Yamuna Expressway Industrial Development Authority Tender

... More
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of etender.up.nic.in - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.

Yamuna Expressway Industrial Development Authority - YEIDA Tender

Works
Civil And Construction
Road Construction
Eprocure
Opening Date19 Feb 2025
Closing Date4 Mar 2025
Tender Amount₹ 2,19,20,490 
Notes
Download

AI Insights

Class Of Bidder
... View More
The class eligibility requirement to bid or participate in this tender is Class 'A' electrical license for contractors.
Technical Capacity
... View More
The required prior work experience for the bidder varies based on the category of work. 1. For works more than 10.00 Lacs and up to 15.00 Lacs, the tenderer should have experience of at least two jobs equal to the bid value in the last four financial years. 2. For works more than 15.00 Lacs and up to 100.00 Lacs, the tenderer should have experience of at least two jobs equal to the bid value in the last four financial years. 3. For works more than 100.00 Lacs and up to 2000.00 Lacs, the tenderer should have experience of at least two jobs equal to the bid value or one work equal to 75% of the bid value in the last four financial years. 4. For works of 2000.00 Lacs and above, the tenderer should have experience of at least three works each equal to 40% of the bid value, or two works each equal to 60% of the bid value, or one work equal to 80% of the bid value in the last four financial years. Additionally, for certain types of work, experience in similar fields is considered, such as: - Experience of similar works for building, Tube well, intake well, WTP, Bridge, SPS, STP, Hydro Abstraction Well, Ranney well & electrification. - Experience of any two activities for internal development of sectors, which involves road, drain, water supply & sewerage. - Experience of building work can also be considered for R.C.C. drain/Brick drain. - Experience of sewerage may be considered for pipe drain, and vice versa. - Experience of similar nature of work for structural glazing contractor with an electrical license of class ‘A’. The tenderer must provide evidence of satisfactory execution of works during the last four financial years in government sectors. The cumulative financial turnover and current liquid assets requirements also vary based on the bid value.

Costs

Summary

Construction Of 45mtr Wide Road In Front Of Plot No-04(m/s-dharmpal Satpal Group) In Sector -24,yea(with Five Year Maintenance Of Road ) .wc-04

Description

Unlock the Tender details for free
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Unlock the Tender details for free
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

View all details for FREE
... More
Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density). (DAR-2018/16.2/Based on UPPWD/SOR-2020)

1087.83

9

10443.17

... More
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres. (DAR-2018/16.4/Based on UPPWD/SOR-2020)

2175.66

83

181993.96

... More
Granular sub-base with close graded A, plant mix method Construction of granular sub-base by providing close graded material, mixing in mechanical mix plant at OMC, carriage of mixed material to work at motar grader on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 for grade-1 material (MORTH/(AR/YEIDA)

329.38

4158

1369809.08

... More
Wet mix macadam Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam precification including premixing the material with water OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per Technical Specification Clause 406 of MORTH/(AR/YEIDA)

344.25

4749

1635135.86

... More
Supplying and stacking at site : 90mm to 45mm Size stone Aggregate (DAR-2018/16.3.1/Based on UPPWD/SOR-2020)

92.86

2850

264711.36

... More
Supplying and stacking at site : 63mm to 45mm Size stone Aggregate (DAR-2018/16.3.2/Based on UPPWD/SOR-2020)

221.33

2904

642764.45

... More
Supplying and stacking at site : 53mm to 22.4mm Size stone Aggregate (DAR-2018/16.3.3/Based on UPPWD/SOR-2020)

63.69

2968

189031.92

... More
Laying spreading and compacting stone aggregate of specified sizes to W.B.M specification including spreading in uniform thickness,hand picking, rolling with 3 wheel-ed road /vibratory roller 8-10 tonne in stage to proper grade and camber ,applying and brooming requisite type of screening / bin-ding material to fill up interstices of coarse aggregate watering and compacting to the required density. (DAR-2018/16.4/Based on UPPWD/SOR-2020)

377.88

381

143991.17

... More
Supplying and stacking at site : Moorum (DAR-2018/16.5/Based on UPPWD/SOR-2020)

75.58

2935

221861.31

... More
Providing and Applying Primer Coat with bitumen emulsion on prepared surface of granular base including clearing of road surface and spraying primer at the rate 0.60 kg/SQM using mechanical means. (MORTH/A.R./YEIDA/Based on UPPWD/SOR-2020)

