Yamuna Expressway Industrial Development Authority Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Yamuna Expressway Industrial Development Authority - YEIDA Tender
Electrical and Electronics
Electrical Works
Eprocure
Opening Date13 Nov 2024
Closing Date27 Nov 2024
Tender Amount₹ 2,28,44,799
Costs
EMD
₹ 4,57,000Document Cost
₹ 4,055Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_YEIDA_973510_1Tender No
YEA/OSD(M)/2024/165 DT-7/11/2024Tender Authority
Yamuna Expressway Industrial Development Authority ViewPurchaser Address
-Website
http://etender.up.nic.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
HT RMU UNIT SECTION
-
-
-
11 kV, indoor non extensible Load Break /VCB Panel, 11kV SF6 insulated compact switchgear having metal enclosed robotically sealed / welded stainless steel tank comprising 2nos 630 Load Break Isolator and one no 200 amp VCB in SF6 enclosure with self powered numerical overcurrent, short circuit and earth fault relay for Transformer complete as per specification as required.
-
-
-
TRANSFORMER SECTION
-
-
-
250 KVA 11KV/433 volts, Delta/Star, vector group DYN11, oil cooled ONAN transformer with OFF Load Tap Changers suitable for incoming voltage variation of +5.0% to -10% in equal steps of 2.5% to give a constant secondary voltage. The transformer shall be provided with fittings, accessories, protection, first filing of oil etc. including Buchholz relay oil/winding temperature, alarm/trip protection, surge arrestor, complete as per specifications and as required. The Losses shall be as per IS 1180 Level -I as per latest Amendment complete as required.
-
-
-
LT SECTION
-
-
-
INCOMING
-
-
-
1 no. - 400 Amps 660 volt 4 pole MCCB 50kA complete with:
-
-
-
4 nos - Cast resin current transformers of 400/5 ratio Class 1.0 for metering
-
-
-
1 no. Multifuction Meter
-
-
-
1 no. - Red/Green/AMBER ON/OFF/TRIP indicating lamps
-
-
-
A Sets of Phase Indicating Lamp
-
-
-
1 no - Microprocessor based release with protection functions-overcurrent 40%-100% with time setting,selective short circuit 100%-1000% with time setting ,instantaneous short circuit 150%-1500% and earth fault releases.
-
-
-
The compact substation shall be complete with all interconnections, labels wiring, etc as required
2
1993345
3986690
SUB HEAD II- DG Set and Associates Work
-
-
-
Installation, testing & commissioning of Diesel Engine Set Silent type with 415volts at 1500 RPM,0.8 lagging power factor at 415 volts suitable for 50Hz, 3 phase system and for 0.80 load factor and consisting of following rating for site conditions, complete with base frame, lube oil system, Radiator Cooled, required batteries, electronic governor, instrumentation, day service fuel tank of 990 liters for each DG set, residential type exhaust silencers, alarms, engine mounted control panel, Resistoflex make anti vibration pads, Alternator (Stamford/AVK SEGC) direct coupled to Engine along with static excitation system and AVR panel and all required accessories complete as required and as per specifications. Power cabling, earthing, DG Panel and any other associated electrical work shall be carried out by Electrical contractor and hence is not included in the scope of this work. However the required coordination with Electrical Contractor is in the scope of work.
-
-
-
Diesel Engine
-
-
-
Diesel Engine radiator cooled electronic start of suitable BHP at 1500 RPM suitable for above output of alternator at 40 degree C, 50% RH at 1000metre MSL and confirming to BS 5514, BS 649, IS 10000, capable of taking 10% over loading for one hour after 12 hours of continuous operations. The engine will be fitted complite with all the required accessories.
-
-
-
Digital Display for the following
-
-
-
Start & Stop switch with Key
-
-
-
Water temperature indication
-
-
-
Lubrication oil pressure indication
-
-
-
Lubrication oil temperature indication
-
-
-
Battery charging indication
-
-
-
RPM indication
-
-
-
Over speed indication
-
-
-
Low lube oil trip indication
-
-
-
Ingine hours indication
-
-
-
Alternator
-
-
-
Synchronous alternator following rating suitable for 415 volts at 1500 RPM 3 phase 50 Hz, AC supply with 0.8 lagging power factor at 40 Degree C 50% RH and at 1000 meter MSL. The alternator shall be having SPDP enclosure, brushless, continuous duty, self excited and self regulated through AVR confirming to IS 4722/BS 2613 suitable for tropical conditions and with class H insulation.
-
-
-
Base Frame and Foundation
-
-
-
Both the engine and alternator shall be mounted on suitable base frame made of MS channel with necessary reinforcement which shall be installed on suitable cement concrete foundation and vibration isolation arrangements as per recommandation of manufacturer.
-
-
-
Exhaust System
-
-
-
Dry exhaust mainfold with hospital exhaust silencer
-
-
-
Fuel Tank
-
-
-
Daily service fuel tank of 990 ltr capacity fabricated out of 2mm thick MS sheet complite with all standard accessories and fuel piping between fuel tank and diesel ingine with MS class C pipes of suitable dia, complite with valves, level indications and accessories as required as per specifications.
-
-
-
Starting System
-
-
-
12V/24V DC starting system comprising of starter motors voltage regulator and arrangements for initial excitation complite with suitable nos. of batteries (25 plates, 360/180 AH capacity lead acid type) as required as per specification
-
-
-
Accoustic and weather proof enclosure with arrangements for fresh air intake for cooling of the engine and alternator, extraction, discharging hot air into the atmosphere as per specifications.
-
-
-
The D.G. sets shall be inclusive of but not limited to the following standard accessories:
-
-
-
Radiator cooled system .
-
-
-
Fly Wheel to suit flexible/rigid coupling.
-
-
-
Fly wheel housing complete with starter gear ring and coupling.
-
-
-
Fuel hoses.
-
-
-
Electronic Governor.
-
-
-
Air Cleaner with Vacuum Indicator.
-
-
-
Fuel and Lube Oil Filter.
-
-
-
By pass filter
-
-
-
Corrosion inhibitor coolant.
-
-
-
Fuel Pump PT Type.
-
-
-
Water Pump.
-
-
-
Lube Oil Pump.
-
-
-
Electric Starter 24 Volts DC.
-
-
-
Battery Charging Alternator with Built-in-regulator - 24 Volts, 30 Amps.
-
-
-
Residential Silencer including baffle plates and 75mm thick LRB rock wool (64 Kg/m3 density) insulation clad with 26 SWG aluminium sheet cladding.
-
-
-
Expansion below
-
-
-
Flue pipe of required size from DG set FLUE OUTLET upto Silencer.
-
-
-
Safety Control against low Lube oil pressure, over speed and high cooling water temperature along with tripping.
-
-
-
Lube Oil Cooler.
-
-
-
Flexible Pipe joints for Silencer.
-
-
-
Vibration Damper.
-
-
-
Anti Vibration Pads.
-
-
-
Rating of DG Sets as Follows :-
-
-
-
160 kVA Silent Type
1
1650000
1650000
DG Setrs shall be suitable for Auto ON/OFF incase of Failure and Interlocking with PLC in the Panel LT Panel
-
-
-
D.G. panel described as above, complete as required and as per specifications.
-
-
-
Supply, erection, testing and commissioning of exhaust piping Min. 5mm Thick of following sizes with welding joint including bends, MS pipe supports, clamps, dash fastener, nuts, bolts etc., with minimum 50mm thick rockwooll (150Kg/Cub Mtr.) covered with 26 SWG aluminium sheet claddings etc. complete as required and as per specifications. insluding Structure along with DG Sets
-
-
-
125 mm dia. NB
20
3500
70000
SS Bellows
2
8000
16000
MS Support structure
3000
130
390000
Control Cable :
-
-
-
Supply, laying, testing and commissioning of the following sizes of 1.1 KV grade XLPE insulated and PVC sheathed copper conductor armoured stranded control cable conforming latest IS complete as required.
