Garhwal Mandal Vikas Nigam Limited Tender

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand)

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter

Providing and fixing of 1000 ltr capacity bio digester Tank with Anaculam Complete in all respect.

Installation of Changing Room(Male / Female) - A single structre in which 4 partitions to be provided for gents ladies changing room. Structure and wall made of stainless steel 304 gade 1mm thick (Apporx. 1550 kg) Base structure made of mild steel with non corrosion coating ( For reducing civil work) Front area fixed with non slip sheets. Stainless steel florr (AISI304 grade) of 2 mm thick with SS stiffeners. Single layered wall and door for thermal insulation, Cloth rack , coat hook, SS Mirror including Features detail for male & Female Room occupancy indication system for vacant / busy, exit through manual operation , Automated interior lifhts and exhaust fans also Safety electrical such as MCB, RCCB, ELCB, Earthing, Ups for power, Exhaust fan and status indication display with Units Packing, Transportation, Signage, Site commissioning complete in all respect

Toilet Complex model having the following constructionsal - A single structre in which 2 partitions to be provided for gents, ladies toilet. Structure and walls made of stainless steel 304 gade 1mm thick (Apporx. 900 kg) Base structure made of mild steel with non corrosion coating ( For reducing civil work) Stainless steel floor (AISI304 grade) of 2 mm thick with SS stiffeners. Double layered walls and door for thermal insulation. Toilet indication tower display, if required (Optional) Front covering for ladies toilet. If required (optional) Grab bar , Coat hook, SS Mirror Features details for Male Female toilet 1) Toilet occupancy incdication system for vacant / busy 2) Water Low indication 3) Switch / Coin / RFID card operated entry 4) Exit through manual operation 5) Automated interior lights and exhaust fans 6) Voice Guidance system 7) Automatic self cleaning & washing mechanism a) Automated pre flush before us b) Automated post flush after use c) Automated floor washing after every specified number of users web connectivity Updatation (Including server charges UV Disinfection including plumbing (Nirali Bluma Closet, Washbasin, 300 ltr water tank UPVC Plumbing materials and fittings with Motorized valves for control Pump) & Electronics & Electrical Details: Safety electrical such as MCB, RCCB, ELCB, Earthing, Ups for powe backup, Compounds Normal LED lifht Fixtures, Exhaust fan and status indication display. Industrial PLC for automation, Wiring kit for both cabins sensors including Electronics & Electrical Details: Safety electrical such as MCB, RCCB, ELCB, Earthing, Ups for powe backup, Compounds Normal LED lifht Fixtures, Exhaust fan and status indication display. Industrial PLC for automation, Wiring kit for both cabins sensors with Units Packing, Transportation , signage & /site commissioning complete in alll respect.