2065.5

27

57730.73

... More
Providing and applying Tack coat on prepared surface heating bitumen in boiler and spraying the bitumen of 80/100 with spray set fitted on bitumen boiler including clearing, preparing the existing road surface as per specification (MORTH/A.R./YEIDA/Based on UPPWD/SOR-2020)

-

-

-

... More
On granular base such as WBM and WMM surface with 2.50Kg of bitumen for 10Sqm

2065.5

12

25199.1

... More
Providing, laying & rolling of close graded premix surfacing material of 20mm thickness composed of 11.2mm to 0.09mm (Type-a) or 13.20mm to 0.09mm (Type-b) aggregates using penetration grade bitumen CRMB-55 to the required line grade and level to same as wearing course on a previously prepared base, including mixing in a suitable plant laying and rolling with a smooth wheeled roller 8-10 tonne capacity, and finishing to required level and grade. (MORTH/A.R./YEIDA/Based on UPPWD/SOR-2020)

-

-

-

... More
20mm compacted thickness with bitumen penetration of CRMB-55

2065.5

205

423510.12

... More
Brick edging in full brick width and half brick depth including excavation, refilling and disposal of surplus earth lead upto 50 metres. With bricks of class designation-150 (DAR-2018/16.7.1/Based on UPPWD/SOR-2020)

540

139

75573

... More
Cement concrete with 4cm gauge approved stone ballast, coarse sand & cement in the proportion of 8:4:1 including supply of all materials, labour, tools & plants etc. required for proper completion of the work. (UPPWD/SOR-2020/281

5.4

5820

31428

... More
M-150 brick work in 1:4 one cement and four course sand 2.20 F.M. mortar in foundation and plinth including supply of all material, labour, T&P etc. required for proper completion of the work. (UPPWD/SOR-2020/305(a)

6.21

4950

30739.5

... More
12mm cement plaster of mix: 1:6 (1 cement : 6 coarse sand)

27

164

4449.6

... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge)

7.65

6899

52783.47

... More
White washing with lime to give an even shade : New work (three or more coats

81

16

1296

... More
Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour ,T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in- charge and accordance with applicable specifications.

105

520

54600

... More
Part-B:- Drain Work

-

-

-

... More
Excavation of earth in ordinary soil for laying of sewers including cutting of joints, pits, trimming, dressing, levelling, including removal of surplus earth and other dismantalled materials upto distance of 50m. from centre of trenches.(YEIDA)

538.43

72

39197.7

... More
Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density). (DAR-2018/16.2/Based on UPPWD/SOR-2020)

304.01

9

2918.5

... More
Cement concrete with 4cm gauge approved stone ballast, coarse sand & cement in the proportion of 8:4:1 including supply of all materials, labour, tools & plants etc. required for proper completion of the work. (UPPWD/SOR-2020/281

45.7

5820

265974

... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights :

-

-

-

... More
Foundations, footings, bases of columns, etc. for mass concrete. (DAR-2018/5.9.1/Based on UPPWD/SOR-2020)

116

181

21071.4

... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights :

-

-

-

... More
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. (DAR-2018/5.9.2/Based on UPPWD/SOR-2020)

1312.24

335

440322.13

... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights :

-

-

-

... More
Suspended floors, roofs, landings, balconies and access platform. (DAR-2018/5.9.3/Based on UPPWD/SOR-2020)

30

386

11590.5

... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights :

-

-

-

... More
Edges of slabs and breaks in floors and walls. Above 20 cm wide (DAR-2018/5.9.16.2/Based on UPPWD/SOR-2020)

15.75

531

8364.83

... More
M-150 brick work in 1:4 one cement and four course sand 2.20 F.M. mortar in foundation and plinth including supply of all material, labour, T&P etc. required for proper completion of the work. (UPPWD/SOR-2020/305(a)

20.7

4950

102465

... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. “(Note:- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately).

-

-

-

... More
All works upto plinth level. (DAR-2018/5.33.1/Based on UPPWD/SOR-2020)

268.54

7849

2107945.01

... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

-

-

-

... More
Thermo-Mechanically Treated bars of grade Fe-500D or more./Cold twisted bars. (DAR-2018/5.22.6/Based on UPPWD/SOR-2020)

27969.55

92

2578792.51

... More
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

26.4

1347

35564.76

... More
Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer - in -charge.

3108.6

3

10724.67

... More
Five Year Maintenance of Road

1

397452

397452.68



Evaluation Notes How It Works ?

Potential Partner

Select Your Requirements

Past Bidders
This list is curated from the bidders of the similar tenders in the past

Unlock the Tender details for free
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.