-
-
-
4 Core x 2.5 Sq.mm Cable
100
348
34800
8 Core x 2.5 Sq.mm Cable
100
607
60700
Control Cables termination:
-
-
-
Supplying of all materials and making terminations of control cable terminations for control cables as per item 3.0 above complete with single brass compression glands, copper lugs etc. as required:
-
-
-
2 Core x 2.5 Sq.mm Cable
6
359
2154
4 Core x 2.5 Sq.mm Cable
6
333
1998
Supply, installation, testing and commissioning of 990 litres capacity day oil storage tank fabricated from 2 mm thick MS plates. Tank shall include 450 mm ID manhole cover, level indicator and flanged connection for inlet, outlet, overflow drain and probe provision for level controller. Tank shall be mounted on 2 m high structure support with access ladder (painted with 2 coats of red oxide primer). (Day oil Tank)
1
45000
45000
Providing & fixing M.S. class ‘C’ (heavy duty) pipe & fittings like tees, elbows, junctions, unions, bends, plugs etc. Including a coat of Synthetic enamel paint over two coats of primer complete as required.
-
-
-
25 mm dia
30
515
15450
Providing & fixing CI ball valves of the following sizes suitable for pressure of 10 kg/sqcm complete with all necessary fittings
-
-
-
25 mm dia
4
6500
26000
Providing and fixing gun metal flot valve with necessary fittings complete as required.
-
-
-
25 mm dia
2
2500
5000
Providing "No smoking and Flammable" sign boars as per requirements of Petrolium Rules as required.
1
3500
3500
Supply and installation of 4 nos. fire bucket with sand with suitable bracket complite as required.
1
9500
9500
Supply and fixing of 9 kg foam type fire extinguisher complite as required.
2
5500
11000
11 KV Switchgear Panels
-
-
-
Design, Manufacture, Supply, delivery & Coordination with Contractor for Installation , Testing and commisssioning of following panel totally enclosed with CRCA sheet steel clad floor, mounting, epoxy based powder coating vermin proof, fully interlocked horizontal isolation, and extensible, horizontal draw out, vacuum insulated, metal clad switch board having single/double isolation features complete with circuits as detailed below. The switch board would be complete with necessary insulation – silicon based Raychem or equivalent insulated copper bursars, earthing switch/Truck, Wiring, labels, cable eyes, cable termination to receive XLPE cables, foundation bolts and suitable for operation on 11 KV 3 phase, 50 cycle, earthed system with a rupturing capacity of 350 MVA at 11 KV for 3 seconds.
-
-
-
Incoming 11 KV Panel Board
-
-
-
1 – Air insulated metal clad housing
-
-
-
1 – Set of 3 phase, insulated copper bus bars 630 amps rating.
-
-
-
6 – Single pole cluster type isolating contacts i.e. plug and switches.
-
-
-
1 – Triple pole draw out trolly mounted 11 KV 350 MVA, 630 Amps Vacuum circuit breaker fitted with arc control devices.
-
-
-
1 – Trip free 240 V AC, motor charged spring release closing mechanism complete with necessary auxiliary switches, emergency hand trip device and mechanical ‘OFF’ & ‘ON’ indicators.
-
-
-
6 nos NO/NC contacts
-
-
-
1 – 24 Volt DC shunt trip coil & closing coil.
-
-
-
3 – Dual core dual ratio cast resin current transformers of ratio 250-125/5 Class 5P10 and Class 1.0, 15 VA burden for protection & metering.
-
-
-
1-3 Phase cast resin horizontal draw out bus potential transformer ratio 11 KV / √3 : 110 / √3 Volt, class 1.0, 100 VA, connected star/star with H.V and L.V. connections, H.V. fuses and LV MCB of adequate rating to withstand fault level in P.T circuit, isolating plugs for H.V. and L.V. connection.
-
-
-
1- common Hooter
-
-
-
1 – Strip heater to prevent absorption of moisture.
-
-
-
The instrument and relay panel fitted with followings
-
-
-
1 – Digital voltmeter 0 – 12 KV with 3 way and OFF selection facility.
-
-
-
1 – Digital Ammeter (0-250) amps with 3 way and OFF selection facility.
-
-
-
1 no.Multi function Meter (MFM-1) with RS 485 of 1.0 accuracy to measure voltage, current, power factor, frequency, KW , KVA, KWH, KVAh.
-
-
-
1 – no. circuit breaker control switch for electrical (T/N/C)
-
-
-
1 – Triple pole numerical I.D.M.T. over current & earth fault relay with two outer elements connected for over current protection and the middle element for earth fault protection over current setting 50% - 200% Earth fault setting 20% - 80% (51 and 51N)
-
-
-
1 – Master trip relay (86)
-
-
-
1 – Trip circuit Supervision relay.(95)
-
-
-
1 – Anti pumping relay (94)
-
-
-
1 – Over Voltage relay (59)
-
-
-
1 – Set of red / green indicating lamps for close and open position with MCB.
-
-
-
1 – Amber indicting lamp for auto trip with MCB
-
-
-
1 – Clear indicating lamp for trip circuit healthy with MCB
-
-
-
1 – Set of RYB Phase indicating lamps one per phase with MCB
-
-
-
1 - Blue indicating lamp for spring charged.with MCB
-
-
-
1 – Push button on front door for emergency trip.
-
-
-
1 – Cable end box suitable for cable termination to receive 11 KV 3 core 240 sq.mm XLPE cable.
-
-
-
11KV, 1No Incoming Panel board as described above & as per specification including Power Pack for Auxiliary Services
1
557713
557713
415 Volts Panel
-
-
-
Design, manufacture, supplying, erection, testing and commissioning of the following front operated front access 2mm thick steel enclosure free standing, outdoor type, dust and vermin proof, Panel with IP42 Protection & Feeder Pillar with IP 55 whether proof protection with hinged and lockable doors complete with interconnections, electrolytic aluminium crimping lugs, brass glands, bonding to earth and painting,, suitable for use at 415 volts, 3 phase 4 wire 50 Hertz system, and with 25 MVA rupturing capacity at 415 volts.
-
-
-
Note : The following provisions shall be required to be made in the switchboard detailed below:
-
-
-
The switchboard shall be have provision for entry of all cables / bus duct from the top / bottom as required.
-
-
-
All live accessible parts shall be shrounded and all equipment shall be finger touch proof. The busbar insulation shall be with heat shrinkable sleeves. SMC/DMC shrounds and bus bar supports shall be used.
-
-
-
Suitable tinned copper extension links for incoming / outgoing cables shall be provided wherever required.
-
-
-
Control circuits includes breaker control switch, auto manual selector switch, spring charging trip indication Timer, control wiring, Auxiliary contactors MCB' as required at site.
-
-
-
All the incomers breakers shall be interlocked to avoid parallel operation.
-
-
-
All ACB, fault level breaking capacity indicates Ics value at 415 volts. (Ics = Icu = Icw = 100%) for 1 sec.
-
-
-
MCCB's in the MAIN LT Panel shall be with inbuilt Microprocessor based overload and short circuit & Earth fault release as per BOQ .
-
-
-
Link and drops from ACB / MCCB shall be designed for full rated current of ACB / MCCB rating at same amount of current density as of main bus bar.
-
-
-
Space heater / light / air filter/exhaust fan shall be provided for each vertical compartment.
-
-
-
All CT's shall have same fault level rating as their respective circuit breaker.
-
-
-
Bus bar size/rating, type of insulator, size of insulator, support for insulator, spacing of busbar support shall be as per CPRI approved design.
