Bridge Ropeway Tunnel And Other Infrastructure Development Corporation Of Uttarakhand Limited Tender

The main desk of table shall be of size 1800 Width mm x 900 Depth mm x 750 Height mm.The table top shall be 25 mm thick MFC (Melamine Faced Chipboard) also there should be 30 mm MDF black pad.The modesty panel shall be of 18 mm thick MFC .The leg of the main desk shall be of 25 mm MFC plus 30 mm MDF right and left pad.The main table should be of duck noise profile edge.

Joining table shall be of size 1200 Width mm x 1050 Depth mm x 750 Height mm.The leg of the joining table shall be of metal. PU Coated joining table.

The Mobile Pedestal size shall be 400 Width mm x 560 Depth mm x 560 Height mm.The top panel shall be 25 mm thick MFC plus all the other panels shall be 18 mm thick coat.In Mobile pedestal lock and Castors shall be Provided. The handle shall be of Metal.

The return desk size shall be 1200 Width mm x 600 Depth mm x 730 Height mm.The top panel shall 25 mm thick MFC .The leg of the return desk shall be 25 mm thick MFC (Melamine faced chipboard) plus the right and left pad should be 30 mm thick MDF .

The bookcase size shall be 790 Width mm x 400 Depth mm x 2200 Height mm.The top panel shall be 25 mm thick MFC .The wood door panels shall be 18 mm thick MFC .The glass door panels shall be of 5 mm thick .The handles shall be of metal.

The back unit size shall be 1400 Width mm x 470 Depth mm x 760 Height mm.The top panel size shall be 25 mm thick MFC.The handle shall be of metal.

HIGH BACK CHAIR FOR DGP

The Cushioned seat should be upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. *Seat SIZE : 47.0 cm. (W) x 48.0 cm. (D) ...The product shall have Greenguard by UL Environment, Indoor Advantage Gold certificate.GRIHA and SAVGRIHA ..BIFMA Level 2 cretificate. HIGH BACK SIZE: 47.7 cm. (W) x 76.4 cm ARMRESTS : adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S. E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps. ACTIVE BIO-SYNCHRO MECHANISM : The adjustable tilting mechanism should be designed with the following features: • 360' revolving type. • Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. • Tilt tension adjustment can be operated in seating position. • 5-position Tilt limiter giving option of variable tilt angle to the chair. • Seat/back tilting ratio of 1: 2 • The mechanism housing should be made up of HPDC Aluminium black powder coated. SEAT DEPTH ADJUSTMENT : Seat depth adjustment should be integrated in the seat through a sliding mechanism. Seat depth adjustment range should be of 6.0±0.5 cm. Back Frame should be connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need. The pedestal should be High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The twin wheel castors should be injection moulded in black PP having 6.0± 0.1cm wheel Diameter.

VISITOR CHAIR FOR DGP

The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. ..The product shall have Greenguard by UL Environment, Indoor Advantage Gold certificate.GRIHA and SAVGRIHA ..BIFMA Level 2 cretificate.*Seat SIZE : 47.0 cm. (W) x 48.0 cm. (D) BACK ASSEMBLY: The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Leatherette. BACK SIZE: 47.7 cm. (W) x 60.1 cm. (D) Visitor TUBULAR FRAME: The tubular frame should be cantilever type and made of Ø2.54± 0.03 cm X 0.02 ± 0.016cm thick SS 202 tube. The back should be connected to frame through chrome plated high pressure die case connector piece

10 SEATER CONFERENCE TABLE

3000 X 1150 X 740

Work top-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade.conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access panels provided with soft closing hinges.The product shall have GREENGUARD by UL Environment,C II Greenpro Certificate and Indoor Advantage Gold Certificate and GRIHA Certificate Understructure-The Under-structure consists of mixture of 25mm and 18mm Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Anodised aluminium alloy 63400 - WP profile is added at bottom edges for improving the aesthetics. The product has a knock-down construction. Wire Management-Bottom cabinet with door is provided for flow of wires and cables. Cutout provision below Access flap at four locations for standard 8 module Anchor Roma is provided. Beside each cutout, an additional cutout with plate is provided for mounting Audio Visual Cables (eg. HDMI,VGA-A,etc).

CONFERENCE CHAIR

TheMid Back chair seat is made up of 1.2 +0 1cm thick hot pressed plywood upholstered with synthetic leather and moulded Polyurethane Foam The back is made up1.2 TO 1cm thick hot pressed plywood measured as per QA method described inOCP-QLTA-P14-18 and upholstered with replaceable synthetic leather upholstery covers and moulded polyurethane foam .The back ply and foam is designed with contoured lumber support for comfortable seating posture,mid back size 48.5 cm (W) X 64.5 cm (H) *SEAT SIZE 51.0 cm (W) X 48.0 cm (D). ARMRESTS (FiXED):The armrest top is moulded from polyurethane(PU) and mounted on to a fixed type tubular armrest tube having chrome plated finishKNEE TILT SYNCHRO 360° revolving type Single point control Single point control Front pivot for tilt with feet resting on ground The back rest is connected to the mechanism with a drop-iift mechanism which can be adjusted in the range of 7.0 IO.5cm. and locked in 5 positions for the better lumbar support. The pneumatic height adjustment has an adjustment stroke of 10.010.3 cm. The pedestal is fabricated from 0.0 +- 0.02 cm thick HR sheet, chrome plated and assémbled with injection moulded black polypropylene hub cap and 5 nos. twin wheel castors. The pedestal is 66.010.Scm. Pitch-center dia. (76.011.0 cm with castors). TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in black Nylon. Mid Back (W)76.*(D)76*(H)96.5-106.5 (SH)47.5-57.5 cm

SOFA FOR DGP OFFICE 3 SEATER

seat foam: the seat should be made of pu foam with density 32 ± 2 kg/cu.mtr having an additional top layer of j pu foam with density 28 ± 2 kg/cu. seat should be upholstered with fabric or leatherette. 2) back foam: the back should be made of pu foam with density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 23±2 kg/cu. mtr, upholstered with fabric or leatherette understructre : understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood ocp-qlta-pl14-18 4. dia 4mm zigzag spring assembly should be mounted in understructure for support and additional cushioning purpose leg assembly: it should be a welded assembly made in stainless steel (grade ss 202) tube & plate.Width (W): 205.5 CM. Depth (D): 92.0 CM. Height (H): 82.0 CM. Seat Height (SH): 45.0 CM.

