Bridge Ropeway Tunnel And Other Infrastructure Development Corporation Of Uttarakhand Limited Tender
Calculate bid estimation of Uttarakhand BRIDCUL Tender
Bridge Ropeway Tunnel And Other Infrastructure Development Corporation Of Uttarakhand Limited - BRIDCUL Tender
Electrical and Electronics
Electrical Works
Eprocure
Opening Date17 Mar 2025
Closing Date26 Mar 2025
Tender Amount₹ 3,29,24,000
Technical
Technical
Additional Eligibility
Class Of Bidder
... View More
Class "A" Electrical License
Bid Capacity
... View More
The bid capacity required can be calculated using the formula: Assessed Available Bid Capacity = (A*N*2-B) Where A= Maximum value of Electrical engineering works executed in any one year during the last five years, N= Number of years prescribed for completion of the works for which bids are invited, B=Value of existing commitments and on-going works to be completed during the next one. Additionally, the bidder should have a minimum turnover of 164.62 Lac in the last five years and should have satisfactorily completed at least one similar work worth 35% of the tender value, which is Rs. 115.23 Lac. The bidder should also have liquid assets and/or availability of credit facilities not less than 20% of the estimated cost, i.e., Rs 14.40 lac for an estimated cost of Rs 72 Lac. However, another estimated cost mentioned is Rs. 329.24 lac, for which 20% would be Rs 65.848 lac, and for the mentioned Rs 72 Lac, 20% is Rs 14.40 lac. The specific estimated cost to use for calculating 20% for liquid assets and/or credit facilities is not clear from the provided information. For the calculation of bid capacity using the provided formula, the values of A, N, and B are required, which are not explicitly provided in the given context. Thus, the exact bid capacity required cannot be directly calculated with the given information. However, one specific mention of bid capacity is 20% of the contract value. Given the inconsistencies and lack of explicit values for the formula, the answer cannot be definitively calculated. But, one of the bid capacity mentions is 20% of the contract value.
Technical Capacity
... View More
The required prior work experience for the bidder is experience in similar works, specifically electrical engineering works. The bidder should have satisfactorily completed at least one similar work worth 35% of the tender value, which is Rs. 115.23 Lac (Electrical-61.40 Lac & Fire Alarm/fire fighting work -53.83 Lac), or at least two similar works worth 25% each of the tender value, which is Rs 82.31 Lac (Electrical- 43.86 Lac & Fire Alarm/fire fighting work- 38.45 Lac), in the last five years. Alternatively, the bidder should have completed at least two similar works worth 25% each of the tender value. The bidder should also have a total turnover of Rs. 164.62 Lac in the last five years in all classes of electrical works only. The experience certificate should be from an officer of the rank not below Executive Engineer of Govt. or Semi Govt., indicating the names of the works completed, value of works, and period during which completed. The values of the experience submitted by the bidder will be indexed with an escalation factor based on the year of completion, ranging from 1.46 for 2019-2020 to 1.00 for 2023-2024. Additionally, the bidder should have experience in specific items of work worth 25% of the estimated cost of the work in a single project executed in the last five years.
Costs
EMD
₹ 6,58,000Document Cost
₹ 5,900Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_BRID3_81470_3Bid Award Id
ViewTender No
524/BRIDCUL/993/25 Dated 10.03.2025Tender Authority
Bridge Ropeway Tunnel And Other Infrastructure Development Corporation Of Uttarakhand Limited ViewPurchaser Address
-Website
http://uktenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Group - A
162
-
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
... More
Group - B
346
-
-
... More
Rewiring for light point/ fan point/ exhaust fan point/ call bell
point with 1.5 sq.mm FRLS PVC insulated copper conductor
single core cable and 1.5 sq.mm FRLS PVC insulated copper
conductor single core cable as earth wire in existing surface/
recessed steel/PVC conduit including dismantling as required.
-
-
-
... More
Group - C
233
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
-
-
-
... More
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
1319
-
-
... More
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
6053
-
-
... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
2964
-
-
... More
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
400
-
-
... More
4 x 6 sq.mm + 2 x 6 sq.mm. earth wire
10
-
-
... More
2 x 10 sq.mm + 1 x 6 sq.mm. earth wire
58.41
-
-
... More
4 x 10 sq.mm + 2 x 6 sq.mm. earth wire
617.46
-
-
... More
4 x 16 sq.mm + 2 x 6 sq.mm. earth wire
42
-
-
... More
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.
