Bridge Ropeway Tunnel And Other Infrastructure Development Corporation Of Uttarakhand Limited Tender
View complete overview of Uttarakhand BRIDCUL Tender
Bridge Ropeway Tunnel And Other Infrastructure Development Corporation Of Uttarakhand Limited - BRIDCUL Tender
Eprocure
Opening Date28 Dec 2020
Closing Date4 Feb 2021
Tender Amount₹ 3,05,45,000
Costs
EMD
₹ 3,06,000Document Cost
₹ 5,900Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2020_BRID3_28468_1Bid Award Id
ViewTender No
1714/BRIDCUL/678/01/20 DATED 23.11.2020Tender Authority
Bridge Ropeway Tunnel And Other Infrastructure Development Corporation Of Uttarakhand Limited ViewPurchaser Address
-Website
http://http://bridcul.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
.Demolishing cement concrete manually/ by mechanical means
including disposal of material within 50 metres lead as per direction
of Engineer - in - charge.
-
-
-
Nominal concrete 1:3:6 or richer mix (i/c equivalent design
mix)
110.03
-
-
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
-
-
-
In cement mortar
118.92
-
-
Dismantling doors, windows and clerestory windows (steel or wood)shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:
-
-
-
Of area 3 sq. metres and below
76
-
-
Of area beyond 3 sq. metres
23
-
-
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :
-
-
-
Of area 3 sq. metres and below
43
-
-
Of area beyond 3 sq. metres
17
-
-
Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.
610
-
-
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
3423.29
-
-
Providing, erecting, maintaining and removing temporary protective screens made out of specified fabric with all necessary fixing arrangement to ensure that it remains in position for the work duration as required by the Engineer-in-charge.
-
-
-
Wooven PVC cloth
1451.5
-
-
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.
-
-
-
All kind
444
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
289.24
-
-
Supplying and filling in plinth with Jamuna sand under floors, including watering, ramming, consolidating and dressing complete.
30.84
-
-
Providing,and laying 75 mm thick compacted bed of dry brick aggregate of 40 mm thick nominal size including spreading, well ramming, consolidating and grouting with jamuna sand, including finishing smooth etc. complete as per direction of Engineer-in-charge.
183.26
-
-
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :
-
-
-
Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.:
-
-
-
With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration
265.78
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
26.79
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately).
-
-
-
All works upto plinth level
50.74
-
-
Extra for providing richer mixes at all floor levels.
-
-
-
Note:- Excess/less cement over the specified cement content used is payable /recoverable separately.
-
-
-
Providing M-30 grade concrete instead of M-25 grade BMC/ RMC. (Note:- Cement content considered in M-30 is @ 340 kg/ cum)
33.41
-
-
Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
Foundations, footings, bases of columns, etc. for mass concrete
61.98
-
-
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
185.12
-
-
Suspended floors, roofs, landings, balconies and access platform
151.58
-
-
Lintels, beams, plinth beams, girders, bressumers and cantilevers
66.76
-
-
Columns, Pillars, Piers, Abutments, Posts and Struts
21.6
-
-
Stairs, (excluding landings) except spiral-staircases
32.67
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
Thermo-Mechanically Treated bars of grade Fe-500D or more.
10837.18
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
-
-
-
Cement mortar 1:6 (1 cement : 6 coarse sand)
32.9
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
-
-
-
Cement mortar 1:6 (1 cement : 6 coarse sand)
35.21
-
-
Providing and laying autoclaved aerated cement blocks masonry with 100 mm thick AAC blocks in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand ). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work.
39.89
-
-
Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately).
143.35
-
-
Providing and fixing stone jali 40 mm thick throughout in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade, jali slab without any chamfers etc.
-
-
-
White sand stone
68.4
-
-
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
-
-
-
Granite of any colour and shade
-
-
-
Area of slab over 0.50 sqm
10.26
-
-
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.
-
-
-
Granite of any colour and shade
18.9
-
-
Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.
17.1
-
-
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite /stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
9
-
-
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
-
-
-
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
15.84
-
-
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).
15.84
-
-
Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured):
-
-
-
Rectangular or Sqare
30.24
-
-
Providing and fixing bright finished brass parliamentary hinges with necessary screws etc. complete :
-
-
-
150x125x27x5 mm
104
-
-
Providing and fixing bright finished brass door latch with necessary screws etc. complete :
-
-
-
300x16x5 mm
6
-
-
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
-
-
-
300x10 mm
4
-
-
250x10 mm
4
-
-
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
-
-
-
125 mm
16
-
-
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
-
-
-
Twin rubber stopper
8
-
-
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :
-
-
-
Float glass panes
-
-
-
4 mm thick glass pane (weight not less than
10 kg per sqm)
184.68
-
-
Providing and fixing fly proof stainless steel grade 304 wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete.
-
-
-
With 12 mm mild steel U beading
184.68
-
-
Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
13680.82
-
-
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
4450.66
-
-
Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and T- iron guide at the top and bottom respectively, including applying a priming coat of approved steel primer.
32.4
-
-
Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge.
-
-
-
10 x 60 mm
1588
-
-
10 x 160 mm
232
-
-
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
1437.93
-
-
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.
-
-
-
On steel work
113.4
-
-
Encasing rolled steel sections, in beams and columns, with cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size), including centering and shuttering complete but , excluding cost of reinforcement.
22.85
-
-
62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.
581.23
-
-
Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement.
-
-
-
18 mm thick
33.51
-
-
40 mm thick marble chips flooring rubbed and polished to granolithic
finish, under layer 34 mm thick cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 12.5 mm nominal size) and top
layer 6mm thick with white, black, chocolate, grey, yellow or green
marble chips of sizes from 1 mm to 4 mm nominal size, laid in cement
marble powder mix 3:1 (3 cement : 1 marble powder) by weight in
proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by
volume, including cement slurry etc. complete :
-
-
-
Medium shade pigment with 50% white cement and 50% ordinary cement
176.99
-
-
Marble chips skirting up to 30 cm height, rubbed and polished to
granolithic finish, top layer 6 mm thick with white, black, chocolate,
grey, yellow or green marble chips of sizes from smallest to 4 mm
nominal size, laid in cement marble powder mix 3:1 (3 cement : 1
marble powder) by weight in proportion of 4:7 (4 cement marble powder
mix : 7 marble chips) by volume :18 mm thick with under layer 12 mm thick in cement
plaster 1:3 (1 cement : 3 coarse sand) :
-
-
-
Medium shade pigment with 50% white cement and 50% ordinary cement
21.14
-
-
Providing and fixing glass strips in joints of terrazo/ cement concrete
floors
-
-
-
40 mm wide and 4 mm thick
449.6
-
-
Extra for pre finished nosing to treads of steps of marble stone/ granite.