SOFA FOR DGP OFFICE 2 SEATER

seat foam: the seat should be made of pu foam with density 32 ± 2 kg/cu.mtr having an additional top layer of j pu foam with density 28 ± 2 kg/cu. seat should be upholstered with fabric or leatherette. 2) back foam: the back should be made of pu foam with density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 23±2 kg/cu. mtr, upholstered with fabric or leatherette understructre : understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood ocp-qlta-pl14-18 4. dia 4mm zigzag spring assembly should be mounted in understructure for support and additional cushioning purpose leg assembly: it should be a welded assembly made in stainless steel (grade ss 202) tube & plate.Width (W): 146.0 CM. Depth (D): 92.0 CM. Height (H): 82.0 CM. Seat Height (SH): 45.0 CM.

Coffee Table FOR DGP OFFICE

Overall Size : Width : 100cm Depth : 65cm Height : 45cmTABLE LEGS METERIALS:Color :cherry,TABLE TOP MATERIALS & SIZE : (tempered Glass/ 10mm),L X W X T : 1000x650x10mm Color : clear

CornerTable FOR DGP OFFICE

Overall Size : Width : 53cm Depth : 45cm Height : 45cmTABLE METERIALS & SIZE :TOP: SOLID VENEER MDF TABLE TOP WITH 18 mm . LEGS: SOLID RUBBER WOOD.Color : CAPPUCINO

DGP Rest Room

Single Bed with mettress and 2 Pillow FOR DGP REST ROOM

Overall Size :Length - 2060.0 mmWidth - 1131.0 ram Height - 945.0 mm Material:Bed Structure consist of metal frames made of M.S. Channels in 1.0 mm Thickness.Horizontal plinths and bottom plinth are made of 25 mm Thick Prelaminated Particle Board.Head board is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed to it.Tail board is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed to it. The product shall be Greenpro Certified. Side rail is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed on to it.Mattress panels of Bed are made of 18 mm thick Prelaminated Particle Board with all the exposed edges are edge banded with 0.8 mm thick PVC edge banding. Construction :Knock Down construction.Packets : 1 Bed in 1 packets. Finish :18 mm thick Prelaminated Particle Board is in Walnut shade. Metal frames are powder coated in shade Mat Black to the thickness of 50 microns(+-10).

A 2 DGP

TABLE 6FT WITH RETURN UNIT 4FT AND PEDESTAL

1800x2100x750 Primary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Soft closing access flap with in-build power box are provided on work surface for wire management Secondary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The product should have Green Guard by UL Certificate,Indoor Advantage Gold Certificate,GRIHA Certificate,CII Green Prtow Certificate Modesty Panel Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Under structure Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Integrated Pedestal Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedestal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for security.

HIGH BACK CHAIR FOR A2 DGP

TheHigh Back chair seat is made up of 1.2 +0 1cm thick hot pressed plywood upholstered with synthetic leather and moulded Polyurethane Foam The back is made up1.2 TO 1cm thick hot pressed plywood measured as per QA method described inOCP-QLTA-P14-18 and upholstered with replaceable synthetic leather upholstery covers and moulded polyurethane foam .The back ply and foam is designed with contoured lumber support for comfortable seating posture,mid back size 48.5 cm (W) X 64.5 cm (H) *SEAT SIZE 51.0 cm (W) X 48.0 cm (D). ARMRESTS (FiXED):The armrest top is moulded from polyurethane(PU) and mounted on to a fixed type tubular armrest tube having chrome plated finishKNEE TILT SYNCHRO 360° revolving type Single point control Single point control Front pivot for tilt with feet resting on ground The back rest is connected to the mechanism with a drop-iift mechanism which can be adjusted in the range of 7.0 IO.5cm. and locked in 5 positions for the better lumbar support. The pneumatic height adjustment has an adjustment stroke of 10.010.3 cm. The pedestal is fabricated from 0.0 +- 0.02 cm thick HR sheet, chrome plated and assémbled with injection moulded black polypropylene hub cap and 5 nos. twin wheel castors. The pedestal is 66.010.Scm. Pitch-center dia. (76.011.0 cm with castors). TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in black Nylon. Mid Back (W)76.*(D)76*(H)96.5-106.5 (SH)47.5-57.5 cm

VISITOR CHAIR FOR A2 DGP

The seat is made up of 1.2 +0 1cm thick hot pressed plywood upholstered with synthetic leather and moulded Polyurethane Foam The back is made up 1.2 TO 1cm thick hot pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with replaceable synthetic leather upholstery covers and moulded polyurethane foam The back ply and foam is designed with contoured lumber support for comfortable seating posture *SIZE 48.5 cm (W) X 64.5 cm (H) *SEAT SIZE 51.0 cm (W) X 48.0 cm (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: ARMRESTS (FiXED):The armrest top is moulded from PU and mounted on to a fixed type tubular armrest support made of 03 81+0 03 cm x 0.210.01 cm thk M S E R W tube having chrome plated finish. The seat and back are arrested together with fixed type spine i.e no back up/down adjustment; made of 0.8 TO.05 cm thk HR Steel and is blackpowder-coated ( DFT 40-60 microns ) ARMRESTS (FiXED):The armrest top is moulded from polyurethane(PU) and mounted on to a fixed type tubular armrest support made of 03 81+0 03 cm x 0.210.01 cm thk M S E R W tube having chrome plated finish.