-
-
-
MAIN PANEL ( IP 42 PROTECTION)
-
-
-
INCOMER -I & II (200 KVA CSS 1W/1S)
-
-
-
2 nos.- 400 amps 35 kA 415 volt 4P MCCB with 4P MCCB Contactor with Thermal Magnetic based release with protection functions-overcurrent 40%-100% with time setting,selective short circuit 60%-1000% with time setting ,instantaneous short circuit 150%-1200%
-
-
-
3 nos - Cast resin current transformers of 400/5 ratio Class 1.0 for metering
-
-
-
1 - Digital Ammeter scaled 0-400 amps with 3 way and OFF selector switch
-
-
-
1 - Voltmeter scaled 0-400 volts with 3 way and Off selector switch
-
-
-
Red/Green ON/OFF indicating lamps
-
-
-
1 set of three RYB phase indicating lamps
-
-
-
1- Amber indicating lamp for auto trip
-
-
-
1- Blue indicating lamp for spring charged
-
-
-
Motor wound Spring closing meachanism
-
-
-
1 no Reverse Power Relay (32)
-
-
-
1 no.- 400 amps 35 kA 415 volt 4P MCCB with 4P MCCB Contactor with Thermal Magnetic based release with protection functions-overcurrent 40%-100% with time setting,selective short circuit 60%-1000% with time setting ,instantaneous short circuit 150%-1200%
-
-
-
3 nos - Cast resin current transformers of 400/5 ratio Class 1.0 for metering
-
-
-
1 - Digital Ammeter scaled 0-400 amps with 3 way and OFF selector switch
-
-
-
1 - Voltmeter scaled 0-400 volts with 3 way and Off selector switch
-
-
-
Red/Green ON/OFF indicating lamps
-
-
-
1 set of three RYB phase indicating lamps
-
-
-
1- Amber indicating lamp for auto trip
-
-
-
1- Blue indicating lamp for spring charged
-
-
-
Motor wound Spring closing meachanism
-
-
-
1 no Reverse Power Relay (32)
-
-
-
BUS COUPLER
-
-
-
1 nos - 400 Amps 415 volt 50 KA 4 pole MCCB with contactor with complete with:
-
-
-
Red/Green ON/OFF indicating lamps
-
-
-
BUS BAR SECTION -I&II
-
-
-
Electrolytic high conductivity aluminium three phase and neutral busbars rated at 500 amps having a minimum current density of 1.0 amp per sq mm and suitable to with stand symmetrical fault level of 35 kA at 415 volts. The neutral busbar is to be of 50% capacity.
-
-
-
OUT GOING SECTION -I & II
-
-
-
2 nos. 250 amps 35 kA 415 volt TPN MCCB with Thermal Magnetic based release with protection functions-overcurrent 40%-100% with time setting,selective short circuit 60%-1000% with time setting ,instantaneous short circuit 150%-1200% complete with :
-
-
-
3 nos - Cast resin current transformers of 250/5 ratio Class 1.0 for metering
-
-
-
1 - Digital Ammeter scaled 0-250 amps with 3 way and OFF selector switch
-
-
-
Red/Green ON/OFF indicating lamps
-
-
-
2 nos. 160 amps 35 kA 415 volt TPN MCCB with Thermal Magnetic based release with protection functions-overcurrent 40%-100% with time setting,selective short circuit 60%-1000% with time setting ,instantaneous short circuit 150%-1200% complete with :
-
-
-
3 nos - Cast resin current transformers of 160/5 ratio Class 1.0 for metering
-
-
-
1 - Digital Ammeter scaled 0-160 amps with 3 way and OFF selector switch
-
-
-
Red/Green ON/OFF indicating lamps
-
-
-
2 nos. 63 amps 35 kA 415 volt TPN MCCB with Thermal Magnetic based release with protection functions-overcurrent 40%-100% with time setting,selective short circuit 60%-1000% with time setting ,instantaneous short circuit 150%-1200% complete with :
-
-
-
3 nos - Cast resin current transformers of 60/5 ratio Class 1.0 for metering
-
-
-
1 - Digital Ammeter scaled 0-60 amps with 3 way and OFF selector switch
-
-
-
Red/Green ON/OFF indicating lamps
-
-
-
1 no. 32 amps 35 kA 415 volt TPN MCCB with Thermal Magnetic based release with protection functions-overcurrent 40%-100% with time setting,selective short circuit 60%-1000% with time setting ,instantaneous short circuit 150%-1200% complete with :
-
-
-
3 nos - Cast resin current transformers of 32/5 ratio Class 1.0 for metering
-
-
-
1 - Digital Ammeter scaled 0-32 amps with 3 way and OFF selector switch
-
-
-
Red/Green ON/OFF indicating lamps
-
-
-
The Main Panel shall be complete with all interconnections, labels wiring, etc as required
1
775072
775072
CAPACITOR PANEL I&II (52.2 KVAR) ( IP 42 PROTECTION)
-
-
-
INCOMER
-
-
-
1 no.- 160 amps 35 kA 415 volt 4P MCCB with Thermal Magnetic based release with protection functions-overcurrent 40%-100% with time setting,selective short circuit 60%-1000% with time setting ,instantaneous short circuit 150%-1200%
-
-
-
3 nos - Cast resin current transformers of 160/5 ratio Class 1.0 for metering
-
-
-
1 - Digital Ammeter scaled 0-160 amps with 3 way and OFF selector switch
-
-
-
1 - Voltmeter scaled 0-250 volts with 3 way and Off selector switch
-
-
-
5 step automatic power factor correction relay to sense and monitor the system power factor and provide impulses for operation of 6 capacitor circuits as below.
-
-
-
1 set of three RYB phase indicating lamps
-
-
-
BUS BAR
-
-
-
Electrolytic high conductivity aluminium three phase and neutral busbars rated at 300 amps having a minimum current density of 1.0 amp per sq mm and suitable to with stand symmetrical fault level of 35 kA at 415 volts. The neutral busbar is to be of 50% capacity.
-
-
-
OUT GOINGS
-
-
-
1 nos. 63 amp TPN 35 kA MCCB with thermal over load and magnetic short circuit release and each complete with followings
-
-
-
3 pole capacitor grade contactor suitable for automatic switching of 25 kVAR capacitor bank
-
-
-
Red/Green ON/OFF indicating lamps
-
-
-
Auto/Manual Selector Switch
-
-
-
ON/OFF Push Button
-
-
-
25 kVAr hermetically sealed metallized polypropylene capacitor units complete with fuse protection, discharge resistors, interconnections etc complete as required .
-
-
-
1 nos. 32 amp TPN 35 kA MCCB with thermal over load and magnetic short circuit release and each complete with followings
-
-
-
3 pole capacitor grade contactor suitable for automatic switching of 12.5 kVAR capacitor bank
-
-
-
Red/Green ON/OFF indicating lamps
-
-
-
Auto/Manual Selector Switch
-
-
-
ON/OFF Push Button
-
-
-
12.5 kVAr hermetically sealed metallized polypropylene capacitor units complete with fuse protection, discharge resistors, interconnections etc complete as required .
-
-
-
2 nos. 32 amp TPN 35 kA MCCB with thermal over load and magnetic short circuit release and each complete with followings
-
-
-
3 pole capacitor grade contactor suitable for automatic switching of 7.5 kVAR capacitor bank
-
-
-
Red/Green ON/OFF indicating lamps
-
-
-
Auto/Manual Selector Switch
-
-
-
ON/OFF Push Button
-
-
-
7.5 kVAr hermetically sealed metallized polypropylene capacitor units complete with fuse protection, discharge resistors, interconnections etc complete as required .
-
-
-
The Capacitor Panel shall be complete with all interconnections, labels wiring, etc as required
2
142577
285154
CSF2 BUILDING PANEL ( IP 42 PROTECTION -INDOOR DUTY)
-
-
-
INCOMER
-
-
-
2 no.- 250 amps 25 kA 415 volt 4P MCCB with Thermal over load and Magnetic short circuit relase complete with
-
-
-
3 nos - Cast resin current transformers of 250/5 ratio Class 1.0 for metering
-
-
-
1 - Digital Ammeter scaled 0-250 amps with 3 way and OFF selector switch
-
-
-
1 - Voltmeter scaled 0-500 volts with 3 way and Off selector switch
-
-
-
BUS COUPLER
-
-
-
1 nos - 250 Amps 415 volt 35 KA 4 pole MCCB with complete with:
-
-
-
Red/Green ON/OFF indicating lamps
-
-
-
BUS BAR
-
-
-
Electrolytic high conductivity aluminium three phase and neutral busbars rated at 300 amps having a minimum current density of 1.0 amp per sq mm and suitable to with stand symmetrical fault level of 25 kA at 415 volts. The neutral busbar is to be of 50% capacity.