-
-
-
... More
3 x 1.5 sq. mm
85
-
-
... More
3 x 2.5 sq. mm
499
-
-
... More
3 x 4 sq. mm
175
-
-
... More
3 x 6 sq. mm
70
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 amps modular switch, connection etc. as required.
283
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
349
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).
75
-
-
... More
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.
39
-
-
... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required
366
-
-
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required
379
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required
-
-
-
... More
5/6 A switch
261
-
-
... More
3 pin 5/6 A socket outlet
261
-
-
... More
Bell Push
11
-
-
... More
Supplying and fixing call bell/ buzzer suitable for single phase,
230 V, complete as required.
11
-
-
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
... More
25mm dia PVC conduit
200
-
-
... More
32mm dia PVC conduit
200
-
-
... More
Supplying and fixing brass batten/ angle holder including connection etc. as required.
355
-
-
... More
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.
131
-
-
... More
Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.
1846
-
-
... More
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.
292
-
-
... More
Supplying and fixing extra down rod of 10 cm length G.I. pipe, 15 mm dia, heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)
366
-
-
... More
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required
-
-
-
... More
Upto 450 mm sweep
131
-
-
... More
Extra for fixing the Louvers/ shutters complete with frame for exhaust fans of all sizes.
131
-
-
... More
Supply of surface mounting 2x2 feet 24 to 30W LED Down Light, suitable for 24Hr Continuous Operation, 3000-6000 system lumens, 100lm/W, PF0.95, THD 10% at full load, CRI80, Avg Life Class 50000Hrs @L70, complete in all respect.
18
-
-
... More
Supply of LED 4ft Batten with a nominal system lumen output of 2000 lumens and a minimum system efficacy of 100 lm/W. The luminaire shall have a rated system lifetime of 25,000 burning hours at L70. The luminaire should have a color temperature of 4000K and CRI80. The luminaire shall meet IP20 rating with THD 10% and PF 0.9. The luminaire housing should made of extrusion Al with a PC diffuser. The total power consumption should not exceed 21W (including driver). Make:- Philips, Havells, Wipro or EQ.
829
-
-
... More
Supply of Surface mounting round 6 Watt 10 Watt , LED Down Lighter, suitable for 24Hr Continuous Operation, 600-1000 system lumens, 100lm/W, PF0.95, THD 10% at full load, CRI80, Avg Life Class 50000Hrs @L70, complete in all respect. Make:- Philips, Havells, Wipro or EQ.
113
-
-
... More
Supply of Surface mounting round 10 Watt 15 Watt , suitable for 24Hr Continuous Operation, 100lm/W, PF0.95, THD 10% at full load, CRI80, Avg Life Class 50000Hrs @L70, complete in all respect.
477
-
-
... More
Supplying of Bulkhead type light fitting complete with, wire guard, holder, electronic ballast 1 x 10 W lamp including connections etc. .Make:- Philips, Havells, Wipro or EQ.
35
-
-
... More
Supplying of LED mirror light luminaire with 10W watt complete with electronic ballast, lamp including connection etc. complete as required .Make:- Philips, Havells, Wipro or EQ.
6
-
-
... More
Supply of 9W to 15 W 3 Star LED Wall Light Blub complete in all respect.
355
-
-
... More
Supply and fixing of LED Street light Fitting with mandatory driver set having die cast aluminium body and lenses suitable for 40Watt. and Confirming to IP66 protection having Company LOGO Engraved complete in all respect with 4000-5000 system lumens High Power LED with lenses, 110lm/W, PF0.95, THD 10% at full load, CRI70, Avg Life Class 50000Hrs@L70.
3
-
-
... More
Supply of 30 W LED Street Light complete in all respect.
2
-
-
... More
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. 1200 mm sweep ceiling fan
366
-
-
... More
Supplying of following size exhaust fan complete with gravity louver and connection with 3 core flexible wire as required. .Make:- Bajaj, Havells or EQ.
-
-
-
... More
300mm EXHAUST FAN
131
-
-
... More
Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. Make :- L&T, Legrand, Havells or Eq.
-
-
-
... More
32 A,25KA,FP MCCB
1
-
-
... More
63 A,25KA,FP MCCB
1
-
-
... More
100 A,30KA,FPMCCB
1
-
-
... More
Supplying and fixing following way ,single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
... More
8 way, Double door
3
-
-
... More
12 way, Double Door
6
-
-
... More
16 way, Double Door
9
-
-
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
... More
4 Way Double door
10
-
-
... More
6 way Double door
27
-
-
... More
8 way Double door
4
-
-
... More
Supplying and fixing following way surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required.(Note : Vertical type MCB TP DB is normally used where 3 phase outlet are required.)