2 SEATER SOFA FOR A2 DGP

Overall Size :Width : 132cm Depth : 86cm Height : 77cm Seating Height : 39cmFrame material : tropical solid wood , Seat foam : polyurethane foam with recron layer. Foam density : 18 kg/ cubic cm. Back foam : polyurethane foam with silicon fill At arms. Foam density : 22 kg/cubic cm

3 SEATER SOFA FOR A2 DGP

Overall Size :Width : 171cm Depth : 86cm Height : 77cm Seating Height : 39cmFrame material : tropical solid wood , Seat foam : polyurethane foam with recron layer. Foam density : 18 kg/ cubic cm. Back foam : polyurethane foam with silicon fill At arms. Foam density : 22 kg/cubic cm

CENTER TABLE FOR A2DGP

center table glass top: it should be 12 ±0.3 mm thick black tinted toughened glass uv glued with bushes made in ss 202 grade for fixing with understructure. pshould be a center table understructure : it should be a welded assembly made in ss202 grade having dia. 12±0.04 as per should be :1762. Width of table= 112.0 cm, Depth=60.0 cm, height=35.1 cm.

PRO Office

TABLE FOR PRO OFFICE

Size shall be 1500 Width mm x 750 Depth mm x 740 Height mm .Table top shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick backing laminate (bdl) .Flat edge Duly sealed with 2 mm thick PVC beading.The modesty shall be 18 mm thick plain particle board ( ) PPB Clad with 1.0 mm thick decorative laminate (DL) on both sides. Edge Sealed with 2 mm thick PVC beading.

ERU size shall be 1050 Width x 450 Depth x 705 Height.The top of eru shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick Backing Laminate ( BDL).Flat Edge duly sealed with 2 mm thick PVC beading. The Modesty shall be 18 mm thick plain particle board (PPB) Clad with 1.0 mm thick Decorative Laminate (DL) on both sides. Edge sealed with 2 mm thick PVC Beading.

HIGH BACK CHAIR FOR PRO

The HB chair seat and back should be made up of 1.2 ±0.1cm. thick hot-pressed plywood and upholstered with .fabric upholstery covers and moulded polyurethane foam. the back foam should be designed with contoured lumbar support for extra comfort. the seat has extra thick foam on front edge to give comfort to popliteal area. back size 47.5 cm. (w) x 69.5 cm (h)seat size 47.0 cm. (w) x 48.0 cm. (d) high resilience (hr) polyurethane foam: the hr polyurethane foam should be moulded . Armrests :the one-piece armrests should be injection moulded from black co-polymer polypropylene. center tilt synchro mechanism: the mechanism should be designed with the following features: The Product should have indoor Gold Certificate,CII Greenpro Certificate • 360° revolving type. • upright-position locking • tilt tension adjustment • seat/back tilting ratio of 1:3. pneumatic height adjustment: the pneumatic height adjustment has an adjustment stroke of 12.0 ±0.3cm. pedestal assembly:the pedestal should be injection moulded in black 33% glass-filled nylon-66 and fitted with 5 nos. twin wheel castors. the pedestal should be 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors). twin wheel castors:the twin wheel castors should be injection moulded in black nylon.Overall Dimensions of ChairSeat Height - min 42.5 to max 54.5cm. Height - min97.0 to max 109.0cm. Width & Depth of Chair as measured from pedestal - Width-76.3 cm and Depth-76.3 cm.

VISITOR CHAIR FOR PRO OFFICE

Visitor chair seat/back assembly: the seat and back should be made up of 1.2 ±0.1cm. thick hot-pressed plywood and upholstered with .fabric upholstery covers and moulded polyurethane foam. the back foam should be designed with contoured lumbar support for extra comfort. the seat has extra thick foam on front edge to give comfort to popliteal should be a. back size 47.5 cm. (w) x58.0 cm (h)seat size 47.0 cm. (w) x 48.0 cm. (d) .high resilience (hr) polyurethane foam: the hr polyurethane foam should be moulded with density = 45±2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. 3. 3.armrests :the one-piece armrests should be injection moulded from black co-polymer polypropylene. tubular frame: the powder coated ( dft 40-60 microns ) tubular frame should be cantilever type & made of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. m.s. er.w. tube. The Product should have indoor Gold Certificate,CII Greenpro Certificate

3 SEATER SOFA

Overall Size :Width : 171cm Depth : 86cm Height : 77cm Seating Height : 39cmFrame material : tropical solid wood , Seat foam : polyurethane foam with recron layer. Foam density : 18 kg/ cubic cm. Back foam : polyurethane foam with silicon fill At arms. Foam density : 22 kg/cubic cm

CENTER TABLE FOR PRO OFFICE

center table glass top: it should be 12 ±0.3 mm thick black tinted toughened glass uv glued with bushes made in ss 202 grade for fixing with understructure. pshould be a center table understructure : it should be a welded assembly made in ss202 grade having dia. 12±0.04 as per should be :1762. Width of table= 112.0 cm, Depth=60.0 cm, height=35.1 cm.

Waiting Area

2 SEATER SOFA

Overall Size :Width : 132cm Depth : 86cm Height : 77cm Seating Height : 39cmFrame material : tropical solid wood , Seat foam : polyurethane foam with recron layer. Foam density : 18 kg/ cubic cm. Back foam : polyurethane foam with silicon fill At arms. Foam density : 22 kg/cubic cm

3 SEATER SOFA

Overall Size :Width : 171cm Depth : 86cm Height : 77cm Seating Height : 39cmFrame material : tropical solid wood , Seat foam : polyurethane foam with recron layer. Foam density : 18 kg/ cubic cm. Back foam : polyurethane foam with silicon fill At arms. Foam density : 22 kg/cubic cm

CENTER TABLE FOR WAITING AREA

center table glass top: it should be 12 ±0.3 mm thick black tinted toughened glass uv glued with bushes made in ss 202 grade for fixing with understructure. pshould be a center table understructure : it should be a welded assembly made in ss202 grade having dia. 12±0.04 as per should be :1762. Width of table= 112.0 cm, Depth=60.0 cm, height=35.1 cm.

SIDE TABLE FOR WAITING AREA

PISA SIDE TABLE & CENTER TABLE GLASS: It is 10 ±0.3 mm thick black tinted Toughened glass UV glued with bushes made in SS 202 grade for focing with understructure. PISA SIDE & CENTER TABLE UNDERSTRUCTURE: It is a welded Assembly made in SS202 grade Dia. 12±0.04 as per IS:1762.Width of table= 60.0 cm, Depth=60.0 cm, height=34.9 cm.

