Uttar Pradesh State Industrial Development Authority Tender

... More
The UPSIDA has issued a formal invitation for competitive bids for the Uttar Pradesh State Industrial Development Authority project, for Providing 11 Kv Ht Underground Power Network System At Industrial Area Spining Mill Distt. Barabanki. in Barabanki, Uttar Pradesh, with an estimated contract value of Rs. 2,53,59,331. The bid opening date for this tender is 21-03-2025 and the last date for bid submission is 10-04-2025. Interested bidders for Uttar Pradesh State Industrial Development Authority tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Uttar Pradesh State Industrial Development Authority - UPSIDA Tender

Opening Date21 Mar 2025
Closing DateCancelled
Tender Amount₹ 2,53,59,331 
Notes
Download

AI Insights

Class Of Bidder
... View More
A class approved license issued by the Directorate of Electrical Safety of Uttar Pradesh, specifically for electrical works.
Technical Capacity
... View More
The required prior work experience for the bidder includes having successfully completed works with government departments or similar entities during the last 07 years for similar nature of works. The experience can be in one of the following forms: - One work equal to a minimum of 80% of the bid value, with a value of at least Rs. 2,39,39,209/- - Two works equal to a minimum of 60% of the bid value, with a value of at least Rs. 1,79,54,407/- - Three works equal to a minimum of 40% of the bid value, with a value of at least Rs. 1,19,69,604/- Alternatively, the bidder can have: 1. At least 03 jobs each of similar nature of value not less than 40% of the estimated cost of work, completed within last 07 years, which is Rs. 1,19,69,604/-. 2. At least 02 jobs each of similar nature of value not less than 60% of the estimated cost of work, completed within last 07 years, which is Rs. 1,79,54,407. 3. At least 01 job of similar nature of value not less than 80% of the estimated cost of work, completed within last 07 years, which is Rs. 2,39,39,209/-. For works above Rs. 10 Lakh, the experience needed is as follows: - One work equal to minimum 80% of bid value completed in last seven years. - Two works equal to minimum 60% of bid value completed in last seven years. - Three works equal to minimum 40% of bid value completed in last seven years. The bidder should submit a completion certificate issued by the client for the similar nature of works completed.

Costs

Description

Unlock the Tender details for free
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Unlock the Tender details for free

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

View all details for FREE
... More
Lettering with black Japan paint of approved brand and manufacturer.

600

1

-

... More
Supply & fixing of 11 KV straight through jointing kit heat shrinkable type for 11 KV cable including cost of all material,labour, T&P etc. for proper completion of work (Raychem/Denson/Birla/3M make) for 3 x 185 sq.mm cable.

6

4882

-

... More
S/F of outdoor/indoor type 11 KV jointing kit heat shrinkable type for 11 KV cable including cost of all material, labour, T&P etc. for proper completion of work. (Raychem/Denson/Birla /3M make) for 3 x 185/70 sq.mm cable.

48

6350

-

... More
Finishing with epoxy paint (two coat or more coat) at all location prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface etc. complete on concrete work.

30

108

-

... More
Fabrication,Supply & Fixxing of work information board in M.S frame made by 50 mm dia sqaure pipe of stainless steel grade SS-304 &16 mm thick base plate with back supporting of bracing by MS flat of 25x6 mm and 2.85 Mtr. Long supporting leg made from 65mm pipe SS-304 grade with proper grouting arrangement. The board should be Retro reflective type in green colour with white letters as required and shall be fixed at a height of 1.2 Mtr. from ground by providing 0.45x0.45x0.60 Mtr. cement concrete stone pad.

1

35593

-

... More
S/Laying of 200 mm dia MS pipe ISI marked 6 mm thick as per IS 2062 grade Fe-400 including welding etc.complete laying with Bogi method , cost of all T&P men & material for proper completion of work complete in all respect.

312

1945

-

... More
S/B of 600x600x6mm G.I. plate vertically for earthing with its top at least 3 M. below ground level complete with 20 mm dia G.I.pipe and funnel for watering and one earthing lead of one no. 8 to 10 SWG GI wire in 15 mm dia G.I.pipe up to switch board ( from appron to switch board the cost of G.I.pipe and G.I. wire be extra) 30 cm square C.I. frame with hinged cover masonry housing alternate layers of charcole /Coke and salt at least 150mm thick around etc. as per directions of E/I complete in all respect as per UPPWD Sch. No. 702

33

5350

-

... More
S/L of standard aluminium conductor XLPE (cross linked polyethylene) insulated PVC bedded glavanised flat steel strip armoured cables confirming to IS 7098 (Part-II) with latest amendments, 11 KV grade at a depth of 900 mm below ground level. The armouring of cable shall be properly connected with earth conductor by clamp etc.(Gloster/Havells/Grandlay/Polycab/KEI make) (185 sq. mm 3 core cable) (When cable is passed through pipe)

4850

1493

-

... More
Supply & fixing of welded wire mesh fencing of 5x3x2.4 meter and 2x2.4 M gate including excavation base concrete & brick work with back filling etc. complete in all respect.

11

32000

-

... More
S/L of standard aluminium conductor XLPE (cross linked polyethylene) insulated PVC bedded glavanised flat steel strip armoured cables confirming to IS 7098 (Part-II) with latest amendments, 11 KV grade at a depth of 900 mm below ground level over a cushion of 100 mm thick fine river sand all around and protected with well burnt bricks on sides and on top put across . The armouring of cable shall be properly connected with earth conductor by clamp etc.(Gloster/Havells/Grandlay/Polycab/KEI make) (185 sq. mm 3 core cable)

384

1663

-

... More
Supply, laying and fixing 150 dia GI pipe B Class for climbing up the cable to double pole with GI Fittings complete in all respect.

18

788

-

... More
Constructing brick masonry chamber (inside dimentions 900x800 mm and 60 cm deep for single pipe line) for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover with frame to be not less than 38 Kg. (weight o'cover 23 Kg. and weight of frame 15Kg.) R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design.

6

9617

-



Evaluation Notes How It Works ?

Potential Partner

Select Your Requirements

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.