218.1
-
-
Extra for marble stone/ granite flooring in treads of steps and risers using single length up to 2.00 metre.
185.81
-
-
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:
-
-
-
With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
626
-
-
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete.
34
-
-
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of:
-
-
-
Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.
-
-
-
IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.
-
-
-
IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.
-
-
-
IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).
32.4
-
-
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.
-
-
-
Size of Tile 600x600 mm
979.04
-
-
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.
-
-
-
Size of Tile 600x600 mm or300x600mm
544.28
-
-
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :
-
-
-
Flamed Finish Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
627.51
-
-
12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)
5104.84
-
-
15 mm cement plaster on rough side of single or half brick wall of mix:
-
-
-
1:6 (1 cement: 6 Find sand)
364.44
-
-
Distempering with oil bound washable distemper of approved brand
and manufacture to give an even shade :
New work (two or more coats) over and including water
thinnable priming coat with cement primer
5104.84
-
-
Finishing walls with water proofing cement paint of required shade :
-
-
-
Finishing walls with Premium Acrylic Smooth exterior paint with
Silicone additives of required shade:
-
-
-
New work (Two or more coats applied @ 1.43 ltr/10 sqm
over and including priming coat of exterior primer applied
@ 2.20 kg/10 sqm)
967.31
-
-
French spirit polishing :
-
-
-
Two or more coats on new works including a coat of wood filler
159.08
-
-
Painting with synthetic enamel paint of approved brand and
manufacture to give an even shade :Two or more coats on new work
675.9
-
-
Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
250
-
-
Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete
but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent,
clear or pigmented, textured or smooth as specified.
-
-
-
2 mm thick flat
170.13
-
-
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
210
-
-
Grading roof for water proofing treatment withCement concrete 1:2:4 (1 cement : 2 coarse sand :
4 graded stone aggregate 20mm nominal size)
37.39
-
-
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thick
623.21
-
-
Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in- charge.
3
-
-
Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-inCharge.
13
-
-
Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.
13
-
-
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid
5
-
-
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white
P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
5
-
-
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :
-
-
-
Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern
4
-
-
Range of three urinal basins with 10litre white P.V.C.
automatic flushing cistern
1
-
-
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :
-
-
-
Kitchen sink with drain board
-
-
-
(For Janitor & Oth. areas) 510x1040 mm bowl depth 200mm.
3
-
-
Providing & fixing P.V.C waste pipe for sink or wash basin including PVC waste fittings complete .
-
-
-
Flexible pipe
-
-
-
40 mm dia
26
-
-
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing
-
-
-
Rectangular shape 453x357 mm
4
-
-
Rectangular shape 1500x450 m
2
-
-
C.P brass
5
-
-
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineerin- charge.
12
-
-
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.
-
-
-
White Agaria Marble Stone
4.5
-
-
15 mm nominal bore
36
-
-
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.
-
-
-
15 mm nominal bore
10
-
-
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass
pillar taps, 32 mm C.P. brass waste of standard pattern, including
painting of fittings and brackets, cutting and making good the walls
wherever require:
-
-
-
White Vitreous China Wash basin size 630x450 mm with
a single 15 mm C.P. brass pillar tap( PUSH TYPE)
10
-
-
Providing and fixing soil, waste and vent pipes
-
-
-
100mm dia
-
-
-
Centrifugally cast (spun) iron socketed pipe as per IS 3989
81
-
-
Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes :
-
-
-
100mm dia
27
-
-
Providing and fixing M.S. holder bat clamps of approved design to sand cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10 x 10 x 10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc.
-
-
-
For 100 mm dia pipe
81
-
-
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
-
-
-
100mm
-
-
-
sand cast iron S & S as per IS: 3989
12
-
-
Providing and fixing plain bend of required degree.
-
-
-
100mm
-
-
-
sand cast iron S & S as per IS: 3989
26
-
-
Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete :
-
-
-
100 x 100 x 100 x 100mm
-
-
-
Sand cast iron S&S as per IS 3989
14
-
-
Providing and fixing double equal plain junction of required degree.
-
-
-
100 x 100 x 100 x 100mm
-
-
-
Sand cast iron S&S as per IS 3989
8
-
-
Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
-
-
-
100 x 100 x 100mm
-
-
-
Sand cast iron S&S as per IS 3989
6
-
-
Providing and fixing single equal plain junction of required degree.
-
-
-
100 x 100 x 100mm
-
-
-
Sand cast iron S&S as per IS 3989
6
-
-
Providing and fixing terminal guard :
-
-
-
100mm
-
-
-
Sand cast iron S&S as per IS 3989
6
-
-
Providing and fixing collar :
-
-
-
100mm
-
-
-
Sand cast iron S&S as per IS 3989
6
-
-
Providing lead caulked joints to sand cast iron/ centrifugallly cast (spun) iron pipes and fittings of diametre:
-
-
-
100mm
32
-
-
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :
-
-
-
100 mm inlet and 100 mm outlet
-
-
-
Sand cast iron S&S as per IS: 3989
12
-
-
Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work :
-
-
-
100 mm diameter pipe
81
-
-
Providing & fixing GI pipes complete with GI fittings and clamps, including cutting & making good the walls etc.