C.A Room

TABLE FOR CA ROOM

Table size shall be 1500 Width mm x 750 Depth mm x 740 Height mm .Table top shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick backing laminate (bdl) .Flat edge Duly sealed with 2 mm thick PVC beading.The modesty shall be 18 mm thick plain particle board ( ) PPB Clad with 1.0 mm thick decorative laminate (DL) on both sides. Edge Sealed with 2 mm thick PVC beading.

ERU RHS size shall be 1050 Width x 450 Depth x 705 Height.The top of ERU LHS shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick Backing Laminate ( BDL).Flat Edge duly sealed with 2 mm thick PVC beading. The Modesty shall be 18 mm thick plain particle board (PPB) Clad with 1.0 mm thick Decorative Laminate (DL) on both sides. Edge sealed with 2 mm thick PVC Beading.

MID BACK CHAIR FOR CA ROOM

The MB chair seat and back should be made up of 1.2 ±0.1cm. thick hot-pressed plywood and upholstered with .fabric upholstery covers and moulded polyurethane foam. the back foam should be designed with contoured lumbar support for extra comfort. the seat has extra thick foam on front edge to give comfort to popliteal area. back size 47.5 cm. (w) x 69.5 cm (h)seat size 47.0 cm. (w) x 48.0 cm. (d) high resilience (hr) polyurethane foam: the hr polyurethane foam should be moulded . Armrests :the one-piece armrests should be injection moulded from black co-polymer polypropylene. center tilt synchro mechanism: the mechanism should be designed with the following features: The Product should have indoor Gold Certificate,CII Greenpro Certificate • 360° revolving type. • upright-position locking • tilt tension adjustment • seat/back tilting ratio of 1:3. pneumatic height adjustment: the pneumatic height adjustment has an adjustment stroke of 12.0 ±0.3cm. pedestal assembly:the pedestal should be injection moulded in black 33% glass-filled nylon-66 and fitted with 5 nos. twin wheel castors. the pedestal should be 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors). twin wheel castors:the twin wheel castors should be injection moulded in black nylon.Overall Dimensions of ChairSeat Height - min 42.5 to max 54.5cm. Height - min85.5 cm to max 97.5cm. Width & Depth of Chair as measured from pedestal - Width-76.3 cm and Depth-76.3 cm.

VISITOR CHAIR FOR CA ROOM

Visitor chair seat/back assembly: the seat and back should be made up of 1.2 ±0.1cm. thick hot-pressed plywood and upholstered with .fabric upholstery covers and moulded polyurethane foam. the back foam should be designed with contoured lumbar support for extra comfort. the seat has extra thick foam on front edge to give comfort to popliteal should be a. back size 47.5 cm. (w) x58.0 cm (h)seat size 47.0 cm. (w) x 48.0 cm. (d) .high resilience (hr) polyurethane foam: the hr polyurethane foam should be moulded with density = 45±2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. 3. 3.armrests :the one-piece armrests should be injection moulded from black co-polymer polypropylene. tubular frame: the powder coated ( dft 40-60 microns ) tubular frame should be cantilever type & made of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. m.s. er.w. tube. The Product should have indoor Gold Certificate,CII Greenpro Certificate

ALMIRAH FOR CA ROOM

Almirah shall have an overall size of 916mm(W)x486mm(D)x1980mm(H) with welded construction. It should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. The Storwel Plain should have a Mazak handle and Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options shall be available The product should have Greenguard by UL Environment and GRIHA Certificate and CII Green Pro Certificate

MID BACK CHAIR FOR WORKSTATION

The MB chair seat and back should be made up of 1.2 ±0.1cm. thick hot-pressed plywood and upholstered with .fabric upholstery covers and moulded polyurethane foam. the back foam should be designed with contoured lumbar support for extra comfort. the seat has extra thick foam on front edge to give comfort to popliteal area. back size 47.5 cm. (w) x 69.5 cm (h)seat size 47.0 cm. (w) x 48.0 cm. (d) high resilience (hr) polyurethane foam: the hr polyurethane foam should be moulded . Armrests :the one-piece armrests should be injection moulded from black co-polymer polypropylene. center tilt synchro mechanism: the mechanism should be designed with the following features: The Product should have indoor Gold Certificate,CII Greenpro Certificate • 360° revolving type. • upright-position locking • tilt tension adjustment • seat/back tilting ratio of 1:3. pneumatic height adjustment: the pneumatic height adjustment has an adjustment stroke of 12.0 ±0.3cm. pedestal assembly:the pedestal should be injection moulded in black 33% glass-filled nylon-66 and fitted with 5 nos. twin wheel castors. the pedestal should be 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors). twin wheel castors:the twin wheel castors should be injection moulded in black nylon.Overall Dimensions of ChairSeat Height - min 42.5 to max 54.5cm. Height - min85.5 cm to max 97.5cm. Width & Depth of Chair as measured from pedestal - Width-76.3 cm and Depth-76.3 cm.

