H7NO2, Linear Formula CH3C:NOHCOCH3, Formula Weight 101.11g/mol, MDL Number MFCD00002116, Synonym 2, 3-Butanedione Monoxime, ChemAlert Storage Symbol Gray, Chemical Name or Material Diacetyl Monoxime, Grade Reagent
-
-
-
Diethanol Amine, Parameter Value, Molecular Formula C4H11NO2, Mol Wt 105.13, CAS # [111-42-2], Description Clear colourless liquid, Assay 99% min, Distillation range in deg cel 265- 270, Acidity as acetic acid (%) 0.01 max, KF Water (%) 0.01 max, Density at 27/27 deg cel 0.872 - 0.875, ROE (%) 0.01 max
-
-
-
Disposable Droper, 50 pc, plastic droper
-
-
-
EDTA Disposable Vail/ Tubes 100 , 1 Plastic Whole Blood tube with spray-coated K2EDTA; 13*75mm; 3ml draw volume ;lavender colour. 2 Plastic Plasma Tube with Glycolytic Inhibitor, 5.0mg SodiumFluoride, 4.0 mg Pot. Ox. 13*75mm 2ml Gray colour, 3 Serum Tube, Increased Silica Act Clot Activator, Silicone-Coated Interior 13x 75mm 0 Red/
-
-
-
EDTA Solution 500 ml Alternate Name/Synonyms: Ethylenediaminetetraacetic acid disodium, Appearance: Liquid, Formulation: 0.5 M (H₂O), CAS Number: 6381-92-6, Molecular Formula: C₁₀H₁₄N₂Na₂O₈ • 2H₂O, Molecular Weight: 372.24, Purity: N/A, Solubility: N/A, Storage Temp.: +4°C, Shipping Conditions: gel pack Description: A 0.5 M solution of ethylenediaminetetraacetic acid disodium (EDTA) in water (pH 8.0).
-
-
-
Eherlich Reagent sol 500 ml Related Categories Aldehydes, Biochemical Reagents for Identification, Building Blocks, C9, Carbonyl Compounds,density 1.10 g/mL at 20 °C
-
-
-
ESR Analyzer Tube 100 piece
-
-
-
ESR Tube-Vintrob Each Type: Vacuum Blood Tube & Blood Bag, Material: Plastic, Certification: CE, SGS, ISO13485, ISO9001, Ethylene Oxide Sterilization: Ethylene Oxide Sterilization, Quality Guarantee Period: Two Years, Group: All
-
-
-
Egg Albumin Powder 200 gm Specification:Protein min 80 %, Fat max 0.2 %, pH 6.0 - 7.0S, Solubility min 92 %, Water content max 8%, Energy 388 kcal / 100 g
-
-
-
Eosin 500 ml CAS 17372-87-1, Molecular Formula C20H8Br4O5 • 2 Na, Formula Weight 691.85g/mol, MDL Number MFCD00005040, Synonym Acid Red 87, Chemical Name or Material Eosin Y, Grade Certified Biological Stain
-
-
-
Eosinophil Diluting Fluid 500 ml Dunger’s original solution contained :-Aqueous Eosin 0.1 gm,Acetone 10 cc,Distilled Water 100 cc.
-
-
-
Filter Paper Each Grade Weight Thickness Absorption Wet Strength Ash Whatman (g/m2) (mm) Speed (cm) (%) equivalentNo. 51B 87 0.17 7.0 5 0.06 1 Chr
-
-
-
Filter paper sheet 100 sheet material sheets, packaging pack of 500mfr. no. Whatman Article No., 28413935 (US reference),Whatman, 1001-824 limit 0.25 psi wet burst 150 sec/100 mL speed(Herzberg) W × L 75 mm × 100 mm thickness 180 μm
-
-
-
Fluoride Tube 100 ,Catalog Number Description Tube Size Draw Volume (ml) Color/ Closure† Label‡ Packaging, 367921 Plastic Plasma Tube with Glycolytic Inhibitor, 5.0mg Sodium Fluoride, 4.0 mg Pot. Ox. 13 x 75 2.0 Gray/H P 100/pack, 1000/case
-
-
-
Fouchets Reagent sol 500 ml Trichloroacetic acid 25.00 gm ,Ferric chloride,10% aqueous 10.00 ml,Distilled water 100.00 ml,Store at 10-30°C
-
-
-
Formaldihyde Solution (Formlin) 5 ltr. vapor density 1.03 (vs air),vapor pressure 52 mmHg ( 37 °C) assay ≥34.5 wt. %, autoignition temp. 572 °F, quality meets analytical specification of USP, contains 9.0-15.0% methanol as stabilizer (GC), concentration 25-50%
-
-
-
Fructose Colour in aqueous solution: Max. 20 ICUMSA , pH in aqueous solution (10% w/v sol.): 4.5-7.0 ,Specific rotation (on anhydrous material): -91.0° to -93.5° ,Moisture: Max. 0.1%, Ash: Max. 0.01% Sulphate: Max. 50 mg/kg , Chloride: Max. 40 mg/kg , Calcium: Max. 5 mg/kg , Glucose: Max. 0.1% , 5-hydroxymethylfurfural (and related compounds): Max. 0.32
-
-
-
Gimsa Stain 125 ml/ 500 ml, Appearance (Color) Dark Green to Very Dark Green and Black and Green-Black Appearance (Form) Powder or Crystals Infrared spectrum Conforms to Structure Wavelength 647 - 653 nm , Absorbance 0.6 _ , Wavelength 520 - 526 nm , Absorbance 0.3 , Wavelength 288 - 294 nm , Absorbance 0.3 _ Wavelength 243 - 249 nm ,Absorbance 0.2 C = 0.005g/l in Methanol Biological Stain Commission Pass Solubility (Color) Dark Blue to Very Dark Blue and Dark Purple to Very Dark Purple and Blue-Purple 1mg/ml Ethanol ,Specification: PRD.0.ZQ5.10000018500
-
-
-
Washing Sol. For Glassware 500 ml Liquid soap, Able to clean, All the grease, Stains etc.
-
-
-
Glass Slide 50 pieces Ref.no: GMD-01,Thickness : 1.3mm./1.2 mm. QTY : 50 Nos.
-
-
-
Glacial Acetic Acid 500 ml Specifications Limits, Acetic Acid, Glacial, % w/w min. 99.50, Heavy metals (Pb) including iron, ppm 5.00, Boiling point, oC 117 - 119, Chloride (as Cl), ppm max. 15.00, Sulphates (as SO4"), ppm max 15.00, Residue on evaporation, % w/w max 00.02, Formic Acid, % w/w max. 00.25
-
-
-
HB Tube/pipette Each Product Code : Model : SSI/12, Brand Name : Haemoglobinometer (Sahli’s)
-
-
-
HCL N/10 500 ml CAS 7647-01-0,7732-18-5, Molecular Formula HCl, MDL Number MFCD00011324, Chemical Name or Material Hydrochloric Acid Solution, 0.1N (N/10), Grade Certified
-
-
-
Hepirin Vecutainer 100 Pkt Additive Sodium Heparin (95 USP) Color Green,Closure Type Hemogard Material Plastic
-
-
-
H2O2 500 ml Formula H2O2,Specification Chemical family: PEROXYGEN ,CAS No.: 7722-84-1 , Hazard class: NFPA hazard class II oxidiser , UN Number: 2014, Grade Hydrogen peroxide is produced in two concentrations: 35 per cent and 50 per cent, Properties H2O2 - 35% H2O2 - 50%, H2O2 35% 50%, Water 65% 50%, Specific gravity @ 20oC 1.13 1.19, pH 2.0-3.0 1.0-3.0, % stability, 3 hours 99.6 99.6, H2O2, gms/l 369 600
-
-
-
Haematoxylin Appearance (Color) Purple to Dark Purple ,Appearance (Form) Solution ,Appearance (Turbidity) Clear ,Performance Conforms Nuclear chromatin purplish to blue and well defined Expiration Date Period 18 months ,Specification: PRD.1.ZQ5.10000031061
-
-
-
HCG Strips (Pregnancy) Pregnancy Test Specifications , Sensitivity: 20mIU/mL hCG Storage: 2-30 degrees Celsius, Specificity: 99.9% Testing time: Any Time of Day, Reaction time: 5 minutes 2 Line Test: Control & Test Line
-
-
-
Immersion Oil 100 ml grade for microscopy, refractive index n20/D 1.516, viscosity 100-120 mPa.s(20 °C), density 1.025 g/mL at 20 °C
-
-
-
Isopropile alchohol 1 ltr. Laboratory grade, Long Stability.