-
-
-
32 mm dia
28
-
-
40 mm dia
35
-
-
50 mm dia
30
-
-
Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work :
-
-
-
32mm dia nominal bore
28
-
-
40mm dia nominal bore
35
-
-
50mm dia nominal bore
30
-
-
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
8
-
-
Providing and fixing on wall face unplaqsticised- PVC rain water pipes confirming to IS: 13592 TYPE A, including jointing with seal ring confirming to IS: 5382 leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
-
-
-
110 mm diameter pipe
102
-
-
Providing and fixing on wall face unplaqsticised- PVC moulded fitting/ accessories for unplaqsticised- PVC rain water pipes confirming to IS: 13592 TYPE A,including jointing with seal ring confirming to IS: 5382 leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
-
-
-
Coupler
-
-
-
110mm
26
-
-
Pushfit Coupler
-
-
-
110mm
8
-
-
Single Tee without door
-
-
-
110x110x110mm
10
-
-
Bend 87.5 degree
-
-
-
110mm
11
-
-
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
-
-
-
110mm
34
-
-
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less thaN 440 grams.
8
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.
-
-
-
15mm nominal outer dia. Pipes.
60
-
-
20mm nominal outer dia. Pipes.
45
-
-
25mm nominal outer dia. Pipes.
30
-
-
32mm nominal outer dia. Pipes.
40
-
-
Providing & fixing brass stop cock of approved quality.
-
-
-
15 mm nominal bore
4
-
-
20 mm nominal bore
8
-
-
Providing and fixing gunmetal gate valve with CI wheel of approved quality (Screwed end)
-
-
-
25mm nominal bore
12
-
-
32mm nominal bore
4
-
-
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
2000
-
-
Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.
-
-
-
25 mm nominal bore, weighing not less than 62 gms
4
-
-
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge
-
-
-
Ordinary rock
194.12
-
-
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
98.76
-
-
Edges of slabs and breaks in floors and walls
-
-
-
Under 20 cm wide
24.36
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
86
-
-
Providing and fixing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12 mm dia. steel bar conforming to IS: 1786 having minimum cross section as 23 mm x 25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacturer's permanent identification mark to be visible even after fixing, including fixing in manholes with 30 x 20 x 15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
39
-
-
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality
-
-
-
L D- 2.5
-
-
-
Rectangular shape 600x450 mm internal dimensions
1
-
-
EHD - 35
-
-
-
Circular shape 560 mm internal dia
2
-
-
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
21.8
-
-
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
-
-
-
1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 10 mm nominal size).
8.68
-
-
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :
-
-
-
Cement mortar 1:6 (1 cement : 6 coarse sand)
17.66
-
-
12 mm cement plaster finished with a floating coat of neat cement of mix :
-
-
-
1:3 (1 cement: 3 fine sand)
38.64
-
-
Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers
-
-
-
Per bag of 50 kg cement used in the mix
7
-
-
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design :
-
-
-
With 20x20 mm square bar
4
-
-
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
-
-
Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m including getting out the excavated soil,and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed, with in a lead of 50 m:
-
-
-
All kinds of soil.
-
-
-
Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia.
100
-
-
Providing, laying and jointing glazed stone ware pipes grade `A' with stiff mixture of cement mortar in the proportion of 1:1 (1cement :1 fine sand) including testing of joints etc complete.
-
-
-
150 mm diameter
15
-
-
Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 coarse sand : 10 gradded stone aggregate 40 mm nominal size) upto haunches of S.W. Pipes including bed concrete as per standard design.
-
-
-
150 mm diameter
90
-
-
250 mm diameter
10
-
-
Providing and fixing square mouth S. W. Gully trap grade `A' complete with C.I. grating brick masonry chamber with F.P.S bricks and water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design
-
-
-
150 x 100 mm. size P type
3
-
-
Constructing brick masonry manhole in cement mortar 1 : 4 (1 cement : 4 coarse sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 grade stone aggregate 20mm nominal size); foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1cement 3 coarse sand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) finishd with a floating coat of neat cement complete as per standard design
-
-
-
Inside size 90 x 80 cm & 45 cm deep including CI cover with frame (light duty) 455 x 610mm internal dimension total wt. of cover & frame to be not less than 38 kg (wt. of cover 23 kg and wt. of frame 15 kg)
-
-
-
With F.P.S. bricks with class designation 75
3
-
-
Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) :
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
-
-
Extra for depth for manholes :
-
-
-
Size 120x90 cm
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
4
-
-
Providing and laying non-pressure NP2 Class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement :2 fine sand) including testing of joints etc complete.
-
-
-
150 mm diameter R.C.C pipes
85
-
-
250 mm diameter R.C.C pipes
10
-
-
Constructing brick masonry circular type manhole 0.91m internal dia at bottom and 0.56m dia at top in cement mortar 1 : 4 (1 cement : 4 coarse sand), inside plastering 12 mm thick with cement mortar 1:3 (1cement 3 coarse sand ) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channels in cement concrete 1:2:4 (1cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) finishd with a floating coat of neat cement complete as per standard design
-
-
-
0.91 m deep with SFRC cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to IS : 12592, total weight of cover and frame to be not less than 182 Kg fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) with F.P.S.bricks class designation 75
4
-
-
Extra for depth for circular manhole 0.91m internal dia at bottom with beyond 0.91m to 1.67m.
-
-
-
With FPS Bricks class designated 75
2
-
-
Constructing brick masonry road gully chamber 50 x 45 x 60 cm with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand) including 500 x 450mm precast RCC horizontal grating with frame complete as per standard design
-
-
-
With FPS bricks
10
-
-
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
-
-
-
Electric resistance or induction butt welded tubes
486
-
-
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement: 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge.
602.87
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
-
-
-
Cement mortar 1:4 (1 cement : 4 coarse sand)
24.55
-
-
Providing, laying and jointing glazed stoneware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement: 1 fine sand) including testing of joints etc. complete:
-
-
-
200 mm diameter
12
-
-
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting sAmples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level.
-
-
-
All types of soil.
-
-
-
300 mm dia
60
-
-
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.
-
-
-
150 mm nominal size dia
62
-
-
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
39.4
-
-
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
27.4
-
-
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge.
37.54
-
-
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
17.54
-
-
Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineerin-charge.
6
-
-
Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water sAmples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.
144
-
-
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:
-
-
-
150 mm dia
1
-
-
Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I).
-
-
-
150 mm dia
1
-
-
Tubewell & Water Supply Pumps
-
-
-
Mechanical
-
-
-
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting sAmples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level.
