Varanasi Development Authority Tender

(-)M-150 brick work in 1:4 cement and coarse sand of 1.25 fineness modulous mortar in foundation and plinth including supply of all material, labour and tools and plants etc. required for proper completion of work. [PWD SOR 2020-305(b)]

(-)65 mm thick Chunar dressed sand stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar

(-)Dismantling existing plaster including disposal of refuse as directed by Engineer-in-charge within a distance of 60 meter (SOR 2021 SI No 706)

(-)12mm thick plaster with cement mortar consisting of 1 part cement and 4 part of coarse sand minimum thickness no be less than 10mm including supply of all materials, labour and T&P etc. required for proper completion of the work. [Based on SOR 2020, SI No. 584]

(-)Painting or varnishing new iron work in small areas or new wood with Two coat (up to one Sq.meter) of ready mixed priming paint and one coatof apporved superior quality ready mix paint (2nd quality synthetic enamel paint of apporved brand such as British paint, Shalimar, Asian or equivalent as appoved by E/I) or Varnish including supply of all materials, labour, T&P etc, required for proper completion of the work . Paint to be used should confirm the I.S.I. No. 103-1950. P.W.D. SOR-2020 641+642

(-)Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm). [DSR 2021, SI. No. 13.47.1]

(-)Mild steel or iron work in heavy sizes such as built up gates, trusses, record racks etc wrought to required form including drilling holes, rivetting and welding where necessary and their fixing required for proper completion for the work. [SOR-2020 SI. No. 503]

(-)Providing and fixing of CC Bench as per Direction by Engineering incharge

(-)Open Gym Equipment Providing & Fixing of Chest Press having Dimension : • Product Area : 2.3m x 1.2m (7.5ft x 4ft)• Safe Play Area : 3.3m x 2.2m (10.8ft x 7.2ft)• Ideal For : 13 Years & above Function: •Strengthens Chest muscles, Forearms & Triceps. Technical Specification: •Post Dia: 100NB GI main vertical support pipe of Shoulder Exerciser Double is fixed over 10mm thick base plate. 10mm thick clamping plates are attached.To main frame to hold the rest of assemblies.•Seat frame: Seat Frame made from 40NB bend GI pipes and Material used for seat are HDPE (High- Density Polyethylene) UV stabilized with UV property/LLDPE.This seat frame is mounted on vertical support pipe through 40NB GI pipe links with the help of specially designed bearing housings. Connecting link plates are 8mm thick. •Footrest/Handle: 25NB GI pipe is attached to seat frame to form a foot rest. Handle made up of 25NB Pipe with pvc end cap.•Pipes: All metal pipes are Hot Dipped Galvanized Pipes conforming to IS 1239 (Part 1) with GI thickness of 60micron.•Pipe Materials or Class: Heavy Duty ('C' Class) Series of pipes only. Wall thickness of pipe varies according to class/series of pipe used.•Powder coating:it shall be done with pure polyester raw material.Dry film Thickness maintained within the range of 50-70 microns.it is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instruments.•Bearing Housing shall be made from solid bar of MS material.•Bearing: Bearings are oil sealed, self-lubricated made of SKF/ NTN/ NACHI make shall be provided for smooth & trouble-free movement.•Pins and Circlips: 25mm diameter pins shall be made from EN8 material & Circlips made from standard material.•Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment.

(-)Providing & Fixing of Shoulder Exerciserhaving Dimension : • Product Area : 1.2m x 0.9m (3.9ft x 3ft)• Safe Play Area : 2.2m x 1.9m (7.2ft x 6.2ft) Ideal For : 13 Years & above Function: Strengthens Shoulder & Arms. Technical Specification: •Post Dia: 100NB GI main vertical support pipe of Shoulder Exerciser Double is fixed over 10mm thick base plate. 10mm thick clamping plates are attachedto main frame to hold the rest of assemblies.•Seat frame: Seat Frame made from 40NB bend GI pipes and Material used for seat are HDPE (High- Density Polyethylene) UV stabilized with UV property/LLDPE.This seat frame is mounted on vertical support pipe through 40NB GI pipe links with the help of specially designed bearing housings. Connecting link plates are 8mm thick. •Footrest/Handle: 25NB GI pipe is attached to seat frame to form a foot rest. Handle made up of 25NB Pipe with pvc end cap.•Pipes: All metal pipes are Hot Dipped Galvanized Pipes conforming to IS 1239 (Part 1) with GI thickness of 60micron. •Pipe Materials or Class: Heavy Duty ('C' Class) Series of pipes only.Wall thickness of pipe varies according to class/series of pipe used.•Powder coating:it shall be done with pure polyester raw material.Dry film Thickness maintained within the range of 50-70 microns.it is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instruments. •Bearing Housing shall be made from solid bar of MS material.•Bearing: Bearings are oil sealed, self-lubricated made of SKF/ NTN/ NACHI make shall be provided for smooth & trouble-free movement.•Pins and Circlips: 25mm diameter pins shall be made from EN8 material & Circlips made from standard material.•Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment.