-
-
-
Jenner Stain New Product Code 86543, Product Code 86543, CAS Number 62851-42-7, HS Code 320490.00, Classification TOP ›› Part A & B - Research & Laboratory Chemicals ›› Organic Intermediates ›› Dyes, Stains & Indicators ›› Jenner`s stain
-
-
-
KetoDiastix/Keto Daistrix 50 , Clia Complexity Waived, Detectable Analytes Glucose, Ketone, Disposable Yes For Use With (Application) Urinalysis For Use With (Equipment) Clinitek™ 50, Clinitek™ 100, Clinitek™ 200, Clinitek™ 200+ and Clinitek™ 500 Urine chemistry analyzer Quantity 100 Pack • Ready to use and entirely disposable • Dip and read visually for results • Some strips can be read instrumentally on Clinitek™ 50, Clinitek 100, Clinitek 200, Clinitek 200+ and Clinitek 500 Urine Chemistry analyzers
-
-
-
KOH 500 gm Purity: 90%, MF: KOH, Grade Standard: Agriculture Grade,Food Grade,Industrial Grade, Place of Origin: CN, CAS No.: 1310-58-3
-
-
-
Cytochrome stain 100 gm • Suitable for all cytology smears (FNAC, impression, vaginal smear, bone marrow, body fluid, sputum & soft tissue smears)• Most user friendly self spray fixative with no compressed gas, • Compatible with all cytology staining technique, • Shelflife 3 years, • Available 50 ml
-
-
-
Lieshman’s stain sol (Qualigen) 500 ml, Appearance (Color) Dark Green to Very Dark Green ,Appearance (Form) Powder , Infrared spectrum Conforms to Structure , Solubility (Color) Dark Blue to Very Dark Blue, c = 1mg/ml; Methanol , Recommended Retest Period 4 Years , Specification: PRD.0.ZQ5.10000028405
-
-
-
Lysol 500 ml Model Specifications - Part II SECTION: V Professional Disinfectant Brand
-
-
-
Litmus Paper Product Name: LITMUS RED indicator paper Art No: AL2308 Batch No: AL2308 - LITM Shelf Life : 5 Years
-
-
-
Methyline Blue sol 250 ml Appearance Dark Blue crystalline Powder with a copper- coloured sheen. Solubility soluble in water and alcohol ,Chemical Name 3,7-bis(Dimethylamino)-phenothiazin-5-ium ,chloride C.I. No. 52015 , C.I. Basic Blue 9 CAS No. 61-73-4, Molecular Weight 319.859 ,Chemical Formula C16H18N3SCl, Dye content 82% , Absorbtion Max / λ max. (50% EtOH) 600-664 nm, Einecs No. 200-515-2 , Specification Product Passes BP 80 Specifications, Identification Test Passes Test as per B.P , Solubility Complies as per B.P Test ,Residue On Ignition 0.1% to 2.0% (BP Limit 3.0% Max.) ,Water ( Moisture) 3% to 5% (BP Limit Max.9.0%) Alcohol Insoluble Matter 0.3% to 0.5% (Bp Limit 1.0% Max.) , Chromatographic Purity Passes Test Assay (with ref. to dried subs.) as % of C16H18N3SCl 97% to 98% (Limit Min. 95.0% - 103.0% Max.), Packing & Storage Packed in well closed containers, Melting Point 100°C
-
-
-
Multistrip test kit 100 Minimum 10 parameters of urine, Excellent sensitivity and specificity, Long expiry & Stability.
-
-
-
Methanol 2.5 liter Appearance: Liquid, clear, colourless ,Odour: Mild characteristic alcohol odour ,Odour Threshold: detection: 4.2 - 5960 ppm (geometric mean) 160 ppm recognition: 53 – 8940 ppm, (geometric mean) 690 ppm,pH: Not applicable ,Vapour Pressure: 12.8 kPa @ 20o C , Solubility: Completely soluble , Vapour Density: 1.105 @ 15 oC, Freezing Point: -97.8 o C, Boiling Point: 64.7 o C @ 101.3 kPa, Critical Temperature: 239.4 o C , Relative Density: 0.791, Evaporation Rate: 4.1 (n-butyl acetate =1) Partition Coefficient: Log P (oct) = -0.82 , Solubility in other Liquids: Soluble in all proportions in other alcohols, esters, ketones, ethers and most other organic solvents
-
-
-
Micro Tips (200-1000µl) Inaccuracy (Rel. err.%) Imprecision (CV %) ,Vol. µL Div. µL Min. vol. Mid. vol. Max. vol. Min. vol. Mid. vol. Max. vol. Tip style, 100 - 1000 1 ± 1.5% ± 1.0% ± 0.5% 0.5% 0.4% 0.2% 1000 µL
-
-
-
Micro Tips (20-200µl) Inaccuracy (Rel. err.%) Imprecision (CV %) ,Vol. µL Div. µL Min. vol. Mid. vol. Max. vol. Min. vol. Mid. vol. Max. vol. Tip style, 20 - 200 0.2 ± 1.5% ± 1.1% ± 0.6% 0.6% 0.4% 0.2% 200 µL
-
-
-
Micro Tips (05-20µl) Inaccuracy (Rel. err.%) Imprecision (CV %) ,Vol. µL Div. µL Min. vol. Mid. vol. Max. vol. Min. vol. Mid. vol. Max. vol. Tip style, 5 - 50 0.1 ± 1.5% ± 1.3% ± 1.0% 1.0% 0.7% 0.4% 200 µL
-
-
-
Myelo Peroxidase
-
-
-
NaOH Purity as NaOH, percent by mass, Min 95, Carbonate, percent by mass as Na2 CO3 , Max 3 — A-3 of IS 252 , Lead (as Pb), mg/kg, Max 2 — 15 of IS 1699 ,Mercury (as Hg), mg/kg, Max 1.5 — 15 of IS 1699
-
-
-
N/10 HCL CAS 7647-01-0,7732-18-5, Molecular Formula HCl, MDL Number MFCD00011324, Chemical Name or Material Hydrochloric Acid Solution, 0.1N (N/10), Grade Certified
-
-
-
Nitric Acid Baume 42 Assay (%) W/W 67.2-68.2, Specific Gravity 1.41 Typical , Appearance Clear, colorless to light yellow
-
-
-
O-Toludine-Reagent CAS 7732-18-5,7647-01-0,612-82-8, CAS Min % 83.0,14.72,0.11, CAS Max % 87.0,15.32,0.12, Physical Form Clear, colorless to slight greenish yellow liquid, Chemical Name or Material o-Tolidine Reagent
-
-
-
