Uttar Pradesh State Road Transport Corporation Tender
... More
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of etender.up.nic.in - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Uttar Pradesh State Road Transport Corporation - UPSRTC Tender
Civil And Construction
Energy, Oil and Gas
Civil Works Others
Electrical and Electronics
Electrical Works
Eprocure
Opening Date11 Mar 2025
Closing Date25 Mar 2025
Tender Amount₹ 3,65,99,005
Technical
Technical
Financial
Additional Eligibility
Class Of Bidder
... View More
Appropriate Category
Bid Capacity
... View More
The bid capacity required can be calculated using specific formulas. 1. Cumulative Financial Turn Over: 1.5 Times of bid value of last Three Financial Years
2. Current Liquid Assets: 15 % of the bid value These can be represented as:
- Cumulative Financial Turn Over: 1.5 * Bid Value
- Current Liquid Assets: 0.15 * Bid Value Note that the exact bid value is necessary to calculate the specific bid capacity required.
Technical Capacity
... View More
The required prior work experience for the bidder is at least three years in the organized sector. The bidder should have completed two similar works, with at least one of them in the organized sector, costing not less than 50% of the bid value. Alternatively, the bidder can have completed one similar work costing not less than 80% of the bid value. The value of work done in the last three years should be at least double the bid value quoted in the tender documents.
Costs
EMD
₹ 8,65,800Document Cost
₹ 25,960Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_UPSRT_1016136_1Tender No
127/B/DA/W/Tender/2025Tender Authority
Uttar Pradesh State Road Transport Corporation ViewPurchaser Address
-Website
http://http://www.upsrtc.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In lime mortar with old mughal bricks
94.52
1359
128524.52
... More
Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge.
135.89
376
51195.2
... More
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1cement: 4 coarse sand)
1077.62
427
460542.46
... More
Cost of Hydraulic Excavator of 1 cu m bucket capecity.
168
900
151200
... More
Providing and laying Vitrified tiles in floor without lean concrete of 500x 500mm sizes (thickness 10mm), with water absorption less than 0.08% and onforming to IS:15622, of approved brand & manufacturer, in desired colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, including grouting of joints. Same as above but for 600X600mm size.
668.09
1184
791332.56
... More
Excavation in foundation in ordinary soil (loam clay or sand) including lift upto 1.50 meter and lead upto 30 meter and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of sur-plus earth as directed by the Engineer incharge up to a distance of 30 meters from the foundation trenches. (a) in all kind of soil upto 1.5 m depth
1312.87
198
260565.31
... More
in all kind of soil upto 1.5 m to 3.0 m depth
19.2
295
5666.88
... More
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
1701.73
534
908911.01
... More
Providing and laying cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded Stone aggregate 40 mm nominal size) including supply of all materials, labour T & P rtc required for proper completion of the work and curing complete also including cost of formwork in foundation & floors.
291.7
5193
1515086.88
... More
Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineerin- Charge With material conforming to Grade-I (size range 75 mm to
0.075 mm) having CBR Value-30
850.87
2230
1897550.71
... More
Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 kms. from the site of work and including watering, dressing etc rate to include cost of all materials labour T & P etc required for proper completion of work.
88.75
1619
143713.76
... More
Providing and injecting chemical emulsion for pre constructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete.
(plinth area of the building at ground floor only shall be measured as per I.S.6313 (PartII 1981) Alderine emulsifiable concentrate or any other approved material such as Heptrachlor or Chlordane will be used. The rate of application of chemical emulsion shall be as follows : (1) Treatment for masonary & foundation 5 liters per sqm. (2) Back fill in immediate contact with foundation 7.5 liters/sqm (3) Treatment of top surface of plinth filling 5 liters/sqm (4) Treatment junction of wall and the floor 7.5 liters /sqm (5) Treatment of soil along external perimeter of building 7.5 liters/sqm (6) Treatment of soil under apron along external perimter 5 liters/sqm. (As per manufacturer's standard dilution)
598.74
236
141548.12
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)
70.65
6897
487285.06
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chaijjas, lintels, bands,plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
54.75
8772
480303.68
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) R.C.C.work in column
25.7
8275
212670.58
... More
Providing and laying in position ready mixed or site batched design mix cementconcrete for plain cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge; for the following grades of concrete.Concrete of M10 grade with minimum cement content of 220 kg /cum
31.16
6736
209912.46
... More
Class M-150 brick work in 1:6 cement coarse sand (of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work.