WORKSTATION 4 x 2

Tile based modular workstation, with partition thickness as 52 -53 mm and height ~ 1200 mm and depth ~ 600 mm including powder coated (Epoxy Polyster powder coating of 45-50 micron) aluminium trims. B. Fin: Top block finished in fabric and bottom block is finished in metal. PLB boards wrapped with laminate at intermediate level. 22.5 mm thick panel formed out of blocks which are 18 mm thick C. Tiles on main spine: Tiles are fixed on the frame verticals with the help of plastic buttons. The various finishes for the tiles are: a. Above worktop level: Fabric magnetic (Fabric magnetic tiles are fabric upholstered metal tiles in 0.6 mm thick M.S. CRCA Grade D as per IS:513 – 1994) of approved colour. b. Below worktop level: Plain metal tile (Plain Metal tiles are Epoxy Polyster powder coated of 45-50 micron in 0.6 mm thick M.S. CRCA Grade D as per IS:513 – 1994)D. Trims: The exposed edges of the frames shall be finished with aluminium trims available in flat profile. Powder coated aluminium alloy (of grade He-9 – 63400) Flat Trims are fitted on the top horizontal using M6 X 55L Nut-bolts & a spacer and the open vertical ends of the upright using M6 X 25L Bolt & Nut. E. Work surface: Worktop 25 mm thick pre-laminated (with PVC lipping) -Work top shall be made of 25mm thick pre-laminated particle board interior grade of approved shade conforming to IS:12823:1990 . Bottom shall have a backing laminate of minimum 0.6 mm thickness. All the edges of work surface shall be provided with machine pressed 2 mm thick PVC lipping glued with hotmelt EVA glue. Worktop size shall be 1200mm (l) X 600mm(d) Height of work surface – 750 mm (from floor level to top work surface). Work top shall be mounted onto the partition panels for work stations by means of cantilever brackets made from 2.0 mm thick CRCA grade D steel as per IS:513-1994 duly pretreated and powder coated in black colour. The work surface shall be provided with circular cut out of Dia.65mm as per the requirement, for passing of wires. These cut outs shall be provided with ABS covers.F. Pedestal: 2 Door one filer metal pedestal with central locking system (390W x 435D x 720H).G. Drawer Configuration /Product Size /styling: Free Standing Full Height Box-Box-File. Over closing. Construction &Material: Welded Assembled. 0.8 mm thick CRCA for Body Shell, Drawer Front & tray, Front Side Stiffener, Rear Side Stiffener & Bottom. 1.2 mm thick CRCA Top Stiffener & Bottom stiffener. H. Drawer Fronts: Metal Front Straight Edge. I. Drawer Specification: All Drawers with Double extension precision ball slide. 390 wide Pedestals File drawer - suitable for storing full-scape files in Depth wise manner. A4 files in width wise manner. In requisite deep units, 1 no of File hanger provided in File Drawer. For Drawer pulling, side wise tapered recess provided in shell behind Drawer Fronts with approved locking arrangement. J. Locking: 10 lever Cam Lock & Central RH locking with actuator & lock channel mechanism for ‘Box-Box-File’ Pedestal. K. Top Panel: Metal Straight Edge Top. L. Castor: Swiveling non-lockable Castors mounted below the body shell for Free Standing.M. Wire Management through main spine: Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. N. Legs: Metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. O. Anti-tipping: Fifth roller arrangement mounted below file drawer to avoid toppling of unit when file drawer is pulled out. P. Finish: Epoxy Polyester Powder coated to the thickness of 50 microns. Q. Accessories: Metal CPU Trolley and slide able Key Board Tray.Note: All partitions and side panels must have levelling screws for adjustment in case of uneven floor to take care of +/- 40 mm of uneven flooring.CERTIFICATION - BIFMA level-3 - ISO 9001:2015 certified - ISO 14001:2015 certified - ISO 18001:2007 certified Green guard certification

MEDIA CELL/ SPECIAL CELL

TABLE FOR MEDIA CELL/SPECIAL CELL

Table size shall be 1500 Width mm x 750 Depth mm x 740 Height mm .Table top shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick backing laminate (bdl) .Flat edge Duly sealed with 2 mm thick PVC beading.The modesty shall be 18 mm thick plain particle board ( ) PPB Clad with 1.0 mm thick decorative laminate (DL) on both sides. Edge Sealed with 2 mm thick PVC beading.

ERU RHS size shall be 1050 Width x 450 Depth x 705 Height.The top of RU -3616 LHS shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick Backing Laminate ( BDL).Flat Edge duly sealed with 2 mm thick PVC beading. The Modesty shall be 18 mm thick plain particle board (PPB) Clad with 1.0 mm thick Decorative Laminate (DL) on both sides. Edge sealed with 2 mm thick PVC Beading.

MID BACK CHAIR FOR MEDIA CELL/SPECIAL CELL

The MB chair seat and back should be made up of 1.2 ±0.1cm. thick hot-pressed plywood and upholstered with .fabric upholstery covers and moulded polyurethane foam. the back foam should be designed with contoured lumbar support for extra comfort. the seat has extra thick foam on front edge to give comfort to popliteal area. back size 47.5 cm. (w) x 69.5 cm (h)seat size 47.0 cm. (w) x 48.0 cm. (d) high resilience (hr) polyurethane foam: the hr polyurethane foam should be moulded . Armrests :the one-piece armrests should be injection moulded from black co-polymer polypropylene. center tilt synchro mechanism: the mechanism should be designed with the following features: The Product should have indoor Gold Certificate,CII Greenpro Certificate • 360° revolving type. • upright-position locking • tilt tension adjustment • seat/back tilting ratio of 1:3. pneumatic height adjustment: the pneumatic height adjustment has an adjustment stroke of 12.0 ±0.3cm. pedestal assembly:the pedestal should be injection moulded in black 33% glass-filled nylon-66 and fitted with 5 nos. twin wheel castors. the pedestal should be 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors). twin wheel castors:the twin wheel castors should be injection moulded in black nylon.Overall Dimensions of ChairSeat Height - min 42.5 to max 54.5cm. Height - min85.5 cm to max 97.5cm. Width & Depth of Chair as measured from pedestal - Width-76.3 cm and Depth-76.3 cm.

VISITOR CHAIR FOR MEDIA CELL/SPECIAL CELL

Visitor chair seat/back assembly: the seat and back should be made up of 1.2 ±0.1cm. thick hot-pressed plywood and upholstered with .fabric upholstery covers and moulded polyurethane foam. the back foam should be designed with contoured lumbar support for extra comfort. the seat has extra thick foam on front edge to give comfort to popliteal should be a. back size 47.5 cm. (w) x58.0 cm (h)seat size 47.0 cm. (w) x 48.0 cm. (d) .high resilience (hr) polyurethane foam: the hr polyurethane foam should be moulded with density = 45±2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. 3. 3.armrests :the one-piece armrests should be injection moulded from black co-polymer polypropylene. tubular frame: the powder coated ( dft 40-60 microns ) tubular frame should be cantilever type & made of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. m.s. er.w. tube. The Product should have indoor Gold Certificate,CII Greenpro Certificate

ALMIRAH FOR MEDIA CELL/SPECIAL CELL

Storwel plain shall have an overall size of 916mm(W)x486mm(D)x1980mm(H) with welded construction. It should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. The Storwel Plain should have a Mazak handle and Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options shall be available the product should have Greenguard by UL Environment and GRIHA Certificate and CII Green Pro Certificate

C.S.O. Office

TABLE FOR CSO OFFICE

Table size shall be 1500 Width mm x 750 Depth mm x 740 Height mm .Table top shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick backing laminate (bdl) .Flat edge Duly sealed with 2 mm thick PVC beading.The modesty shall be 18 mm thick plain particle board ( ) PPB Clad with 1.0 mm thick decorative laminate (DL) on both sides. Edge Sealed with 2 mm thick PVC beading.