PAP Smear Stain Kit complete 125 ml 1. Harris’hematoxylin :Hematoxylin = 5g, Ethanol = 50ml, Potassium alum = 100g, Distilled water (50°C) = 1000ml, Mercuric oxide = 2-5g, Glacial acetic acid = 40ml, 2. OrangeG6 :, Orange G (10% aqueous) = 50ml, Alcohol = 950ml, Phosphotungstic acid = 0-15g, 3. EA50 :, 0.04 M light green SF = 10ml, 0.3M eosin Y = 20ml, Phosphotungstic acid = 2g, Alcohol = 750ml, Methanol = 250ml, Glacial acetic acid = 20ml
-
-
-
Pregnancy test strip 100 test , Pregnancy Test Specifications , Sensitivity: 20mIU/mL hCG Storage: 2-30 degrees Celsius, Specificity: 99.9% Testing time: Any Time of Day, Reaction time: 5 minutes 2 Line Test: Control & Test Line
-
-
-
Printer Roll Each 25 mm wright
-
-
-
Phenyle-Hydrazine Chemical Names: PHENYLHYDRAZINE; Hydrazinobenzene; 100-63-0; Hydrazine, phenyl-; 1-Phenylhydrazine; Monophenylhydrazine, Molecular Formula: C6H8N2 or C6H5NHNH2, Molecular Weight: 108.14112 g/mol
-
-
-
Phosphomolybate Molecular Formula Molecular Weight Packaging, H12Mo12N3O40P 1876.35 25g/100g/Bulk
-
-
-
Potassium Iodide 1. Appearance White or almost white powder or colorless crystals , 2. Solubility Very solubility in water, freely soluble in glycerol, soluble in ethanol, 3. Identification Sample solution gives the tests for Potassium and Iodide , 4. Appearance of solution Clear and colourless , 5. Alkalinity NMT 0.5 ml of 0.01M HCl required , 6. Iodates To Comply , 7. Sulphates NMT 150 ppm ,8. Thiosulphates To Comply, 9. Heavy Metals NMT 10 ppm ,10. Iron NMT 20 ppm, 11. Loss on Drying NMT 1.0% ,12. Assay (on dried basis) 99.0% - 100.5% ,13. Organic Volatile Impurities Passes test
-
-
-
PAS Stain Lillie's Cold Schiff's Reagent: Basic fuchsin 10.0 gm ,Sodium metabisulfite 18.0 gm ,Distilled water 1000 0 ml ,Hydrochloric acid 10.0 ml
-
-
-
Purssian Blue StainLaboratory grade, Long shelf life, Quality approved.
-
-
-
Reocinol Reagent for Semen Frutose testLaboratory grade, Long shelf life, Quality approved.
-
-
-
Rticulocyte Stain (Ready to use)Laboratory grade, Long shelf life, Quality approved.
-
-
-
Semen Diluting Fluid 125 mlLaboratory grade, Long shelf life, Quality approved.
-
-
-
Serum Iron / TIBCEach kitExcellent sensitivity and specificity, Long expiry, Quality approved.
-
-
-
Sodium Citrate Vacutainer100Glass vacume tube with good quality, Rubber stopper and lid.
-
-
-
Sodium Hypochlorite sol 10% 5 ltr Suitable for clinical laboratory, Long Stability.
-
-
-
Sodium Nitroproside 500 gm, Laboratory grade, Long shelf life and Stability.
-
-
-
Sample Cups urine 100 Container should have label, Minimum 30 ml capacity.
-
-
-
Sodium Acetate Laboratory grade, Long shelf life and Stability.
-
-
-
Sodium Carbonate Laboratory grade, Long shelf life and Stability.
-
-
-
Sodium Potassium Tartetrate Laboratory grade, Long shelf life and Stability.
-
-
-
Sodium Tungustic Acid Laboratory grade, Long shelf life and Stability.
-
-
-
Sulphuric Acid Laboratory grade, Long shelf life and Stability.
-
-
-
Sudan Black Laboratory grade, Long shelf life and Stability, Suitable for histopathological use.
-
-
-
Test tube 12x100 mm 100 Borosil Glass
-
-
-
Test tube 12x75 mm 100 Borosil Glass
-
-
-
Tissue Paper Each Roll Soft and good absorbing capacity.
-
-
-
Thymole Tablets Laboratory grade, Long shelf life and Stability
-
-
-
Uristrix test kit four parameter 100 Able to detect four parameters in urine, Excellent sensitivity and specificity, Long expiry & Stability
-
-
-
Vacutainer Needle 100 PC Ultra thin walled and straight 2. Sharp regular margins and beveled tip 3. Rust proof 4. Tightly fixed with hub covered with sterile guard. 5. Suitable for sampling of clinical laboratory.
-
-
-
Vacume Tube EDTA 100 Non polluted Should Contain K3 /K2 EDTA, Good Quality Rubber Stopper with lid.
-
-
-
Vacume Tube Gel 100 Non polluted,Plain tube obtains serum specimen, Main merit is serum separated out of blood cells and fibrin naturally, Suitable for wide range of laboratory operations, routine clinical, chemistry, immunology and serology
-
-
-
Vacume Tube Sodium Citrate 100 Non polluted, Should Contain 3.2% Sodium Citrate. Good Quality Rubber Stopper with lid.
-
-
-
Vacume Tube Trisodium Citrate (ESR) Non polluted, Should Contain 3.8% Tri sodium Citrate. Good Quality Rubber Stopper with lid.
-
-
-
Von Willebrand Factor Test Kit Excellent sensitivity and specificity, Long expiry, Quality approved.
-
-
-
Westerngren ESR Disposable Tube As per requirement of ESR test by westerngren method, Graduate, Non poulted.
-
-
-
Wax Medium Composition: Purified paraffin and synthetic resin blend, Applications: Processing/Embedding, Additives: None, Melting Point: 56°C, High Temperature Stability: 65°C, Solid Product Range: Pellets, Sectioning Range: Down to 2µ
-
-
-
WBC Diluting Fluid 500 ml Glacial acetic acid 2.00 ml , Gentian Violet (1% w/v) , Distilled water 97.00 ml, Final pH ( at 25°C) 2.2±0.2
-
-
-
Wintrobe Tube As per requirement of ESR test by wintrobe method, Graduate, Non poulted.
-
-
-
Xylene 500 ml Laboratory grade, Sulphur free, Should be in brown container with good stopper. Long shelf life.
-
-
-
Band-Aid Each Water Proof should contain medicated pad of at least 10 mm area, sterile, strong adhesive.