74.59
5438
405633.1
... More
M-150 brick work in 1:4 (one cement and four coarse sand sand of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour and T & P etc required for proper completion of the work.
437.46
5619
2458503.33
... More
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 13mm nominal size)
16.15
313
5059.15
... More
Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
16.15
111
1799.76
... More
Same as in item No. 11 above but in super-structure above plinth level up to floor two level ( up to two storeys ) including necessary cutting and moulding of brick work as required and also including honeycombed brick work in thickness of wall more than 12cms. (1:6 cement : coarse sand)
51.95
6943
360692.49
... More
TMT Bar or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and and over lapping & hooks. Fe 500
221.36
8223
1820311.9
... More
12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. (1) 1 cement : 6 coarse sand.
589.07
262
154354.01
... More
15mm thick plaster with cement mortar in proportion of 1:4 cement & coarse sand of 2.25 F.M.
548.77
313
172286.34
... More
15 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. 1 cement : 6 Course sand
472.73
301
142504.46
... More
15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall. Outer side
1981.24
385
764540.7
... More
Making drip coarse sand in sun shades or facia with 1:3 cement and fine sand mortar as per direction of Engineer-in charge including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.
63.52
59
3797.23
... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern.
5684.36
832
4730751.77
... More
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Ordinary cement without any pigment.
6.3
805
5074.27
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate
325.07
468
152233.53
... More
52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.
481.21
746
359006.72
... More
Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. 18 mm thick
3.68
504
1857.66
... More
25 mm thick Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :.
121.25
1485
180116.88
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
5.85
1795
10503.09
... More
Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. (a)Fabrication of hold fast for door chaukhats and windows.
14.4
99
1432.8
... More
(b)Fabrication of grill / railing.
833.39
167
139226.13
... More
(c)Fabrication of Z-section steel windows.
403.65
99
40163.18
... More
Fixing of Door, windows/ventilators chaukhats in position.(a) Window chaukhats
2
857
1715.8
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Electric resistance or induction butt welded tubes
866.64
148
128990.7
... More
Steel work in built up tubular (round, square or rectangular hollow Electric resistance or induction butt welded tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
13518.97
148
2003916.92
... More
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape
wherever required.
1291.6
563
727429.12
... More
Providing reinforced by organic fibres and/or inorganic synthetic fibres cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J or L hooks, bolts and nuts 8 mm dia. G.|. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required
51.75
408
21165.23
... More
Providing & fixing of Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.
42.66
864
36871.47
... More
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes
13.46
811
10926.42
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
10.98
172
1894.16
... More
Providing and applying white cement based putty of average thickness 1mm approved brand and manufacture over the plastic wall surface to prepare the surface even and smost complete.
1077.62
118
128215.23
... More
Finishing wall with water proof cement paint of approved make and quality on new wood with two coat to give an even shade including supply of all materials, labour, tools and plant etc. required for proper completion of the work. (Three Coat)
260.12
89
23184.5
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade. New work (Two or more coats applied @ 1.43 ltr/ 10 sqm. over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm).
1550.35
130
202258.66
... More
Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials.
301.4
141
42663.17
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
774.12
118
92104.8
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
410.17
172
70758.43
... More
Providing & laying "brick Coba" 120mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15mm to each other, over 20mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30 cm x 30 cm and side wall parapet shall be mono lythic plaster wall upto 30cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonry coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including S/o all material, labour T & P etc complete for proper completion of work.
719.24
1284
923842.2
... More
Fencing with R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side only, provided with horizontal lines and two diagonals of barbed wire weighing 9.38 kg per 100 metres (minimum), between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C. posts, struts, earth work and concrete to be paid for separately) :- Payment to be made per metre cost of total length of barbed wire used (a) With G.I. barbed wire.With G.I. barbed wire
49.65
10
529.77
... More
Supply & fixing of glass strips 40 mm wide and 4 mm thick laid in joints of CC flooring with 1:3 cement & C sand mortar complete.