-
-
-
OUT GOINGS
-
-
-
9 nos. 63 amp 4P 10 kA MCB with thermal over load and magnetic short circuit release
-
-
-
6 nos. 40 amp 4P 10 kA MCB with thermal over load and magnetic short circuit release
-
-
-
Electrically Mechanically Interlocked Incomer, Buscoupler & Busbar
-
-
-
The Panel shall be complete with all interconnections, labels wiring, etc as required
1
191912
191912
FEEDER PILLAR (OUTDOOR TYPE)
-
-
-
Fabrication, supply, installation, testing & commissioning of outdoor type compartmentalized feeder pillar tapered (hut type) made out of 2mm thick CRCA sheet having separate cable and bus bar alley double door arrangement with two leaf door on front side and single door with double leaf on rear side with locking arrangement, having 100 amp TPN Aluminum bus bar of full length with base frame made out of 50x50x6mm thick angle iron having 150 mm legs duly erection in ground with construction of cement concrete complete with connection and interconnection with copper conductor PVC insulated cables / insulated copper conductor strip of appropriate size and terminals blocks (on outgoing) including supplying and fixing following switch gears & accessories there in powder coating, labeling, earthing etc. complete as required
-
-
-
INCOMER
-
-
-
1 no. 63 Amps 10 kA 4 MCB with thermal over load and magnetic short circuit releaes
-
-
-
BUS BAR
-
-
-
Electrolytic high conductivity aluminium three phase and neutral busbars rated at 100 amps having a maximum current density of 1 amp per sq mm suitable to with stand symmetrical fault level of 10 KA at 415 volts. The neutral busbar is to be of 100% capacity.
-
-
-
INDICATING PANEL
-
-
-
The incomers shall have the following indicating panel
-
-
-
3 nos Cast resin current transformers of 63/5 ratio Class 1.0 for metering
-
-
-
1 no ammeter of 96 mm sq scaled 0-63 amps with 3 way and OFF selector switch
-
-
-
1 no voltmeter of 96 mm sq scaled 0- 500 volts with 3 way & OFF selector switch
-
-
-
1 set of indicating lamps (ON. OFF)
-
-
-
1 set of phase indicating lamps
-
-
-
OUT GOINGS
-
-
-
1 nos. 32 Amps 230 volt 10 kA 4P MCB with thermal magnetic protective releases.
-
-
-
3 nos. 32 Amps 230 volt 10 kA DP MCB with thermal magnetic protective releases.
-
-
-
1 nos 40 amp 10 kA 4P MCB with thermal magnetic protective releases with 40 amp TP Contactor with Dual setting 24 hour calibrated time switch for automatic operation of the supply, and 12 nos 6/10/16 amp SP 10 kA MCB's as outgoing.
-
-
-
The Feeder Pillar shall be complete with all interconnections, busbars etc. complete as per design to be approved by the Architects.
1
77401
77401
Cable & Termination
-
-
-
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. UPPWD-501
-
-
-
3.5 core 240 sq mm
70
1379
96530
3.5 core 185 sq mm
70
1140
79800
3.5 core 150 sq mm
120
957
114840
3.5 core 120 sq mm
100
824
82400
3.5 core 50 sq mm
50
492
24600
4 core 16 sq mm
250
343
85750
4 core 10 sq mm
120
327
39240
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. Based on DSR-9.1
-
-
-
3.5 core 240 sq mm. Based on DSR-9.1.29
32
795
25462.4
3.5 core 120 sq mm. Based on DSR-9.1.25
32
499
15996.8
3.5 core 70 sq mm . Based on DSR-9.1.23
32
441
14112
3.5 core 50 sq mm. Based on DSR-9.1.22
36
392
14133.6
3.5 core 35 sq mm. Based on DSR-9.1.21
24
353
8484
4 core 25 sq mm. Based on DSR-9.1.34
16
335
5366.4
4 core 16 sq mm . Based on DSR-9.1.33
48
331
15907.2
4 core 10 sq mm. Based on DSR-9.1.32
38
297
11316.4
4 core 6 sq mm. Based on DSR-9.1.31
12
297
3573.6
S/L of 90mm dia. DWC pipe for drawing of power cable across the road by drilling of 120mm dia. at 1mtr. Work should be done by manual Trenchless method. Complete in all respect per direction of Engineer-in-charge YEIDA SOR-12
50
637
31850
S/L of 120mm dia. DWC pipe for drawing of power cable across the road by drilling of 150mm dia. at 1mtr. Below the road level the work should be done by manual Trenchless method. Complete in all respect per direction of Engineer-in-charge YEIDA SOR-13
50
697
34850
S/L of 160mm dia. DWC pipe for drawing of power cable across the road by drilling of 190mm dia. at 1mtr. Below the road level the work should be done by manual Trenchless method. Complete in all respect per direction of Engineer-in-charge YEIDA SOR-14
100
740
74000
S/L of 200mm dia. DWC pipe for drawing of power cable across the road by driling of 230mm dia. at 1mtr. Below the road level the work should be done by manual Trenchless method. Complete in all respect per direction of Engineer-in-charge YEIDA SOR-15
100
796
79600
Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. Based on DSR-14.1.
-
-
-
100 mm width X 50 mm depth X 1.6 mm thickness. Based on DSR-4.1.1
400
650
260000
150 mm width X 50 mm depth X 1.6 mm thickness. Based on DSR-4.1.2
100
758
75840
200 mm width X 50 mm depth X 1.6 mm thickness. Based on DSR-4.1.3
50
933
46665
300 mm width X 50 mm depth X 1.6 mm thickness. Based on DSR-4.1.4
20
1102
22054
450 mm width X 50 mm depth X 2.0 mm thickness. Based on DSR-4.1.5
30
1725
51750
Providing, laying and fixing following dia RCC pipe NP2 class (light duly)in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement: 2 fine sand) including trenching (75 cm deep) and refilling etc as required. Based on DSR-14.14.
-
-
-
100 MM DIA. Based on DSR-14.14.1
100
443
44350
150 MM DIA. Based on DSR-14.14.2
100
456
45630
250 MM DIA. Based on DSR-14.14.3
400
634
253600
300 MM DIA. Based on DSR-14.14.4
10
705
7057
Earthing
-
-
-
Supply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing. UPPWD-701
2
4076
8152
Supply and burying of G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. UPPWD-703
10
5380
53800
Supply and burying of copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. UPPWD-705
8
10450
83600
Supply and laying of 32mm x 6mm copper strip from earth electrode directly in the ground as required complete in all respect. UPPWD-718
200
1110
222000
Supply and laying of 32 mm x 6 mm G.I. strip from earth electrode directly in the ground as required complete in all respect. UPPWD-717
250
150
37500
Supply and laying of 25mm x 5mm G.I. strip from earth electrode directly in the ground as required complete in all respect. UPPWD-716
100
90
9000
Supply and fixing of one number 8 SWG G.I. wire in 15mm dia. G.I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site. UPPWD-721
400
200
80000
Lightning Conductor
-
-
-
Providing and fixing of lightning conductor finial, made of 25 mm dia 300mm long, G.I. tube, having single prong at top, with 85mm dia 6mm thick G.I. base plate i ncluding holes etc. complete as required. Based on DSR-6.2
5
235
1175
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run). Based on DSR-6.7
120
522
62724
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run) . Based on DSR-6.8
40
522
20908
Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required. Based on DSR-6.12
5
556
2783
Earthing with G.I earth Plate 600 x 600 x 6 mm thick including accessories and providing mansory enlsoure with cover plate having locking arrangment and watering pipe of 2.7 metre long, with charcoal /coke and salt as required. Based on DSR-5.2
5
4141
20707
Jointing copper /G.I. tape (with another copper/ GI tape, base of the finial or any other metallie object) by riveting /nut bolting/sweating and soldering etc as required. Based on DSR-6.4
2
47
94.2
Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required. Based on DSR-6.14
60
378
22698
External Lighting & Poles
-
-
-
Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect. UPPWD-641
13
16500
214500
Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130 mm and base plate 12mm thik) having 3mm thikness with Double arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect. UPPWD-642
3
17100
51300
Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 Watt. Confirming to IP 66 protection complete in all respect. UPPWD-1421 CAT- AAA
19
4940
93860
Supply and fixing of decorative 8 to 16 Watt LED bollard luminaire with driver set confirming to IP 65 protection complete in all respect. UPPWD-1442 CAT- AAA
18
4070
73260
Supply & Fixing of XLPE insulated, Copper un-armoured Control cable 1100V grade etc. (A) 3 x 4 sq. mm. Based on DSR - 9.1.7
400
277
110840
Supply & Fixing of XLPE insulated Aluminium un-armoured Cable. (A) 3 x 6 sq. mm. UPPWD-501
200
284
56800
UPS SYSTEM
-
-
-
Supply ,installation, testing and commissioning of IGBT Rectifier & Inverter based UPS system comprising of 1 no 15 kVA units with battery bank backup of 30 minutes duration for full load with all standards fittings, accessories, protection, instruments, indications and controls including but not restricted to transformer, rectifire, inverter, SMF battery with float cum boost battery charger, static bypass switch, maintenance bypass, output isolation transformer, interconnections etc.including warranty and free all inclusive comprehensive maintenance services for two years for UPS and battery bank after the date of handing over complete as per specification and as required.