-
-
-
Blood Bag Double (Capacity - 350 ml) Each Plastic Blood Bags should meet all the standards as laid down in ISO 3826, for the manufacturers have to produce documentary evidence from the laboratories approved by Government of India. The plastic blood bag should have a shelf-life of minimum 2 years. Stability reports from a recognized laboratory must be produced, Slit present at the bottom of the bag should be “adequate to hang the blood bag during transfusion”, Packing size of good : Individual plastic blood bags should be packed in a plastic pack and such 5-10 bags should be packed in aluminum foil pack. 10 such aluminum foiled packs should be packed in the corrugated boxes which should indicate clearly and legibly the name of the manufacturer, name of the product, batch number, quantity, date of manufacturing, date of expiry, gross and net weight and consignee‟s name and address, External sterility of the plastic blood bags should be ensured., Design and shapes: 1. Flexible pre-sterilized 2. Pyrogen free 3. Non-toxic, non-haemolytic, biocompatible material 4. No risk of contamination and air embolism (closed system) with all leak proof seals (Disposable Bags) 5. Slit on the both sides of the bags should be enough to accommodate 5 – 10 ml volume test tubes 6. The capacity of the bag should be enough to prevent any ballooning/rupture of the bag from the seam when it is filled up with the requisite volume of blood , Tubing of bag: 1. Flexible non-kinking 2. Non-sticking 3. Transparent 4. Leak-proof 5. The tubing should have same ID/Segment number as that on the bag 6. The tubes should have multiple printed ID/Segment numbers Needle: 1. 16 gauge ultra thin walled and straight 2. Sharp regular margins and beveled tip 3. Rust proof 4. Tightly fixed with hub covered with sterile guard 5. Hermetically sealedExternal Port: 1. Tamper proof and shouldn't be re-capped 2. Easily accessible Package: 1. Protective dual packaging (Individual & Aluminum) eliminating microbial contamination on surface maintaining the contents of the bag 2. Easy to handle Anticoagulant and preservative solution: 1. CPDA-1 (49 ml i.e. 14 ml/100 ml of blood) 2. Clear & colourless 3. No discolouration on storage at room temperature 4. Manufacturer to supply anticoagulant quality check certificate, Label: 1. Non-peal off 2. Heat sealed labels 3. Remain attached between room temperature to -800C with a transparent adhesive 4. Date of manufacturing, date of expiry and lot number must be mentioned on each bag 5. The expiry date should be at least 2 years from the date of supply of blood bags to the institute Resistance to distortion: Filled to normal capacity shall withstand an acceleration of 5000g for 30 min at temperature 40C to 240C without becoming permanently distorted and should withstand temperature up to -800C without breakage.
-
-
-
Blood Bag Quadruple (350 ml) Each Plastic Blood Bags should meet all the standards as laid down in ISO 3826, for the manufacturers have to produce documentary evidence from the laboratories approved by Government of India. The plastic blood bag should have a shelf-life of minimum 2 years. Stability reports from a recognized laboratory must be produced, Slit present at the bottom of the bag should be “adequate to hang the blood bag during transfusion”, Packing size of good : Individual plastic blood bags should be packed in a plastic pack and such 5-10 bags should be packed in aluminum foil pack. 10 such aluminum foiled packs should be packed in the corrugated boxes which should indicate clearly and legibly the name of the manufacturer, name of the product, batch number, quantity, date of manufacturing, date of expiry, gross and net weight and consignee‟s name and address, External sterility of the plastic blood bags should be ensured., Design and shapes: 1. Flexible pre-sterilized 2. Pyrogen free 3. Non-toxic, non-haemolytic, biocompatible material 4. No risk of contamination and air embolism (closed system) with all leak proof seals (Disposable Bags) 5. Slit on the both sides of the bags should be enough to accommodate 5 – 10 ml volume test tubes 6. The capacity of the bag should be enough to prevent any ballooning/rupture of the bag from the seam when it is filled up with the requisite volume of blood , Tubing of bag: 1. Flexible non-kinking 2. Non-sticking 3. Transparent 4. Leak-proof 5. The tubing should have same ID/Segment number as that on the bag 6. The tubes should have multiple printed ID/Segment numbers Needle: 1. 16 gauge ultra thin walled and straight 2. Sharp regular margins and beveled tip 3. Rust proof 4. Tightly fixed with hub covered with sterile guard 5. Hermetically sealedExternal Port: 1. Tamper proof and shouldn't be re-capped 2. Easily accessible Package: 1. Protective dual packaging (Individual & Aluminum) eliminating microbial contamination on surface maintaining the contents of the bag 2. Easy to handle Anticoagulant and preservative solution: 1. CPDA-1 (49 ml i.e. 14 ml/100 ml of blood) 2. Clear & colourless 3. No discolouration on storage at room temperature 4. Manufacturer to supply anticoagulant quality check certificate, Label: 1. Non-peal off 2. Heat sealed labels 3. Remain attached between room temperature to -800C with a transparent adhesive 4. Date of manufacturing, date of expiry and lot number must be mentioned on each bag 5. The expiry date should be at least 2 years from the date of supply of blood bags to the institute Resistance to distortion: Filled to normal capacity shall withstand an acceleration of 5000g for 30 min at temperature 40C to 240C without becoming permanently distorted and should withstand temperature up to -800C without breakage.
-
-
-
Blood Bag Single (350 ml) Each Plastic Blood Bags should meet all the standards as laid down in ISO 3826, for the manufacturers have to produce documentary evidence from the laboratories approved by Government of India. The plastic blood bag should have a shelf-life of minimum 2 years. Stability reports from a recognized laboratory must be produced, Slit present at the bottom of the bag should be “adequate to hang the blood bag during transfusion”, Packing size of good : Individual plastic blood bags should be packed in a plastic pack and such 5-10 bags should be packed in aluminum foil pack. 10 such aluminum foiled packs should be packed in the corrugated boxes which should indicate clearly and legibly the name of the manufacturer, name of the product, batch number, quantity, date of manufacturing, date of expiry, gross and net weight and consignee‟s name and address, External sterility of the plastic blood bags should be ensured., Design and shapes: 1. Flexible pre-sterilized 2. Pyrogen free 3. Non-toxic, non-haemolytic, biocompatible material 4. No risk of contamination and air embolism (closed system) with all leak proof seals (Disposable Bags) 5. Slit on the both sides of the bags should be enough to accommodate 5 – 10 ml volume test tubes 6. The capacity of the bag should be enough to prevent any ballooning/rupture of the bag from the seam when it is filled up with the requisite volume of blood , Tubing of bag: 1. Flexible non-kinking 2. Non-sticking 3. Transparent 4. Leak-proof 5. The tubing should have same ID/Segment number as that on the bag 6. The tubes should have multiple printed ID/Segment numbers Needle: 1. 16 gauge ultra thin walled and straight 2. Sharp regular margins and beveled tip 3. Rust proof 4. Tightly fixed with hub covered with sterile guard 5. Hermetically sealedExternal Port: 1. Tamper proof and shouldn't be re-capped 2. Easily accessible Package: 1. Protective dual packaging (Individual & Aluminum) eliminating microbial contamination on surface maintaining the contents of the bag 2. Easy to handle Anticoagulant and preservative solution: 1. CPDA-1 (49 ml i.e. 14 ml/100 ml of blood) 2. Clear & colourless 3. No discolouration on storage at room temperature 4. Manufacturer to supply anticoagulant quality check certificate, Label: 1. Non-peal off 2. Heat sealed labels 3. Remain attached between room temperature to -800C with a transparent adhesive 4. Date of manufacturing, date of expiry and lot number must be mentioned on each bag 5. The expiry date should be at least 2 years from the date of supply of blood bags to the institute Resistance to distortion: Filled to normal capacity shall withstand an acceleration of 5000g for 30 min at temperature 40C to 240C without becoming permanently distorted and should withstand temperature up to -800C without breakage.