ERU -3616 RHS size shall be 1050 Width x 450 Depth x 705 Height.The top of ERU -3616 LHS shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick Backing Laminate ( BDL).Flat Edge duly sealed with 2 mm thick PVC beading. The Modesty shall be 18 mm thick plain particle board (PPB) Clad with 1.0 mm thick Decorative Laminate (DL) on both sides. Edge sealed with 2 mm thick PVC Beading.

HIGH BACK CHAIR FOR CSO OFFICE

The High Back seat and back should be made up of 1.2 ±0.1cm. thick hot-pressed plywood and upholstered with .fabric upholstery covers and moulded polyurethane foam. the back foam should be designed with contoured lumbar support for extra comfort. the seat has extra thick foam on front edge to give comfort to popliteal area. back size 47.5 cm. (w) x 69.5 cm (h)seat size 47.0 cm. (w) x 48.0 cm. (d) high resilience (hr) polyurethane foam: the hr polyurethane foam should be moulded . Armrests :the one-piece armrests should be injection moulded from black co-polymer polypropylene. center tilt synchro mechanism: the mechanism should be designed with the following features: The Product should have indoor Gold Certificate,CII Greenpro Certificate • 360° revolving type. • upright-position locking • tilt tension adjustment • seat/back tilting ratio of 1:3. pneumatic height adjustment: the pneumatic height adjustment has an adjustment stroke of 12.0 ±0.3cm. pedestal assembly:the pedestal should be injection moulded in black 33% glass-filled nylon-66 and fitted with 5 nos. twin wheel castors. the pedestal should be 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors). twin wheel castors:the twin wheel castors should be injection moulded in black nylon.Overall Dimensions of ChairSeat Height - min 42.5 to max 54.5cm. Height - min97.0 to max 109.0cm. Width & Depth of Chair as measured from pedestal - Width-76.3 cm and Depth-76.3 cm.

VISITOR CHAIR FOR CSO OFFICE

Visitor chair seat/back assembly: the seat and back should be made up of 1.2 ±0.1cm. thick hot-pressed plywood and upholstered with .fabric upholstery covers and moulded polyurethane foam. the back foam should be designed with contoured lumbar support for extra comfort. the seat has extra thick foam on front edge to give comfort to popliteal should be a. back size 47.5 cm. (w) x58.0 cm (h)seat size 47.0 cm. (w) x 48.0 cm. (d) .high resilience (hr) polyurethane foam: the hr polyurethane foam should be moulded with density = 45±2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. 3. 3.armrests :the one-piece armrests should be injection moulded from black co-polymer polypropylene. tubular frame: the powder coated ( dft 40-60 microns ) tubular frame should be cantilever type & made of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. m.s. er.w. tube. The Product should have indoor Gold Certificate,CII Greenpro Certificate

3SEATER SOFA FOR CSO OFFICE

Overall Size :Width : 171cm Depth : 86cm Height : 77cm Seating Height : 39cmFrame material : tropical solid wood , Seat foam : polyurethane foam with recron layer. Foam density : 18 kg/ cubic cm. Back foam : polyurethane foam with silicon fill At arms. Foam density : 22 kg/cubic cm

CENTER TABLE FOR CSO OFFICE

center table glass top: it should be 12 ±0.3 mm thick black tinted toughened glass uv glued with bushes made in ss 202 grade for fixing with understructure. pshould be a center table understructure : it should be a welded assembly made in ss202 grade having dia. 12±0.04 as per should be :1762. Width of table= 112.0 cm, Depth=60.0 cm, height=35.1 cm.

ALMIRAH FOR CSO OFFICE

Storwel plain shall have an overall size of 916mm(W)x486mm(D)x1980mm(H) with welded construction. It should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. The Storwel Plain should have a Mazak handle and Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options shall be available.he product should have Greenguard by UL environment and GRIHA Certificate and CII Green Pro Certificate

SIXTH FLOOR

Conference Room

CONFERENCE TABLE 33 SEATER

Work Surface-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeconforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Plastic ABS access flap is provided for easy access to wires and cables. Work top is available in various shapes as shown above. Understructure-It consist of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Aluminium alloy 63400 - WP profile is used for connecting panels together. The product has a knock-down construction and Greenguard by UL ENvironment,Indoor AQdvantage Gold Certificate and Griha ertificateand CII Green Pro Certificate Modesty Panel-Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Powder coated accent metal strip provided below work surface to enhance aesthetics. It is made of 0.8mm CRCA as per IS 513,epoxy polyester powder coated (DFT 40-60 microns. Wire Management-An array of panels made of 0.8mm CRCA MS IS:513, epoxy polyester powder coated (DFT 40-60 microns) is used for flow of wires and cables. Provision to mount Anchor Roma 6 module plate is provided below worktop. Cutout on top with two piece injection moulded plastic part polymer component is fitted to pull out audio,video cables onto worktop and connect devices charger to power socket below worktop.