-
-
-
Rocky strata including Boulders
-
-
-
400 mm dia
100
-
-
Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed/ plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer -in-charge.
-
-
-
100 mm nominal size dia
110
-
-
200 mm nominal size dia
100
-
-
Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.
-
-
-
200 mm dia
1
-
-
Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I).
-
-
-
200 mm dia
1
-
-
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work
-
-
-
25mm dia nominal bore
100
-
-
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :
-
-
-
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
2
-
-
Constructing masonry chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
-
-
Painting GI pipes and fittings with two coats of anti corrosive bitumestic paint of approved quality.
-
-
-
25mm dia nominal bore
100
-
-
Providing and filling sand of grading zone V or coarser grade alround the GI pipes in external work.
-
-
-
25mm dia nominal bore
90
-
-
Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.
-
-
-
25 mm nominal bore, 152mm long, weighing not less than 440 gms
1
-
-
Supplying and stacking of good earth at site including royalty and carriage upto 5 km complete (earth measured in stacks will be reduced by 20% for payment).
98.7
-
-
Supplying and stacking at site dump manure from approved source, including carriage upto 5 km complete (manure measured in stacks will be reduced by 8% for payment) :
-
-
-
Screened through sieve of I.S. designation 4.75 mm (@ 6%)
0.38
-
-
Fine dressing of the ground
350
-
-
Spreading of sludge, dump manure and / or good earth in required thickness as per direction of Officer-in-charge (Cost of sludge, dump manure and / or good earth to be paid separately).
99.08
-
-
Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge..
99.08
-
-
Grassing with selection No.1 grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the good earth shall be paid for separately).
-
-
-
In rows 5 cm apart in both directions
350
-
-
Supplying & Stacking of Selection No.1 Grass at site fresh & free from weeds having proper roots in green including loading, unloading, carriage and all taxes paid etc.and as per direction of officer in charge.
350
-
-
Non schedule items
-
-
-
Providing and fixing Tata Steel Pravesh Door (Hardware GEZE Make)Ball bearing butt hinge of size 102x75x3mm with screws in SSS- Dead Bolt (Mortise Dead Lock with Euro profike cylinder(Green), Concealed Flush Bolt (98307009), D - Handle(D-Both Side - Dia 19mmX254mm(L)Geze)
-
-
-
D1 (Tata Steel Door swings type of any size)(Double leaf)
57.6
-
-
D2 (Tata Steel Door swings type of any size)(Single leaf)
47.48
-
-
Providing & fixing Tata Steel window/aliding window
-
-
-
Of any size 27mm Series with Toughened Glass and with mesh shutter 2.5 Track
172.08
-
-
Supplying and fixing of Glass Fiber Reinforced Concrete Panel(GRC Panel) of approved brand and specifications including cartage till site and all taxes,as per approval of E-in-Charge.
66
-
-
Providing and fixing bib cock of approved quality :
Providing and fixing brass bib cock of approved quality(Jaguar/Parryware) :15 mm nominal bore(Push type as per approval of E-in CHARGE)
14
-
-
Providing and fixing C.P. brass angle cock/ valve for basin mixer , geyser points or to other similar fittings of approved quality conforming to IS:8931(Jaguar/Parryware) :15 mm nominal bore(Push type as per approval of E-in CHARGE
46
-
-
Providing and fixing C.P. brass Pillar cock of approved quality in wash basin or other fittings as per requirement conforming to IS:8931(Parryware/Jaguar) :15 mm nominal bore(Push type as per approval of E-in CHARGE)
18
-
-
Providing and fixing cast brass Floor Clean Out plug with suitable insert keys for opening, male threaded joint with G.I. socket lead caulked to soil pipe / waste pipe of C.I. and C.I.(LA) pipe as required complete as per instruction of the Engineer in charge.
-
-
-
100mm dia
4
-
-
Providing and fixing Floor Drain as per requirement
-
-
-
100 mm x 50 mm
14
-
-
Providing and fixing Floor trap P type/ S type as per requirement complete with GI hopper etc.
-
-
-
100mm dia
8
-
-
Providing and fixing 25mm dia. G.I. air release valve, single acting including the cost of all pipes and fittings as per standard design and site conditions complete in all respects.
1
-
-
Providing, fixing, testing and commissioning of Brass Housing PRV with balanced seat, standard pattern, set point scale, high quality synthetic material valve insert, SS wire mesh, NBR diaphragm, NBR seats, pressure gauge, complete as required in water supply drop pipes.
-
-
-
25mm dia
1
-
-
Supply,Installation,Testing & Commissioning .of 2 Nos. support arms and backrest to mount at fixed height for handicap toilet as required.
1
-
-
Supply,Installation,Testing & Commissioning .of raised toilet seat with cover for handicap toilet.(Make Parryware/Jaguar or approved by Engineer in charge)
1
-
-
SITC in position of adjustable type white vitreous china wash basin for handicapped complete with tracks(IR 4360-Commander or equivalent) with C.I./M.S. brackets painted white, 32 mm C.P. brass waste, C.P. brass chain with rubber plug, 32mm dia C.P. cast brass bottle with extension piece, wall flanges and union complete including cutting and making good the walls floors wherever required.
1
-
-
Supply,Installation,Testing & Commissioning .of 35 mm dia powder coated steel grab L-SHAPED CORNER RAIL(800MM+800MM) (for handicapped toilet).
3
-
-
Providing and fixing of Health Foucet complete with all accessories including divertor, angle valve etc required for for complete successful commissioning.
1
-
-
Testing Charges as per EMP
-
-
-
Pre Construction Stage
-
-
-
Environmental Baseline Data Generation (Pre Construction Stage)
-
-
-
Ambient Air Quality Test
1
-
-
Noise Level Test
1
-
-
Drinking Water Quality Test
1
-
-
Construction Stage
-
-
-
Environmental Monitoring (Construction Stage)
-
-
-
Ambient Air Quality Test
3
-
-
Noise Level Test
3
-
-
Drinking Water Quality Test
3
-
-
Dust Suppression
-
-
-
Dust Suppression at Site ( Assumption @ 2 hours/ day or as and when required)
100
-
-
Septic Waste Cleaning
-
-
-
Approximately 3000 Litres in One Tanker (3 Tankers shall be required as per EMP)
10
-
-
Capacity Building
-
-
-
Training at Site for Implementation of EHS
1
-
-
Illuminated signages
50.7
-
-
Supply Installation, Testing & Commissioning of Horizontal Submersible Pump of capacity 2 lpm having head of 20 meter.
1
-
-
Mobilization and transportation of drilling equipment and ancillary equipment to and from site including erection and setting up the plant and dismantling after completion.
2
-
-
Providing & Fixing Steel Wire Fabric complete in all respect.
21.21
-
-
Charges for water analysis as per IS:10500 of tubewell water from approved laboratory including Phsical, Chemical and becteriological tests complete.
1
-
-
'Supply and installation of fully submersible type multi-stage tubewell pump with stainless steel body/impellers and water cooled motor suitable for 400/440 Volts, 3 phase, 50 cycles AC supply including submersible cable from pump setting level to Electrical panel (Location to be provided by client) complete in all respects. Capacity of Pump=200 lpm, Head=200 mtr.
1
-
-
Providing and fixing dust & vermin proof cubicle type motor control centre fabricated from powder coated 16 SWG MS sheet comprising of:
'Incomer:
'One incoming main isolation TP& Neutral link MCCB of 63/100 A rating
'One fully taped aluminium bus bar of 100A capacity in separate bus bar chamber.
'One square panel type Voltmeter reading 0-500 V with rotary selector switch for reading voltage between phases.
'One panel type Ampere meter with selector switch and CT
'3 phase indication lights
'Outgoing
'2 nos. DOL Starter suitable for 10.0 HP. (1 working+1 standby)
'2 nos. single phase preventors of suitable rating one for each motor
'2 nos. 32A/100A TP & Neutral link MCCB one for each motor
'1 nos. 32A/100A TP & Neutral link MCCB for air compressor.
'2 nos. rotary type auto/manual off selector switch.
'Space for 2 Nos. liquid level controller
'Appropriate etched aluminium identification plate for each starter/switch.
'Colour coded internal wiring from main to bus bar, switchgear, starters, indicating lAmps complete in all respects.
1
-
-
'Providing and fixing liquid level controller for pumps including probes, wiring, cable, conduit and making connection to pump panel complete in all respect and making system functional. One set of sensors at high level of UG water tank to cut-off pumpand One set of sensors at low level of UG water tank to auto start the pump.
1
-
-
'Providing PVC insulated, flat submersible cables 1100V grade Supply of Flat Power cable 4 core 10 sqmm. For tubewell.
206
-
-
Electrical Works
-
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
Group B
407
-
-
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface /
recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable
etc. as required.
20
-
-
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop
earthing as required.
1400
-
-
Wiring for circuit/ submain wiring alongwith earth wire with thefollowing sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit asrequired.
-
-
-
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
1375
-
-
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
1275
-
-
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
630
-
-
4 X 6 sq. mm + 2 X 6 sq. mm earth wire
510
-
-
4 X 10 sq. mm + 2 X 6 sq. mm earth wire
180
-
-
4 X 16 sq. mm + 2 X 6 sq. mm earth wire
150
-
-
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/
recessed steel/ PVC conduit as required.
-
-
-
2 x 1.5 sq. mm
1730
-
-
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.
-
-
-
4 Pair
640
-
-
Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same
in case of recessed conduit as required.
-
-
-
20 mm
800
-
-
25 mm
3936
-
-
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including
cutting the wall and making good the same in case of recessed
conduit as required.
-
-
-
20 mm
500
-
-
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
5/6 A switch
130
-
-
15/16 A switch
8
-
-
3 pin 5/6 A socket outlet
130
-
-
6 pin 15/16 A socket outlet
8
-
-
Telephone socket outlet
16
-
-
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
133
-
-
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.
-
-
-
1 or 2 Module (75mmX75mm)
16
-
-
6 Module (200mmX75mm)
55
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
4
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and
fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
56
-
-
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.
323
-
-
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, LED Fixtures, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
263
-
-
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5
sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
133
-
-
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.
-
-
-
Upto 450 mm sweep
11
-
-
Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.
11
-
-
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.
-
-
-
1 run of cable
1950
-
-
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted
including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
4 way (4 + 12), Double door
1
-
-
6 way (4 + 18), Double door
8
-
-
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of
following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
Single pole
156
-
-
Triple pole
22
-
-
Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and
commissioning etc. as required.
-
-
-
40 A
4
-
-
63 A
5
-
-
Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top
alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out
let and complete with connections, testing and commissioning
etc. as required.
21
-
-
Supplying and fixing 30 A/32A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top
alongwith 30 A/32A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out
let and complete with connections, testing and commissioning
etc. as required.
18
-
-
Supplying, fabricating and installing following size of perforated pre painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joints with connectors, suspended from the ceiling with M.S. suspenders including bolt & nuts, painting suspenders as required.
-
-
-
150 mm width X 50 mm depth X 1.6 mm thickness
200
-
-
Supplying, fabricating and installing following size of perforated pre painted M.S. cable trays bends with perforation not more than 17.5%, in convenient sections, joints with connectors, suspended from the ceiling with M.S. suspenders including bolt & nuts, painting suspenders as required.
-
-
-
150 mm width X 50 mm depth X 1.6 mm thickness
40
-
-
Supplying, fabricating and installing following size of perforated pre painted M.S. cable trays tees with perforation not more than 17.5%, in convenient sections, joints with connectors, suspended from the ceiling with M.S. suspenders including bolt & nuts, painting suspenders as required.
-
-
-
150 mm width X 50 mm depth X 1.6 mm thickness
40
-
-
Supplying, fabricating and installing following size of perforated pre painted M.S. cable trays cross members with perforation not more than 17.5%, in convenient sections, joints with connectors, suspended from the ceiling with M.S. suspenders including bolt & nuts, painting suspenders as required.
-
-
-
150 mm width X 50 mm depth X 1.6 mm thickness
40
-
-
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
14
-
-
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
3
-
-
Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)
70
-
-
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/
terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
15
-
-
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
75
-
-
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
150
-
-
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
200
-
-
Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with
85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.