-
-
-
Blood Bag Single (100 ml) Each Plastic Blood Bags should meet all the standards as laid down in ISO 3826, for the manufacturers have to produce documentary evidence from the laboratories approved by Government of India. The plastic blood bag should have a shelf-life of minimum 2 years. Stability reports from a recognized laboratory must be produced, Slit present at the bottom of the bag should be “adequate to hang the blood bag during transfusion”, Packing size of good : Individual plastic blood bags should be packed in a plastic pack and such 5-10 bags should be packed in aluminum foil pack. 10 such aluminum foiled packs should be packed in the corrugated boxes which should indicate clearly and legibly the name of the manufacturer, name of the product, batch number, quantity, date of manufacturing, date of expiry, gross and net weight and consignee‟s name and address, External sterility of the plastic blood bags should be ensured., Design and shapes: 1. Flexible pre-sterilized 2. Pyrogen free 3. Non-toxic, non-haemolytic, biocompatible material 4. No risk of contamination and air embolism (closed system) with all leak proof seals (Disposable Bags) 5. Slit on the both sides of the bags should be enough to accommodate 5 – 10 ml volume test tubes 6. The capacity of the bag should be enough to prevent any ballooning/rupture of the bag from the seam when it is filled up with the requisite volume of blood , Tubing of bag: 1. Flexible non-kinking 2. Non-sticking 3. Transparent 4. Leak-proof 5. The tubing should have same ID/Segment number as that on the bag 6. The tubes should have multiple printed ID/Segment numbers Needle: 1. 16 gauge ultra thin walled and straight 2. Sharp regular margins and beveled tip 3. Rust proof 4. Tightly fixed with hub covered with sterile guard 5. Hermetically sealedExternal Port: 1. Tamper proof and shouldn't be re-capped 2. Easily accessible Package: 1. Protective dual packaging (Individual & Aluminum) eliminating microbial contamination on surface maintaining the contents of the bag 2. Easy to handle Anticoagulant and preservative solution: 1. CPDA-1 (49 ml i.e. 14 ml/100 ml of blood) 2. Clear & colourless 3. No discolouration on storage at room temperature 4. Manufacturer to supply anticoagulant quality check certificate, Label: 1. Non-peal off 2. Heat sealed labels 3. Remain attached between room temperature to -800C with a transparent adhesive 4. Date of manufacturing, date of expiry and lot number must be mentioned on each bag 5. The expiry date should be at least 2 years from the date of supply of blood bags to the institute Resistance to distortion: Filled to normal capacity shall withstand an acceleration of 5000g for 30 min at temperature 40C to 240C without becoming permanently distorted and should withstand temperature up to -800C without breakage.
-
-
-
Blood Bag Triple (SAGM) (350 ml) Each Plastic Blood Bags should meet all the standards as laid down in ISO 3826, for the manufacturers have to produce documentary evidence from the laboratories approved by Government of India. The plastic blood bag should have a shelf-life of minimum 2 years. Stability reports from a recognized laboratory must be produced, Slit present at the bottom of the bag should be “adequate to hang the blood bag during transfusion”, Packing size of good : Individual plastic blood bags should be packed in a plastic pack and such 5-10 bags should be packed in aluminum foil pack. 10 such aluminum foiled packs should be packed in the corrugated boxes which should indicate clearly and legibly the name of the manufacturer, name of the product, batch number, quantity, date of manufacturing, date of expiry, gross and net weight and consignee‟s name and address, External sterility of the plastic blood bags should be ensured., Design and shapes: 1. Flexible pre-sterilized 2. Pyrogen free 3. Non-toxic, non-haemolytic, biocompatible material 4. No risk of contamination and air embolism (closed system) with all leak proof seals (Disposable Bags) 5. Slit on the both sides of the bags should be enough to accommodate 5 – 10 ml volume test tubes 6. The capacity of the bag should be enough to prevent any ballooning/rupture of the bag from the seam when it is filled up with the requisite volume of blood , Tubing of bag: 1. Flexible non-kinking 2. Non-sticking 3. Transparent 4. Leak-proof 5. The tubing should have same ID/Segment number as that on the bag 6. The tubes should have multiple printed ID/Segment numbers Needle: 1. 16 gauge ultra thin walled and straight 2. Sharp regular margins and beveled tip 3. Rust proof 4. Tightly fixed with hub covered with sterile guard 5. Hermetically sealedExternal Port: 1. Tamper proof and shouldn't be re-capped 2. Easily accessible Package: 1. Protective dual packaging (Individual & Aluminum) eliminating microbial contamination on surface maintaining the contents of the bag 2. Easy to handle Anticoagulant and preservative solution: 1. CPDA-1 (49 ml i.e. 14 ml/100 ml of blood) 2. Clear & colourless 3. No discolouration on storage at room temperature 4. Manufacturer to supply anticoagulant quality check certificate, Label: 1. Non-peal off 2. Heat sealed labels 3. Remain attached between room temperature to -800C with a transparent adhesive 4. Date of manufacturing, date of expiry and lot number must be mentioned on each bag 5. The expiry date should be at least 2 years from the date of supply of blood bags to the institute, Resistance to distortion: Filled to normal capacity shall withstand an acceleration of 5000g for 30 min at temperature 40C to 240C without becoming permanently distorted and should withstand temperature up to -800C without breakage. System must contain a preservative solution – SAGM, Quality should be approved.
-
-
-
Bovin Albumin 5 ml Protein Conc. Must be 22% should be free from viruses.
-
-
-
Cuvette for Heamacue 200 As per specification of Heamocue machine Model-301, 201 and Diaspect model.
-
-
-
Disposable gloves Rubber 100 Should be non tonic non elergic, good quality latex powdered.
-
-
-
EDTA Disposable Vail/ Tube 100 Should Contain K3 /K2 EDTA, Rubber Stoper with lid.
-
-
-
Eppendorfs (1.5 ml) 100 Spill proof must have a rough surface for labeling, perfect for storage of serum/ plasma.
-
-
-
Blotting Paper 100 sheet Should have good absorbing capacity, smooth surface.
-
-
-
HIV Rapid Test Kit , Rapid visual test., Differential detection of HIV-1 & HIV-2 and P24 antigen., Detection of group ‘O’ & subtype ‘C’., Use of envelop antigens gp41& C terminus of gp120 for HIV-1 & gp36 for HIV-2., 100% sensitivity & 100% specificity, In built quality control., Should be 4th Generation Rapid Kit., Short Result Time., Lone Expiry, Must contain accessories for the tests.
-
-
-
HbsAg Rapid Test Kit Should detect all the 11 subtype of HBsAg., Antigen Sensitivity- 0.5 ng/ml., 100% Sensitivity & 99.4% Specificity., Short Result Time, Long Expiry, Must contain accessories for the tests.
-
-
-
HCV Rapid Test Kit Short Result Time., Long Expiry., Must contain accessories for the tests.
-
-
-
HIV Elisa Test Kit 96 test, kit must be able to detect HIV1 and HIV2 antibodies along with P24 antigen., Should be 4th Generation Elisa Kit, Sensitivity 100%, Specificity 98%, , Testing time should be less than 3.30 hours., Long Expiry, The reagents that kit contains must be more than sufficient.
-
-
-
HbsAg Elisa Test Kit Should be 4th Generation Elisa Kit, Sensitivity 100%, Specificity 98%, Testing time should be less than 3.30 hours., Long Expiry, The reagents that kit contains must be more than sufficient., 96 test
-
-
-
HCV Elisa Test Kit Should be 4th Generation Elisa Kit, Sensitivity 100%, Specificity 98%, Testing time should be less than 3.30 hours., Long Expiry,The reagents that kit contains must be more than sufficient., 96 test
-
-
-
Lactin (Anti A) 5 ml Normally clear coloured., Should detect variants and subgroups as detailed in the manufacturer’s instructions for use.
-
-
-
Lancet 200 Sharp, Sterile, Rust free, Suitable for 3mm deep prick.
-
-
-
Malaria Rapid Kit (PF & PV) Sensitivity and Specificity within acceptable range. Wide range of storage temperature. Long Expiry, Should detect at least 95% of P. falciparum infection/cases in 200 parasites per µl of blood and higher at higher parasite density.Able to detect both species of malaria i.e. pf and pv. Quality assurance should be approved.
