Food Corporation Of India Tender

Supply , Installation, Testing & Commissioning of Control panel Housing comprising of suitable MCB, timer- contractor circuit for automatic ON/Off of lights.

Supplying , installation , testing and commissioning of cubical type panel with size (1.3x1.25x.4 Mtr) suitable for operation at 415 (+/-) 6% Volts,50Hz,3 Phase 4 Wire system made out from CRCA sheet steel 2.0 mm and covers shall be cold rolled sheet thickness not less than 1.6mm fabricated factory finished followed-42 by powder coated painting & provided with gaskit to make dust vermin proof degree of IP , hinged type openable door , loaking arrangement , detachable gland plate , connection , interconnections with suitable size (400 Amp capacity) 4 strip high conductivety elctrical aluminium (ALU) busbar codifies in red,yellow,blue and black colour and PVC insulated copper conductor cable 1100Volt grade for internal wiring including providing and fixing digital type Ampere meter, Voltmeter, Indication LED lamp, Selector switch,Labeling comprise white letters on black background including foundation works etc as required conforming to relevant BIS/IS codes with following:- 1)FP MCCB 250Amps 36KA-01No 2) FP MCCB 125 amps 36KA-03 Nos 3) MCB DP 32 Amps -04 Nos 4) MCB TPN 63 Amps -02 Nos 5) 4 strip AL Busbar 400Amp- 01 Set

S/I/T/C of weather proof 3 phase SMC MOULDED SERVICE CONNECTION BOARDS / Busbar box for AB Cables with pole mounting arrangement, with cable entry from bottom or sides and Busbar for high fault currents(Confoming to relevant BIS/IS standard or equivalent)

Supply of PVC sheathed L.T. ABC Cable of 1.1 KV Grade Al Conductor cable as reqd as per IS-14255 3X70 + 1X16 + 1X50 sqmm.

Supply of accessories for erection of AB Cable(Conforming to relevant BIS/IS standard or equivalent)

Supply of ABC clamp

Supply of ABC hook

Supply of Suspension Clamp

Supply of Dead Clamp

Supply of PG connector

Supply of PG Clamp

Erection of AB Cable on existing poles including fixing accessories as reqd.

Supply of steel Tubular pole 8.5 to 9.00 mt with Red oxide painted 410/SP.-29 swaged type steel tubular pole in single part along with 300X300X6 base plate & 100X3 top cap(Confoming to IS 2713 (PART I TO III) : 1980 or equivalent with upto date amendments )

Erection of metallic pole of following length in cement concrete 1:3:6(1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc as required.

Above 8.0 metre and upto 10.0 metre

Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required.

Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts,bolts and washer, painting the flat iron with primer and finish paint etc. as required. (conforming to IS-1239 part 1 (2004) or equivalent)

Supply of PVC insulated PVC sheathed 1.1KV grade 2x10 sq.mm armoured Aluminum conductor cable as required confirming to IS–7098 (Part I) 1988 with up to date amendments.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1KV grade of following size on wall surface as required.

Upto 35 sq.mm(clamped with 1mm thick saddle)

Credit of following items

Aluminium Scrap ( i.e. from damaged cables (L.S.))