1
545201
545201
For CSF-04 (Electronic Assembly Facility)
-
-
-
250kVA Compact Sub-Station
-
-
-
Supply, Installation, testing, commissioning and transportation at site of Outdoor Package type substation comprising of distribution transformer, RMU, LT switchgear with internal lighting, earthing, padlocking etc. without oil pits. The enclosure shall have modular construction using GI sheets and shall be painted with polyurethane paint from exterior. Connection between RMU and Transformer shall be by Aluminium XLPE HT Cable including the cable termination/alluminium bus bar and from transformer to LT ACB shall be by alluminium bus bar. Two nos. copper & two nos GI links to be provided for neutral & body earthing.The substation shall have following equipments.
-
-
-
HT RMU UNIT SECTION
-
-
-
11 kV, indoor non extensible Load Break /VCB Panel, 11kV SF6 insulated compact switchgear having metal enclosed robotically sealed / welded stainless steel tank comprising 2nos 630 Load Break Isolator and one no 200 amp VCB in SF6 enclosure with self powered numerical overcurrent, short circuit and earth fault relay for Transformer complete as per specification as required.
-
-
-
TRANSFORMER SECTION
-
-
-
250 KVA 11KV/433 volts, Delta/Star, vector group DYN11, oil cooled ONAN transformer with OFF Load Tap Changers suitable for incoming voltage variation of +5.0% to -10% in equal steps of 2.5% to give a constant secondary voltage. The transformer shall be provided with fittings, accessories, protection, first filing of oil etc. including Buchholz relay oil/winding temperature, alarm/trip protection, surge arrestor, complete as per specifications and as required. The Losses shall be as per IS 1180 Level -I as per latest Amendment complete as required.
-
-
-
LT SECTION
-
-
-
INCOMING
-
-
-
1 no. - 400 Amps 660 volt 4 pole MCCB 50kA complete with:
-
-
-
4 nos - Cast resin current transformers of 400/5 ratio Class 1.0 for metering
-
-
-
1 no. Multifuction Meter
-
-
-
1 no. - Red/Green/AMBER ON/OFF/TRIP indicating lamps
-
-
-
A Sets of Phase Indicating Lamp
-
-
-
1 no - Microprocessor based release with protection functions-overcurrent 40%-100% with time setting,selective short circuit 100%-1000% with time setting ,instantaneous short circuit 150%-1500% and earth fault releases.
-
-
-
The compact substation shall be complete with all interconnections, labels wiring, etc as required
2
1993345
3986690
DG Set and Associates Work
-
-
-
Installation, testing & commissioning of Diesel Engine Set Silent type with 415volts at 1500 RPM,0.8 lagging power factor at 415 volts suitable for 50Hz, 3 phase system and for 0.80 load factor and consisting of following rating for site conditions, complete with base frame, lube oil system, Radiator Cooled, required batteries, electronic governor, instrumentation, day service fuel tank of 990 liters for each DG set, residential type exhaust silencers, alarms, engine mounted control panel, Resistoflex make anti vibration pads, Alternator (Stamford/AVK SEGC) direct coupled to Engine along with static excitation system and AVR panel and all required accessories complete as required and as per specifications. Power cabling, earthing, DG Panel and any other associated electrical work shall be carried out by Electrical contractor and hence is not included in the scope of this work. However the required coordination with Electrical Contractor is in the scope of work.
-
-
-
Diesel Engine
-
-
-
Diesel Engine radiator cooled electronic start of suitable BHP at 1500 RPM suitable for above output of alternator at 40 degree C, 50% RH at 1000metre MSL and confirming to BS 5514, BS 649, IS 10000, capable of taking 10% over loading for one hour after 12 hours of continuous operations. The engine will be fitted complite with all the required accessories.
-
-
-
Digital Display for the following
-
-
-
Start & Stop switch with Key
-
-
-
Water temperature indication
-
-
-
Lubrication oil pressure indication
-
-
-
Lubrication oil temperature indication
-
-
-
Battery charging indication
-
-
-
RPM indication
-
-
-
Over speed indication
-
-
-
Low lube oil trip indication
-
-
-
Ingine hours indication
-
-
-
Alternator
-
-
-
Synchronous alternator following rating suitable for 415 volts at 1500 RPM 3 phase 50 Hz, AC supply with 0.8 lagging power factor at 40 Degree C 50% RH and at 1000 meter MSL. The alternator shall be having SPDP enclosure, brushless, continuous duty, self excited and self regulated through AVR confirming to IS 4722/BS 2613 suitable for tropical conditions and with class H insulation.
-
-
-
Base Frame and Foundation
-
-
-
Both the engine and alternator shall be mounted on suitable base frame made of MS channel with necessary reinforcement which shall be installed on suitable cement concrete foundation and vibration isolation arrangements as per recommandation of manufacturer.
-
-
-
Exhaust System
-
-
-
Dry exhaust mainfold with hospital exhaust silencer
-
-
-
Fuel Tank
-
-
-
Daily service fuel tank of 990 ltr capacity fabricated out of 2mm thick MS sheet complite with all standard accessories and fuel piping between fuel tank and diesel ingine with MS class C pipes of suitable dia, complite with valves, level indications and accessories as required as per specifications.
-
-
-
Starting System
-
-
-
12V/24V DC starting system comprising of starter motors voltage regulator and arrangements for initial excitation complite with suitable nos. of batteries (25 plates, 360/180 AH capacity lead acid type) as required as per specification
-
-
-
Accoustic and weather proof enclosure with arrangements for fresh air intake for cooling of the engine and alternator, extraction, discharging hot air into the atmosphere as per specifications.
-
-
-
The D.G. sets shall be inclusive of but not limited to the following standard accessories:
-
-
-
Radiator cooled system .
-
-
-
Fly Wheel to suit flexible/rigid coupling.
-
-
-
Fly wheel housing complete with starter gear ring and coupling.
-
-
-
Fuel hoses.
-
-
-
Electronic Governor.
-
-
-
Air Cleaner with Vacuum Indicator.
-
-
-
Fuel and Lube Oil Filter.
-
-
-
By pass filter
-
-
-
Corrosion inhibitor coolant.
-
-
-
Fuel Pump PT Type.
-
-
-
Water Pump.
-
-
-
Lube Oil Pump.
-
-
-
Electric Starter 24 Volts DC.
-
-
-
Battery Charging Alternator with Built-in-regulator - 24 Volts, 30 Amps.
-
-
-
Residential Silencer including baffle plates and 75mm thick LRB rock wool (64 Kg/m3 density) insulation clad with 26 SWG aluminium sheet cladding.
-
-
-
Expansion below
-
-
-
Flue pipe of required size from DG set FLUE OUTLET upto Silencer.
-
-
-
Safety Control against low Lube oil pressure, over speed and high cooling water temperature along with tripping.
-
-
-
Lube Oil Cooler.
-
-
-
Flexible Pipe joints for Silencer.
-
-
-
Vibration Damper.
-
-
-
Anti Vibration Pads.
-
-
-
Rating of DG Sets as Follows :-
-
-
-
160 kVA Silent Type
1
1650000
1650000
DG Setrs shall be suitable for Auto ON/OFF incase of Failure and Interlocking with PLC in the Panel LT Panel
-
-
-
D.G. panel described as above, complete as required and as per specifications.