-
-
-
Sera Anti A+B+D 10 ml Anit ‘A’ - Normally blue coloured, Should equal or exceed potency of reference preparation(s), Should detect variants and subgroups as detailed in the manufacturer’s instructions for use, Anti ‘B’- Normally yellow coloured, Should equal or exceed potency of reference preparation(s), Should detect variants and subgroups as detailed in the manufacturer’s instructions for use, Anti ‘D’- Normally clear coloured, Should equal or exceed potency of reference preparation(s), Should detect variants and subgroups as detailed in the manufacturer’s instructions for use
-
-
-
Sera Anti AB Should be clear., Should equal or exceed potency of reference preparation(s), Should detect variants and subgroups as detailed in the manufacturer’s instructions for use
-
-
-
Sera Cooomb Should equal or exceed potency of reference preparation(s), Should be free from viruses
-
-
-
Sera Anti D (IgG/IgM) Must Contain IgG & IgM antibodies against D antigen, Should equal or exceed potency of reference preparation(s), Should be free from viruses
-
-
-
Syphilis Test Strips Sensitivity and Specificity within acceptable range. Wide range of storage temperature. Long Expiry.
-
-
-
Tourniquet Each Soft, Easy to use, Durable.
-
-
-
Vaccume Tube Plain 100 Non polluted, Plain tube obtains serum specimen, Main merit is serum separated out of blood cells and fibrin naturally, Suitable for wide range of laboratory operations, routine clinical chemistry, immunology and serology
-
-
-
VDRL (RPR) 50 test Kit should contain positive and negative control along with test accessories.Long Expiry. Quality assurance should be approved.
-
-
-
ANA PROFILE (Nitrocellulose Membrane Based Test Rapid) Long shelf life. Q.C. approved.
-
-
-
TORCH PROFILE(IgG) (Nitrocellulose Membrane Based Test Rapid) Long shelf life. Q.C. approved.
-
-
-
TORCH PROFILE(IgM) (Nitrocellulose Membrane Based Test Rapid), Long shelf life. Q.C. approved.
-
-
-
ANTI – HBeAg ELISA For all Elisa Tests- Should be 4th Generation Elisa Kit, Sensitivity 100%, Specificity 98%, Testing time should be less than 3.30 hours.,Long Expiry, The reagents that kit contains must be more than sufficient.,96 test
-
-
-
ANTI HAV ELISA For all Elisa Tests- Should be 4th Generation Elisa Kit, Sensitivity 100%, Specificity 98%, Testing time should be less than 3.30 hours.,Long Expiry, The reagents that kit contains must be more than sufficient.,96 test
-
-
-
ANTI HCV ELISA For all Elisa Tests- Should be 4th Generation Elisa Kit, Sensitivity 100%, Specificity 98%, Testing time should be less than 3.30 hours.,Long Expiry, The reagents that kit contains must be more than sufficient.,96 test
-
-
-
ANTI HDAg ELISA For all Elisa Tests- Should be 4th Generation Elisa Kit, Sensitivity 100%, Specificity 98%, Testing time should be less than 3.30 hours.,Long Expiry, The reagents that kit contains must be more than sufficient.,96 test
-
-
-
ANTI HEV ELISA For all Elisa Tests- Should be 4th Generation Elisa Kit, Sensitivity 100%, Specificity 98%, Testing time should be less than 3.30 hours.,Long Expiry, The reagents that kit contains must be more than sufficient.,96 test
-
-
-
ANTI HSV-1 & HSV -2 ELISA For all Elisa Tests- Should be 4th Generation Elisa Kit, Sensitivity 100%, Specificity 98%, Testing time should be less than 3.30 hours.,Long Expiry, The reagents that kit contains must be more than sufficient.,96 test
-
-
-
ANTI-HBcAg ELISA For all Elisa Tests- Should be 4th Generation Elisa Kit, Sensitivity 100%, Specificity 98%, Testing time should be less than 3.30 hours.,Long Expiry, The reagents that kit contains must be more than sufficient.,96 test
-
-
-
ANTI-HBsAg ELISA For all Elisa Tests- Should be 4th Generation Elisa Kit, Sensitivity 100%, Specificity 98%, Testing time should be less than 3.30 hours.,Long Expiry, The reagents that kit contains must be more than sufficient.,96 test
-
-
-
DENGUE IgM ELISA For all Elisa Tests- Should be 4th Generation Elisa Kit, Sensitivity 100%, Specificity 98%, Testing time should be less than 3.30 hours.,Long Expiry, The reagents that kit contains must be more than sufficient.,96 test
-
-
-
HBcAg ELISA KIT For all Elisa Tests- Should be 4th Generation Elisa Kit, Sensitivity 100%, Specificity 98%, Testing time should be less than 3.30 hours.,Long Expiry, The reagents that kit contains must be more than sufficient.,96 test
-
-
-
HBeAg ELISA For all Elisa Tests- Should be 4th Generation Elisa Kit, Sensitivity 100%, Specificity 98%, Testing time should be less than 3.30 hours.,Long Expiry, The reagents that kit contains must be more than sufficient.,96 test
-
-
-
CRYPTOSPORIDIUM ELISA TEST For all Elisa Tests- Should be 4th Generation Elisa Kit, Sensitivity 100%, Specificity 98%, Testing time should be less than 3.30 hours.,Long Expiry, The reagents that kit contains must be more than sufficient.,96 test
-
-
-
SCRUB TYPHUS ELISA KIT (IN BIOS) IgM ELISA For all Elisa Tests- Should be 4th Generation Elisa Kit, Sensitivity 100%, Specificity 98%, Testing time should be less than 3.30 hours.,Long Expiry, The reagents that kit contains must be more than sufficient.,96 test
-
-
-
ASO (TULIP) Results visible by naked eyes. Long Expiry
-
-
-
ASPERGILLIN AG DETECTION KIT Results visible by naked eyes. Long Expiry
-
-
-
ATCC STRAIN OF Cryptococcus neoformans Q.C. Should be approved.
-
-
-
ATCC STRAIN OF Escherichia coli Q.C. Should be approved.
-
-
-
ATCC STRAIN OF Klesiella, Q.C. Should be approved.
-
-
-
ATCC STRAIN OF STAPHYLOCOCCUS, Q.C. Should be approved.
-
-
-
ATCC STRAIN OF Streptococcus pyogenes, Q.C. Should be approved.
-
-
-
BLOOD CULTURE BOTTLES (FOR ADULTS)BHI,Brain heart infusion broth standard size sterile long shelf life
-
-
-
BLOOD CULTURE BOTTLES (FOR PAEDIATRICS)BHI,Brain heart infusion broth standard size sterile long shelf life
-
-
-
CRP LATEX AGGLUTINATION KIT (TULIP) Kit should contain positive and negative control along with test accessories. Long Expiry. Quality assurance should be approved.
-
-
-
CRYPTOSPORIDIUM LATEX AGGLUTINATION TEST Kit should contain positive and negative control along with test accessories. Long Expiry. Quality assurance should be approved.
-
-
-
RA LATEX AGGLUTINATION KIT Kit should contain positive and negative control along with test accessories. Long Expiry. Quality assurance should be approved.
-
-
-
ROTAVIRUS LATEX AGGLUTINATION Kit should contain positive and negative control along with test accessories. Long Expiry. Quality assurance should be approved.
-
-
-
STREPTEX KIT FOR IDENTIFICATION OF STREPTOCOCCUS Kit should contain positive and negative control along with test accessories. Long Expiry. Quality assurance should be approved.
-
-
-
HIV Rapid Card Test Able to detect both HIV1 and 2.100% Sensitivity 99.4% Sepcificiy.