1729.12
69
120969.24
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters 80x1.25 mm M.S. laths with 1.25 mm thick top cover
20.4
2785
56823.79
... More
Providing and fixing ball bearing for rollong shutters.
8
375
3003.28
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights :(a)Foundations, footings, bases of columns, etc. for mass concrete.
70.1
299
20960.6
... More
(b) Lintels, beams, plinth beams, girders, bressumers and cantilevers. with water proof ply 12 mm thick
276.65
641
177601
... More
(c)Suspended floors, roofs, landings, balconies and access platform. with water proof ply 12 mm thick.
133.08
784
104352.02
... More
(d)Columns,Pillars, Piers, Abutments, Posts and Struts.
216.88
732
158966.53
... More
Provding and fixing gun metal non return valve of approved quality, Vertical (screwed end) (a)50 mm Nominal bore
1
1045
1045.51
... More
(b) 25 mm Nominal bore
4
450
1803.72
... More
Providing & fixing G.I. pipes complete with G.I. fittings including tenching and refilling etc. for External work.(a)50 mm nominal bore.
100
581
58112
... More
(b)25 mm nominal bore.
65
356
23182.25
... More
Providing & fixing sand of grading zone V or coaser grade alround the G.I. Pipes in external work.(a)50 mm diameter pipe
100
132
13210
... More
(b)25 mm diameter pipe
65
122
7964.45
... More
Providing and fixing gate valve (with cap complete with bolts, nuts, rubber insertion etc.(a)50 mm nominal bore
1
782
782.8
... More
(b) 25 mm nominal bore
3
474
1423.71
... More
Constructing masonry Chamber with F.P.S. bricks 60x60x75 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement :4 coarse sand ) for sluice valve, with C.I. surface box 100mm top diameter, 160mm bottom diameter and 180mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design :
4
8282
33129.32
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :(a) 25 to 40 mm dia nominal bore
2
695
1390.6
... More
50 to 80 mm dia nominal bore
2
1361
2722.58
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking
arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (5000.00 X 2 NOS)
10000
8
83900
... More
Wiring points for light with 1 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sq. mm. FR PVC insulated multistrand copper earth contunity wire,piano type switch & ceiling rose/angle/batten holder on 3mm thick phenolic paminated backalite sheet etc.complete in all respects.as directed including matching colour wash.
34
1150
39115.98
... More
Wiring for light/ Power plug with 2X4 sq. mm FRLS PVC insuleted copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 Nos. 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
4
265
1063.68
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required (a)2 x 2.5 sq.mm. + 1 x 2.5 sq.mm. earth wire
10
218
2189.5
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed pvc conduit as required.
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
165
185
30609.15
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.(a)25 mm
10
115
1154.5
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (a)4 way Double door (4 + 12)
1
3257
3257.14
... More
Supplying and fixing Cable End Box (Loose wire box)(IP 43) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required (a).For 4 way, Double door TPN MCBDB
1
859
859.87
... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required (a) Single pole.
4
203
815.28
... More
Supplying and fixing , 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (a)40A, 4P
1
2275
2275
... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
3
10
31.05
... More
Supplying following 1.1kV grade, heavy duty XLPE insulated, FRLS type armoured /Unarmured cables suitable for 415V, 50Hz, AC system, with inner and outer PVC sheath, outer sheath provided with FRLS insulation, galvanised steel armouring (round or flat as mentioned) and with all components as mentioned in BOQ, specifications and schedule, complete as required. (a)16 sqmm 4 core
5
343
1715
... More
(b)10 sqmm 4 core
60
327
19620
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.(a)4 X 16 sq. mm (28mm)
2
296
592.04
... More
(b)4 X 10 sq. mm (25mm)
2
214
428.34
... More
Supply & fixing of single light wall bracket on matching M.D.F.E.G. board base etc. complete in all required. Cat. AAA
10
1650
16500
... More
Supply & fixing LED tube light with batten suitable for upto 1x 22 watt LED tube light fitting including tubes on surface complete in all respect.
Cat. AAA
15
1190
17850
... More
Supply and fixing of 6 Amp to 32 Amp MCB(10KA)C Curve.
