All India Institute Of Medical Sciences Tender

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete. Size 65 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 300x10mm

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125mm

Providing and fixing aluminium hanging floor door stopper, ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper

Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineer- in-charge.

Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineerin-charge.

Providing and fixing 19mm thick BWP grade plyboard as per IS 710 of approved brand boxes, shelves, racks, almirah,cupboard and drawer etc. including necessary nails,screws etc. complete as per direction of Engineer-incharge.

Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge.

Providing and fixing 2mm thick 16 to 19mm wide PVC edge binding tape of approved quality for cupboard/wardrobe shutters including necessary synthetic resin hot pressed to edges on binding machine etc. complete as per directions of Engineer- in-charge

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.1mm thick

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red Area of slab over 0.50 sqm

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore

Providing and fixing uPVC SWR pipes conforming to IS:13592-92 Type B, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion for soil waste + vent pipe (i)single socketed pipes. 110 mm diameter as per instruction of engineer-in-charge. 15 mm nominal bore

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete Flexible pipe 32mm dia

Providing and fixing stainless steel ( Grade 304) table made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing and fixing of 2mm thick Homogeneous flexible PVC floor covering having non -directional design, with antistatic properties of size 2mtrs x 20mtrs having total weight 3250 g/m2. (No Asian manufacturing).It also should confirm to class Bfl-s1 in flammability test as per EN13501- 1, slip resistance of R9 as per EN 13893 Class DS and very low VOC emission having Euro fins certified and GBCA/NZGBC Green Star IEQ-VOC-Compliant It shouldm demonstrate from independent tests that it inhibits the growth of MRSA on the floor to prevent any kind ofinfection. It should also achieve a BRE Global Environmental A + Rating and a Green Tag LCA Rate certified with Green Rate level A- Gold Plus Warranty: 10 years. User Class: Type 1 as per EN ISO 10581,Make : Polyflor Classic Mystique PUR

Self levelling of flooring by using fibre-reinforced self-levelling compound (i.e Mapei Ultrplan 3240 or equivalent) 2mm thick (avg.) on existing concrete, screeds, stone, ceramic tiles, old and new timber floors, parquet and plywood. Levelling will be done to such extent to provide level surface and no impression of existing flooring will be seen, as per direction of Engineer-in- charge.

Supply, Installation, Testing and Commissioning of 2 TR Split AC 4 Star Inverter Type Hot & Cold with indoor unit, outdoor unit, wireless remote, 3 metre copper pipe with insulation & 3 metre suitable electrical cable for indoor to outdoor unit, drain pipe etc. as per OEM standard. AC shall have copper evaporatorcoil & copper condender coil. Make- Mitsubishi, Daikin, Hitachi or as approved by Engineer in-charge

Supply, Installation, Testing and Commissioning of 1.5 TR Split AC 4 Star Inverter Type Hot & Cold with indoor unit, outdoor unit, wireless remote, 3 metre copper pipe with insulation & 3 metre suitable electrical cable for indoor to outdoor unit, drain pipe etc. as per OEM standard. AC shall have copper evaporatorcoil & copper condender coil. Make- Mitsubishi, Daikin, Hitachi or as approved by Engineer in-charge

Supply, Installation, Testing and Commissioning of extra Copper pipe (standard quality) both suction and discharge pipes inclusive i.e. 1/2" & 1/4" copper pipes with individual nitrile rubber sleeve type 9 mm thickness insulation for discharge and suction pipes, all required accessories.

Supply, Installation, Testing and Commissioning of PVC pipe for condensate water drain line with proper clamping, with all required accessories etc. Drain line shall be not less than 1 inch dia PVC pipe and it has to be connected between Split AC indoor unit and the nearest drainage point as per the site condition

Supply, Installation, Testing and Commissioning of Electric copper wiring (2.5 mm 4 core communication cable) with all required accessories. Make: Havells, Polycab, KEI or as approved by Engineer in-charge

Supply, Installation, Testing and Commissioning of Pre-fabricated outdoor unit frame (Wall mount/floor mount) with all accessories etc. as per site condition

Supply of XLPE Armoured Cables with Copper Conductor 650/1100 V. Grade confirming to IS : 7098, 4 X 16 sq. mm