-
-
-
HbsAg Rapid Card Test Should detect all the 11 subtype of HBsAg. Antizen Sensitivity 0.5 ng/ml. 100% Sensitivity 99.4% Sepcificiy.
-
-
-
HCV Tridot Should have highly purified HCV antigens for Core, NS3, NS4, NS5 immobilized on the device. Detection of all the subtypes of HCV. In built quality control which validates the test. 100% Sensitivity & 98.9% Specificity.
-
-
-
SCRUB TYPHUS(RAPID CARD TEST) KIT-SD BIOLINE Sensitivity and specificity at acceptable range. Result should be clear. Long Expiry
-
-
-
HEMOSPOT- OCCULT BLOOD TEST Stable at room temprature. Short result time. Long Expiry
-
-
-
TUBERCULIN PPD-10 TU Sensitivity and specificity at acceptable range. Result should be clear. Long Expiry
-
-
-
TUBERCULIN PPD-5 TU Sensitivity and specificity at acceptable range. Result should be clear. Long Expiry
-
-
-
TYPHI DOT 100% Sensitivity & 98.9% Specificity. Long Expiry
-
-
-
WIDAL SLIDE AGGLUTINATION,Kit should contain positive and negative control along with test accessories. Reagents should be long Expiry
-
-
-
WIDAL TUBE AGGLUTINATION Kit should contain positive and negative control along with test accessories. Reagents should be long Expiry
-
-
-
NUTRIENT AGAR PEPTONE
-
-
-
MAC CONKEY AGAR
-
-
-
MULLER HILTON AGAR
-
-
-
SIMMON'S CITRATE AGAR
-
-
-
CHRISTENSEN'S UREA AGAR BASE
-
-
-
OXYDASE FERMENTATION BASAL MEDIUM
-
-
-
TRIPLE SUGAR IRON AGAR
-
-
-
STOCK AGAR
-
-
-
BRAIN HEART INFUSION AGAR
-
-
-
BRAIN HEART INFUSION BROTH
-
-
-
PEPTONE WATER
-
-
-
CLED AGAR
-
-
-
BILE ESCULIN GAR
-
-
-
ROBERTSON COOKED MEAT BROTH
-
-
-
BRUCELLA AGAR BASE
-
-
-
XLD AGAR
-
-
-
DEOXYCHOLATE CITRATE AGAR
-
-
-
SALMONELLA SHIGELLA AGAR
-
-
-
LOWENSTEIN JENSEN AGAR MEDIA
-
-
-
AMIE'S TRANSPORT MEDIUM
-
-
-
STUART'S TRANSPORT MEDIUM
-
-
-
SELEMITE-F BROTH
-
-
-
SODIUM CHLORIDE
-
-
-
AGAR POWDER
-
-
-
MANNITOL MOTILITY AGAR
-
-
-
CORN MEAL AGAR
-
-
-
POTATO DEXTROSE AGAR
-
-
-
SABOURAUD DEXTROSE AGAR
-
-
-
SDA MODIFIED
-
-
-
YEAST EXTRACT POWDER
-
-
-
MYCOLOGICAL PEPTONE
-
-
-
DERMATOPHYTE TEST AGAR & SUPPLEMENT
-
-
-
MALT AGAR
-
-
-
OAT MEAL AGAR
-
-
-
SDA AND CHLORAMPHENICOL
-
-
-
CZAPEK DOX AGAR
-
-
-
HI CHROME AGAR FOR CANDIDA
-
-
-
YEAST NITROGEN BASE
-
-
-
TWEEN 40
-
-
-
TWEEN 60
-
-
-
MODIFIED DIXON AGAR
-
-
-
Elisa For Plasmodium Ovali
-
-
-
STAINS AND REAGENTS (NICE) Stain & Reagents should be laboratories grade. Long shelf life and stability.
-
-
-
ACETONE
-
-
-
ALBERT STAIN KIT
-
-
-
ANEROBIC CHARGER(DYANNOC J1&J2 CHARGER)
-
-
-
CALCOFLOUR WHITE STAIN
-
-
-
DIETHYL ETHER
-
-
-
DIFFERENT KITS AND REAGNETS FOR DNA/RNA
-
-
-
DIMETHYL SULPHOXIDE
-
-
-
ETHANOL
-
-
-
ETHER
-
-
-
FLOURESCENT STAIN FOR AFB
-
-
-
FORMALIN 40%
-
-
-
Gentian violet (crystalline)
-
-
-
GLACIAL ACETIC ACID
-
-
-
GLYCEROL
-
-
-
GOMORI'S METHANAMINE SILVER STAIN
-
-
-
GRAM STAIN KIT
-
-
-
HYDROCHLORIC ACID
-
-
-
HYDROGEN PEROXIDE- 30%
-
-
-
INDIA INK
-
-
-
KOVAC'S INDOLE REAGENT
-
-
-
LACTO PHENOL COTTON BLUE
-
-
-
P.V.A. FIXATIVE
-
-
-
PHENOL CRYSTALS
-
-
-
Picric acid
-
-
-
POTTASIUM HYDROXIDE PELLETS
-
-
-
SAFRANIN STAIN
-
-
-
SODIUM BICARBONATE
-
-
-
SPIRIT
-
-
-
SULPHURIC ACID
-
-
-
TRICHROME STAIN
-
-
-
ZN STAIN KIT
-
-
-
ANTIBIOTIC DISCS (1 Pack 5 Vial x 100 Discs Each) For all Antibiotic Discs- Long shelf life more than 1½ Year. Diameter Should be 8 mm. Antibaitic Conc. and specifications should be as per NCCLS guidelines.