(-)Providing & Fixing of ABS Board having Dimension : • Product Area : 1.6m x 0.8m (5.2ft x 2.6ft)• Safe Play Area : 2.6m x 1.8m (5ft x 5.9ft)• Ideal For : 13 Years & aboveFunction: • Strengthens Shoulders & Forearms • Improves Wrist agility. Technical Specification: •Main Structure: The ABS Board shall be having Ergonometric design with main support of 50NB Pipe.•Galvanized round pipe having 50NB with pipe rectangular 50 X 25 X 3 mm to be welded to the main support frame. •Backrest: Backrest sheet having 3mm thick to be made from FRP Materials•Pipes: All metal pipes are Hot Dipped Galvanized Pipes conforming to IS 1239 (Part 1) with GI thickness of 60micron.•Pipe Materials or Class: Heavy Duty ('C' Class) Series of pipes only.Wall thickness of pipe varies according to class/series of pipe used.•FRP products: It is made up of Fiber reinforced plastic (FRP) process. It is made up of 3-4 mm thick fiber reinforced plastic. The FRP material is tested for abrasion resistance &UTS (ultimate tensile test) •Powder coating:it shall be done with pure polyester raw material.Dry film Thickness maintained within the range of 50- 70 microns.It is tested for adhesion test (According to ASTM- D-3359) with the help of cross hatch cutter instruments. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment.

(-)Providing & Fixing of Walker having Dimension: • Product Area : 2.5m x 0.8m (8.2ft x 2.6ft)• Safe Play Area : 3.5m x 1.8m (11.5ft x 5.9ft)• Ideal For : 13 Years & above Function: • For lower body workout. Technical Specification: •Two side frames of WALKER are made from 80NB & 40NB Galvanized pipes.•The handle pipe: consists of 25NB Galvanized pipes with Rubber grip on top end. This handle pipes are hinged over 80NB frame.The handle pipe is further extended to the rectangular tube of 50 x 25 mm on both sides with 40NB galvanized pipe links.•Footrest: The materials used for footrest are aluminum /LLDPE/HDPE/Nylon. •Bearing Housing shall be made from MS material. •Bearing: Bearings are oil sealed, self-lubricated made of SKF/ NTN/ NACHI make shall be provided for smooth & trouble-free movement.•Pipes: All metal pipes are Hot Dipped Galvanized Pipes conforming to IS 1239 (Part 1) with GI thickness of 60micron.•Pipe Materials or Class: Heavy Duty ('C' Class) Series of pipes only.Wall thickness of pipe varies according to class/series of pipe used.•Powder coating:it shall be done with pure polyester raw material.Dry film Thickness maintained within the range of 50-70 microns.it is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instruments. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment.

(-)KIDS PLAY EQUIPMENT Supply & fixing of DOUBLE SWING • Product Area : 3m x 2.5m (10ft x 8.2ft) • Safe Play Area : 4.2m X 2.5m (13ft X 11.5ft) • Ideal For:4-14 Years • Friends at a time : 2 Technical Specification: •Swing leg pipe: 40NB hot dip galvanized swing leg pipe of length 2950mm conforming to IS 1239 with Gl thickness of 60u. •Top pipe :50NB hot dip galvanized swing top pipe of length 2950mm conforming to IS 1239 with Gl thickness of 60µ with an ISF conforming to IS 1730-1961 welded at its both ends to junction box. Pipe can withstand torsional stress created due to swinging motion. •Junction box: 225mmx103mm junction box made from 3mm thick GI Plated plate to house the two swing leg pipes & top pipe. •Seat assembly: 1) Swing clamp assembly: Swing clamps made up of two parts are joined together with M6 Allen bolts along with S-Hook & a specially The S-Hook is specially designed to house a bearing for smooth & designed swing pin. noiseless swinging. The clamps are made from injection moulded Nylon-6 plastic. 2) Chain: Rubber dip moulded swing chain of dia. 6mm & 1450mm Long. 3) Hook: S-Hook of dia 8mm & 145x130 Triangular hook of Grade SS 304. 4) Seat: Rubber Seat made by Natural Rubber with sufficient reinforcement. •Pipe Materials or Class: Light Duty ('A' Class) & Medium Duty ('B' Class) Series of pipes only. Wall thickness of pipe varies according to class / series of pipe used. •Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instrument, Bearing: Bearing is self-lubricated made of SKF/ NTN/ NACHI make shall be provided for smooth & trouble-free movement. Pins and Circlips: 12mm diameter pins shall be made from EN8 material & Circlip A10. Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment.

(-)KIDS PLAY EQUIPMENT Supply & fixing of DOUBLE SWING • Product Area : 3m x 2.5m (10ft x 8.2ft) • Safe Play Area : 4.2m X 2.5m (13ft X 11.5ft) • Ideal For:4-14 Years • Friends at a time : 2 Technical Specification: •Swing leg pipe: 40NB hot dip galvanized swing leg pipe of length 2950mm conforming to IS 1239 with Gl thickness of 60u. •Top pipe :50NB hot dip galvanized swing top pipe of length 2950mm conforming to IS 1239 with Gl thickness of 60µ with an ISF conforming to IS 1730-1961 welded at its both ends to junction box. Pipe can withstand torsional stress created due to swinging motion. •Junction box: 225mmx103mm junction box made from 3mm thick GI Plated plate to house the two swing leg pipes & top pipe. •Seat assembly: 1) Swing clamp assembly: Swing clamps made up of two parts are joined together with M6 Allen bolts along with S-Hook & a specially The S-Hook is specially designed to house a bearing for smooth & designed swing pin. noiseless swinging. The clamps are made from injection moulded Nylon-6 plastic. 2) Chain: Rubber dip moulded swing chain of dia. 6mm & 1450mm Long. 3) Hook: S-Hook of dia 8mm & 145x130 Triangular hook of Grade SS 304. 4) Seat: Rubber Seat made by Natural Rubber with sufficient reinforcement. •Pipe Materials or Class: Light Duty ('A' Class) & Medium Duty ('B' Class) Series of pipes only. Wall thickness of pipe varies according to class / series of pipe used. •Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instrument, Bearing: Bearing is self-lubricated made of SKF/ NTN/ NACHI make shall be provided for smooth & trouble-free movement. Pins and Circlips: 12mm diameter pins shall be made from EN8 material & Circlip A10. Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment.

(-)Providing and fixing of NET ROCK SCRAMBLER 2.1 Mtr • Product Area :2.5mx 1.5m (8.2ft x 5ft) • Safe Play Area : 3.5mx 2.5m (11.5ft x 8.2ft) • Age Group : 4 -12 yrs Friends at a time : 3-4 80640 Technical Specification: •Pad: Rock climber 5Ft. pad made from Fiber Reinforced Plastic (FRP) attached to the angular frame. The pad is provided with rock shaped part ergonomically spaced in zig-zag manner for climbing act. The rocks are bolted on same platform, with a gradient of 65 degree from the ground. •Supports: Bend angular frame made from 40NB Galvanized pipe conforming to IS 1239:1979 with base plates fixed on each end and grounded for strong foundation. It has Ø12 U-hook on one side for attaching rope. It has profile plate for top support. And has plate 130x50x5 for bottom support. •Top pipe: It is made from 40NB top pipe of 1190mm long with Dia. 12 U-Hooks fixed on one side. •Rope: Rope size conforming to standards En 1176-1:1998 for minimum grip requirement. It is size of Ø18 of conforming to standards EN1176-1:1998& ASTM - F1487:07a for safety against entrapment of head & neck •Clamp: Its is made from nylon. nylon rope attached by specially designed nylon rope clamps used which has rope integrated inside which hold it tightly and avoids breaking •Bottom pipe: It is made from 4ONB bottom pipe of 1190mm long with Dia. 12 U-Hooks fixed on one side. •Rock: It is made from Fiber Reinforced Plastic (FRP). •Pipes: All metal pipes are Hot Dipped Galvanized Pipes conforming to IS 1239 (Part 1) with Gl thickness of 60micron. • For "FRP (FIBER REINFORCED PLASTIC):-All the Fibre Reinforced Plastics (FRP) materials are processed by the hand laid process which is considered to be the best of its type. We use international quality of Gel coats which is duly mixed with UV stabilized pigment to give the required colour to the product. Thickness of the FRP material varies from 3 mm to 5 mm as per the product. The FRP material is tested for abrasion resistance & UTS (ultimate tensile test). •Pipe Materials or Class : Medium Duty ('B' Class) & Light Duty ('A' Class) Series of pipes only. Wall thickness of pipe varies according to class / series of pipe used. •Powder coating: shall be done of pure polyester exteriors ultra- stabilized powder Paints, Thickness maintained is a minimum of 60-70microns. •Nut and Bolts: Galvanized/ SS/Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI/ PVC caps for user safety against entrapment.

(-)Deluxe wave Slide (i) Product area H=5', W=21", L=12', (ii) Size= H=7', W=21", L=16.5', (iii) Age Group = up to12 years (iv) Capacity = 3-4 Children (v) Accessories :- (a) Deluxe wave slide (b) Platform © Step (d) Safety Railing Structure :- (a) GI pipe with PP Powder coated, (b) Heavy Duty fibre with High glossy Finish (c) UV stabilized colour

(-)SHED Providing and fixing of Shade : Using 80mm dia hollow MS pipe medum qulity @ 10.10 kg. per Rmt. hight of shade above GL 4 mtr. Grouting in ground wrth. 1:2:4 cement concrete, fixing of 6 mm thick Polycarbonet sheet using proper hook and washer. Primer and painting work will be done MS structure.

(-)Solar LED Street Light Providing. Fixing and installation of solar led street light 18 watt with solar 75 watt,solar battery 60AH,G.I. Pole 5 m including all materials in use stander and famous company tranportation.T&P complete (CMR) (vda approved)