Yamuna Expressway Industrial Development Authority Tender

Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 140 to 150 Watt. Confirming to IP 66 Protection complete in all respect as per the directions of the Engineer-in-charge. (Make Philips, Crompton, Bajaj,) PS-1425 Cat-AAA

Supply & laying of aluminium conductor, XLPE insulated, armoured served, sheathed cable 1100 V grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the E/I, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. [CCI (Mumbai/Nasik), Fort Gloster (Kolkata), Asian (Thane/Silvasa), Universal (Satna), Nicco (Kolkata/Baripara), ICL (Rajpura), Diamond, Havells make] & for small works upto value of cable for Rs. 25.0 Lacs Kalinga (Gold), Suraj, Delton, Grandly & Polycab make can be used) complete in all respect as per the directions of the Engineer-in-charge PWD-2018/PS No-501 (a) 4 C x 16 Sqmm

Supply & Fixing of XLPE insulated, Copper un-armoured Control cable 1100V grade etc. Complete in all respects as per direction of the Engineer-in-charge. make- CCI, Gloster, Asian, Universal, Nicco, ICL, Diamond, Havells & KEI YEIDA SOR-1 (a) 3Cx1.50Sqmm

Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect as per the directions of the Engineer-in-charge .(a) 40 A TPN PWD-2018/PS No-807

S/F of 600mm x 600mm x 6.0mm G.I. plate, vertically for earthing with its top at least 3 Mtr. below ground level complete with 20 mm dia G.I. pipe & funnel for watering & one earthing lead of one no. 8 to SWG GI wire in 15mm dia G.I. pipe upto switch board (from apron to switch board the cost of GI pipe and GI wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of char-coal/coke & salt atleast 150 mm thick all-around etc. complete in all respect as per the directions of the Engineer-in-charge. PWD-2018/PS No-702

Supply and laying of 25mmx3mm G.I. strip from earth electrode directly in the ground as required complete in all respect as per the directions of the Engineer-in-charge PWD-2018/PS No-710

Supply & erection of overhead line with G.I. wire no. 8 to 4 SWG on poles/serivce bracket including binding etc. complete in all respect.as per the directions of the Engineer-in-charge. PWD-2018/PS No-628

S/L of 120mm dia. DWC pipe for drawing of power cable across the road by drilling of 150mm dia. at 1mtr. Below the road level the work should be done by manual Trenchless method. Complete in all respect per direction of Engineer-in-charge YEIDA SOR-13

Supply & fixing of palm or pin type copper tin plated cable socket (lug) to the cable leads, making connections etc. complete in all respects as per direction of the Engineer-in-charge. PWD-2018/PS No-504 16 Sqmm.

Numbering of poles with combination of yellow and black colour paint etc. complete in all respect.as per the directions of the Engineer-in-charge. Analysis Rate

LT Network

Supply, delivery, erection, testing & commissioning of cubicle type out-door weather proof main Feeder Pillar; made of 3mm MS sheet of size 1500X1000X600mm water tight, dust & vermin proof with hinged door & locking arrangement on front & rear side, 2 nos. locks, incoming & outgoing fuse carriers, cable entry, earthing strip, incorporating the following technical specifications with complete power coating & Single line diagram on main feeder pillar is to be painted showing feeding arrangement.

(a) Incoming 1 No. – 400 Amp. SFU with HRC fuse links. (EE/GE/C&S/Siemens/L&T make) (b) Bus-bar 500V, 400 Amp. TPN aluminium with insulation paint. Size 50X8 mm. (c) Outgoing 10 Nos. 150A TPN, 415V HRC fuse carriers with HRC fuse links (EE/GE, Siemens/L&T/C&S make.) As per drawing of feeder pillar enclosed. The feeder pillar will be mounted on cement concrete foundation 1:2:4 (1 cement: 2 coarsand graded stone aggregate 20 mm nominal size) of suitable size. The feeder will be manufactured by C.P.R.I. approved company. Complete in all respect per direction of Engineer-in-charge. (approx. wt. 196 kg. without accessories) YEIDA SOR-10

Supply, delivery, erection, testing & commissioning of cubicle type out-door weather proof sub feeder pillar; made of 3mm MS sheet of size 1500X900X600mm water tight, dust & vermin proof with hinged door & locking arrangement on front & rear side, 2 nos. locks, incoming & outgoing fuse carriers, cable entry, earthing strip, incorporating the following technical specifications with complete power coating. (a)Incoming 1 No. –200A TPN SFU (L&T/Siemens/C&S/EE/GE make) (b) Al bus bar 200A capacity of 40X5 mm size duly painted with insulation paint./PVC tape. (c) Out going 18 No. – 100 A (Kit Kat) (Havells/ L&T/ Siemens/ C&S/ EE/ GE make) The feeder pillar will be mounted on cement concrete foundation 1:2:4 (1 cement:2 coarsand graded stone aggregate 20 mm nominal size) of suitable size. The feeder will be manufactured by C.P.R.I. approved company. Complete in all respect per direction of Engineer-in-charge. (approx. wt. 181 kg. without accessories) YEIDA SOR-11

Supply & Laying of Aluminium Conductor XLPE insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top . On surface the cadle run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, Complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. complete in all respect as per direction of the Engineer-Incharge. PWD-2018/PS No-501

3.5Cx300 sqm.

 3.5Cx240 sqm.

 3.5Cx50 sqm.

S/L of 160mm dia. DWC pipe for drawing of power cable across the road by drilling of 190mm dia. at 1mtr. Below the road level the work should be done by manual Trenchless method. Complete in all respect per direction of Engineer-in-charge YEIDA SOR-14

S/L of 90mm dia. DWC pipe for drawing of power cable across the road by drilling of 120mm dia. at 1mtr. Below the road level the work should be done by manual Trenchless method. Complete in all respect per direction of Engineer-in-charge YEIDA SOR-12

S/F of palm or pin type copper tin plated cable socket (Lug) to the cable leads, insulating with tape & making connections etc. complete in all respects as per the directions of the Engineer-in-charge. PWD-2018/PS No-504

300 sqm.

240 sqm.

50 sqm.

Supply & fixing of brass nicle plated compression gland for PVC insulated & sheathed, armoured served, underground cable including rubber ring etc complete in all respects. The armouring of the cable shall be properly connected with earth as per direction of Engineer-in-charge. PWD-2018/PS No-503

300 sqm.

240 sqm.

50 sqm.

S/F of 600mm x 600mm x 6.0mm G.I. plate, vertically for earthing with its top at least 3 Mtr. below ground level complete with 20 mm dia G.I. pipe & funnel for watering & one earthing lead of one no. 8 to SWG GI wire in 15mm dia G.I. pipe upto switch board (from apron to switch board the cost of GI pipe and GI wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of char-coal/coke & salt atleast 150 mm thick all-around etc. as per direction of Engineer-in-charge complete in all respects. PWD-2018/PS No-702

S/L of Horizental air termation (roof Conductor) of 25mmx3mm GI. Strip ,GI. Clamp on surface complete in all respect as approved by engineer-in-charge. PWD-2018/PS No-710