HIGH BACK CHAIR FOR CONFERENCE ROOM 6TH FLOOR

The seat should be made up of 1.2 ± 0.1cm. thick hot pressed plywood and upholstered with leather and moulded polyurethane foam. the back foam should be designed with contoured lumber support for extra comfort. the chair should be available in three models:back size:53.0cm.(w) x 80.0cm.(h) seat size:54.6cm.(w) x 49.0cm.(d) . the hr polyurethane foam should be moulded with density = 45 +/-2 kg/m³ and hardness load 16 ± 2 kgf for 25% compression the seat and back should be arrested together with spine made of 0.8 ±0.05 cm thk hr steel and should be black powder-coated ( dft 40-60 microns ) the armrest assy. should be comprised of three parts viz. the armrest support tube and p.u. armrest and the armrest top. the armrest tube assy. should be made of 2.54±0.03cm x 0.16±0.0128cm m.s. e.r.w. support tubes and chrome plated. the p.u. armrest should be made of black integral skin polyurethane with 50-70 shore 'a' hardness and reinforced with m.s. insert. the armrest top should be made of abs & upholstered with foam & leather. the mechanism should be designed with the following features: •360° revolving type. •seat back tilting ratio of 1 : 1.5 •front pivot for tilt with feet resting on ground ensuring more comfort. •tilt tension adjustment. •5-position locking with anti-shock back mechanism, which prevents the backrest from impacting the user when the lock should be released. •static seat depth adjustment = 5.0 ± 0.5cm with 5 position locking. it has an adjustment stroke of 9.0 ± 0.3cm the bellow should be 1 piece and blow moulded in black polypropylene the pedestal should be made of die-cast aluminium with buffing finish. it should be fitted with 5nos. twin wheel castor. the pedestal should be 67.0 ± 0.5cm pitch-center dia. (77.0 ± 1.0cm with castors) twin wheel castors: the twin wheel castors should be injection moulded in black nylon. Overall Dimensions of Chair Seat Height - min 49.9 to max 58.9 cm. Total Height - min 115.9 to 124.9 cm. Width & Depth of Chair as measured from pedestal - Width 77 cm and Depth 77 cm

MID BACK CHAIR FOR CONFERENCE ROOM 6TH FLOOR

SEAT/BACK ASSEMBLY: The seat is made up of 1.2 +0 1cm thick hot pressed plywood upholstered with fabric or synthetic leather and moulded Polyurethane Foam The back is made up 1.2 TO 1cm thick hot pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with replaceable fabric or synthetic leather upholstery covers and moulded polyurethane foam The back ply and foam is designed with contoured lumber support for comfortable seating posture *MID BACK SIZE 48.5 cm (W) X 64.5 cm (H) *SEAT SIZE 51.0 cm (W) X 48.0 cm (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam for seat and back is moulded with density = 45 +/-2 kg/m* and Hardness load 16 2 kgf as per IS 7888 for 25% compression ARMRESTS (FiXED):The armrest top is moulded from polyurethane(PU) and mounted on to a fixed type tubular armrest support made of 03 81+0 03 cm x 0.210.01 cm thk M S E R W tube having chrome plated finishKNEE TILT SYNCHRO MECHANISM WITH SEAT DEPTH ADJUSTMENT 360° revolving type Single point control Single point control Front pivot for tilt with feet resting on ground ensuring more comfort Tilt tension adjustment 4-position locking with anti-shock feature Seat back tilting ratio of 1.2 Seat depth adjustment of 6.0 +0 Scm can be locked in 6 positions FRONT PIVOT SYNCHRO MECHANISM: The mechanism is designed with the following features360° revolving type Single point control Front pivot for tilt with feet resting on ground ensuring more comfort Tilt tension adjustment 4-position locking with anti-shock feature knockdown condition vacations within +1 0 cm ADJUSTABLE BACKREST: The back rest is connected to the mechanism with a drop-iift mechanism which can be adjusted in the range of 7.0 IO.5cm. and locked in 5 positions for the better lumbar support. FIXED SPINE (COFERENCE/ VISITOR): The seat and back are arrested together with fixed type spine i.e no back up/down adjustment; made of 0.8 TO.05 cm thk HR Steel and is black powder-coated ( DFT 40-60 microns ) HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment stroke of 10.010.3 cm. PEDESTAL ASSEMBLY : The pedestal is fabricated from 0.0 +- 0.02 cm thick HR sheet, chrome plated and assémbled with injection moulded black polypropylene hub cap and 5 nos. twin wheel castors. The pedestal is 66.010.Scm. Pitch-center dia. (76.011.0 cm with castors). TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in black Nylon. Mid Back (W)76.*(D)76*(H)96.5-106.5 (SH)47.5-57.5 cm

VISITOR CHAIR FOR CONFERENCE ROOM 6TH FLOOR

SEAT/BACK ASSEMBLY: The seat is made up of 1.2 +0 1cm thick hot pressed plywood upholstered with fabric or synthetic leather and moulded Polyurethane Foam The back is made up 1.2 TO 1cm thick hot pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with replaceable fabric or synthetic leather upholstery covers and moulded polyurethane foam The back ply and foam is designed with contoured lumber support for comfortable seating posture *MID BACK SIZE 48.5 cm (W) X 64.5 cm (H) *SEAT SIZE 51.0 cm (W) X 48.0 cm (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam for seat and back is moulded with density = 45 +/-2 kg/m* and Hardness load 16 2 kgf as per IS 7888 for 25% compression ARMRESTS (FiXED):The armrest top is moulded from polyurethane(PU) and mounted on to a fixed type tubular armrest support made of 03 81+0 03 cm x 0.210.01 cm thk M S E R W tube having chrome plated finish FIXED SPINE (COFERENCE/ VISITOR): The seat and back are arrested together with fixed type spine i.e no back up/down adjustment; made of 0.8 TO.05 cm thk HR Steel and is blackpowder-coated ( DFT 40-60 microns ) ARMRESTS (FiXED):The armrest top is moulded from polyurethane(PU) and mounted on to a fixed type tubular armrest support made of 03 81+0 03 cm x 0.210.01 cm thk M S E R W tube having chrome plated finish Mid Back (W)66.5*(D)61.6*(H)93.2 (SH)47.7 CM