-
-
-
AMPICIILIN 2MG
-
-
-
AMIKACIN 20MG
-
-
-
AMOXYCLAV 30MCG
-
-
-
AZITHROMYCIN 15MCG
-
-
-
AZTREONAM 30MCG
-
-
-
CEFAZOLIN 30 MCG
-
-
-
CEFTAZIDIME 30MCG
-
-
-
CEFUROXIME 30MCG
-
-
-
CEFTAZIDIME 30MCG
-
-
-
CEFOTAXIME 30MCG
-
-
-
CEFIPIME 30MCG
-
-
-
CEFTAZIDIME/CLAVULAMIC ACID 30/10MG
-
-
-
CEFOXITIN 30MCG
-
-
-
CHLORAMPHENICOL 30 MCG
-
-
-
COLISTIN 10 MG
-
-
-
CO-TRIMOXAZOLE(23-75/1.25MG)
-
-
-
CLINDAMYCIN
-
-
-
ERYTHROMYCIN
-
-
-
GENATMYCIN 10MCG
-
-
-
GENTAMYCIN 120MCG
-
-
-
IMIPENEM 10MG
-
-
-
LINEZOLID 30MG
-
-
-
METRONIDAZOLE 5MG
-
-
-
MEROPENEM 10MCG
-
-
-
NITROFURANTOIN 300MCG
-
-
-
NALIDIXIC ACID 30MG
-
-
-
PENICILLIN G 10UNITS
-
-
-
PIPERACILLIN 100MG
-
-
-
PIPERA-TAZOBACTUM 100/10MCG
-
-
-
TETRACYCLINE 30MG
-
-
-
TICARCILLIN-CLAVULANIC ACID 75/10MCG
-
-
-
TOBRAMYCIN 10MCG
-
-
-
VANCOMYCIN 30 MCG
-
-
-
CEFOPERAZONE-SULBACTUM 75/30MCG
-
-
-
POLYMYXIN B 300UNITS
-
-
-
POLYMYXIN B 50UNITS
-
-
-
CIPROFLOXACIN 5MG
-
-
-
TEICOPLANIN 30 MCG
-
-
-
BACITRACIN 50 DISCS/VL
-
-
-
OPTOCHIN DISC
-
-
-
NOVOBIOCIN 30MG
-
-
-
OXIDASE DISC
-
-
-
Nomeclature ( Laboratory Grade)
-
-
-
100% Absolute Alcohol
-
-
-
Acetone
-
-
-
Adesive Surgical Tape
-
-
-
Alpha Naphthol
-
-
-
Alum
-
-
-
Ammonia
-
-
-
Ammonium Molybdate
-
-
-
Amonium Sulphate
-
-
-
Antisera for ABO Group
-
-
-
Apron (Cloth)
-
-
-
Bacl2 (Barium Chloride)
-
-
-
Barfoed Reagent
-
-
-
Benedict Reagent
-
-
-
Bentonite
-
-
-
Benzene Hexachloride (Gammexane
-
-
-
Benzoic acid
-
-
-
Bile Salt
-
-
-
Biuret Reagent
-
-
-
Bleaching Powder
-
-
-
Buffer Solution
-
-
-
Calamine
-
-
-
Capillary tube
-
-
-
Cidar Wood Oil
-
-
-
Concentrated HCL
-
-
-
Concentrated Nitric Acid HNO3
-
-
-
Concentrated Sulphuric Acid H2SO4
-
-
-
Container for urine specimen
-
-
-
Copper Acetate
-
-
-
Copper Solphate
-
-
-
Copper Sulphate(CuSO4)
-
-
-
Cotton Bandage Pkts
-
-
-
Cotton Gauze
-
-
-
Cotton Wool Roll
-
-
-
Creatinine
-
-
-
DDT
-
-
-
Dettol/Chloroxylenol 400 ml
-
-
-
Dextrise
-
-
-
Diacetyl Monoxime
-
-
-
Disposable Apron (Plastic)
-
-
-
Dist. Water
-
-
-
DPX
-
-
-
ECG Gell
-
-
-
ECG Roll
-
-
-
EDTA Vial
-
-
-
Egg Albumim
-
-
-
Eosine Powder Red
-
-
-
Ethanol
-
-
-
Face Mask disposable
-
-
-
Feck3 (Ferric Chloride)
-
-
-
Filter Paper (Waterman) Pkts
-
-
-
Formaline
-
-
-
Formaline Solution
-
-
-
Fouchet's Reagent
-
-
-
Fructose
-
-
-
Gentian Crystal Violet
-
-
-
Glacial Acetic Acid
-
-
-
Glacial Acitic Acid
-
-
-
Glass Slide (500 in pkts)
-
-
-
Gloves Surgical Size 6, 6.5, 7, 7.5
-
-
-
Glucose Laboratory grade
-
-
-
Glycerine
-
-
-
H2O2 (Hydrogen Peroxide)
-
-
-
Haematoxyline Stain
-
-
-
Halogen Tablets
-
-
-
HCL N/10
-
-
-
Hyderogen Peroxide 30%
-
-
-
Hypodermic Needle (100 in Pkts)
-
-
-
Iodine
-
-
-
Iodine solution
-
-
-
Kimograph paper (100 piece in pkts)
-
-
-
Lactose
-
-
-
Lancet
-
-
-
Lead Acetate
-
-
-
Leishman Stain
-
-
-
Leucomalachite green
-
-
-
Lime
-
-
-
Lindane
-
-
-
Liquefied phenol
-
-
-
Lugol's Iodine
-
-
-
Magnisium Sulphate(MgSO4)
-
-
-
Malathion
-
-
-
Maltose
-
-
-
Mecuric Sulphate
-
-
-
Medical Examination Gloves (Medium)
-
-
-
Molish Reagent
-
-
-
Needle size 21 , 23
-
-
-
Ninhydrin
-
-
-
Nitric Oxide 400ml
-
-
-
Ortho Toludine
-
-
-
Paraffin wax (60-62C)
-
-
-
Paris Green
-
-
-
Perimeter & Scotometer Chart (100 paper)
-
-
-
PH Paper (100 paper in pkts)
-
-
-
Phenol (Carbolic Acid)
-
-
-
Phenolphthalein
-
-
-
Phenyl Hydrazine Hydrochloride
-
-
-
Phosphoric Acid
-
-
-
Phosphotungstic Acid
-
-
-
Piric Acid
-
-
-
Plain Vial
-
-
-
Plaster of Paris
-
-
-
Platlet count Fluid
-
-
-
Potassium Chloride
-
-
-
Potassium Hydroxide
-
-
-
Potassium Iodide
-
-
-
Potassium Iodide
-
-
-
Potassium Permegnate
-
-
-
Povidone Iodine 400 ml
-
-
-
Povidone Iodine Ointment
-
-
-
Pyridine
-
-
-
RBC Fluid
-
-
-
Resorcinol
-
-
-
Rose water ad.
-
-
-
Salicylic acid
-
-
-
Saturated Picric Acid
-
-
-
Savlon 400 ml
-
-
-
Seliwanoffs Regent
-
-
-
Sodium Acetate
-
-
-
Sodium Carbonate
-
-
-
Sodium Chloride
-
-
-
Sodium Citrate
-
-
-
Sodium Hydroxide
-
-
-
Sodium Hypochlorite
-
-
-
Sodium Nitrite
-
-
-
Sodium Nitroprusside
-
-
-
Sodium Potassium Tartrate
-
-
-
Sodium Sulphate
-
-
-
Sodium Tungstate
-
-
-
Spirit
-
-
-
Square Cover Slip Pkts
-
-
-
Starch
-
-
-
Sucrose
-
-
-
Sulfosalicylic Acid
-
-
-
Sulphanilic Acid
-
-
-
Sulphur Powder
-
-
-
Surgical Cap disposable
-
-
-
Surgical Cotton
-
-
-
Syringes 5ml, 10ml size
-
-
-
Thio Semicarbazide
-
-
-
Thiourea
-
-
-
Tincture Iodine
-
-
-
Tissue Roll Pkts
-
-
-
Trichloro Acetic Acid(TCA)
-
-
-
Triphenyl Tetrazolium Chloride
-
-
-
Trisodium Citrate
-
-
-
Urea
-
-
-
Uric Acid
-
-
-
Uristrip
-
-
-
WBC Fluid
-
-
-
Xylene
-
-
-
Zinc Phosphide
-
-
-
Zink Oxide
-
-
-
potassium Acetate 500gm
-
-
-
potassium Nitrate 500gm
-
-
-
acetone
-
-
-
aluminium hydroxide
-
-
-
anhydrous aluminium chloride
-
-
-
cedar wood oil (immersion oil)
-
-
-
carmine powder
-
-
-
alcian blue
-
-
-
alizarin red-S
-
-
-
acid fuschin
-
-
-
ethanol absolute
-
-
-
eosine yellowish
-
-
-
formaldehyde solution 100%
-
-
-
glycerol
-
-
-
ferric ammonium sulfate
-
-
-
hydroquinon extrapure AR
-
-
-
solochrome cyanin
-
-
-
maygrunwald
-
-
-
normal saline
-
-
-
oxalic acid
-
-
-
sodium thiosulfate
-
-
-
sodium sulfite crystals
-
-
-
potassium dichromate
-
-
-
zinc sulfate
-
-
-
orcin
-
-
-
periodic acid
-
-
-
paraffin liquid light
-
-
-
paraguard
-
-
-
schiff reagent
-
-
-
sprit
-
-
-
silver nitrate
-
-
-
methanamide silver gomori stain kit
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements