Bridge Ropeway Tunnel And Other Infrastructure Development Corporation Of Uttarakhand Limited Tender
View complete overview of Uttarakhand BRIDCUL Tender
Bridge Ropeway Tunnel And Other Infrastructure Development Corporation Of Uttarakhand Limited - BRIDCUL Tender
Civil And Construction
Building Construction
Eprocure
Opening Date20 Dec 2023
Closing Date16 Jan 2024
Tender Amount₹ 2,24,09,000
Costs
EMD
₹ 4,50,000Document Cost
₹ 5,900Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_BRID3_66593_1Bid Award Id
ViewTender No
BRIDCUL/HLD/05/2023-24Tender Authority
Bridge Ropeway Tunnel And Other Infrastructure Development Corporation Of Uttarakhand Limited ViewPurchaser Address
-Website
http://uktenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Supplying and filling in plinth with Jamuna sand under floors including, watering, ramming consolidating and dressing complete.
58.32
-
-
Diluting and injecting chemical emulsion (chlorpyriphos/Lindane E.C 20% with 1% concentration) at the rate of one litre per hole at 300 mm c/c to all the horizontal and vertical surface of the excavation made for the foundation of the building, soil under floor,apron, back fill material and along all the faces of the walls for PRE-CONSTRUCTIONAL anti-termite treatment (including the cost of chemical emulsion) as per IS:6313 Part-II. (Plinth area of building shall be measurd for payment.)
386
-
-
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size).
40
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).
182.84
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).
10.34
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth leve 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)
4
-
-
Centring and shuttering including strutting,propping etc.and removal of form for :Foundations, footings, bases of columns, etc. for mass concrete.
183.61
-
-
Centring and shuttering including strutting,propping etc.and removal of form for : Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
598.4
-
-
Centring and shuttering including strutting,propping etc.and removal of form for : Suspended floors, roofs, landings, balconies and access platform.
578.27
-
-
Centring and shuttering including strutting,propping etc.and removal of form for : Shelves (Cast in situ)
4.78
-
-
Centring and shuttering including strutting,propping etc.and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers.
566
-
-
Centring and shuttering including strutting,propping etc.and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts.
411.12
-
-
Centring and shuttering including strutting,propping etc.and removal of form for : Stair ( Excluding landings ) except spiral-stair case
57.24
-
-
Centring and shuttering including strutting,propping etc.and removal of form for : Small lintels not exceeding 1.5m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like.
7
-
-
Centring and shuttering including strutting,propping etc.and removal of form for : Edges of slabs and breaks in floors and walls. Under 20 cm wide
5
-
-
Centring and shuttering including strutting,propping etc.and removal of form for : Weather shade, Chajjas, corbels etc., including edges.
25
-
-
Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured).Suspended floors, roofs, landing, beams and balconies (Plan area to be measured)
68
-
-
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.upto plinth Level. Thermo-Mechanically Treated bars.
38540.15
-
-
Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete work including pumping of concrete to site of laying but excluding the cost of centring, shuttering, finishing and reinforcement. including Admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. M-25 grade reinforced cement concrete by using 410kg. of cement per cum of concrete. All works upto plinth level
282.09
-
-
Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete work including pumping of concrete to site of laying but excluding the cost of centring, shuttering, finishing and reinforcement. including Admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. M-25 grade reinforced cement concrete by using 410kg. of cement per cum of concrete.
All work upto floor V level.
144.29
-
-
Providing M-30 grade concrete by using 420kg of cement per cum of concrete instead of M-25 grade B.M.C/ R.M.C..
26
-
-
Brick work with F.P.S. bricks of class designation 75 in foundation and Plinth in Cement mortar 1:6 (1 cement : 6 coarse sand)
53.87
-
-
Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)
79.44
-
-
Half brick masonry with F.P.S. brick of class designation 75 in foundations and plinth in : cement mortar 1:4 (1 cement : 4 coarse sand)
357.18
-
-
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level Cement mortar 1:4 (1 cement :4 coarse sand)
12
-
-
Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry (with F.P.S. bricks).
369.18
-
-
Honey-comb brick work 10/11.4 cm thick with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand). Rs. 277.2X2 For 23 cm thick wall
20.32
-
-
Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters,window sills, facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement,mixed with matching pigment,epoxy touch ups, including rubbing, curing mouldingand polishing to edge to give high gloss finish etc. complete at all levels. Area of slab over 0.50 sqm.
3.24
-
-
Extra for providing edge moulding to 18mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work
4.55
-
-
Extra for fixing marble / granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resing based adhesive including cleaning etc. complete.
4.55
-
-
Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete.
6
-
-
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
993.6
-
-
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in- charge Profile C: Fixing with adjustable lugs with split end tail to each jamb
476.91
-
-
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in- charge Profile B: Fixing with adjustable lugs with split end tail to each jamb
12
-
-
Providing and fixing stainless steel ( Grade 304) railing made of Hollowtubes, channels, plates etc., including welding, grinding, buffing, polishingand making curvature (wherever required) and fitting the same withnecessary stainless steel nuts and bolts complete, i/c fixing the railingwith necessary accessories & stainless steel dash fasteners , stainlesssteel bolts etc., of required size, on the top of the floor or the side ofwaist slab with suitable arrangement as per approval of Engineer-in-charge,( for payment purpose only weight of stainless steel members shall beconsidered excluding fixing accessories such as nuts, bolts, fasteners etc.).
436.2
-
-
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick.
175.43
-
-
Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
5
-
-
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.
193.55
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sum including pointing in white cement mixed with pigment of matching shade complete.
156.7
-
-
12 mm thick cement plaster in 1:4 ( 1 cement and 4 fine sand) mortar including supply of all material , labour and T&P etc. required for proper completion of the work.
21
-
-
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
18
-
-
12 mm cement plaster of mix : 1:6 (1 cement : 6 fine sand)
351.54
-
-
15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement : 6 fine sand)
455.47
-
-
20 mm cement plaster of mix 1:6 (1 cement: 6 coarse sand)
477.53
-
-
6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand)
403.38
-
-
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating
coat of neat cement 20 mm cement plaster
32
-
-
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including priming coat with cement primer.
558.38
-
-
Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sum).
125
-
-
Wal painting with plastic emulsion paint of approved brand and manufacture to give an even shade Two or more coats on new work
477
-
-
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
5
-
-
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
2
-
-
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
61.91
-
-
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) Over item no. 9.20 and 9.21.
2
-
-
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S including cost of adhesive of approved quality. 1.0 mm thick.
4
-
-
Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Twin rubber stopper
2
-
-
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm
2
-
-
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than gradeAC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 250x10 mm
2
-
-
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than gradeAC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm
2
-
-
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than gradeAC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm
4
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) : With float glass panes of 4.0 mm thickness
81
-
-
Supplying and stacking at site 53 mm to 22.4 mm size stone aggregate
70.5
-
-
Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate
8
-
-
30 mm thick factory made Polyvinyl Chloride (PVC) door shuttermade of styles and rails of a uPVC hollow section of size60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuiltdecorative moulding edging on one side. The styles and railsmitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0mm and stainless steel screws. The styles of the shutterreinforced by inserting galvanised M.S. tube of size 25x20mm and 1 mm (± 0.1 mm) wall thickness. The lock rail madeup of 'H' section, a uPVC hollow section of size 100x30 mmand 2 mm (± 0.2 mm) wall thickness fixed to the shutter stylesby means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of sizenot less than 620 mm, having over all thickness of 20 mm and1 mm (± 0.1 mm) wall thickness . The panels filled verticallyand tie bar at two places by inserting horizontally 6 mmgalvanised M.S. rod and fastened with nuts and washers,complete as per manufacturer's specification and direction ofEngineer-in-charge.
15.99
-
-
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. 30 mm thick shutters
28.22
-
-
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs grade No.2 and M.S. top cover of required thickness for rolling shutters. 80x1.25mm M.S. laths with 1.25 mm thick top cover.
9
-
-
Providing and fixing ball bearing for rolling shutters.
2
-
-
Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
20
-
-
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sum mixed with water proofing cement compound @ 0.253 kg/sum. This layer will be allowed to air cure for 4 hours.
b) Second layer of slurry of cement @ 0.242 kg/sum mixed with water proofing cement compound @ 0.126 kg/sum. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.
The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
22.9
-
-
Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)
38.52
-
-
Providing and fixing water closet squatting pan (Indian type W.C.pan) with 100mm White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests.
2
-
-
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever),
6
-
-
One urinal basin with 5 litre white P.V.C. automatic flushing cistern.
2
-
-
Range of three urinal basins with 10 litre white P.V.C. automatic flushing cistern.
2
-
-
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good
6
-
-
Providing and fixing soil , waste and vent pipes: S.C.I S&S pipe as per IS:1729 100 mm dia.
47.5
-
-
Providing and fixing soil , waste and vent pipes: S.C.I S&S pipe as per IS:1729 75 mm dia
71
-
-
Providind and fixing M.S.holder bat clamps of approved design to sand cast iron/cast iron (squn) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1cement :2coarse sand :4graded stone aggregate 20mm nominal size ) including cost of cutting holes and making good the walls etc: 100 mm dia.
12
-
-
Providind and fixing M.S.holder bat clamps of approved design to sand cast iron/cast iron (squn) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1cement :2coarse sand :4graded stone aggregate 20mm nominal size ) including cost of cutting holes and making good the walls etc: 75 mm
8
-
-
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100 mm dia.
6
-
-
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 75 mm dia
4
-
-
Providing and fixing 100 mm sand cast iron S&S plain bend of required degree. 100 mm dia.
10
-
-
Providing and fixing 100 mm sand cast iron S&S plain bend of required degree. 75 mm dia
9
-
-
Providing and fixing 100 mm sand cast iron S&S heel rest sanitry bend of required degree. 100 mm SCI S&S heel rest sanitary bend
3
-
-
Providing and fixing 100 mm sand cast iron S&S heel rest sanitry bend of required degree. 75 mm dia
2
-
-
Providing and fixing single equal plain junction of required degree with access door insertion rubber washer 3 mm thick bolts and nuts complete. 100x100x100 mm
6
-
-
Providing and fixing single equal plain junction of required degree with access door insertion rubber washer 3 mm thick bolts and nuts complete. 75x75x75mm
6
-
-
Providing and fixing 100 mm sand cast iron s&s terminal guard 100mm
3
-
-
Providing and fixing 100 mm sand cast iron S&S collar S.C.I S&S pipe as per IS:1729 100mm
6
-
-
Providing and fixing sand cast iron S&S collar S.C.I S&S pipe as per IS:1729 75mm
10
-
-
Providing and fixing 100 mm M.S stays and clamps for sand cast iron /centrifugally cast (squn) iron pipes of diameter: 100 mm dia.
3
-
-
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors: 100 mm inlet and 75 mm outlet SCI tarp
10
-
-
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors: 100 mm inlet and 100 mm outlet SCI tarp
13
-
-
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
19
-
-
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
15
-
-
Providing and fixing in position precast R.C.C. manhole cover and frame of required Square shape 450mm internal dimensions
34
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately) : For fixed portion. Powder coated aluminium (minimum thickness of powder coating 50 micron)
30
-
-
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)
13
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) :With float glass panes of 4.0 mm thickness
2
-
-
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer –in-charge, upto 90 metre depth below ground level. 300 mm dia
160
-
-
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer –in-charge.150 mm nominal size dia
160
-
-
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
5.4
-
-
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
3.6
-
-
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
14.4
-
-
Constructing brick masonry road gully chamber 110x50x77.5 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame and vertical grating complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
15
-
-
Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density .
70.5
-
-
Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineerin- Charge. 80mm thick Cement concrete paver block of M-30 grade with approved colour, design & pattern.
705
-
-
Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture 100 mm diameter
60
-
-
Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture 150 mm diameter
80
-
-
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded)
75
-
-
Providing and fixing square-mouth S.W. gully trap grade ‘A” complete with C.I. With F.P.S Brick class designation 75
6
-
-
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse Inside size 90x80 cm and .45 cm deep including C.I. cover with frame (light duty 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg): With F.P.S. bricks with class designation 75
3
-
-
Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg): With F.P.S. bricks with class designation 75
3
-
-
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Iinternal work - Exposed on wall 15 mm dia nominal bore
35
-
-
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Iinternal work - Exposed on wall 20 mm dia nominal bore
75
-
-
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Iinternal work - Exposed on wall 25 mm dia nominal bore
50
-
-
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Iinternal work - Exposed on wall 32 mm dia nominal bore
10
-
-
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Iinternal work - Exposed on wall 40 mm dia nominal bore
10
-
-
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. (external work) (50 mm dia nominal bore)
60
-
-
Providing and fixing ball valve (brass) of approved quality complete (50 mm nominal bore )
2
-
-
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore
9
-
-
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore
10
-
-
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore
29
-
-
Providing and fixing uplasticised PVC connection pipe with brass unions : 300mm long X 15 mm nominal bore
33
-
-
Providing and fixing gun metal non- return valve of approved quality (screwed end) : 50 mm nominal bore
1
-
-
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
15000
-
-
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:
a) Applying a slurry coat of neat cement using 2.75 kg/sum. of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment.
b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs
c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/ sum of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge.
d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3mm deep.
e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120mm and minimum thickness at khurra as 65 mm.
68
-
-
Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber
brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. For vertical surface two coats @ 0.70 kg per sqm
176
-
-
Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber
brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. For horizontal surface one coat @1.10 kg per sqm.
105
-
-
Providing and applying of swellable type water stop tape, 19mm x 25mm thick in linear meter (expansive nature) for construction joints treatment of RCC structure such as raft slab, retaining walls, water storage tank and at the junctions of raft slab with the retaining walls etc.. After cleaning the surface, one coat of required primer for swellable water stop tape shall be applied throughout the length of the joint @3.78 litre per 240 running meter. Over the primed surface swellable type water stop tape shall be placed. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge. The product performance shall carry guarantee for 10 years against any leakage.
120
-
-
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars 100 mm dia. R.C.C. pipe
80
-
-
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars300 mm dia. R.C.C. pipe
535
-
-
Excavation in Soil with Dozer with lead upto 100 m Excavation for roadway in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 m, including trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections.
396
-
-
Compacting original ground supporting subgrade Loosening of the ground upto a level of 300 mm below the subgrade level, watered, graded and compacted in layers to meet requirement of Tables 300.1 and 300.2 for subgrade construction as per Technical Specification Clause 303.5.2.
270
-
-
WBM Grading 3
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. By Mechanical Means
67.5
-
-
Concrete with cement, coarse sand and 40 mm gauge stone ballast in proportion 1:4:8 in foundations and floors including supply of all material, labour and T&P etc. required for proper completion of the work. as per drawings and technical specifications Clause 802, 803, 1202 & 1203
90
-
-
Cement Concrete (PCC M-30) Pavement:- Construction of Un-reinforced, Cement concrete pavement, thickness as per design, over a prepeared sub base with 43 grade cement or any other type PCC Grade M-30, coarse and fine aggregates conforming to IS: 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less then 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (Steel channel, laying and fixing of wedges, steel plates including levelling the formwork and laying and fixing of 125 micron thick polythene film, as per drawing), spreading the concrete with shovels, rakes, compacted using needle, and plate vibrators, finished in continuous operation and curing of concrete slabs for 14 days, using curing compound where specified and water finishing to lines and grade as per drawings and technical specifications
112.5
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5sqmm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5sqmm. FR PVC insulated copper conductor single core cable etc as required. Group C
176
-
-
Wiring for twin control light point with 1.5sqmm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5sqmm. FR PVC insulated copper conductor single core cable etc as required.