6 - 32 amps.Cat. A
35
260
9100
... More
Supply and laying of aluminium conducter CABLE, PVC insulated armoured, served, sheeted cable 1100 volts grade at a depth of 750mm below ground level over a cushion of 75 mm thick sand alround and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on M.S. clamps etc. of suitable size. or as directed by the Engineer-Incharge, complete in all respect. the armouring of the cable shall be properly connected with the earth conductor by clamps etc. (a)10.0 sq mm 2 core
75
292
21900
... More
Erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. down rod 19mm dia duly painted, complete in all respects.
5
140
700
... More
Supply & fixing of 16 gauge M.S.drum duly painted including making hole in the wall for exhaust fan and finishing properly etc. complete as required.
5
810
4050
... More
Supply fixing of electronic fan regulator (Modular) 120-280 V. ISI marked, on the existing switch board including making connetion, required material, labour T/P etc for proper completion of work to the satisfaction of Engineer in charge of work.
5
517
2585
... More
Supply & erection of AC 1200mm Sweep, 230/250 Volts, 50 Hz ceilling fan with standard down rod, blades including connection etc. complete as required-.
5
1800
9000
... More
Supply and erection of AC 230/250 Volts, 50 Hz exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required , 375mm sweep.
4
2250
9000
... More
Supply & fixing of 10 mtr GI Octagonal Pole of approved make (top dia 100 mm, Bottom dia 200 mm and base plate 16mm thick) having 3 mm thikness with Double arm bracket 1 Mtr length in 1:2:4 RCC foundation bolt including the cost of foundation, excavation & back filling and Required T&P completee in all respect.
5
28460
142300
... More
Supply and burying of safe earthing electrode T-19 (Hot Dip Galvanized) length upto 3000 mm, outer G.I. Pipe 76 mm, Inner Pipe Dia 25, terminal dia 12mm, outer G.I. pipe of 16SWG and inner G.I. pipe of 12 SWG with Hot Dip Galvanized up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive and conductive property with 50 Kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25 mm x 3 mm G.I. strip upto switch board ( from apron to switch board the cost G.I. strip will extra )along with 30cm square C.I. frame with hinged over & masonry husing .
5
12000
60000
... More
Supply of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following sizes as required complete with in all respect.(a)25 sq. mm 4 core
75
350
26250
... More
Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. (a) Size25 Sq mm x 3.5core
10
115
1150
... More
Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. (a)Size25 Sq mm
20
27
540
... More
Supply and laying of 32mm x 6mm copper strip from earth electrode directly in the ground as required complete in all respect
75
90
6750
... More
Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required
75
1083
81264
... More
Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium ousing built with dirver set suitable for 170 to 200 Watt. Confirming to IP 66 protection complete in all respect.
20
5800
116000
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire
75
265
19944
... More
S&F of 32 Amp. 415 V metal clad TPN rewireable type switch fuse unit on M.D.F.E.G. / Teak wood board complete in all respect. Encloser Box
5
4000
20000
... More
11 KV DOUBLE POLE STRUCTURE Supply, erection, testing and commissioning of 2 pole structure for providing 1 No. 11KV,400A GOS in accordance with IE rules, & local authority specification and drawings and comprising of the following.
a. 2 Nos. 11 mtr. long MS STEEL poles complete with, pole excavation, MS STEEL foundation, and back filling complete MS steel channel/angle iron etc.
b. 1 Set of cross arms, branching, clamps and painting complete with GI nut, bolts & washers as required (for GO & DO), LA connection.
c .1 set 11KV Insulator complete with spindles & hardware & DOG 11KV ACSR conductors complete as required.
d .1 No. 11KV 400A TP Gang operated Air break switches complete with 25mm dia GI pipe operating machanism, handle & locking arrangement.
e. 1 set of 3 nos.11KV single pole drop out fuse complete with barrel fuses, and mounting arrangement.
f. 1 set (3 nos.) 11KV lightning arrestor and connecting to all phases.
g. 1 No. 150 mm dia GI pipe class 'B' (for XLPE cable protection) as required.