-
-
-
... More
4 way , (4+12) Double door
2
-
-
... More
8 way (4 + 24), Double door
1
-
-
... More
Supplying and fixing following rating, four pole, 415 V, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
63 amps TP MCB
1
-
-
... More
Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required
-
-
-
... More
63 amps
5
-
-
... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
Single pole
670
-
-
... More
Double pole
15
-
-
... More
Triple pole
7
-
-
... More
Triple pole and neutral
39
-
-
... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
236
-
-
... More
Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required.
5
-
-
... More
Supplying and fixing TP sheet steel enclosure on surface/ recess
along with 16/25/32 A 415 V "C" curve TP MCB complete with
connections, testing and commissioning etc. as required
2
-
-
... More
Supply installation testing and commissioning of LT panel Board for the extension of existing panel as per the following specification with proper copper earthing as recommended. The panel should be Designed as per the latest standard IEC 61439. The panel should have Bus bar clearance of 25 mm for Ph to Ph and 19 mm for Ph to neutral, Zero Stray voltage doors and panels, polyester glass support for insulation. The cable alleys should be 300 mm wide and it should be fitted with hinged door that open up to and angle of 95 Deg. The provision of cable entry should be from Bottom. The IP protection of panel should be IP-42 for external and IP2X for internal with 3B as Form of separation. The panel should be equipped with suitable size of CT and display meter for VAF measurement. The panel should be suitable for seismic zone V. Make of panel: L&T (Ti), ABB (ArtuK), Schneider (OkEN)
-
-
-
... More
LT Outgoing should be IP 54 and should have switchgears as below. Make of LV switchgear : L&T (Lauritz & Knudsen), Schneider or Siemens.
-
-
-
... More
Building LT Panel Block-1
-
-
-
... More
INCOMER:-
-
-
-
... More
1 No 250 Amp. 4P MCCB of 25KA (Ics=Icu) Breaking Capacity
-
-
-
... More
1 No 160 Amp. 4P MCCB of 25KA (Ics=Icu) Breaking Capacity
-
-
-
... More
1 No 250 Amp. 4P Contractor
-
-
-
... More
1 No 160 Amp. 4P Contractor
-
-
-
... More
1 No. Multi Function Meter.
-
-
-
... More
2 Set of phase indicating lamps with Single Pole MCB.
-
-
-
... More
2 Set of ON / OFF indicating lamps with Single Pole MCB.
-
-
-
... More
BUS Coupler:-
-
-
-
... More
1 No 200 Amp. 4P MCCB of 25KA (Ics=Icu) Breaking Capacity
-
-
-
... More
1 No 200 Amp. 4P Contractor
-
-
-
... More
BUS BARS:-
-
-
-
... More
2nos. 300 Amps. TP&N aluminium bus bars (25 KA)