-
-
-
Supply, erection, testing and commissioning of exhaust piping Min. 5mm Thick of following sizes with welding joint including bends, MS pipe supports, clamps, dash fastener, nuts, bolts etc., with minimum 50mm thick rockwooll (150Kg/Cub Mtr.) covered with 26 SWG aluminium sheet claddings etc. complete as required and as per specifications. insluding Structure along with DG Sets
-
-
-
125 mm dia. NB
20
3500
70000
SS Bellows
2
8000
16000
MS Support structure
3000
130
390000
Control Cable :
-
-
-
Supply, laying, testing and commissioning of the following sizes of 1.1 KV grade XLPE insulated and PVC sheathed copper conductor armoured stranded control cable conforming latest IS complete as required.
-
-
-
4 Core x 2.5 Sq.mm Cable
100
348
34800
8 Core x 2.5 Sq.mm Cable
100
607
60700
Control Cables termination:
-
-
-
Supplying of all materials and making terminations of control cable terminations for control cables as per item 3.0 above complete with single brass compression glands, copper lugs etc. as required:
-
-
-
2 Core x 2.5 Sq.mm Cable
6
359
2154
4 Core x 2.5 Sq.mm Cable
6
333
1998
Supply, installation, testing and commissioning of 990 litres capacity day oil storage tank fabricated from 2 mm thick MS plates. Tank shall include 450 mm ID manhole cover, level indicator and flanged connection for inlet, outlet, overflow drain and probe provision for level controller. Tank shall be mounted on 2 m high structure support with access ladder (painted with 2 coats of red oxide primer). (Day oil Tank)
1
45000
45000
Providing & fixing M.S. class ‘C’ (heavy duty) pipe & fittings like tees, elbows, junctions, unions, bends, plugs etc.. Including a coat of Synthetic enamel paint over two coats of primer complete as required.
-
-
-
25 mm dia
30
515
15450
Providing & fixing CI ball valves of the following sizes suitable for pressure of 10 kg/sqcm complete with all necessary fittings
-
-
-
25 mm dia
4
6500
26000
Providing and fixing gun metal flot valve with necessary fittings complete as required.
-
-
-
25 mm dia
2
2500
5000
Providing "No smoking and Flammable" sign boars as per requirements of Petrolium Rules as required.
1
3500
3500
Supply and installation of 4 nos. fire bucket with sand with suitable bracket complite as required.
1
9500
9500
Supply and fixing of 9 kg foam type fire extinguisher complite as required.
2
5500
11000
11 KV Switchgear Panels
-
-
-
Design, Manufacture, Supply, delivery & Coordination with Contractor for Installation , Testing and commisssioning of following panel totally enclosed with CRCA sheet steel clad floor, mounting, epoxy based powder coating vermin proof, fully interlocked horizontal isolation, and extensible, horizontal draw out, vacuum insulated, metal clad switch board having single/double isolation features complete with circuits as detailed below. The switch board would be complete with necessary insulation – silicon based Raychem or equivalent insulated copper bursars, earthing switch/Truck, Wiring, labels, cable eyes, cable termination to receive XLPE cables, foundation bolts and suitable for operation on 11 KV 3 phase, 50 cycle, earthed system with a rupturing capacity of 350 MVA at 11 KV for 3 seconds.
-
-
-
Incoming 11 KV Panel Board
-
-
-
1 – Air insulated metal clad housing
-
-
-
1 – Set of 3 phase, insulated copper bus bars 630 amps rating.
-
-
-
6 – Single pole cluster type isolating contacts i.e. plug and switches.
-
-
-
1 – Triple pole draw out trolly mounted 11 KV 350 MVA, 630 Amps Vacuum circuit breaker fitted with arc control devices.
-
-
-
1 – Trip free 240 V AC, motor charged spring release closing mechanism complete with necessary auxiliary switches, emergency hand trip device and mechanical ‘OFF’ & ‘ON’ indicators.
-
-
-
6 nos NO/NC contacts
-
-
-
1 – 24 Volt DC shunt trip coil & closing coil.
-
-
-
3 – Dual core dual ratio cast resin current transformers of ratio 250-125/5 Class 5P10 and Class 1.0, 15 VA burden for protection & metering.
-
-
-
1-3 Phase cast resin horizontal draw out bus potential transformer ratio 11 KV / √3 : 110 / √3 Volt, class 1.0, 100 VA, connected star/star with H.V and L.V. connections, H.V. fuses and LV MCB of adequate rating to withstand fault level in P.T circuit, isolating plugs for H.V. and L.V. connection.
-
-
-
1- common Hooter
-
-
-
1 – Strip heater to prevent absorption of moisture.
-
-
-
The instrument and relay panel fitted with followings
-
-
-
1 – Digital voltmeter 0 – 12 KV with 3 way and OFF selection facility.
-
-
-
1 – Digital Ammeter (0-250) amps with 3 way and OFF selection facility.
-
-
-
1 no.Multi function Meter (MFM-1) with RS 485 of 1.0 accuracy to measure voltage, current, power factor, frequency, KW , KVA, KWH, KVAh.
-
-
-
1 – no. circuit breaker control switch for electrical (T/N/C)
-
-
-
1 – Triple pole numerical I.D.M.T. over current & earth fault relay with two outer elements connected for over current protection and the middle element for earth fault protection over current setting 50% - 200% Earth fault setting 20% - 80% (51 and 51N)
-
-
-
1 – Master trip relay (86)
-
-
-
1 – Trip circuit Supervision relay.(95)
-
-
-
1 – Anti pumping relay (94)
-
-
-
1 – Over Voltage relay (59)
-
-
-
1 – Set of red / green indicating lamps for close and open position with MCB.
-
-
-
1 – Amber indicting lamp for auto trip with MCB
-
-
-
1 – Clear indicating lamp for trip circuit healthy with MCB
-
-
-
1 – Set of RYB Phase indicating lamps one per phase with MCB
-
-
-
1 - Blue indicating lamp for spring charged.with MCB
-
-
-
1 – Push button on front door for emergency trip.
-
-
-
1 – Cable end box suitable for cable termination to receive 11 KV 3 core 240 sq.mm XLPE cable.
-
-
-
11KV, 1No Incoming Panel board as described above & as per specification including Power Pack for Auxiliary Services
1
557713
557713
415 Volts Panel
-
-
-
Design, manufacture, supplying, erection, testing and commissioning of the following front operated front access 2mm thick steel enclosure free standing, outdoor type, dust and vermin proof, Panel with IP42 Protection & Feeder Pillar with IP 55 whether proof protection with hinged and lockable doors complete with interconnections, electrolytic aluminium crimping lugs, brass glands, bonding to earth and painting,, suitable for use at 415 volts, 3 phase 4 wire 50 Hertz system, and with 25 MVA rupturing capacity at 415 volts.
-
-
-
Note : The following provisions shall be required to be made in the switchboard detailed below:
-
-
-
The switchboard shall be have provision for entry of all cables / bus duct from the top / bottom as required.
-
-
-
All live accessible parts shall be shrounded and all equipment shall be finger touch proof. The busbar insulation shall be with heat shrinkable sleeves. SMC/DMC shrounds and bus bar supports shall be used.
-
-
-
Suitable tinned copper extension links for incoming / outgoing cables shall be provided wherever required.
-
-
-
Control circuits includes breaker control switch, auto manual selector switch, spring charging trip indication Timer, control wiring, Auxiliary contactors MCB' as required at site.
-
-
-
All the incomers breakers shall be interlocked to avoid parallel operation.
-
-
-
All ACB, fault level breaking capacity indicates Ics value at 415 volts. (Ics = Icu = Icw = 100%) for 1 sec.
-
-
-
MCCB's in the MAIN LT Panel shall be with inbuilt Microprocessor based overload and short circuit & Earth fault release as per BOQ .
-
-
-
Link and drops from ACB / MCCB shall be designed for full rated current of ACB / MCCB rating at same amount of current density as of main bus bar.
-
-
-
Space heater / light / air filter/exhaust fan shall be provided for each vertical compartment.
-
-
-
All CT's shall have same fault level rating as their respective circuit breaker.
-
-
-
Bus bar size/rating, type of insulator, size of insulator, support for insulator, spacing of busbar support shall be as per CPRI approved design.