h. 2 Set 50mm dia 3m long GI pipe earting with 25 x 6 mm GI earth strip complete as required (for GO & DO & LA)
i 1 nos. 11KV HT danger boards and 2 set of anticlimbing devices. 11 KV Double Pole Structure
1
85000
85000
... More
(A)OUTDOOR TYPE HT Panel Three Way, 11kV, 800Amps 21kA for 3 sec., SF6 insulated Non-Extensible Compact switchgear (Type CCT2 ) consisting of Two Nos. Fixed Isolators & One No. Fixed Vacuum Circuit Breaker in SF6 insulated Stainless steel enclosure with self-powered series trip microprocessor base numerical over current & earth fault relay (IDMTL+Inst.) for protection (AS Per SLD) B. OUTGOINGS :1 No. VCB each having following
1 No. 630A, 11kV, 3 Phase, 50Hz., metal clad, dead front, 350 MVA rupturing capacity, Fully Drawout type, Vacuum Circuit Breaker (VCB)
1 set of 11kV/110V Potential Transformers with HRC fuses
1 Set of Phase indicating lamps with HRC fuses
1 No. 0-15 kV Digital voltmeter with selector switch
1 set of indicating lamps to indicate OPEN, CLOSE, TRIP,SPRING CHARGED, TRIP CIRCUIT HEALTHY
Push button for ON, OFF,TRIP&TRIP circuit healthy
1 set of 100/5-5A Current Transformer for metering and protection
Digital Multifunction meter (KVA,KWh,P.F,Amp.,Voltage)
(a) 3 Over Current + 1 Earthing fault (50/51/50N/51N ) + Over voltage (59) + Under voltage (27) and master trip relay. (b) Lockout relay, supervisionary trip relay. Accessaries
Push button trip circuit healthy cheak
Panel illumination lamp with switch.
3 pin plug with socket of 15Amp.
Local/Remote switch
8 window Aunnciation with hooter
Emergency Trip Button
MCB for AC & DC
BUSBARS : 11kV, 350 MVA, 630 Amps Three Phase busbars of copper H.T. Panel described as above
1
1357400
1357400
... More
RMU HT SWITCHGEAR Three Way, 11kV, 630Amps 21kA for 3 sec., SF6 insulated Non-Extensible Compact switchgear (Type CCT2 ) consisting of Two Nos. Fixed Isolators & One No. Fixed Vacuum Circuit Breaker in SF6 insulated Stainless steel enclosure with self-powered series trip microprocessor base numerical over current & earth fault relay (IDMTL+Inst.) for protection RMU-NON-Extensible FBX-C /CCT2(2 isolators (C), 1 Vacuum circuit breaker(T2) with AL Busbar)-BIL 28/75kV
C FUNCTION Type:- 3 position Disconnector and Earthing switch equipped with
separate drive unit.
1. Operation of LBS- Manual
2. Cable Switch Rating- 12KV, 630A, 21/3sec.
3. Cable Bushing Rating- 630A,
4. Cable Cover:- As per our standard,
5. Fixed type Capacitive voltage indication-
6. ON/OFF/Earth indication on the front mimic of the panel.
7. Bottom Cable Termination- Suitable upto 3 No 1C X 240sqmm Cu,
8. Cable Entry-Bottom,Front
T2 FUNCTION Type:- 3 position Disconnector and Earthing switch equipped with
separate drive unit. T2 equipped with over current time release for transformer protection.
1. Vacuum circuit breaker 12 kV,630 A, 21/4sec.
2. Operation of breaker – Manual
3. Self Powered Electronic numerical protection relay providing over-current & earth
fault protection –C&S make CSDPR/SEIL Make DPX-V5
4. Tape Wound protection current transformers(Details During Detailed Engineering)
5. Capacitive voltage indication fixed type.
6. ON, OFF, EARTH indication on the front mimic of the panel.
7. Cable box for termination of cable
8. Cable cover standard.
9. Emergency trip push button.
10. Shunt trip Coil - 230VAC RMU Accessories Operating Handle - 1 No. Manometer for SF6 gas pressure indication.Right Angled Cable Boots suitable for 3 Run x 1 C x 240 Sq mm
2
274780
549560
... More
TRANSFORMER (Manufactured as per IS -1180 Level-2)
TYPE:- ONAN, Hermatically sealed corrugated tank (WITH VEGETABLE TRF OIL)
1. Ratio- 11 KV/433V,
2. Capacity:- 1250 KVA,
3. Vector Group- DYn11,
4. Off Load Tappings +5% to -10% in steps of 2.5%,
5. Winding- Double Wound Copper,
6. Class of Insulation- A,
7. Ambient Temperature- 50 Deg C,
8. Temperature rise in oil over ambient- 40 Deg C
9. Temperature rise in winding over ambient- 50 Deg C
9. Load Losses- 980 Watts Max (@ 50% loading),
10. Full Load Losses- 2930 Watts Max (@ 100% loading),
11. %Impedance- 4.5 % (IS Tolerance)
Transformer Accessories-Oil Temperature Indicator
2
3401470
6802940
... More
MAIN LT PANEL Incomer 2000 A, ACB, 4 Poles, Fixed Manual, 50 KA, Motorised based release for O/C,S/C,ST,UV & E/F Protection On, OFF, TRIP lamps -R/Y/B indicating lamps- MFM 2000/5A,CL0.2,2.5VA Outgoing
400 Amp. 35KA TPN MCCB - 06 No.
250 Amp 35 KA TPN MVB - 01 No INSTRUMENTS
1 set of multifunction of meter with RS 485 port.
1 Sets of phase indicating lights (RYB) with protection fuses (one set for each incoming breaker).
1 Sets breaker 'ON' & 'OFF' indicating lamp (one set for each incoming breaker).
1 Sets auto trip indicating lamp .
Energy meter is supplied seperately cost of the meter as approved in department.
3 Sets breaker 'ON' & 'OFF' indicating lamp (one set for each incoming breaker).
3 Sets auto trip indicating lamp .
Note: All outgoings should have ammeter and RYB indications with backup MCB as indicated in single line diagrams.
RELAYS AS PER SLD
2
501653
1003306
... More
Earthing G.I. Earth plate Electrode: Earthing with G.I. earth plate 600 mm x 600 mm x 6 mm thick including accessories , and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but with charcoal or coke and salt) as required.
18
6450
116100
... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. (but with charcoal/ coke and salt ) as required
6
12342
74052
... More
Earthing with G.I. pipe 4.5m long, 40mm dia including all accessories and providing mesonry encloser with cover plate having locking arrengement and watering pipe etc. (but with charcoal or coke and salt) as required.
4
4653
18612
... More
Supply and laying of 6SWG GI earth wire at 0.50m below ground level for conductor earth electrode, including connection/termination with GI themble as required.
300
39
11700
... More
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
120
885
106200
... More
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
180
181
32580
... More
CABLE & END TERMINATION Supply of 3 core standered aluminium conductor XLPE insulated PVC bedded,Galvanised flat steel strip armound cables confirming to IS 7098 II KV grade (A)3 Core 240 sq.mm
180
1681
302580
... More
Supplying and making indoor cable end jointing with cast resin compound, including lugs and other jointing materials, for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : (A) 240sq. mm
20
3800
76000
... More
SAFETY EQUIPMENTS Supplying and Fixing of Fire buckets, round bottom made of G.I. Sheet 9-11 litres capacity duly painted as per fire brigade design, supported on hanging bracket chained and locked, initially filled with fine river sand, water as per directions of Engineer-in-charge.
2
490
980
... More
Supplying & Laying of 1800 mm x 900 mm X 12 mm thick chequered rubber matting of tested quality
4
2550
10200
... More
Supply and fixing danger board fabricated from 10 gauge MS sheet as per IE Rules
2
85
170
... More
S/F of shock treatment chart (prescribed under I.E.rules) duly framed with glass and supported from back with hard board or soft board with supply of all material labour T & P for proper completion of work.
2
305
610
... More
Supply and fixing of fire extinguishers, ABC Type 4.00 kg. capacity(ISI Marked IS : 15683 & TAC approved) complete with initial charges and wall bracket, along with supply of all materials and labour for proper completion of work.
2
7860
15720
... More
Supply and fixing of CO2 type fire extinguishers, 4.50 kg. capacity(ISI Marked IS : 2878 & TAC approved) complete with initial charges and wall bracket, along with supply of all materials and labour for proper completion of work.
2
11980
23960
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%