-
-
-
... More
OUT GOINGS:-
-
-
-
... More
2 Nos. 160 Amps. FP MCCB
-
-
-
... More
2 Nos. 100 Amps. FP MCCB
-
-
-
... More
1 Nos. 63 Amps. FP MCCB
-
-
-
... More
6 Nos. 32 Amps. 4P MCB
-
-
-
... More
3 Nos. 32 Amps. DP MCB
-
-
-
... More
2 Nos. Space
1
-
-
... More
Floor Panel Block-1 Basement
-
-
-
... More
INCOMER:-
-
-
-
... More
1 No 160 Amp. 4P MCCB of 25KA (Ics=Icu) Breaking Capacity
-
-
-
... More
1 No. Multi Function Meter.
-
-
-
... More
1 Set of phase indicating lamps with Single Pole MCB.
-
-
-
... More
1 Set of ON / OFF indicating lamps with Single Pole MCB.
-
-
-
... More
BUS BARS:-
-
-
-
... More
200 Amps. TP&N aluminium bus bars (25 KA)
-
-
-
... More
OUT GOINGS:-
-
-
-
... More
2 Nos. 100 Amps. FP MCCB
-
-
-
... More
12 Nos. 32 Amps. 4P MCB
-
-
-
... More
2 Nos. 32 Amps. DP MCB
-
-
-
... More
2 Nos. Space & Spare
1
-
-
... More
Floor Panel Block-1 Ground Floor
-
-
-
... More
INCOMER:-
-
-
-
... More
1 No 100 Amp. 4P MCCB of 25KA (Ics=Icu) Breaking Capacity
-
-
-
... More
1 No. Multi Function Meter.
-
-
-
... More
1 Set of phase indicating lamps with Single Pole MCB.
-
-
-
... More
1 Set of ON / OFF indicating lamps with Single Pole MCB.
-
-
-
... More
BUS BARS:-
-
-
-
... More
120 Amps. TP&N aluminium bus bars (25 KA)
-
-
-
... More
OUT GOINGS:-
-
-
-
... More
8 Nos. 32 Amps. 4P MCB
-
-
-
... More
2 Nos. Space & Spare
1
-
-
... More
Floor Panel Block-1 First Floor
-
-
-
... More
INCOMER:-
-
-
-
... More
1 No 125 Amp. 4P MCCB of 25KA (Ics=Icu) Breaking Capacity
-
-
-
... More
1 No. Multi Function Meter.
-
-
-
... More
1 Set of phase indicating lamps with Single Pole MCB.
-
-
-
... More
1 Set of ON / OFF indicating lamps with Single Pole MCB.
-
-
-
... More
BUS BARS:-
-
-
-
... More
150 Amps. TP&N aluminium bus bars (25 KA)
-
-
-
... More
OUT GOINGS:-
-
-
-
... More
11 Nos. 32 Amps. 4P MCB
-
-
-
... More
2 Nos. Space & Spare
1
-
-
... More
Floor Panel Block-1 Second Floor
-
-
-
... More
INCOMER:-
-
-
-
... More
1 No 63 Amp. 4P MCCB of 25KA (Ics=Icu) Breaking Capacity
-
-
-
... More
1 No. Multi Function Meter.
-
-
-
... More
1 Set of phase indicating lamps with Single Pole MCB.
-
-
-
... More
1 Set of ON / OFF indicating lamps with Single Pole MCB.
-
-
-
... More
BUS BARS:-
-
-
-
... More
100 Amps. TP&N aluminium bus bars (25 KA)
-
-
-
... More
OUT GOINGS:-
-
-
-
... More
8 Nos. 32 Amps. 4P MCB
-
-
-
... More
2 Nos. Space & Spare
1
-
-
... More
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. Details of cost for one each
6
-
-
... More
Earthing with G.I. earth plate 600 mm x 600 mm x 6 mm thick including accessories , and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but with charcoal or coke and salt) as required.
26
-
-
... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required
2
-
-
... More
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
60
-
-
... More
Providing and fixing 25 mm x 5 mm G.I. strip on surface or in recess for connections etc. as required.
650
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.
-
-
-
... More
Up to 35 sq.mm.
410
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required
-
-
-
... More
Up to 35 sq.mm.
65
-
-
... More
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required
-
-
-
... More
Upto 35 sq. mm (clamped with 1mm thick saddle
75
-
-
... More
Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp
10
-
-
... More
Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp
10
-
-
... More
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.
-
-
-
... More
Upto 35 sq. mm (clamped with 1mm thick saddle)
40
-
-
... More
Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)
20
-
-
... More
Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)
15
-
-
... More
Supply of following siz of 1.1KV grade multicore aluminium conductor XLPE insulated and PVC shethed armoured cable as per IS 7098:1988 with up to date amendment
-
-
-
... More
3.5 x 150 sq.mm
25
-
-
... More
3.5 x 120 sq.mm
15
-
-
... More
3.5 x 95 sq.mm
15
-
-
... More
3.5 x 25 sq.mm.
80
-
-
... More
4 x 16 sq.mm
200
-
-
... More
2 x 6 sq.mm,
260
-
-
... More
Supply of following size of 1.1KV grade multicore copper conductor XLPE insulated and PVC shethed unarmoured cable as per IS 7098:1988 with up to date amendment
-
-
-
... More
3.5 x 25 sq.mm
50
-
-
... More
Supplying and making cable end terminations with brass compression gland and aluminium lugs for following size of PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.
-
-
-
... More
2 X 6 sq. mm (19mm)
16
-
-
... More
4 X 16 sq. mm (28mm)
8
-
-
... More
3½ X 25 sq. mm (28mm)
12
-
-
... More
3½ X 95 sq. mm (45mm)
4
-
-
... More
3½ X 120 sq. mm (45mm)
2
-
-
... More
3½ X 150 sq. mm (50mm)
2
-
-
... More
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required.
-
-
-
... More
100mm dia
30
-
-
... More
Supplying and laying of following size DWC HDPE pipe ISI marked
along with all accessories like socket, bend, couplers etc.
conforming to IS 14930, Part II complete with fitting and cutting,
jointing etc. in the existing trench, complete as required.
-
-
-
... More
90 mm dia (OD-90 mm & ID-76 mm nominal)
40
-
-
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
... More
100 mm wide x 50 mm depth x 1.6 mm thickness.
60
-
-
... More
150 mm wide x 50 mm depth x 1.6 mm thickness.
10
-
-
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
... More
100 mm wide x 50 mm depth x 1.6 mm thickness.
12
-
-
... More
150 mm wide x 50 mm depth x 1.6 mm thickness.
2
-
-
... More
Supplying and installing following size of perforated Hot Dipped
Galvanised Iron cable tray "Tee" (galvanisation not less than 50
microns) with perforation not more than 17.5%, in convenient
sections, joined with connectors, suspended from the ceiling
with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
... More
100 mm wide x 50 mm depth x 1.6 mm thickness.
10
-
-
... More
150 mm wide x 50 mm depth x 1.6 mm thickness.
2
-
-
... More
Supply and fixing of fire extinguishers, ABC Type 9.00 kg. capacity(ISI Marked IS : 15683 & TAC approved) complete with initial charges and wall bracket, along with supply of all materials and labour for proper completion of work.
13
-
-
... More
Supply and fixing of CO2 type fire extinguishers, 4.50 kg. capacity(ISI Marked IS : 2878 & TAC approved) complete with initial charges and wall bracket, along with supply of all materials and labour for proper completion of work.
13
-
-
... More
Fire Alarm
-
-
-
... More
Supplying, installation, testing & commissioning of intelligent
addressable thermal detector with rate of rise cum fixed
tempreature thermistor complete with base as required
6
-
-
... More
Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required.
359
-
-
... More
Supplying, installation, testing & commissioning of addressable manual call point complete as required.
14
-
-
... More
Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required.
124
-
-
... More
Supplying, installation, testing & commissioning of addressable fire control module complete as required
-
-
-
... More
Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required.
17
-
-
... More
Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications
-
-
-
... More
2 Zone panel for fire alarm system
1
-
-
... More
10 Zone panel for fire alarm system
1
-
-
... More
Supplying, installation, testing & commissioning of main control and indicating panel made out of 16 SWG MS sheet to accommodate the following items duly powder coated in approved colour with louvers for ventilation, locking arrangement, audio and visual indication for fire alarm and public address system, monitoring system including connections, interconnections etc complete as required.
-
-
-
... More
6 Zone panel for fire alarm system
-
-
-
... More
100 Watt amplifier racks suitable for operation on 230V
AC/24V DC supply conforming to IEC-268-3 complete with all
accessories as required - 2 Nos.(one to act as standby)
-
-
-
... More
Talk back master station with LED PTT (press to talk) push
button for operation on 230V AC/24 V DC supply conforming
to IEC-268 for simplex mode of operation/communication
suitable for 20 Nos.talk back unit -1 set.
-
-
-
... More
Annoucement control desk suitable for selection of different
zones selectively and ON ALL CALL switch with visual
indication etc. complete as required -1 set.
-
-
-
... More
Amplifier change over switch for inter changing amplifier -1 No.
Monitor panel for loudspeaker complete with output
selector, ON/OFF switch, fuse, visual indications etc.
complete as required- 1 No.
-
-
-
... More
Gooseneck microphone with stand and ON/OFF switch- 1 No.
Main ON/OFF switch, fuse indication lamps, DC and AC
voltmeters & ammeters, terminal blocks etc. complete as
required -1 set.
-
-
-
... More
Battery charger trickle cum boost to take complete load of
fire alarm & PA system complete with all accessories
including providing & fixing of 2 nos.12 volt, 60 AH each
sealed maintenance free batteries -1 set.
-
-
-
... More
Supplying, installation, testing & commissioning sector panel
suitable for following zones, complete with visual indications for
short circuit fault, open circuit fault, fire condition and all other
standard facilities as per IS:2189 with mimic diagram for all
area/zone covered, complete with all connections,
interconnections as required.
-
-
-
... More
4 Zone
-
-
-
... More
Supplying, installation, testing & commissioning talk back slave station in surface/recess suitable for operation on simplex mode complete with P.T.T. knob & speaker/microphone enclosed in a M.S.(16 SWG)/ ABS box with break glass in front etc. complete as required.