-
-
-
MAIN PANEL ( IP 42 PROTECTION)
-
-
-
INCOMER -I & II (250 KVA CSS 1W/1S)
-
-
-
2 nos.- 400 amps 35 kA 415 volt 4P MCCB with 4P MCCB Contactor with Thermal Magnetic based release with protection functions-overcurrent 40%-100% with time setting,selective short circuit 60%-1000% with time setting ,instantaneous short circuit 150%-1200%
-
-
-
3 nos - Cast resin current transformers of 400/5 ratio Class 1.0 for metering
-
-
-
1 - Digital Ammeter scaled 0-400 amps with 3 way and OFF selector switch
-
-
-
1 - Voltmeter scaled 0-400 volts with 3 way and Off selector switch
-
-
-
Red/Green ON/OFF indicating lamps
-
-
-
1 set of three RYB phase indicating lamps
-
-
-
1- Amber indicating lamp for auto trip
-
-
-
1- Blue indicating lamp for spring charged
-
-
-
Motor wound Spring closing meachanism
-
-
-
1 no Reverse Power Relay (32)
-
-
-
1 no Reverse Power Relay (32)
-
-
-
INCOMER -I (250 KVA DG SET 1W )
-
-
-
1 no.- 400 amps 35 kA 415 volt 4P MCCB with 4P MCCB Contactor with Thermal Magnetic based release with protection functions-overcurrent 40%-100% with time setting,selective short circuit 60%-1000% with time setting ,instantaneous short circuit 150%-1200%
-
-
-
3 nos - Cast resin current transformers of 400/5 ratio Class 1.0 for metering
-
-
-
1 - Digital Ammeter scaled 0-400 amps with 3 way and OFF selector switch
-
-
-
1 - Voltmeter scaled 0-400 volts with 3 way and Off selector switch
-
-
-
Red/Green ON/OFF indicating lamps
-
-
-
1 set of three RYB phase indicating lamps
-
-
-
1- Amber indicating lamp for auto trip
-
-
-
1- Blue indicating lamp for spring charged
-
-
-
Motor wound Spring closing meachanism
-
-
-
1 no Reverse Power Relay (32)
-
-
-
BUS COUPLER
-
-
-
1 nos - 400 Amps 415 volt 50 KA 4 pole MCCB with contactor with complete with:
-
-
-
Red/Green ON/OFF indicating lamps
-
-
-
BUS BAR SECTION -I&II
-
-
-
Electrolytic high conductivity aluminium three phase and neutral busbars rated at 500 amps having a minimum current density of 1.0 amp per sq mm and suitable to with stand symmetrical fault level of 35 kA at 415 volts. The neutral busbar is to be of 50% capacity.
-
-
-
OUT GOING SECTION -I & II
-
-
-
2 nos. 250 amps 35 kA 415 volt TPN MCCB with Thermal Magnetic based release with protection functions-overcurrent 40%-100% with time setting,selective short circuit 60%-1000% with time setting ,instantaneous short circuit 150%-1200% complete with :
-
-
-
3 nos - Cast resin current transformers of 250/5 ratio Class 1.0 for metering
-
-
-
1 - Digital Ammeter scaled 0-250 amps with 3 way and OFF selector switch
-
-
-
Red/Green ON/OFF indicating lamps
-
-
-
2 nos. 160 amps 35 kA 415 volt TPN MCCB with Thermal Magnetic based release with protection functions-overcurrent 40%-100% with time setting,selective short circuit 60%-1000% with time setting ,instantaneous short circuit 150%-1200% complete with :
-
-
-
3 nos - Cast resin current transformers of 250/5 ratio Class 1.0 for metering
-
-
-
1 - Digital Ammeter scaled 0-250 amps with 3 way and OFF selector switch
-
-
-
Red/Green ON/OFF indicating lamps
-
-
-
2 nos. 63 amps 35 kA 415 volt TPN MCCB with Thermal Magnetic based release with protection functions-overcurrent 40%-100% with time setting,selective short circuit 60%-1000% with time setting ,instantaneous short circuit 150%-1200% complete with :
-
-
-
3 nos - Cast resin current transformers of 60/5 ratio Class 1.0 for metering
-
-
-
1 - Digital Ammeter scaled 0-60 amps with 3 way and OFF selector switch
-
-
-
Red/Green ON/OFF indicating lamps
-
-
-
1 nos. 32 amps 35 kA 415 volt TPN MCCB with Thermal Magnetic based release with protection functions-overcurrent 40%-100% with time setting,selective short circuit 60%-1000% with time setting ,instantaneous short circuit 150%-1200% complete with :
-
-
-
3 nos - Cast resin current transformers of 60/5 ratio Class 1.0 for metering
-
-
-
1 - Digital Ammeter scaled 0-60 amps with 3 way and OFF selector switch
-
-
-
Red/Green ON/OFF indicating lamps
-
-
-
The Main Panel shall be complete with all interconnections, labels wiring, etc as required
1
775072
775072
CAPACITOR PANEL I&II ( 60 KVAR) ( IP 42 PROTECTION)
-
-
-
INCOMER
-
-
-
1 no.- 160 amps 35 kA 415 volt 4P MCCB with Thermal Magnetic based release with protection functions-overcurrent 40%-100% with time setting,selective short circuit 60%-1000% with time setting ,instantaneous short circuit 150%-1200%
-
-
-
3 nos - Cast resin current transformers of 160/5 ratio Class 1.0 for metering
-
-
-
1 - Digital Ammeter scaled 0-160 amps with 3 way and OFF selector switch
-
-
-
1 - Voltmeter scaled 0-160 volts with 3 way and Off selector switch
-
-
-
5 step automatic power factor correction relay to sense and monitor the system power factor and provide impulses for operation of 6 capacitor circuits as below.
-
-
-
1 set of three RYB phase indicating lamps
-
-
-
BUS BAR
-
-
-
Electrolytic high conductivity aluminium three phase and neutral busbars rated at 500 amps having a minimum current density of 1.0 amp per sq mm and suitable to with stand symmetrical fault level of 35 kA at 415 volts. The neutral busbar is to be of 50% capacity.
-
-
-
OUT GOINGS
-
-
-
3 nos. 32 amp TPN 35 kA MCCB with thermal over load and magnetic short circuit release and each complete with followings
-
-
-
3 pole capacitor grade contactor suitable for automatic switching of 12.5 kVAR capacitor bank
-
-
-
Red/Green ON/OFF indicating lamps
-
-
-
Auto/Manual Selector Switch
-
-
-
ON/OFF Push Button
-
-
-
12.5 kVAr hermetically sealed metallized polypropylene capacitor units complete with fuse protection, discharge resistors, interconnections etc complete as required .
-
-
-
3 nos. 32 amp TPN 35 kA MCCB with thermal over load and magnetic short circuit release and each complete with followings
-
-
-
3 pole capacitor grade contactor suitable for automatic switching of 7.5 kVAR capacitor bank
-
-
-
Red/Green ON/OFF indicating lamps
-
-
-
Auto/Manual Selector Switch
-
-
-
ON/OFF Push Button
-
-
-
7.5 kVAr hermetically sealed metallized polypropylene capacitor units complete with fuse protection, discharge resistors, interconnections etc complete as required .
-
-
-
The Capacitor Panel shall be complete with all interconnections, labels wiring, etc as required
2
202749
405498
CSF4 BUILDING PANEL ( IP 42 PROTECTION -INDOOR DUTY)
-
-
-
INCOMER
-
-
-
2 no.- 250 amps 25 kA 415 volt 4P MCCB with Thermal over load and Magnetic short circuit relase complete with
-
-
-
3 nos - Cast resin current transformers of 250/5 ratio Class 1.0 for metering
-
-
-
1 - Digital Ammeter scaled 0-250 amps with 3 way and OFF selector switch
-
-
-
1 - Voltmeter scaled 0-500 volts with 3 way and Off selector switch
-
-
-
BUS COUPLER
-
-
-
1 nos - 250 Amps 415 volt 35 KA 4 pole MCCB with complete with:
-
-
-
Red/Green ON/OFF indicating lamps
-
-
-
BUS BAR
-
-
-
Electrolytic high conductivity aluminium three phase and neutral busbars rated at 300 amps having a minimum current density of 1.0 amp per sq mm and suitable to with stand symmetrical fault level of 25 kA at 415 volts. The neutral busbar is to be of 50% capacity.
-
-
-
OUT GOINGS
-
-
-
8 nos. 63 amp 4P 10 kA MCB with thermal over load and magnetic short circuit release
-
-
-
7 nos. 40 amp 4P 10 kA MCB with thermal over load and magnetic short circuit release
-
-
-
2 nos. 40 amp DP 10 kA MCB with thermal over load and magnetic short circuit release
-
-
-
2 nos. 32 amp 4P 10 kA MCB with thermal over load and magnetic short circuit release
-
-
-
Electrically Mechanically Interlocked Incomer, Buscoupler & Busbar
-
-
-
The Panel shall be complete with all interconnections, labels wiring, etc as required
1
206757
206757
FEEDER PILLAR (OUTDOOR TYPE)
-
-
-
Fabrication, supply, installation, testing & commissioning of outdoor type compartmentalized feeder pillar tapered (hut type) made out of 2mm thick CRCA sheet having separate cable and bus bar alley double door arrangement with two leaf door on front side and single door with double leaf on rear side with locking arrangement, having 100 amp TPN Aluminum bus bar of full length with base frame made out of 50x50x6mm thick angle iron having 150 mm legs duly erection in ground with construction of cement concrete complete with connection and interconnection with copper conductor PVC insulated cables / insulated copper conductor strip of appropriate size and terminals blocks (on outgoing) including supplying and fixing following switch gears & accessories there in powder coating, labeling, earthing etc. complete as required
-
-
-
INCOMER
-
-
-
1 no. 63 Amps 10 kA 4 MCB with thermal over load and magnetic short circuit releaes
-
-
-
BUS BAR
-
-
-
Electrolytic high conductivity aluminium three phase and neutral busbars rated at 100 amps having a maximum current density of 1 amp per sq mm suitable to with stand symmetrical fault level of 10 KA at 415 volts. The neutral busbar is to be of 100% capacity.
-
-
-
INDICATING PANEL
-
-
-
The incomers shall have the following indicating panel
-
-
-
3 nos Cast resin current transformers of 63/5 ratio Class 1.0 for metering
-
-
-
1 no ammeter of 96 mm sq scaled 0-63 amps with 3 way and OFF selector switch
-
-
-
1 no voltmeter of 96 mm sq scaled 0- 500 volts with 3 way & OFF selector switch
-
-
-
1 set of indicating lamps (ON. OFF)
-
-
-
1 set of phase indicating lamps
-
-
-
OUT GOINGS
-
-
-
1 nos. 32 Amps 230 volt 10 kA 4P MCB with thermal magnetic protective releases.
-
-
-
3 nos. 32 Amps 230 volt 10 kA DP MCB with thermal magnetic protective releases.
-
-
-
1 nos 40 amp 10 kA 4P MCB with thermal magnetic protective releases with 40 amp TP Contactor with Dual setting 24 hour calibrated time switch for automatic operation of the supply, and 12 nos 6/10/16 amp SP 10 kA MCB's as outgoing.
-
-
-
The Feeder Pillar shall be complete with all interconnections, busbars etc. complete as per design to be approved by the Architects.
1
77401
77401
Cable & Termination
-
-
-
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. UPPWD-501
-
-
-
3.5 core 150 sq mm
180
957
172260
3.5 core 120 sq mm
350
824
288400
3.5 core 70 sq mm
100
613
61300
4 core 25 sq mm
50
373
18650
4 core 16 sq mm
300
343
102900
4 core 10 sq mm
150
327
49050
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. Based on DSR-9.1
-
-
-
3.5 core 150 sq mm. Based on DSR-9.1.26
16
574
9184
3.5 core 120 sq mm. Based on DSR-9.1.25
32
499
15996.8
3.5 core 70 sq mm . Based on DSR-9.1.23
16
441
7056
4 core 25 sq mm. Based on DSR-9.1.34
8
335
2683.2
4 core 16 sq mm . Based on DSR-9.1.33
64
331
21209.6
4 core 10 sq mm. Based on DSR-9.1.32
16
297
4764.8
S/L of 160mm dia. DWC pipe for drawing of power cable across the road by drilling of 190mm dia. at 1mtr. Below the road level the work should be done by manual Trenchless method. Complete in all respect per direction of Engineer-in-charge YEIDA SOR-14
100
740
74000
S/L of 200mm dia. DWC pipe for drawing of power cable across the road by driling of 230mm dia. at 1mtr. Below the road level the work should be done by manual Trenchless method. Complete in all respect per direction of Engineer-in-charge YEIDA SOR-15
100
796
79600
Providing, laying and fixing following dia RCC pipe NP2 class (light duly)in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement: 2 fine sand) including trenching (75 cm deep) and refilling etc as required. Based on DSR-14.14.
-
-
-
100 MM DIA. Based on DSR-14.14.1
30
443
13305
150 MM DIA. Based on DSR-14.14.2
30
456
13689
250 MM DIA. Based on DSR-14.14.3
70
634
44380
Earthing
-
-
-
Supply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing. UPPWD-701
4
4076
16304
Supply and burying of G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. UPPWD-703
16
5380
86080
Supply and burying of copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. UPPWD-705
8
10450
83600
Supply and laying of 32mm x 6mm copper strip from earth electrode directly in the ground as required complete in all respect. UPPWD-718
160
1110
177600
Supply and laying of 32 mm x 6 mm G.I. strip from earth electrode directly in the ground as required complete in all respect. UPPWD-717
320
150
48000
Supply and laying of 25mm x 5mm G.I. strip from earth electrode directly in the ground as required complete in all respect. UPPWD-716
150
90
13500
Supply and fixing of one number 8 SWG G.I. wire in 15mm dia. G.I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site. UPPWD-721
500
200
100000
Lightning Conductor
-
-
-
Providing and fixing of lightning conductor finial, made of 25 mm dia 300mm long, G.I. tube, having single prong at top, with 85mm dia 6mm thick G.I. base plate i ncluding holes etc. complete as required. Based on DSR-6.2
5
235
1175
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run). Based on DSR-6.7
150
522
78405
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run) . Based on DSR-6.8
50
522
26135
Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required. Based on DSR-6.12
5
556
2783
Earthing with G.I earth Plate 600 x 600 x 6 mm thick including accessories and providing mansory enlsoure with cover plate having locking arrangment and watering pipe of 2.7 metre long, with charcoal /coke and salt as required. Based on DSR-5.2
5
4141
20707
Jointing copper /G.I. tape (with another copper/ GI tape, base of the finial or any other metallie object) by riveting /nut bolting/sweating and soldering etc as required. Based on DSR-6.4
2
47
94.2
Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required. Based on DSR-6.14
65
378
24589.5
External Lighting & Poles
-
-
-
Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect. UPPWD-641
13
16500
214500
Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130 mm and base plate 12mm thik) having 3mm thikness with Double arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect. UPPWD-642
3
17100
51300
Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 Watt. Confirming to IP 66 protection complete in all respect. UPPWD-1421 CAT- AAA
19
4940
93860
Supply and fixing of decorative 8 to 16 Watt LED bollard luminaire with driver set confirming to IP 65 protection complete in all respect. UPPWD-1442 CAT- AAA
28
4070
113960
Supply & Fixing of XLPE insulated, Copper un-armoured Control cable 1100V grade etc. (A) 3 x 4 sq. mm. Based on DSR - 9.1.7
400
277
110840
Supply & Fixing of XLPE insulated Aluminium un-armoured Cable. (A) 3 x 6 sq. mm. UPPWD-501
200
284
56800
UPS SYSTEM
-
-
-
Supply , installation, testing and commissioning of IGBT Rectifier & Inverter based UPS system comprising of 1 no 15 kVA units with battery bank backup of 30 minutes duration for full load with all standards fittings, accessories, protection, instruments, indications and controls including but not restricted to transformer, rectifire, inverter, SMF battery with float cum boost battery charger, static bypass switch, maintenance bypass, output isolation transformer, interconnections etc.including warranty and free all inclusive comprehensive maintenance services for two years for UPS and battery bank after the date of handing over complete as per specification and as required.
1
545201
545201
\
-
-
22844799.7
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%