1
-
-
Wiring for light/ power plug with 2X4sqmm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit alongwith 1 No 4sqmm FR PVC insulated copper conductor single core cable for loop earthing as required.
170
-
-
Wiring for light/ power plug with 4X4sqmm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit alongwith 2 Nos 4sqmm FR PVC insulated copper conductor single core cable for loop earthing as required.
20
-
-
Wiring for circuit/ submain wiring alongwith earh wire with the following sizes of PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required 2 x 1.5sqmm + 1 x 1.5sqmm earth wire (for light CKTs & Light Plugs)
900
-
-
Wiring for circuit/ submain wiring alongwith earh wire with the following sizes of PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required 4 x 6sqmm + 2 x 6sqmm earth wire
10
-
-
Wiring for circuit/ submain wiring alongwith earh wire with the following sizes of PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required 4 x 10sqmm + 2 x 10sqmm earth wire
14
-
-
Wiring for circuit/ submain wiring alongwith earh wire with the following sizes of PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required 4 x 16sqmm + 2 x 16sqmm earth wire
17
-
-
Supplying and drawing following pair, 0.5sqmm FR PVC insulated copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 2 Pair
50
-
-
Supplying and fixing of following sizes of PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm (for telephone wire)
20
-
-
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required. 200 mm x 300 mm x 60 mm deep (in elect.niches)
3
-
-
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Telephone socket outlet
1
-
-
Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
44
-
-
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
18
-
-
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 1 or 2 Module (75mmX75mm) (for telephone)
1
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection, painting etc. as required. (For light plugs to be used in non residential buildings).
71
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 & 5/6 amps modular socket outlet and 15/16 amps modular switch, connection, painting etc. as required.
15
-
-
Supplying and fixing 3 pin, 5 amp. ceiling rose on the existing junction box/ wooden block including connection etc as required.
8
-
-
Supplying and fixing brass batten/angle holder including connection etc. as required.
62
-
-
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/ RCCB/Isolator) 4 way (4 + 12), Double door
1
-
-
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/ RCCB/Isolator) 6 way (4 + 18), Double door
1
-
-
Supplying and fixing following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's, with provision of 100 amps TP 16 KA MCCB as incomer, interconnection between incomer MCCB and bus bars (but without MCB's/ MCCB) as required. (Note: Vertical type MCB TP DB is normally used where 3 phase outlets are required) 8 Way TP
1
-
-
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole
48
-
-
Providing and fixing M.V. danger notice plate of 200 mm x 150 mm, made mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
1
-
-
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
2
-
-
Earthing with G.I. earth plate 600 mm x 600 mm x 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
2
-
-
Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.
46
-
-
Providing and fixing 25 mm x 5 mm G.I. strip on surface or inrecess for connections etc. as required.
14
-
-
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.
80
-
-
Supplying and making indoor end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ x 70sqmm (38mm)
2
-
-
Supply, erection of Hexagonal Fan Box made out of 16G sheet and fan hook made out of 12mm thick round MS bar of suitable size 'U' shaped. The fan box should have sufficient knock outs for incoming and outgoing pipes. The fan box is to be covered with 3mm thick bakelite sheet from the bottom. The job includes cost of all above materials and labour required.
44
-
-
Supply, Erection, testing & commissioning of box type fitting / Industrial type fitting / CFL fitting complete with Cu wound choke, CFL lamp / energy saving tube rod T-5, directly on wall / ceiling / false ceiling with screws etc. and making connections with cost of PVC Cu connection wire, screws etc. 1x28W box type fitting TMS122 M 1xTL528W EBE Phillips make with 28W tube rod or its equivalent.
57
-
-
Supply, Erection, testing & commissioning of box type fitting / Industrial type fitting / CFL fitting complete with Cu wound choke, CFL lamp / energy saving tube rod T-5, directly on wall / ceiling / false ceiling with screws etc. and making connections with cost of PVC Cu connection wire, screws etc. 2x28W box type fitting TMS122 2xTL528W MEBE Phillips make with 2Nos. 28W tube rod or its equivalent.
2
-
-
Supply, Erection, testing & commissioning of box type fitting / Industrial type fitting / CFL fitting complete with Cu wound choke, CFL lamp / energy saving tube rod T-5, directly on wall / ceiling / false ceiling with screws etc. and making connections with cost of PVC Cu connection wire, screws etc. 2x28W mirror optical fitting with 28W T-5 tube rod Phillips make TCS350/228 EBEC5 or its equivalent Wipro / Bajaj make.
4
-
-
Supply, erection, testing and commissioning of ceiling fan / wall fan / exhaust fan complete with blades etc. and cost of connection wire. Ceiling fan 1200mm size with double ball-bearing.
44
-
-
Supply, erection, testing and commissioning of ceiling fan / wall fan / exhaust fan complete with blades etc. and cost of connection wire. Fresh air fan 250mm size complete with built in louver
3
-
-
S/E of A.C. Exhaust fan (ISI Marked Chrompton / Bajaj make) suitable for single phase A.C. 230 Volts, 50 HZ capacitor,900 RPM (Heavy Duty) complete with mounting ring frame with four fixing holes and automatic louver shutter but without regulator. The exhaust fan is to be fixed in the existing glazing with suitable MS frame of required thickness as per site including its painting etc. as per site requirement. Size 380mm sweep
6
-
-
S/I/T/C of 250W HPSV flood light fitting complete with integral control gear and 250W HPSV Son-T lamp fixed on the top of building. The fitting is to be fixed on angle iron frame made out of 50x50x5mm angle iron made U-shaped to be gripped on parapet of building. The fitting is to be fixed with nut-bolts on angle iron frame and should be adjustable by extending the arms of angle iron base. The job includes cost of the fitting, lamp, angle iron, erection , testing, commissioning of the fitting.
6
-
-
Supply and erection of MCCB / MCB 4/3/2pole in the existing enclosure including making connections. MCB 63A 4pole 10kA capacity
2
-
-
Supply and erection of MCCB / MCB 4/3/2pole in the existing enclosure including making connections. MCCB 63A 3pole 25kA capacity
1
-
-
Supply, fabrication and carriage of cubical type panel compartmentalized fabricated out of 14G CRCA sheet with internal member of 16G complete with erection of incoming and outgoing switchgear, supply and erection of busbars meters, indicators, cable end boxes as required. The panel shall be either floor standing type or wall mounted as per drawing and site. The panel shall be totally enclosed dust and vermin proof construction with square sections rubber gaskets. The floor mounted panels shall be strictly as per specifications. The busbar will be wrought aluminium E91E grade suitable for 50KA fault level for one second (The fabricator will have to give manufacturer's certificate of E91E grade wrought aluminium busbar). All four busbars should be insulated with colour should PVC heat shrinkable sleeves. The panel should be complete as per the drawing and includes all internal wiring with PVC copper cable of requisite size complete with name plates of each feeder, danger plate, solid bus connections, cable alleys, busbar chamber etc. and other petty material The panel will be powder coated after chemical treatment. The degree of protection panel should be IP54 and should be extendable on both sides. All MCCBs are to be provided with extended rotary handles and spreaders for proper termination of cables. All MCBs are to be 'C' series INCOMER 125A 4P MCCB with thermal magnetic release 35KA = 1No.S/E of Bus bar 150A TPN with GI strip electrolytic grade with DMC insulators and heat shrink sleeve with extendable provision to connect to second future panel = 1No.Supply, erection, testing and commissioning of 1 sets of 3phase indicator lamp, 1 Nos. voltmeter 0-500V digital and 2 Nos. selector switch with protect MCB fuse, Digital ammeters with CT 125/5A=1No., 3Phase electronic energy meter complete as per load requirement.OUTGOING 63A 4P MCCB with thermal magnetic release 25KA = 1No .63A 4P MCB 10KA = 4No.32A 4P MCB 10KA = 1No.
1
-
-
Supply & laying of LT cables in excavated trenches, concrete trenches, along walls, through DWC pipes, cable trays etc. with testing and commissioning. The cable shall be 1.1KV grade, aluminium LT XLPE armoured ISI marked of approved make as per following sizes. The scope includes supply & fixing of clamps/saddles hardware for dressing of cable. Job to be done as per drawing, specifications and instructions of consultant. Testing of cables and submission of test report before and after laying of the cable shall form a part of the contractors job.3.5x70 mm2 LT XLPE Al Conductor Cable
20
-
-
Supply & laying of LT XLPE cables 1100V grade aluminium conductor armoured ISI marked of approved make as per following sizes. The cable to be laid 0.75m deep after excavating the earth and covered with sand and bricks as per CPWD specifications. The scope includes supply & laying of cable including cost of sand bricks and labour required for excavation, carriage of cable and other petty material required to complete the job. 3.5x70 mm2 LT XLPE Al Conductor Cable
60
-
-
Supply & laying of LT XLPE cable 6sqmm 4C 1100V grade aluminium conductor armoured ISI marked of approved make on existing surface with GI saddles / clamps as required at site at suitable distance. The scope includes supply & laying of cable including cost of saddles / clamps and labour required for fixing and carriage of cable and other petty material required to complete the job.
90
-
-
Supplying and laying of the following sizes of DWC pipe of reputed make complete with bend, socket etc. to be laid 2feet below ground level after excavating the earth / RCC floor and covering the pipe with dug out earth and repairing the floor etc. as per site requirements. 120/103.5mm dia
24
-
-
Supply and erection of PVC junction box Hensel make size 200x160mm with openable cover and 2 nos. clamps and 4 Nos. terminals. A kit-kat 16A 240V is also to be provided in box. The box is to be fixed along existing wall with provision of incoming and outgoing cables. The job includes cost of all material and labour required.
7
-
-
Boring/drilling bore well of required dia for casing/ strainer pipe, bysuitable method prescribed in IS: 2800 (part I), including collectingsamples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools,plants & machineries required for the job, all complete as per directionof Engineer -in-charge, upto 90 metre depth below ground level. 300 mm dia Up to 90 mt
160
-
-
Supplying, assembling, lowering and fixing in vertical position inbore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/ plain ended casing pipes of required dia,conforming to IS: 4270, of reputed & approved make, including paintedwith outside surface with two coats of anticorrosive paint of approvedbrand and manufacture, including required hire & labour charges,fittings & accessories, all complete, for all depths, as per directionof Engineer-in-charge. 200 mm nominal size dia
160
-
-
Supplying, assembling, lowering and fixing in vertical position inbore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/ plain ended casing pipes of required dia,conforming to IS: 4270, of reputed & approved make, including paintedwith outside surface with two coats of anticorrosive paint of approvedbrand and manufacture, including required hire & labour charges,fittings & accessories, all complete, for all depths, as per directionof Engineer-in-charge. 100 mm nominal size dia having minimum wall thickness 5.00 mm
160
-
-
Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/ 3.2 mm) mild steel threaded and socketed / plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer –in-charge. 100 mm nominal size dia
15
-
-
Providing and fixing suitable size threaded mild steel cap or spotwelded plate to the top of bore well housing/ casing pipe, removableas per requirement, all complete for borewell of:100 mm dia
1
-
-
Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of tubewell as per IS: 2800 (part I), including necessarybolts & nuts of required size complete.
1
-
-
Providing and fixing Bail plug/ Bottom plug of required dia to thebottom of pipe assembly of tubewell as per IS:2800 (part I).
2
-
-
Supply testing and lowering of suitable size submersible pumping plant of KSB or equivalent make 20 hp 3 phase submersible pump ( Variable discharge according to the lead 180 to 210 lpm at 120 m head ) i/c 4Sqm x 4 core copper cable weather proof cable and automatic control electrical panel and starter L&T make with necessary fitting and Gate / sluice valve. complete in all respect
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements