Bharat Heavy Electricals Limited Tender

WWDN20180464: Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) (Cement will be supplied free of cost from BHEL store.) (Sl. No. 4.1.8, P-85) – (Sl. No. 4.1.8, P-446)

WWDN20180500: Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) (Cement will be supplied free of cost from BHEL store). (Sl. No. 5.1.3, P-95) – (Sl. No. 5.1.3, P-448)

WWDN20180501: Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) (Cement will be supplied free of cost from BHEL store.) (Sl. No. 5.2.2, P-95) – (Sl. No. 5.2.2, P-448)

WWDN20180502: Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size). (Cement will be supplied free of cost from BHEL store.) (Sl. No. 5.3, P-95) – (Sl. No. 5.3, P-448)

WWDN20180508: Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete. (Sl. No. 5.9.1, P-96)

WWDN20180510: Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform (Sl. No. 5.9.3, P-96)

WWDN20180512: Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers. (Sl. No. 5.9.5, P-96)

WWDN20180513: Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts. (Sl. No. 5.9.6, P-96)

WWDN20180534: Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured). Suspended floors, roofs, landing, beams and balconies (Plan area to be measured). (Sl. No. 5.11.1, P-97)

WWDN20180552: Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. (TMT bars shall be issued free of cost at BHEL store). (Sl. No. 5.22.6, P-98) – (Sl. No. 5.22.6, P-15)

WWDN20180619: Brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in: Cement mortar 1:6 (1 cement : 6 coarse sand) (Cement shall be issued free of cost at BHEL store). (Sl. No. 6.4.2, P-108) – (Sl. No. 6.4.2, P-108)

WWDN20181008: Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 75x63x3.2 mm. (Sl. No. 9.95.7, P-159)

WWDN20181015: Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm. (Sl. No. 9.97.4, P-159)

WWDN20181021: Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 75 mm. (Sl. No. 9.100.3, P-160)

WWDN20181151: Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (Structural Steel shall be issued free of cost at BHEL store). (Sl. No. 10.1, P-183) – (Sl. No. 10.1, P-15)

WWDN20181207: Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete: 40 mm thick with 20 mm nominal size stone aggregate. (Cement will be supplied free of cost from BHEL store.) (Sl. No. 11.3.1, P-193) – (Sl. No. 11.3.1, P-456)

WWDN20181439: 12 mm cement plaster of mix: 1:6 (1 cement: 6 fine sand) (Cement shall be issued free of cost at BHEL store). (Sl. No. 13.1.2, P-228) – (Sl. No. 13.1.2, P-461).

WWDN20181441: 15 mm cement plaster on the rough side of single or half brick wall of mix: (Cement shall be issued free of cost at BHEL store). (Sl. No. 13.2.2, P-228) – (Sl. No. 13.2.2, P-461).

WWDN20181505: Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm). (Sl. No. 13.46.1, P-232)

WWDN20181530: Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work (Sl. No. 13.61.1, P-233)

WWDN20181701: Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix). (Sl. No. 15.2.1, P-258)

WWDN20181710: Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar. (Sl. No. 15.7.4, P-258)

WWDN20182890: Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion: Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15). (Sl. No. 21.1.1.1, P-381)

WWDN20182893: Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately): Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) (Sl. No. 21.1.2.1, P-381)

WWDN20182899: Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm). (Sl. No. 21.3.2, P-382)