-
-
-
... More
Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required
3752
-
-
... More
PA SYSTEM
-
-
-
... More
SPEAKERS
-
-
-
... More
Supplying, installation, testing & commissioning of 1.5/3/6W metal box ceiling/wall speakers complete as required Approved Makes : Bosch / Honeywell /System Sensor/ Ateis
-
-
-
... More
Ceiling Mounted Speakers
55
-
-
... More
PA CONTROLLER
-
-
-
... More
Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required
1
-
-
... More
DIGITAL AMPLIFIERS
-
-
-
... More
Supplying, installation, testing & commissioning of digital audio amplifier 75 Watt, 25V rms operating at 240 Volt AC Supply complete as required.
4
-
-
... More
PAGING STATION
-
-
-
... More
Supply, Installation, Testing & Commissioning of IP based Networkable touch screen paging station for selection of zones, supervision of system status, setting of scheduled broadcasts with the following functions:
. Built-in monitoring loudspeaker
. Detachable goose-neck microphone
. LCD touchscreen display
. Audio input
Approved Makes : Actis / Honeywell / Bosch (Persadio)
-
-
-
... More
Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required.
-
-
-
... More
speaker cable Two pair, 2-core, 1.5 sqmm
825
-
-
... More
EPBAX & LAN
-
-
-
... More
Supplying, drawing, connecting and testing of 0.5 mm dia annealed copper conductor PVC insulated PVC sheathed telephone wire in existing conduit/wire way duct etc. as required of following sizes:
-
-
-
... More
2 Pair (4 core)
225
-
-
... More
Supply, Laying Connectig ad testing of multi core (10 Pair) Telwphone cable of conductor size 0.5 mm dia annealed copper conductor PVC insulated PVC sheathed jelly Filled.
Make- Delton,Finolex,Network
150.67
-
-
... More
Supply,Laying connecting and Testing of 10 Pair cross Jumper type Telephone tag block krone make in surface /recess in wall required size of M.S box with hinged lockable dully stove enamel painted Make-Krone/
3
-
-
... More
Supply,Laying connecting and Testing of 10 Pair telephone tag block krone make in surface /recess in wall.Requried size of M.S box with hinged lockable duly stove enamel painted.Make-Krone
3
-
-
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required
-
-
-
... More
1 or 2 Module (75mmX75mm)
26
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Make:- Polycab, Havells, L&T or Eq
-
-
-
... More
Telephone socket outlet
11
-
-
... More
RJ-45 Data Socket outlet
15
-
-
... More
Supply,Installation Testing and Commissionning of Hybrid Server based PaBX with 40 analog Extension ,4 digital Extension 04 CO with CLI Facilities system.Make-Karel,Alcatel/Siemens/Matrix
2
-
-
... More
Supply and Installation of CLI based push button telephone set.Make- Singhtel,Panasonic,Alcatel
9
-
-
... More
Propriatary Full duplex HF digital phoe set with 12 ouble function programmable keys,4 line display ,call waiting ,3 way confrence,call transfer,User to user signaling.Make-Karel,Alcatel,Siemens
6
-
-
... More
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.1 run of cable
459.43
-
-
... More
Supply Installation testing and commissioning of 24 port L2 Managed switch having port density 24 No.of 10/100/1000Mbps/4 1 G SFP Ports.Make- Cisco/Juniper/Extream
4
-
-
... More
SITC of UTP CAT 6 UTP Patch Cord 1 Mtr.Make- RIT/Schinder/R & M/Comrax
-
-
-
... More
SITC of UTP CAT 6 UTP Patch Cord 3 Mtr.Make- RIT/Schinder/R & M/Comrax
21
-
-
... More
Supply and Fixing of 22 U wall mounting Networking Rack.Make- Dynamic/Comrack
-
-
-
... More
Supply and Fixing of 12 U wall mounting Networking Rack.Make- Dynamic/Comrack
2
-
-
... More
Supply Punching and Fixing of 24 ports Patch Panel Make-/RIT/R & M/Comrax
4
-
-
... More
Supply,Laying of UNI Tube Single Mode 6 F Armored Fiber Optic Cable Make- Comrax/RIT/R & M
200
-
-
... More
Labour chagres for optical fiber cable splicing and jointing with Termination.