LOUNGE

3SEATER SOFA FOR LOUNGE 6TH FLOOR CONFERENCE ROOM

Overall Size : Width : 189cm Depth : 82cm Height : 90cm Seating Height : 45cmseat:Understructure: Understructure is made up of combination of plywood & pinewood members. Plywood is 12+1mm thk. [moisture resistance & termite proof as per IS:303] & pinewood are of cross sections 22x64mm, 34x64mm & 16x35mm without having major knots & defects on the surface. Zigzag spring of dia. 3.8mm is mounted on the seat structure using plastic spring mounting clip for support & additional cushioning purpose. Non woven fabric is stapled on the seat structure frame above the spring asly. to avoid direct contact between the metal springs and the seat foam. This prevents seat foam from tearing. Powder coated MS support pipe is fitted with the wooden seat frame to give additional strength to the structure. Complete understructure is made by gluing, nailing & stapling. Foam: Seat is made of PU foam with density 28 kg/m3 with a top layer of supersoft PU foam with density 32 kg/m3. Seat front bottom is stapled with the PU foam with density 28 kg/m3.Upholstery: Seat upholstery is made in polyester fabric with partitions.Backrest :Understructure: Understructure is made up of combination of plywood & pinewood members. Plywood is 12+1mm thk. [moisture resistance & termite proof as per IS:303] & pinewood are of cross sections 16x35mm & 16x74mm without having major knots & defects on the surface. 3mm MDF is stapled on the back of the structure and manjarpat is stapled at the front bottom.Foam: Backrest is made of PU foam with density 28 kg/m3 on the front lumber portion and the shoulder area has supersoft PU foam with density 32 kg/m3. This is covered with a top layer of supersoft PU foam with density 32 kg/m3. The top surface has foam with density 32 kg/m3. Complete back surface & underarm of backrest is glued with the PU foam with density 28 kg/m3. Upholstery: Backrest upholstery is made in polyester fabric and has a manjarpat cloth for pulling to accentuate the lumbar area. A throw cover is draped over the backrest, which can be dry cleaned.armrest:Understructure: Understructure is made of combination of plywood & pinewood members. Plywood is 12+1mm thk. [moisture resistance & termite proof as per IS:303] & pinewood are of cross section 16x35mm without having major knots & defects on the surface. 2mm cardboard and 3mm MDF is stapled on the structure to provide a surface for sticking foam.Foam: Armrest is made of PU foam with density 28 kg/m3. Upholstery: Armrest upholstery is made in polyester fabric. Legs: Rubberwood [Grade-A] legs with the M8 stud are fitted at the bottom surface of the Armrest LH & RH. Legs are coated with PU clear coat [matt finish].Assembly: Upholstered seat, backrest, armrest-LH & armrest-RH are assembled together with the M8 bolts, nuts & washer. Then a non-woven is stapled on the bottom surface to cover the structure.Packet: Each packet contains one assembled sofa without legs and a separate hardware packet containing 4 nos. of plastic legs.

2SEATER SOFA FOR LOUNGE 6TH FLOOR CONFERENCE ROOM

Overall Size : Width : 150cm Depth : 82cm Height : 90cm Seating Height : 45cmseat:Understructure: Understructure is made up of combination of plywood & pinewood members. Plywood is 12+1mm thk. [moisture resistance & termite proof as per IS:303] & pinewood are of cross sections 22x64mm, 34x64mm & 16x35mm without having major knots & defects on the surface. Zigzag spring of dia. 3.8mm is mounted on the seat structure using plastic spring mounting clip for support & additional cushioning purpose. Non woven fabric is stapled on the seat structure frame above the spring asly. to avoid direct contact between the metal springs and the seat foam. This prevents seat foam from tearing. Powder coated MS support pipe is fitted with the wooden seat frame to give additional strength to the structure. Complete understructure is made by gluing, nailing & stapling. Foam: Seat is made of PU foam with density 28 kg/m3 with a top layer of supersoft PU foam with density 32 kg/m3. Seat front bottom is stapled with the PU foam with density 28 kg/m3.Upholstery: Seat upholstery is made in polyester fabric with partitions.Backrest :Understructure: Understructure is made up of combination of plywood & pinewood members. Plywood is 12+1mm thk. [moisture resistance & termite proof as per IS:303] & pinewood are of cross sections 16x35mm & 16x74mm without having major knots & defects on the surface. 3mm MDF is stapled on the back of the structure and manjarpat is stapled at the front bottom.Foam: Backrest is made of PU foam with density 28 kg/m3 on the front lumber portion and the shoulder area has supersoft PU foam with density 32 kg/m3. This is covered with a top layer of supersoft PU foam with density 32 kg/m3. The top surface has foam with density 32 kg/m3. Complete back surface & underarm of backrest is glued with the PU foam with density 28 kg/m3. Upholstery: Backrest upholstery is made in polyester fabric and has a manjarpat cloth for pulling to accentuate the lumbar area. A throw cover is draped over the backrest, which can be dry cleaned. armrest: Understructure: Understructure is made of combination of plywood & pinewood members. Plywood is 12+1mm thk. [moisture resistance & termite proof as per IS:303] & pinewood are of cross section 16x35mm without having major knots & defects on the surface. 2mm cardboard and 3mm MDF is stapled on the structure to provide a surface for sticking foam.Foam: Armrest is made of PU foam with density 28 kg/m3. Upholstery: Armrest upholstery is made in polyester fabric. Legs: Rubberwood [Grade-A] legs with the M8 stud are fitted at the bottom surface of the Armrest LH & RH. Legs are coated with PU clear coat [matt finish].Assembly: Upholstered seat, backrest, armrest-LH & armrest-RH are assembled together with the M8 bolts, nuts & washer. Then a non-woven is stapled on the bottom surface to cover the structure.Packet: Each packet contains one assembled sofa without legs and a separate hardware packet containing 4 nos. of plastic legs.

COFFEE TABLE FOR LOUNGE 6TH FLOOR CONFERENCE ROOM

Overall Size : Width : 100cm Depth : 65cm Height : 43cmTABLE MATERIALS: Glass of 08 mm thk tempered, Solid rubber woood legs and frame, MS sheet as bottom shelf .DECORATION MATERIALS & SPECIFICATIONS: (DENSITY / TYPE): PU coating to the rubber wood parts, clear glass

CORNER TABLE FOR LOUNGE 6TH FLOOR CONFERENCE ROOM

Overall Size : Width : 60cm Depth : 60cm Height : 45cmTABLE MATERIALS: Glass of 08 mm thk tempered, Solid rubber woood legs and frame, MS sheet as bottom shelf .DECORATION MATERIALS & SPECIFICATIONS: (DENSITY / TYPE): PU coating to the rubber wood parts, clear glas