Supply , Installation, testing and commissioning of 10 KVA ( 3Ph-3Ph) Online Double Conversion UPS system with Inbuilt Isolation transformer for Thermocycler 30 Minutes power backup 12V, 26 AH -30 No's SMF Battery for 30 Min Batt Backup, Battery Rack, Interlink Cables, DC Cable connection, testing, commissioning etc.as required & as directed by Engineering Incharge. Technical Specification Output, Output Capacity (KVA) 10 KVA, Output Capacity (KW) 8 KW, Output Power Factor 0.8 Power Factor, Output Phase 3 Phase, Output Frequency (sync to mains) 50/60Hz +/- 3 Hz Load Crest Factor 3:1 Output Waveform type Sine Wave General Specifications Flexible Battery Option Yes Isolation Transformer In-Built Paralleling Options Input Specification. Input Voltage 400 Volt Input Phase 3 Phase Input frequency 50/60Hz +/- 3 Hz Input voltage range for main operations 380 - 470 Volt Batteries & Runtime Approved Battery Capacity (AH) 18 – 100 Amp. Battery DC Bus 192 VDC Maximum Charger Capacity 8 Amp. Battery Type Compatibility SMF. Battery Environmental.Operating Temperature 0 - °C 50 Nominal Voltage (V) 12 Volt, AH Capacity @ 20 Hr rate at 27° C to 1.75 VPC 26 Amp. Batteries Recharge Time upto 90% 10 Hrs. Maximum Charger Capacity 12 % Float Voltage @ 27° C 13.5 Volt Boost Voltage @ 27° C 10.5 Volt Warranty Standard Warranty 24 Month(S). Battery Rack for 30 Nos. 12V- 26 AH Batteries. Cabinet Material Mild Steel, Maximum Battery Limit 16 No. Battery Capacity (AH) 42 Amp. Interlink Connector for 10 KVA UPS - 192 V DC (Make:- Exide,Amron, Amara Raja,Penasonic) Cable Type Copper Flexible Terminal Lug Copper Lug Terminal Type Lug Size Mm Colour Capacity 10 KVA Battery DC Bus 192 VDC. (Make:- APC,Emerson, Numeric,Microtech,Fuji Electric, Uniline or similar specification in UPS Technology.)

Supply, installation, testing and commissioning of ceiling mounted down lighter LED fittings 2X2 square shape 36 W connection with existing light point/ fan point/ exhaust fan point/ call bell point with 3 x1.5 sq.mm flexible FRLS PVC insulated, copper conductor cable, body earthing and sundry materials complete with testing, commissioning etc.as required following specifications Main housing : CRCA,internal wiring : Industrial Grade Copper wire,hardware : SS / MS,Ingress protection : IP20,lumen maintenance : 50000HR@70,Operating temperature : (0-50) Deg. C,Rated voltage & frequency : 240, 50hz AC,Wattage : 36 Watt,PF : =0.95, ITHD,10%,Luminous efficacy (lm/w) : =120,CCT : 5700K, CRI : 80,operating voltage : 140V -300V,Lumen (lm) : 4000-4400,Surge Protection : =2KV,Size MM : L 595 X W 595 X H (60 to 80),Mounting :suitable for Armstrong/Grid ceiling,Driver location : External (Make:- Philips, Orient, Havells, Wipro or similar specification in Light Technology.)

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle)

Supplying and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed /XLPE copper conductor cable of 1.1 KV grade as required. 4 X 16 sq. mm

Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/recessed steel/PVC conduit including dismantling as required. Group C

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 15/16 A switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 A socket outlet

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 pin 15/16 A socket outlet

Supplying and fixing following size/ modules, GI/PVC box alongwith modular base & cover plate for modular switches in recess etc.as required. 6 Module (200mmX75mm)

Supplying & fixing suitable size GI/PVC box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar,din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 4 way (4 + 12), Double door

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar,din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 8 way (4 + 24), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts,miniature circuit breaker (MCB), having a sensitivity current 10kA C Curve in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 amps. rating, 4 pole MCB 10kA

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/submain wiring/ cable as required.