4
-
-
... More
Supply and Fixing of 24F port LIU box fully Loaded.Make-Comrax/RIT/R&M
-
-
-
... More
Supply and Fixing of 6F port LIU box fully Loaded.Make-Comrax/RIT/R&M
1
-
-
... More
Supply and Fixing of Single Mode Patch cord SC to LC 3mtr.Make- Comrax/RIT/Schinder/R & M
3
-
-
... More
Supply and Installation of Single Mode SFP Module For Switch Make- Cisco/Juniper/Extream
4
-
-
... More
Supply and Fixing of 25 mm Sizes of Medium class PVC conduit along with accessories in surface /recess including cutting the wall and making good thw same in case of recessed conduit as requried. Make-Polycab/ AKG
325
-
-
... More
Fire Fighting
-
-
-
... More
Excavating trenches of required width for pipes cables etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m ncluding getting out the excavated soil , and then returning the soil as required , in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed , within a lead of 50 m.
-
-
-
... More
Pipes, cables etc. exceeding 80 mm dia . But not exceeding 300mm dia.
33
-
-
... More
Providing and fixing in position the industrial type pressure
gauges with gun metal / brass valves complete as required
6
-
-
... More
FIRE PUMPS - ELECTRICAL
Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required :
-
-
-
... More
(a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520.
(b) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.
(c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.
(d) Suitable cement concrete foundation duly plastered with anti vibration pads.
-
-
-
... More
1620 lpm at 70 m Head
1
-
-
... More
FIRE PUMPS - DIESEL ENGINE DRIVEN
Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump) Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520.
-
-
-
... More
Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required. M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered
and with anti vibration pads.
-
-
-
... More
1620 lpm at 70 m Head
1
-
-
... More
JOCKEY PUMP:-
Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump)
-
-
-
... More
Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520.
-
-
-
... More
Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325. M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads.
-
-
-
... More
180 lpm at 70 m Head
1
-
-
... More
Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all
respects, as required: (Terrace Pump)
-
-
-
... More
(a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520
-
-
-
... More
b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325.
-
-
-
... More
(c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required.
-
-
-
... More
(d) Suitable cement concrete foundation duly plastered and with anti vibration pads.
-
-
-
... More
450 lpm at 35 m Head
1
-
-
... More
Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required :
-
-
-
... More
INCOMING
-
-
-
... More
250A, 50kA 4 Pole MCCB, Ics=100% Icu rating Digital Voltmeter 0 500V with selector switch Digital Ammeter (0-250 A) with selector swtich & CTs etc.
LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 300A
-
-
-
... More
OUTGOING
( Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps)
-
-
-
... More
Main Fire Pump
125 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 60 HP pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.
-
-
-
... More
Jockey Pump
63A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.
-
-
-
... More
DIESEL ENGINE CONTROL
Control for diesel engine comprising -
Automatic/Manual selctor switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0- 20 A DC Ammeter All standard relays and accessories for automatic operation of diesel engine
System Controller
Designing, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification
1
-
-
... More
Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. (EXTERNAL WORKS)
-
-
-
... More
150 mm dia.
500
-
-
... More
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : (PUMP ROOM WORKS)
-
-
-
... More
80 mm nominal bore
31
-
-
... More
100 mm nominal bore
76
-
-
... More
150 mm nominal bore
15
-
-
... More
200 mm dia (wall thickness 6.3 mm)
20
-
-
... More
Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required :
-
-
-
... More
Single headed Gunmetal
10
-
-
... More
Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required.
10
-
-
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :
-
-
-
... More
100 mm dia.
7
-
-
... More
200 mm dia.
2
-
-
... More
150 mm dia.
2
-
-
... More
80 mm dia.
2
-
-
... More
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :
-
-
-
... More
100 mm dia.
2
-
-
... More
200 mm dia.
1
-
-
... More
150 mm dia.
2
-
-
... More
80 mm dia.
1
-
-
... More
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :
-
-
-
... More
80 mm nominal bore
26
-
-
... More
100 mm nominal bore
173
-
-
... More
Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.
-
-
-
... More
200 mm dia.
1
-
-
... More
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :
-
-
-
... More
Single headed Gunmetal
15
-
-
... More
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.
-
-
-
... More
20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585
-
-
-
... More
20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.
-
-
-
... More
40 m
17
-
-
... More
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :
-
-
-
... More
Gun metal
50
-
-
... More
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :
-
-
-
... More
Gun metal
25
-
-
... More
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904
as required :
-
-
-
... More
2 way - 100 mm dia M.S. Pipe (Siamese Connection)
3
-
-
... More
4 way - 150 mm dia M.S. Pipe
1
-
-
... More
Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required.