2
-
-
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as
required.(For horizontal run)
350
-
-
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as
required.(For vertical run)
80
-
-
Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck
nuts and spring washers etc. complete as required.
10
-
-
Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required.
30
-
-
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing
RCC/ HUME/ METAL pipe/existing open trence/as required.
-
-
-
Above 35 sq. mm and upto 95 sq. mm
260
-
-
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size
on wall surface and overhead as required.
-
-
-
Upto 35 sq. mm (clamped with 1mm thick saddle)
50
-
-
Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm
MS flat clamp)
70
-
-
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated
and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV
-
-
-
3½ X 35 sq. mm (32mm)
8
-
-
3½ X 70 sq. mm (38mm)
2
-
-
3½ X 185 sq. mm (45mm)
2
-
-
4 X 10 sq. mm (25mm)
22
-
-
Erection of metallic/octagonal pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling
etc. as required.
-
-
-
Above 4.5 metre and upto 6.5 metre
10
-
-
Providing and making steel pole collar with cement concrete (1cement : 3 coarse sand : 6 stone aggregate 20mm) of specified size and shape including form work, plastering if required, curing etc as required. (volume of pole/ pipe not to be deducted)
3.6
-
-
Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required.
-
-
-
40 mm dia
40
-
-
Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab, including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete.
133
-
-
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc. as required.
-
-
-
100 mm dia
190
-
-
150 mm dia
70
-
-
Supplying and laying of following size DWC HDPE pipe ISI markedalong with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting,jointing etc.direct in ground (75 cm below ground level) includingexcavation and refilling the trench but excluding sand cushioning
and protective covering etc., complete as required.
-
-
-
63 mm dia (OD-63 mm & ID-51 mm nominal)
150
-
-
Supply, installation, testing and commissioning of following ennealed tinned electric grade copper conductor PVC insulated and PVC sheathed jelly filled armoured telecommunication cable as per specifications.
-
-
-
10 pair armoured riser cable of 0.60 mm dia copper conductor
100
-
-
20 pair armoured riser cable of 0.60 mm dia copper conductor
50
-
-
Supply and installation, testing and commissioning following size KRONE make telephone tag block in lockable 16 gauge sheet medium duity PVC enclosure complete as required.
-
-
-
10 pair Krone type tag block
2
-
-
20 pair Krone type tag block
1
-
-
50 pair Krone type tag block
1
-
-
Supply and fixing of 4 way VTPN DB IP 43, IK09 with metal door suitable for flush or surface mounting with provistion of 4 pole mccb incomer and all respept accessories as required.
4
-
-
Supply and fixing of 8 way VTPN DB IP 43, IK09 with metal door suitable for flush or surface mounting with provistion of 4 pole mccb incomer and all respept accessories as required.
1
-
-
Supply and fixing of 4 pole 100 amp 25 KA MCCB, Ics=Icu=100% with one side spreader links in existing VTPN DB as required.
4
-
-
Supply and fixing of 4 pole 200 amp 25 KA MCCB Ics=Icu=100% with one side spreader links in existing VTPN DB as required.
1
-
-
Supply of 20 Watt LED Linear Metal Construction commercial batten fitting with fuse protection suitable for Polycarbonate diffuser & aluminium heat sink complete suitable for both surface & suspended Mounting, complete in all respect 2000 system lumens PF0.95, THD10%, CRI80, Sheet Thickness 0.8mm, Average Life 40000hrs @L70 with fixing clamps, nut, bolts and fixing arrangement with both side of existing MS pipe (in case of hanging )complete accessories all respect and as directed by engineer in charge., Make Philips BN021C LED20S PSU CW GR S2 or eqivalent as per approved make
71
-
-
Supply of surface/Suspended commercial LED batten made of extruded aluminium housing, LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level) =100lumens/watt with Minimum system Lumens 4000 with maximum input power of 40Watt. , CCT of 6500/4000K (SDCM=5) , CRI 80, PF 0.9, an operating Voltage Range of 140 - 270 VAC.The luminaire should be flicker free. Luminaire manufacture shall provide LM79 report from NABL accredited lab & LM80 report issued by LED manufacturer with fixing clamps, nut, bolts and fixing arrangement with both side of existing MS pipe (in case of hanging )complete accessories all respect and as directed by engineer in charge.,. Similar to Philips BN100C LED40S-6500 PSU L120 GR or eqivalent as per approved make
24
-
-
Supply of surface/Suspended LED industrial batten made of CRCA housing, LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level) =120lumens/watt with Minimum system Lumens 4000 with maximum input power of 34 - 40Watt. Life of fixture (Including Driver) : 50000 burning Hrs. @ L70B50 Lumen maintenance, CCT of 6500K (SDCM=4) , CRI 80, PF 0.95 & THD10%, an operating Voltage Range of 130 - 320 VAC.Minimum Internal Surge Protection 4KV & , the fixture design should comply with EMC / EMI compliance along with BIS certification for LED Driver & Luminaire seperately. The luminaire should be flicker free (Ripple5%). Luminaire manufacture shall provide LM79 report from NABL accredited lab & LM80 report issued by LED manufacturer with fixing clamps, nut, bolts and fixing arrangement with both side of existing MS pipe (in case of hanging )complete accessories all respect and as directed by engineer in charge. Similar to Philips BN308C LED40S-6500 L120 PSU WH or eqivalent as per approved make
84
-
-
Supply of LED indoor surface downlighter suitable for general lighting. Luminaire should have polycarbonate cover with diffused optics. The luminaire should have CRI 80 and CCT of 6500K. The luminaire shall be compliant with IP20 classification.The fixture should have a minimum system efficacy of 110 lumen/Watt and a minimum system lumen output of approx 2000 lumens and maximum system wattage of 18 Watts.power factor 0.95 , THD 10%. he fixture should comply with the parameters as per IS10322. The LED driver should comply to IEC61000-3-2. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Similar to PHILIPS make SM251C LED20S- 6500 PSU WH or eqivalent as per approved make.
84
-
-
Supply of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required, in case of rode length exceed more that 30 cm then fixing clamps, nut, bolts and fixing arrangement with both side in existing steel conduit/MS pipe as directed by engineer in charge.
133
-
-
Supply of Exhaust fan 300 mm sweep metal body with 50 HZ 230 volt ac complete with all respective accessories.
11
-
-
Dismantling existing electrical accessories like switch boards, switches, ceiling fans, DB's, wiring etc. by manual means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge of complete project.
1
-
-
Supplying, installation, testing & commissioning of modular, fully bolted type, sectionallised Low Voltage Panel suitable for 415 V, 3 Phase, 4 wire 50 Hz AC supply system as per standard IEC 61439- 1 &2 as Total Type Tested Assembly and of suitable size fabricated in compartmentalized design with CRCA sheet steel of 2mm thick for load bearing member and 1.6mm for Non load bearing member. 3mm thick for gland plates. i/c cleaning & finishing complete with 9 tank process (automatic PT spray) for powder coating in approved shade, having suitable rating capacity extensible type TPN Aluminium bus bars of high conductivity as per BOQ, bus bar supports, with short circuit withstand capacity of 50kA for 1 Sec., bottom base frame of 3mm thick (multifold design), fabrication shall be done in trasportable sections, entire LENGTH panel shall have a common earth bar at the rear with 2 Nos. earth stud, solid connections from main bus bar to switch gears with required size of bus bars/Copper Cables and control wiring with 2.5 Sq.mm. PVC insulated copper FRLS conductor S/C cable for voltage & Current respectively, cable alleys, i/c providing following switch gears , Panel shall be suitable for Internal Arc Test 50kA for 400mS as per IEC61641 and Siesmic Zone-IV tested , Mechanical Impact IK08-IK10 as per IEC, ACBs shall have Temperature protection for release & having display with battery backup and 20Faults Trip History : ( The board shall be dust and vermin proof with degree of protection IP 42 )
-
-
-
INCOMER:
-
-
-
1 nos. 1000A 415V, Ics=Icu=Icw=50KA, 4P ACB with MP release with LCD display having O/L, S/C , G/F Over temperature and neutral failure protection, release should have minimum 10 Nos fault history for diagnosis of fault,
-
-
-
1 nos. Digital type multi function meters (V+A+Hz) with cast resin CTs 1000/5A.
-
-
-
1 Set of phase indicating lamp with MCB
-
-
-
1 No. 1000A, 4pole onload changeover switch.
-
-
-
BUSBAR
-
-
-
1000A TPN Bus bar of aluminimum alloy.
-
-
-
OUTGOING
-
-
-
1 nos. 250A, 415V, FP MCCB of 36kA.with adjustable O/L and S/C protection
-
-
-
4 nos. 125A, 415V, FP MCCB of 25kA.with adjustable O/L and S/C protection.
-
-
-
1 nos. 63A, 415V, FP MCCB of 25kA.with adjustable O/L and S/C protection.
-
-
-
5 nos. 40A, 415V, 4P MCB of 10kA.with O/L and S/C protection.
-
-
-
6 nos. 63A, 415V, 4P MCB of 10kA.with O/L and S/C protection.
-
-
-
4 nos. 32A, 230V, 2P MCB of 10kA.with O/L and S/C protection.
-
-
-
Incommer for APFC Section 1 nos. 400A, 415V, FP MCCB of 36kA.with adjustable O/L and S/C protection.
-
-
-
1 nos. Digital type multi function meters (V+A+Hz) with cast resin CTs 1000/5A.
-
-
-
1 Set of phase indicating lamp with MCB
-
-
-
1 No. APFC Relay suitable for controlling of 12 Nos relay output.
-
-
-
250KVAR Capacitor Bank in 12 steps having MCB/MCCB for protection, Contactors as per AC6 Duty for automatic switching, having auto manual switch and indication for each step.
1
-
-
Supply and Erecting modular type computer jack RJ 45 with screwless connector approved make with mounting plate and box with wiring connections complete.
39
-
-
Supplying & fixing of 6 Core - Optic fiber cable OM4 - Unitube Corrugated steel tape Optical Fiber Cable as per IEC 60794-1
200
-
-
Supplying & fixing of U/ UTP, Cat 6 A Cable as per ANSI/TIA 568C.2 at 500 to 600 MHz suitable for (Complete in all respect) cctv
2000
-
-
Supply and fixing of 2 Zone Conventional Fire Alarm Control Panel , Panel Operating Voltage :AC 220v 50Hz #10%, DC 24v 1 amp Operating Temperature :0º C to 50º (176)C Operating Humidity :95% (non-condensing)
Hooter output :2A (24v DC) ,EOL :4k7 ohm, 1 per Zone, Construction :1.8mm CRCA sheet duly powder Coated ,
16 * 2 character LCD Display , Extra potential free contact for fire & fault ,Auto dialer connectivity facility ,Inbuilt battery charger & battery space facility ,Reset, alarm cancel, lamp test feature,Zone wise test and isolation facility
,Protected from Hi-voltage, over-load, short-circuit, Zone wise LED indications for fire, open and short.
1
-
-
Supply and fixing of High intensity Sounder with mounting base.
6
-
-
Providing , installation , testing & commissioning of Glass Break Type Manual Call Point
6
-
-
Supply of following sizes of XLPE insulated Aluminum Armoured cable, overall PVC sheathed 1.1 KV grade cables conforming to relevant IS code and technical specifications.
-
-
-
4CX10 SQMM AL ARMOURD CABLE
196
-
-
3.5CX35 SQMM AL ARMOURD CABLE
200
-
-
3.5CX70 SQMM AL ARMOURD CABLE
50
-
-
3.5CX185 SQMM AL ARMOURD CABLE
80
-
-
Supply of LED street light fitting not more than 30W having System Efficacy 120 lm/W, system output 3600Lumens, THD 10%, Power Factor 0.95, CRI 70, CCT 5700, Full IP 66 ( with out Glue) protected single piece die cast aluminium housing having toughned glass/PC with Impact resistance IK07. LED driver should be Fully metal body Potted & Encapsulated . BIS compliant driver should sustain 440V Stress Voltage protection for 8 Hrs., High Cut off : 325V(+/- 15V) and should have feature of Auto Restart. Driver shall have 4KV Surge protection and feasibility of 10KV external SPD housed in Luminiare and confirming standard IEC60598. Including suitable size GI pipe bracket clamps, nut, bolts and washers complete all as directed. Make : PHILIPS cat. part no. BRP046 LED 36 CW MR S1 PSU GR or eqivalent as per approved make
10
-
-
Supply of 5.0 Mtr Height Galvanized Iron OctagonalPoles having uniformly tapered polygonal shape throughout the length with straightLongitudinal welding in a single shaft. There shall not be any circumferential welding. Dimensions:Top Dia.: 70mm, Bottom Dia.: 130mm, Thickness 3mm &Base plate 200*200*12 mm. Dimension of Foundation Bolts - Length 600mm, Dia. 24mm &04 Nos. Bolts manufactured from special steel along with nuts, washer, anchor plates & Templates. SingleArm of 0.5 Mtr. Shall be provided along with – MAKE PHILIPS or eqivalent as per approved make.
10
-
-
Safety Equipments & Accessories
-
-
-
Supplying & laying 1.1 kv grade ISI marked synthetic rubber mats as per specifications of chief electrical inspectorate.
8
-
-
Supplying & fixing of shock treatment chart printed in hindi and english fitted in wooden frame and glass at front side and hard board at back side.
8
-
-
Supplying & fixing in position 1.1 kv rubber hand gloves.
4
-
-
Supplying of first aid box as approved by St. John Ambulance Brigade/Indian Red Cross conforming to IS : 2217 - 1963.
6
-
-
Supplying of basic Electrical and mechanical maintenance tool kit as per direction of engineer In charge.
2
-
-
Fire Fighting
-
-
-
Supply,installation,testing and commissioning of MS C class Heavy duty pipe Inclueding forged fitting such as bends, tees, reducers,welding rods,two cote red oxide peimer and one cote post office red paint,angle,fastnor,two cote black japan etc. as follow
-
-
-
100 mm line (approx.) C Class
54
-
-
80mm line (approx.) C Class
6
-
-
25mm line (approx.) C Class
12
-
-
SITC of wrapping coating of pipe line in trenches
30
-
-
Supply,installation, testing and commissioning of single headed landing valve of 63mm dia. Made of SS hydrant valve complete with necessary fitting.
1
-
-
Supply,installation, testing and commissioning of RRL Hose pipe with 63mm dia. and 15mtr.length with SS male and female couplings.
2
-
-
Supply,installation, testing and commissioning of 63mm dia. SS short branch pipe nozzle suitable for instantaneous connection to hose coupling as required.
1
-
-
Supply,installation, testing and commissioning of MS hose box keeping two no.of RRL hose pipe and one no.of short branch pipe.
1
-
-
Supply,installation, testing and commissioning of two way fire brigade inlet connection suitable for local fire tender complete as required.
1
-
-
Supply,installation,testing and commissioning of swinging type first aid fire hose reel of 20mm internal dia and 30 mtr long with MS drum and 5mm shut of nozzle complete with fitting complete as required.
3
-
-
Supply,installation,testing and commissioning of gun matel body air release valve complete with all fitting as equired like ball vlave,holdtite,suta etc.
1
-
-
Supply,installation,testing and commissioning of Cast Iron body Butterfly Valve complte with all fitting as requied like MS flange, nut bolts,washers etc.
-
-
-
100 mm
3
-
-
Supply,installation,testing and commissioning of Cast Iron body Non return valve complte with all fitting as requied like MS flange, nut bolts,washers etc.
-
-
-
100 mm
2
-
-
Supply,installation,testing and commissioning of Pressure Gauge. (0-10kg).
1
-
-
Supply,laying,testing and commissioning of alluminium armoud cable complete with all fitting as required like lugs,glands etc.of following sizes:
-
-
-
16mm x 4core. From pump electric panel to fire pump .
40
-
-
Supply,installation,testing and commissioning of gun matel body Ball Valve.25mm dia.
5
-
-
Supply,installation,testing and commissioning of pressure switch (maximum pressure range 10kg/sq high)for hydrant stand by and jocky pumps, complete as required.
1
-
-
Supply,installation,testing and commissioning of air vashal tank complete with all fitting like air release valve,ball valve,MS Flanges,holdtite,suta etc.(200mm dia x 2000mm length).
1
-
-
Supply,installation,testing and commissioning of Terrace tank made of zinc aluminium sheet and plastic lining 10,000 Ltr
1
-
-
Connection of terrace tank with existing water supply line
1
-
-
Supplying,Installatoin,Testing,& Commissioning of Terrace pumps of 450 lpm @ 45 mtr head
1
-
-
Supply, installation, testing and commissioning of starter for terrace pumps
1
-
-
RCC Hole Cutting
3
-
-
Digging of underground line
30
-
-
Providing and fixing anti vivration mounting for pipe line
-
-
-
100 mm dia
1
-
-
FIRE EXTINGUISHERS
-
-
-
Supply and installation of ABC powder stored pressure type portable fire extinguisher ISI marked 15683- 2006 & ISO - 9001, complete as required capacity - 6 kg
9
-
-
Supply and installation of CO2 type fire extinguisher ISI marked steel body 15683- 2006 & ISO - 9001, complete as required capacity - 4.5 kg
9
-
-
Supply and installation of Mechanical Foam (AFFF) type fire extinguisher ISI marked steel body 15683- 2006 & ISO - 9001, complete as required capacity - 9 ltr
3
-
-
Supply,installation of fire Bucket as per IS spacification with stand (holding four bucket).
2
-
-
Supply, Installation, Testing and Commissioning of 3 HP Electric Driven Fire Pump suitable for auto/maual operation & consisting of following: complete in all respect like pump, motor, coupling etc.
2
-
-
Fabrication, Supplying, Installation, Testing & Commissioning of Starter for Pumps
2
-
-
SITC of Cable for pump 4cx6 mm Aluminium armoured
30
-
-
SITC of Foot Valve
2
-
-
Supply and fixing of GI line of 50 mmdia for pump room
12
-
-
Supply,installation,testing and commissioning of Cast Iron body Butterfly Valve complte with all fitting as requied like MS flange, nut bolts,washers etc.
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements