Yamuna Expressway Industrial Development Authority Tender

Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 52 watt to 72 Watt. Confirming to IP 66 protection complete in all respect (Bajaj, Crompton , Philips) PWD-2018 PS-1422 Cat -AAA

S/E of ‘D’ clamps 50X6mm. flat iron on steel tubular pole / steel rail pole with bolts, nuts etc complete in all respect including with aluminium paint. PWD-2018 PS-623

S/F of 50Sqm to 16Sqm L.T ABC Connector on Pole complete in all respect, as directed by Engineer in charge YEIDA SOR-36

S/F of 40mm. dia 1.5mtr. Long G.I. pipe ‘B’ Class bracket with 2 Nos. ‘D’ clamps 50X6mm. flat iron on steel tubular pole / PCC pole with bolts, nuts etc. complete in all respect, as directed by Engineer in charge. YEIDA SOR-35

Supply & Fixing of XLPE insulated, Copper un-armoured Control cable 1100V grade etc. Complete in all respects as per direction of the Engineer-in-charge. make- CCI, Gloster, Asian, Universal, Nicco, ICL, Diamond, Havells & KEI YEIDA SOR-1

Supply & erection of screw tightener complete in all respect, as directed by Engineer in charge YEIDA SOR-37

Supply & fixing of stay insulator with stay wire complete in all respect, as directed by Engineer in charge YEIDA SOR-38

Supply, delivery, testing, laying of Al. conductor HDPE/XLPE insulated 1100V grade Arial Bunched Cable with Messenger wire as below on pole complete in all respect. (CCI, Gloster, Asian, Universal, NICCO, ICL, Diamond, Havells, Kalinga, Suraj, Delton Grandley & Polycab, make) Complete in all respect, as directed by Engineer in charge. as per the directions of the Engineer-in-charge. YEIDA SOR-76 (a) 2CX16 Sqmm. + 25 Sqmm.

Supply and Fixing of high mast lightning control panel 415V, 3-phase, Outdoor type made out of 14SWG GPSP sheet with Canopy complete. The enclosure must be dust & weather proof, attractively powder coated, canopy, locking arrangement & should confirm IP-55 complete as required. Incomer consist of 63 Amp. 4 Pole MCB -1 no along with DC operated Pre magnetic type contactor of 50 Amp. Three pole -1 no. The control panel must have control accessories like Astronomical Timer switch with all essential controls- 1 no, Auto/manual Selector Switch -1 no & R Y B Led Indications. There also shall have a provision of Forward reverse starter for 2 HP motor with three pole 12 Amp. Power contactor & push buttons. The Control panel must have outgoing 25 Amp. Single Pole -6 no’s along with insulated Bus bars with heat shrinkable PVC sleeved complete with control wiring, name plate, danger plate etc. and compartments with hinged door and its accessories, bolted door etc.complete in all respect, as directed by Engineer in charge.

Supply & laying of aluminium conductor, XLPE insulated, armoured served, sheathed cable 1100 V grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the E/I, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. [CCI , Gloster , Asian , Universal , Nicco, ICL , Diamond, Havells make] & for small works upto value of cable for Rs. 25.0 Lacs Kalinga (Gold), Suraj, Delton, Grandly & Polycab make can be used) complete in all respect, as directed by Engineer in charge PWD-2018 PS No 501 a) 4C x 16 Sqmm

Supply & laying of aluminium conductor, XLPE insulated, armoured served, sheathed cable 1100 V grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the E/I, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. [CCI , Gloster , Asian , Universal , Nicco, ICL , Diamond, Havells make] & for small works upto value of cable for Rs. 25.0 Lacs Kalinga (Gold), Suraj, Delton, Grandly & Polycab make can be used) complete in all respect, as directed by Engineer in charge PWD-2018 PS No 501 a) 3.5C x35 Sqmm

Supply & laying of aluminium conductor, XLPE insulated, armoured served, sheathed cable 1100 V grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the E/I, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. [CCI , Gloster , Asian , Universal , Nicco, ICL , Diamond, Havells make] & for small works upto value of cable for Rs. 25.0 Lacs Kalinga (Gold), Suraj, Delton, Grandly & Polycab make can be used) complete in all respect, as directed by Engineer in charge PWD-2018 PS No 501 a) 3.5C x70 Sqmm

S/F of 600mmX600mmX6.0mm G.I plate, vertically for earthing with its top atleast 3 mtr . Below ground level complete with 20mm dia GI pipe & funnel for watering & one earthing lead of 25X3 mm Al-strip &30 mm dia GI pipe upto switch board &other equipment 300 sqmm. GI box with hinged cover masonry housing alternate layers of char-coal/coke & salt atleast 100 mm thick allaround etc. complete in all respect, as directed by Engineer in charge. PWD-2018 PS-702

S/L of 25mmX3mm G.I. strip from earth electrode directly in the ground as required complete in all respect, as directed by Engineer in charge. PWD-2018 PS-710

S/L of 90mm dia. DWC pipe for drawing of power cable across the road by drilling of 120mm dia. at 1mtr. Below the road level the work should be done by manual Trenchless method. Complete in all respect per direction of Engineer-in-charge YEIDA SOR-12

S/f of brass nicle plated compression gland for PVC insulated & sheathed, armoured served underground cable including rubber ring etc complete in all respects. The armouring of the cable shall be properly connected with earth complete in all respect, as directed by Engineer in charge. PWD-2018 PS-503 a) 16sq mm.4 core

S/f of brass nicle plated compression gland for PVC insulated & sheathed, armoured served underground cable including rubber ring etc complete in all respects. The armouring of the cable shall be properly connected with earth complete in all respect, as directed by Engineer in charge. PWD-2018 PS-503 a) 35sq mm.3.5core

S/f of brass nicle plated compression gland for PVC insulated & sheathed, armoured served underground cable including rubber ring etc complete in all respects. The armouring of the cable shall be properly connected with earth complete in all respect, as directed by Engineer in charge. PWD-2018 PS-503 a) 70sq mm.3.5core

S/f of palm or pin type copper tin plated cable socket (Lug) to the cable leads, insulating with tape & making connections etc complete in all respects as per the directions of the Engineer-in-charge PWD-2018 PS-504 a) 16sq mm.

S/f of palm or pin type copper tin plated cable socket (Lug) to the cable leads, insulating with tape & making connections etc complete in all respects as per the directions of the Engineer-in-charge PWD-2018 PS-504 a) 35sq mm.

S/f of palm or pin type copper tin plated cable socket (Lug) to the cable leads, insulating with tape & making connections etc complete in all respects as per the directions of the Engineer-in-charge PWD-2018 PS-504 70sq mm.

Supply & erection of Steel tubular pole with 1/6 over all length of pole grouted with cement concrete in 1:3:6 (1 cement : 3 coarse sand : 6 stone ballast) including plinthing of pole 30 cm above the ground level, plastering of plinth including excavation back filling etc. The rates includes all materials labour & T&P. etc. required for proper completion of work as per direction of E/I. d) 410 SP-55, 11mtr. (Approx. wt. 232kg.) YEIDA SOR-24

Supply and erection of 8.5 M. long P.C.C. pole, confirming to IS 1678-1960, IS 343-1960 and IS 456-1964 grouted with 1:4:8 cement concrete (1 cment, 4 fine sand : 8 over burnt brick ballast of 40 mm nominal size) including the plinthing of pole. Complete with all material, labou, T&P etc. and also including cartage of pole from store to site of works. complete in all respect, as directed by Engineer in charge YEIDA SOR-33

S/F of 0.3mtr. long top channel for pin made of 100X50X6 mm M.S. channel with M.S. clamp packing box nut bolt etc. complete in all respect, as directed by Engineer in charge YEIDA SOR-32

S/F of cross arm made of 100X50X6 mm M.S. channel 1.15 mtr. long with M.S. clamp packing piece Nut bolts etc. complete in all respect, as directed by Engineer in charge YEIDA SOR-31

S/F of 11 KV Polymeric pin insulator with pin on poles or anywhere specified including bolts to fasten on pole cap/cross arm with the poles.(Jaishree, BHEL,RR, Hindustan, Yamuna, AD, make) Complete in all respect, as directed by Engineer in charge. YEIDA SOR-78

S/F of 11KV Polymeric Disc with Gun fittings on cross arms/clamps fixed on poles including all Nut, bolts & washer etc. (Jaishree, BHEL,RR, Hindustan, Yamuna, AD, make) Complete in all respect, as directed by Engineer in charge. YEIDA SOR-79

S/F of cross arm made of 100X50X6 mm M.S. channel 2.5 mtr. long on poles with packing, piece, M.S. clamp, Nut bolts etc. complete in all respect, as directed by Engineer in charge YEIDA SOR-30

Supply, Sagging, tensioning, jointing and bending of suitable size ACSR conductor conferming to I.S. specification including cost of aluminium wire and jointing sleeve required. The rates includes cost of material, labour, T&P etc. required for proper completion of work as per the directions of the Engineer-in-charge. PWD-2018 P.S.-627 Rabbit conductor.

S/E of stay set at least 3.5 mtr away from the pole complete with galvanized 19mm dia x 1.800 mtr long stay rod. 30cmx30cmx6.3mm anchor plate thimble stay clamps, stay insulator 19mmx600mm double screw tightener. 7/4.00 mm G.I. stay wire etc. in 1:3:6 cement concrete in all respect.as per the directions of the Engineer-in-charge. PWD-2018 P.S. 630.

Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect.40/63A TPN PS-807

Supply, Installation, testing and commissioning of Outdoor type distribution transformer. Specification and also confirming to IS: 1180. Level-2 as per the directions of the Engineer-in-charge Analysis of Rates (a) 63 KVA Aluminium wound YEIDA SOR-34

S/F of 11 KV TPMO set of ‘Relco’ make or equivalent with insulators and other accessories required for proper completion of work.as per the directions of the Engineer-in-charge YEIDA SOR-56

S/F of 11 KV Drop-out type fuse set channel type of ‘Relco’ or equivalent make with insulators and other accessories required for proper completion of work.as per the directions of the Engineer-in-charge YEIDA SOR-57

Dismantling of pole/ street light standard/ strut embedded in brick ballast foundation etc. as required.Based DSR -2018/12.41

Dismantling of over head lines comprising of copper/ aluminium over head conductor, G.I. wire, cross arms, insulators etc.as required.Based DSR -2018/12.40