Airports Authority Of India Tender

SITC of Lift Glass as per following specifications and detail of technical sepecification- Load / Speed: 15 Persons (1020Kgs.) / 1.00 Mtr. Per Second Drive: MICRO PROCESSOR BASED VVVF - CLOSED LOOP Travel / PIT / HEADROOM : MICRO PROCESSOR BASED VVVF - CLOSED LOOP Number Of Floors: 2 (GROUND + 1 UPPER FLOORS) Floor Display Char : G,M Number Of Landing Entrances: 2 (ONE WAY OPENING) Position Of Machinery: MACHINE ROOMLESS - GEARLESS Size of Lift Well: 2300 X 1850 (MM Wide * MM Depth * MM Height * MM E-Value) Lift Car Inside Size: 1600 X 1400 X 2200 (MM Wide * MM Depth * MM Height * MM C-Value) Clear opening of Gates / Doors / Lintel: 1000 X 2100 (MM Wide * MM Height) Lintel - 2300 mm . Type or Design of Lift Car: GLASS - GLASS ON THREE SIDES & FRONT RETRUN PANEL IN SS Car Ceiling - Car Floor: SC-101 - SS HAIRLINE FINISH -25 MM RECCESS Car Fittings: LED LIGHTS & CROSS FLOW - FAN Type Of Car Front Entrance Protection: POWER OPERATED CENTRE OPENING SLIDING DOOR Land Entrance Protection (G,1 ): CENTRE OPENING SLIDING DOOR - GLASS - STANDARD Landing Door Frame (G,1 ): STAINLESS STEEL (SJEC) - HS-001 HAIRLINE ST/ST (SJEC) Type Of Control System: MICROPROCESSOR BASED SIMPLEX SELECTIVE COLLECTIVE CONTROL WITH Electric Supply: AC 400/440 VOLTS, 3 PHASE, 50 CYCLES Lift to be provided with Seismic sensor (Preferred Make- M/s Mitsubishi, M/s Johnson, M/s Kone, M/s Thyssenkrupp, M/s Otis & M/s Schildler)

All inclusive Comprehensive Maintenance of above Lift after DLP including trouble shooting, preventive maintenance and breakdown maintenance etc. as required as per good engineering practice, recommendation of the manufacturer, instructions of Engineer-in-Charge and as per terms and conditions specified.

First year after DLP