5
-
-
... More
Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required :
-
-
-
... More
150mm dia
1
-
-
... More
Providing and fixing standard fire mans axe with heavy duty insulated rubber handle.
17
-
-
... More
Providing of FHC Door made of 16 gauge MS Sheet with frame of size 105x70mm complete door and frame assembly including all hardwares (Concealed Flush handle,Allen Key Lock, MS Hinges, 5mm Thick Float glass) & accesories . The door to be painted with fire resistance paint. The scope shall also include the painting of the frame with the same paint as the shutter or complete as per direction of Engineer-in-charge.
(Approx. size of door: 900mm Wide & 1500mm Height)
17
-
-
... More
Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required.
19
-
-
... More
Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.
4
-
-
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
20000
-
-
... More
Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories :
-
-
-
... More
Pendent type sprinkler
635
-
-
... More
Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required.
-
-
-
... More
Length upto 1000 mm
635
-
-
... More
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :
-
-
-
... More
150 mm nominal bore
72
-
-
... More
100 mm nominal bore
114
-
-
... More
80 mm nominal bore
192
-
-
... More
65 mm nominal bore
120
-
-
... More
50 mm nominal bore
276
-
-
... More
40 mm nominal bore
240
-
-
... More
32 mm nominal bore
240
-
-
... More
25 mm nominal bore
1506
-
-
... More
Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required.
-
-
-
... More
100mm dia
4
-
-
... More
150mm dia
3
-
-
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :
-
-
-
... More
150 mm dia.
3
-
-
... More
100 mm dia.
4
-
-
... More
50 mm dia.
7
-
-
... More
Supplying, installation, testing & commissioning of Test and Drain Valve Assembly, including accessories such as test valve, unions, sight glass & drain valve for 50mm pipes size complete as required.
7
-
-
... More
Supply and fixing of C02 type fire extinguisher 4.5 kg. capacity (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.
15
-
-
... More
Supply and fixing of fire extinguisher, ABC Type 6.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.
15
-
-
... More
Providing and fixing Fire related signages printed on photoluminescent U1000 aluminium sheet of 1.0 mm (+-10%) containing Lumigen II as base chemical, covered under UV stablized coating and of appropriate size including fixing on wall, door, ceiling etc. with proper clamps, hangers, cleats, anchor fasteners etc. complete in all respects as directed by Engineer-in-charge.
28
-
-
... More
Pressure Vessel
Providing, fixing, testing and commissioning of pressure vessel for pressurization of fire system complete with valves at outlet / drain to operate as per operating sequences including 25 mm dia drain valve, air release valve with stop cock on the top, outside with one coat of primer & two coats of synthetic enamel paint of approved shade complete as required to operate commonly main fire pump, sprinkler pump & jockey pump at drop of pressure, automatically at required pressure setting. It should be complete as per manufacturer's specifications & as directed by Engineer- in-charge.
working pressure:- 7 kg/sqcm
test pressure: 10 kg/sqcm
-
-
-
... More
(450 mm dia & 2000 mm height)
1
-
-
... More
Providing and fixing standard fire mans axe with heavy duty insulated rubber handle.
10
-
-
... More
Fabricating & Supply, installing, testing and commissioning of sheet steel clad floor mounting control panel having suitable size for control of 1 nos. booster pumps 5.5 KW/7.5HP each having suitable incoming MCCB, incoming voltmeter with selector switch and fuses. DOL Starter with hand reset overload cum single phase preventor type relay, Ammeters to read current in any one phase, alarm with reset push button which will automatically reset for the next cycle. (As per the Technical Specifications) (At Terrace floor)
1
-
-
... More
SUB HEAD-II: ELECTRICAL WORKS
-
-
-
... More
Supplying and laying control wiring with multicore copper stranded conductor of following sizes PVC insulated, PVC sheathed armoured cable between various sensors and system controller/starter etc.in pump house & out side on surface/existing cable tray complete with connections at both end with glands etc.as required
-
-
-
... More
8 x 2.5 sq.mm
10
-
-
... More
6 x 2.5 sq.mm
10
-
-
... More
4 x 2.5 sq.mm
10
-
-
... More
2 x 2.5 sq.mm
10
-
-
... More
Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.
-
-
-
... More
150 mm width x 50mm depth x 1.6 mm thickness.
16.04
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements