Uttar Pradesh State Tourism Development Corporation Limited Tender

SITC of exterior rated Architectural RGBW Linear LED Wall Washer luminaire, suitable for facade lighting with extruded aluminium housing, powder-coated finish, Clear toughened glass of 4mm thickness and die casted end caps, Total System wattage 36W-40W with system humen output should be more than 1400 Im with all LEDs on. The Fixture beam angle should be 25/40/17x35/30x65 degree, Fixture beam should be Luminaire shall be capable of producing dynamic color changing light with 16 million colors as the light fixture should be programmable using 8 bit control DMX512 protocol/Ethernet based control. Luminaire should be complete with dedicated Lens made up of UL/VDE approved PC for each LED, offering beam angle of different types such as narrow, medium, wide or elliptical as per the site requirement. Fixture should have Height 80 mm ± 5% including surface mount base width 59 mm ± 596, Min length 1000 mm ±5% with constant locking hinges for simple position control from various angles without special tools. DMX enabler circuit should be inside the Luminaire only. The rated voltage of the Luminaire should be 230Vac, Luminaire shall be offered with a BIS Approved Potted Driver of IP 66/67 rating made of extruded aluminium to make it more thermal efficient, Led Driver should have Operating input voltage range: 90-305VAC, PF 0.90 and must have safety operation range form 90V-176Vac. Life time of LED driver should be 80,000 hours and MTBF of LED driver should be≥2,00,000 hrs, Led driver must have SELV output and Case temperature ie. Te 90°C. Fixture shall be suitable to operate at an ambient temperature range of -20°C to 50°C and complete luminaire shall be IP66 and IK07 rated. LED Life time shall be at least L70B50 @ 70000 burning hours at 50°C. LED should be with ceramic paste of make Nichea, Osram, Cree, Lumiled only. The product should be BIS approved with R number mentioned on product label. To be supported with Product test reports - LM79, BIS Report and LEDs Test Reports. Luminaire shall be conforming to BIS ie. IS 15885 (Part 2/Sec- 13) and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required Operation & maintenance of 5 Years

STTC of exterior rated Architectural LED RGB flood lighting luminaire; suitable for facade lighting with Die-cast aluminum housing, powder-coated finish, Clear toughened glass of 4mm thickness, Total System wattage not exceeding 28W-30W with system lumen output should be more than 1600 lm with all LEDs on Luminaire shall be capable of producing dynamic color changing light with 16 million colors as the light fixture should be programmable using 8 bit control DMX512 protocol/Ethernet based control. Luminaire should be complete with dedicated Lens made up of UL/VDE approved PC for each LED, offering beam angle of different types such as narrow, medium, wide or elliptical as per the site requirement. Fixture should have Height 208 mm+1% including surface mount base and outer dia of 224 mm+1% with constant locking hinges for simple position control from various angles without special tools. Fixture shall be suitable to operate at an ambient temperature range of -30°C to 50°C and complete luminaire shall be IP66 and IK07 rated LED Life time shall be at least L70B50 @70000 burning hours at 50°C. LED should be with ceramic package of make Nichea, Osram, Cree, Lumiled only. DMX enabler circuit should be inside the Luminaire only.. Luminaire shall be complete with integrated BIS IP 66/67 potted driver and capable of operating at line voltage from 90-305 Vac, 50Hz with power factor 0.9. The product should be BIS approved with R number mentioned on product label. To be supported with Product test reports - LM79, BIS Report and LEDs Test Reports. Luminaire shall be conforming to BIS Le IS 10322 (Part 5/Sec 5) and shall be complete with all necessary accessories required for proper working of fixture including & weather proof connection cables, water proof connectors etc. as required, Operation maintenance of 5 years.

SITC of exterior rated LED RGB/RGBW Flexible LED Strip with 14.4 Watt per meter. LED Strip should have 60Nos LEDS per meter through out the length with the silicon cover with system lumen output should be more than 700 Ims/Meter. Standard Length of LED Strip is 5 Mtr and it shall be capable of producing dynamic colours changing light for with 16 million colours and should be programmable using 8 bit control DMX512 protocol/Ethernet based control. The Strip should have IP 67 protection with inbuilt IP67 connectors at both ends. DMX enabler circuit should be outside the Luminaire/LED Strip only. LED Strip shall be suitable to operate at an ambient temperature range of -20°C to 50°C. Life time shall be at least L70B50@35000 burning [hours at 50°C. LED should of make Nichea, Osram, Cree, Lumiled, Hongya of 5050 SMD package only. Pack of 5Mtr. The rated shall be offered with a BIS Approved Potted Driver of IP 66/67 rating voltage of the Luminaire should be 24VDC, Luminaire made of extruded aluminium to make it more thermal efficient, Led Driver should have Operating input voltage range: 90- 305 Vac, PF 0.95 and must have safety operation range form 90V-176Vac. Life time of LED driver should be 80,000 hours and MTBF of LED driver should be≥2,00,000 hrs, Led driver must have SELV output and Case temperature i.e. Te90°C. The product should be BIS approved with R number mentioned on product label. To be supported with Product test reports - LM79, BIS Report and LEDs Test Reports. Luminaire shall be conforming to BIS ie. IS 10322 (PART 5/SEC 7) and shall be complete with all necessary mounting accessories required for proper working of fixture including driver, decoder, aluminium profile with diffiser cover, weather proof connection cables, water proof connectors etc. as required , Operation & maintenance of 5 years,